scholarly journals THE INFLUENCE OF NEAR INFRARED STIMULATION ON THE GERMINATION ENERGY AND GERMINATION CAPACITY OF SELECTED PARSLEY VARIETIES

2018 ◽  
Vol 78 ◽  
pp. 23-36
Author(s):  
Katarzyna Niemczyk ◽  
Barbara Kmiecik ◽  
Jerzy Detyna ◽  
Henryk Bujak

A variety of different physical methods are used increasingly frequently to improve the quality of theseeds material. Numerous publications confirm the positive effect of, for example, the magnetic field witha frequency of 50 Hz on the germination of seeds. However, there are no significant reports regarding theimpact of NIR radiation on the growth and development of plants. To fill this gap the influence of three dosesof near-infrared seeds stimulation was tested under laboratory conditions. The power density was 6.9mW/cm2. The used seeds encompassed four parsley varieties: Konika, Osborne, Alba and Hanácká. Both the influenceof the used variety as well as the radiation dose on parsley germination were tested. The obtained resultsindicate that the stimulation affects the selected parsley varieties.

1990 ◽  
Vol 140 ◽  
pp. 327-328
Author(s):  
M. Tamura ◽  
S. Sato

Infrared polarimetry is one of the most useful methods to delineate the magnetic field structure in dark clouds and star-forming regions, where the intracloud extinction is so large that optical polarimetry is inaccessible. We have been conducting a near-infrared polarization survey of background field stars and embedded sources toward nearby dark clouds and star-forming regions (Tamura 1988). Particularly, the magnetic field structure in the denser regions of the clouds are well revealed in Heiles Cloud 2 in Taurus, ρ Oph core, and NGC1333 region in Perseus (Tamura et al. 1987; Sato et al. 1988; Tamura et al. 1988). This survey also suggests an interesting geometrical relationship between magnetic field and star-formation: the IR polarization of young stellar sources associated with mass outflow phenomena is perpendicular to the magnetic fields. This relationship suggests a presence of circumstellar matter (probably dust disk) with its plane perpendicular to the ambient magnetic field. Combining with another geometrical relationship that the elongation of the denser regions of the cloud is perpendicular to the magnetic field, the geometry suggests that the cloud contraction and subsequent star-formation have been strongly affected by the magnetic fields. Thus, it is important to study the universality of such geometrical relationship between IR polarization of young stellar sources and magnetic fields. In this paper, we report the results on a 2 micron polarization survey of 39 T Tauri stars, 8 young stellar objects and 11 background field stars in Taurus dark cloud complex.


2012 ◽  
Vol 10 (H16) ◽  
pp. 387-387
Author(s):  
S. Nishiyama ◽  
H. Hatano ◽  
T. Nagata ◽  
M. Tamura

AbstractWe present a large-scale view of the magnetic field (MF) in the central 3° × 2° region of our Galaxy. There is a smooth transition of the large-scale MF configuration in this region.


Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5925
Author(s):  
Voitech Stankevic ◽  
Joern Lueg-Althoff ◽  
Marlon Hahn ◽  
A. Erman Tekkaya ◽  
Nerija Zurauskiene ◽  
...  

The possibility of applying CMR-B-scalar sensors made from thin manganite films exhibiting the colossal magnetoresistance effect as a fast-nondestructive method for the evaluation of the quality of the magnetic pulse welding (MPW) process is investigated in this paper. This method based on magnetic field magnitude measurements in the vicinity of the tools and joining parts was tested during the electromagnetic compression and MPW of an aluminum flyer tube with a steel parent. The testing setup used for the investigation allowed the simultaneous measurement of the flyer displacement, its velocity, and the magnitude of the magnetic field close to the flyer. The experimental results and simulations showed that, during the welding of the aluminum tube with the steel parent, the maximum magnetic field in the gap between the field shaper and the flyer is achieved much earlier than the maximum of the current pulse of the coil and that the first half-wave pulse of the magnetic field has two peaks. It was also found that the time instant of the minimum between these peaks depends on the charging energy of the capacitors and is associated with the collision of the flyer with the parent. Together with the first peak maximum and its time-position, this characteristic could be an indication of the welding quality. These results were confirmed by simultaneous measurements of the flyer displacement and velocity, as well as a numerical simulation of the magnetic field dynamics. The relationship between the peculiarities of the magnetic field pulse and the quality of the welding process is discussed. It was demonstrated that the proposed method of magnetic field measurement during magnetic pulse welding in combination with subsequent peel testing could be used as a nondestructive method for the monitoring of the quality of the welding process.


Author(s):  
A. V. Pastukhova ◽  
I. Е. Lavrishchev ◽  
A. F. Petrov ◽  
V. Р. Tsvetkova ◽  
V. S. Maslenikova

The results of studying the influence of various biological and mineral fertilizers: Phytop 8.67, Agrofit-humate-B (BKG «AFG-B”) – on the growth and development of plants, as well as the yield and quality of kiwano fruits of the Green Dragon variety are presented. During the study, phenological and morphological observations, accounting and evaluation of the quality of the obtained fruits, analysis of the chemical composition of the fruits were carried out. The obtained data confirmed the positive effect of the use of biological preparations on the structure and quality of the resulting crop of kiwano, which will allow us to recommend this crop for cultivation in the territory of the Novosibirsk region, using experimentally proven methods and norms of fertilizer application during the growing season of plants.


Author(s):  
Joseph E. Borovsky

In this report some properties of the electron strahl at 1 AU are examined to assess the strahl at 272 eV as an indicator of the quality of the magnetic connection of the near-Earth solar wind to the Sun. The absence of a strahl has been taken to represent either a lack of magnetic connection to the corona or the strahl not surviving to 1 AU owing to scattering. Solar-energetic-electron (SEE) events can be used as indicators of good magnetic connection: examination of 216 impulsive SEE events finds that they are all characterized by strong strahls. The strahl intensity at 1 AU is statistically examined for various types of solar-wind plasma: it is found that the strahl is characteristically weak in sector-reversal-region plasma. In sector-reversal-region plasma and other slow wind, temporal changes in the strahl intensity at 1 AU are examined with 64 s resolution measurements and the statistical relationships of strahl changes to simultaneous plasma-property changes are established. The strahl-intensity changes are co-located with current sheets (directional discontinuities) with strong changes in the magnetic-field direction. The strahl-intensity changes at 1 AU are positively correlated with changes in the proton specific entropy, the proton temperature, and the magnetic-field strength; the strahl-intensity changes are anti-correlated with changes in the proton number density, the angle of the magnetic field with respect to the Parker-spiral direction, and the alpha-to-proton number-density ratio. Reductions in the strahl intensity are not consistent with expectations for a simple model of whistler-turbulence scattering. Reductions in the strahl intensity are mildly consistent with expectations for Coulomb scattering, however the strongest-observed plasma-change correlations are unrelated to Coulomb scattering and whistler scattering. The implications of the strahl-intensity-change analysis are that the change in the magnetic-field direction at a strahl change represents a change in the magnetic connection to the corona, resulting in a different strahl intensity and different plasma properties. An outstanding question is: Does an absence of an electron strahl represent a magnetic disconnection from the Sun or a poor strahl source in some region of the corona?


2019 ◽  
Vol 31 (2) ◽  
pp. 355-364
Author(s):  
Rogelio Enrique Palacios-Torres ◽  
Aldo Guadalupe Bustamante-Ortiz ◽  
Luis Alberto Prieto-Baeza ◽  
Hipólito Hernández-Hernández ◽  
Ana Rosa Ramírez-Seañez ◽  
...  

AbstractThe quality of tomato fruits is influenced by preharvest factors. Trichoderma are considered biostimulants with potential to improve growth and development in plants, as well as the quality of the fruits. The objective of this study was to evaluate the effect of foliar application of Trichoderma on the quality of tomato fruits at different cluster levels on the same plant in two commercial hybrids using three different substrates in a greenhouse. Six foliar applications of a liquid biological preparation of Trichoderma were performed at a dose of 4 mL L−1 every 15 days after transplanting. The results show that the foliar application of Trichoderma increased the ratio of soluble solids to titratable acidity of the fruits at different cluster levels, which was mainly due to the decrease in acidity rather than the increase in soluble solids. The decrease in titratable acidity is in accordance with the increase in the pH of the fruits. Trichoderma have a positive effect on titratable acidity, pH and electrical conductivity of fruits. In the Cid hybrid grown in the tezontle substrate, the application of Trichoderma increased the ratio of total soluble solids to titratable acidity. At the same time, sand increased the percentage of juice in the fruits. Foliar application of Trichoderma increases the quality of tomato fruits, and as such, should be considered as a crop management option.


2020 ◽  
Vol 638 ◽  
pp. A25
Author(s):  
P. Lindner ◽  
R. Schlichenmaier ◽  
N. Bello González

Context. The vertical component of the magnetic field was found to reach a constant value at the boundary between penumbra and umbra of stable sunspots in a recent statistical study of Hinode/SP data. This finding has profound implications as it can serve as a criterion to distinguish between fundamentally different magneto-convective modes operating in the sun. Aims. The objective of this work is to verify the existence of a constant value for the vertical component of the magnetic field (B⊥) at the boundary between umbra and penumbra from ground-based data in the near-infrared wavelengths and to determine its value for the GREGOR Infrared Spectrograph (GRIS@GREGOR) data. This is the first statistical study on the Jurčák criterion with ground-based data, and we compare it with the results from space-based data (Hinode/SP and SDO/HMI). Methods. Eleven spectropolarimetric data sets from the GRIS@GREGOR slit-spectograph containing fully-fledged stable sunspots were selected from the GRIS archive. SIR inversions including a polarimetric straylight correction are used to produce maps of the magnetic field vector using the Fe I 15648 Å and 15662 Å lines. Averages of B⊥ along the contours between penumbra and umbra are analyzed for the 11 data sets. In addition, contours at the resulting B⊥const are drawn onto maps and compared to intensity contours. The geometric difference between these contours, ΔP, is calculated for each data set. Results. Averaged over the 11 sunspots, we find a value of B⊥const = (1787 ± 100) gauss. The difference from the values previously derived from Hinode/SP and SDO/HMI data is explained by instrumental differences and by the formation characteristics of the respective lines that were used. Contours at B⊥ = B⊥const and contours calculated in intensity maps match from a visual inspection and the geometric distance ΔP was found to be on the order of 2 pixels. Furthermore, the standard deviation between different data sets of averages along umbra–penumbra contours is smaller for B⊥ than for B∥ by a factor of 2.4. Conclusions. Our results provide further support to the Jurčák criterion with the existence of an invariable value B⊥const at the umbra–penumbra boundary. This fundamental property of sunspots can act as a constraining parameter in the calibration of analysis techniques that calculate magnetic fields. It also serves as a requirement for numerical simulations to be realistic. Furthermore, it is found that the geometric difference, ΔP, between intensity contours and contours at B⊥ = B⊥const acts as an index of stability for sunspots.


Author(s):  
Takayoshi Kusune ◽  
Koji Sugitani

AbstractWe have made near-infrared (JHKs) imaging polarimetry toward 24 bright-rimmed clouds in the southern hemisphere in order to reveal their magnetic field structures. The obtained polarization vector maps show that the magnetic field directions inside the bright rim are different from its ambient magnetic field direction, implying that magnetic field structures just inside the ionized front of the clouds are due to the gas compression by UV radiation from nearby massive star. Our investigation into the relation between the magnetic field configuration and the shape of the cloud suggests that the magnetic field configuration affects the evolution of the cloud shape.


2011 ◽  
Vol 487 ◽  
pp. 298-302
Author(s):  
Li Min Shi ◽  
Jiang Niu Yong ◽  
J. Liu ◽  
Er Liang Liu

Added a magnetic field whose direction is parallel to the electrical field’s directions, the charged particles between two electrodes can move in spirals in magnetic-electrochemical compound polishing, and then the condition of chemical reaction is improved. The efficiency and quality of polishing can be promoted consequently. If the direction of magnetic field is changed alternative, the effect of polishing can be improved more clearly. In the paper, a new magnetic-electrochemical compound polishing tool is developed. The tool can be fixed on spindle of CNC easily. The tool is flexible, so it can make the polishing head and workpiece touch evenly each other. Because the head of magnetic-electrochemical compound polishing tool is a series, the head can be replaced conveniently according to different surface. Particularly, the tool can set a magnetic field whose direction is parallel to the electrical field’s direction. The tool can change strength of the magnetic field easily. At last, the tool is tested and its function is perfect.


2016 ◽  
Vol 833 (2) ◽  
pp. 176 ◽  
Author(s):  
Dan P. Clemens ◽  
K. Tassis ◽  
Paul F. Goldsmith

Sign in / Sign up

Export Citation Format

Share Document