Effects of Irrigation Amount on Grain Starch Content, Starch Synthase Activity, and Water Use Efficiency in Wheat

2009 ◽  
Vol 35 (2) ◽  
pp. 324-333 ◽  
Author(s):  
Peng-Fei CHU ◽  
Zhen-Wen YU ◽  
Xiao-Yan WANG ◽  
Tong-Hua WU ◽  
Xi-Zhi WANG
2020 ◽  
Author(s):  
Shenglin Wang ◽  
Chen Luo ◽  
Yue Xie ◽  
Xiaotang Jiang ◽  
Yixin Wang ◽  
...  

Abstract Background: Traditional irrigation methods in protected vegetable production such as furrow irrigation result in low water use efficiency. New techniques, such as drip irrigation, micro-sprinkling irrigation have been developed for improving water use efficiency. However, these techniques have not been tested in greenhouse celery production. In this study, three different irrigation techniques micro-sprinkler irrigation (MS), furrow irrigation under plastic film mulching (PF) and micro-sprinkler irrigation under the plastic film mulching (MSP) were investigated whether the three techniques can improve the yield, quality and water use efficiency of greenhouse-grown celery, compared to furrow irrigation (FI). Results: The individual plant weight of celery was higher under MS, PF and MSP than under FI in both autumn season crop (AC) and spring season crop (SC), compared to FI. In AC and SC, the economic yield of celery increases under MSP by 54.18% and 49.55%, the economic yield of celery increases under PF by 30.37% and 34.10%. The irrigation amount of MSP was 151.69 and 179.91 m3 667 m-2 in AC and SC, which was 23.13% and 27.27% lower than that of FI. The irrigation amount of PF was 151.69 and 196.78 m3 667 m-2 in AC and SC, which was 23.13% and 20.45% lower than that of FI. PF and MSP reduced the irrigation amount of celery cultivation in greenhouse, and soil evaporation content. Conclusions: In short, MSP and PF promoted the growth and yield of celery in greenhouse with improved quality and water use efficiency.


2013 ◽  
Vol 129 ◽  
pp. 173-180 ◽  
Author(s):  
Xiuwei Liu ◽  
Liwei Shao ◽  
Hongyong Sun ◽  
Suying Chen ◽  
Xiying Zhang

Water ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1721
Author(s):  
Koffi Djaman ◽  
Daniel Smeal ◽  
Komlan Koudahe ◽  
Samuel Allen

Alfalfa is one of the most nutritive and high-yielding forage legumes planted in rotation with cereal crops across the United States. Under semiarid and arid climates with limited water resources, sustainable management of the available resources is required. The objective of this study was to investigate the effect of different irrigation regimes and fungicide applications on alfalfa in the high desert region of the Colorado Plateau of the U.S. Field experiments were conducted during the 2012–2014 period. Alfalfa was planted in fall 2012, uniformly irrigated for crop establishment and subjected to seven different irrigation regimes after the first cut in spring 2013. Alfalfa was treated by fungicide application and was harvested at 10% blooming. The maximum amounts of applied water were 350, 300, 208, and 312 mm, respectively, during the first, second, third, and fourth regrowth cycles in 2013, and 373, 282, 198, and 246 mm in 2014 for the respective regrowth cycles in 2014; the seasonal applied irrigation amount varied from 711 to 1171 mm in 2013 and from 328 to 1100 mm in 2014. The results showed non-significant effect of fungicide application on the forage yield. Alfalfa forage yield was significantly affected by the irrigation regimes and showed a third order polynomial relationship with the applied irrigation amounts during each regrowth cycle and on seasonal scale. Forage yield decreased from the first cut to the fourth cut and the annual forage varied from 10.6 to 25.7 Mg/ha for the treated alfalfa and from 11.5 to 25.6 Mg/ha for the non-treated alfalfa. Forage yield at each cut accounted for 39.6, 24.2, 17.6, and 18.6% of the 2013 season forage yield and 31.4, 23.8, 21.6, and 23.2% of the 2014 season forage yield, for the first, second, third, and fourth cut, respectively. Alfalfa water use efficiency varied from 0.06 to 3.3 kg/m3. The relationships developed in this study could be used by forage growers, crop consultants, and project managers for decision making and planning to improve the productivity of water under the semiarid and arid climate of New Mexico and the surrounding regions.


Agronomy ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 624
Author(s):  
Jianfang Guang ◽  
Xiaohou Shao ◽  
Qisong Miao ◽  
Xu Yang ◽  
Chao Gao ◽  
...  

This study aimed to determine the effect of irrigation amount and irrigation frequency on drip-irrigated flue-cured tobacco evapotranspiration (ETa), yield, and water use efficiency. Four irrigation treatment levels were imposed: 100% IRT (fully irrigated treatment, no stress), 85% IRT, 70% IRT, RFT (rainfed treatment), and high, medium, and low irrigation frequencies were set. The relationship between irrigation volume and yield is a quadratic curve. The evapotranspiration had a positive relationship with the irrigation amount. The yield of flue-cured tobacco was the highest in 2016 (wet year), and the corresponding ETa was the smallest. The irrigation water use efficiency (IWUE) in the driest year, 2017, was lower than IWUE in the wet years 2015 and 2016, and the crop water use efficiency (CWUE) had similar results for the three years. IWUE increased with irrigation amount. The effect of irrigation frequency on CWUE was not significant. The CWUE had a positive relationship with yield. No significant differences due to irrigation frequency were found for yield.


Water ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 2602 ◽  
Author(s):  
Chao Xiao ◽  
Meng Li ◽  
Junliang Fan ◽  
Fucang Zhang ◽  
Yi Li ◽  
...  

Low water use efficiency and soil salinization are two main factors limiting cotton production in southern Xinjiang. A field experiment was conducted to investigate the effects of brackish water irrigation levels on cotton growth, yield and soil water–salt dynamics in southern Xinjiang, so as to provide a theoretical and experimental basis for the development and utilization of brackish water. There were three irrigation levels: W1 (75 mm + 80%ETc), W2 (150 mm + 80%ETc) and W3 (240 mm + 80%ETc) at the seeding stage (S1), seeding stage + budding stage (S2) and seeding stage + budding stage + flowering stage (S3), with an irrigation amount of 450 mm during spring as the CK (the local reference level) (10 treatments in total). The salt of the local brackish water used was 3 g·L−1. Film-mulched drip irrigation experiments were conducted to observe cotton growth, aboveground dry matter, cotton yield, soil water and salt distribution, as well as other indicators. The results showed that the irrigation applications of S3 can improve the soil moisture and salt distribution of the root zone. The salt accumulation at the harvest stage of W3S3 was reduced by 39.5% and 2.8% compared with W3S1 and W3S2, respectively. More frequent irrigation applications can reduce a soil’s total dissolved solids (TDS), avoid exceeding the salt tolerance threshold of 4.8 g kg−1 and lead to higher aboveground dry matter and cotton yields. W3S3 obtained the highest yield of 5685 kg ha−1, which was increased by 39.59%, 7.85% and 11.25% compared with W3S1, W3S2 and CK, respectively. The higher the irrigation amount, the less water use efficiency (WUE), following the order of S3 > S2 > S1 > CK at various growth stages. W3S1 obtained the lowest WUE of 0.64 kg·m−3. Comprehensively considering the effects of soil moisture retention and salt suppression, cotton growth, yield and water use efficiency, an irrigation amount of 240 mm brackish water at three growth stages, with 80%ETc for irrigation, is recommended for the sustainable production of cotton in southern Xinjiang.


Sign in / Sign up

Export Citation Format

Share Document