scholarly journals PENERAPAN RADIO FREQUENCY IDENTIFICATION DALAM MEMBANGUN SISTEM KEAMANAN DAN MONITORING SMART LOCK DOOR BERBASIS WEBSITE

2020 ◽  
Vol 6 (2) ◽  
pp. 83-90
Author(s):  
Ridho Syukuryansyah ◽  
Didik Setiyadi ◽  
Syahbaniar Rofiah
Keyword(s):  
Radio Frequency Identification ◽  
Early Warning System ◽  
Warning System ◽  
Security Systems ◽  
Magnetic Switch ◽  
Human Needs ◽  
Surrounding Environment ◽  
Is Security ◽  
Frequency Identification ◽  
Safe Condition

Technology in this modernization era helps many workers and human needs. Various fields have been encroached upon by technology and one cannot be released again, one of which is security systems. The need for increased security is based on human needs for a sense of comfort with the assets they have in a safe condition and can be monitored from anytime and anywhere. This research aims to build a security system using RFID and Arduino which can be monitored through the website. An early warning system for unknown objects is also embedded therein using a magnetic switch sensor on the door, buzzer to create sound frequencies that can attract the attention of the surrounding environment and the Arduino camera module to capture images of objects. The results of this research RFID can facilitate access in and out of the door and increase security compared to conventional keys. Only registered / known objects can access the room through the door. In and out activities are monitored through a website that can be accessed anytime and anywhere.

scholarly journals Design of Dual Mode RFID Antenna for Inventory Management and IV Fluid Level Warning System

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Ssu-Han Ting ◽  
Chih-Kuang Wu ◽  
Ching-Hsing Luo
Keyword(s):  
Inventory Management ◽  
Radio Frequency Identification ◽  
Short Distance ◽  
Warning System ◽  
Long Distance ◽  
Pharmaceutical Management ◽  
Transmission Distance ◽  
Rf Devices ◽  
Frequency Identification ◽  
Fluid Levels

Radio frequency identification (RFID) readers are powered RF devices that communicate with an RFID tag to read necessary information. Using this capability, a dual use system for short distance inventory management and moderate distance automatic warning system for low intravenous (IV) fluid levels is designed. The RFID is affixed on the IV drip bag; the fluid in bag affects the antenna transmission distance by fluid dielectric conditions. This allows for two different operational modes (moderate and short distance). For pharmaceutical management, a handheld RFID reader can be used for short distance application. Another stationary RFID system can serve as a warning system for long distance application such as hospital care.

scholarly journals The State of RFID Applications in Libraries

2006 ◽  
Vol 25 (1) ◽  
pp. 24 ◽  
Author(s):  
Jay Sing ◽  
Navjit Brar ◽  
Carmen Fong
Keyword(s):  
Radio Frequency Identification ◽  
Discussion Groups ◽  
State University ◽  
Security Systems ◽  
San Luis ◽  
Repetitive Strain Injuries ◽  
Implementation Costs ◽  
Frequency Identification ◽  
Repetitive Strain ◽  
The Impact

<span>The adoption of Radio Frequency Identification (RFID) technology by libraries promises a solution that could make it possible to inventory hundreds of thousands of items in their collections in days instead of months. In addition, it would allow patrons to check out and return library property automatically at any time of the day. Besides speeding up checkouts, keeping collections in better order, and alleviating repetitive strain injuries among librarians, RFID promises to provide a better control on theft, nonreturns, and misfiling of a library’s assets. With an estimated 35 million library items tagged worldwide in more than three hundred libraries, this technology is generating ever-increasing interest. In October and November 2004, the industrial technology department and the Robert E. Kennedy Library at Cal Poly State University, San Luis Obispo, surveyed participating libraries, RFID electronic discussion groups, and Library and Information Technology Association (LITA-L) electronic discussion group subscribers to collect information with regards to the implementation of RFID systems in libraries. Opinions were gathered regarding such topics, actual or estimated, as RFID implementation costs and time; the impact of the technology on operations such as handling of volumes and security; and RFID system features adopted such as conversion stations, self-checkout units, and security systems. Information on the various RFID library components and the results from the survey are presented in this paper.</span>

scholarly journals PERANCANGAN SISTEM SMARTCARD SEBAGAI PENGAMAN PINTU MENGGUNAKAN RFID BERBASIS ARDUINO

CCIT Journal ◽  
2017 ◽  
Vol 10 (2) ◽  
pp. 239-254
Author(s):  
Ferry Sudarto ◽  
Gustasari Gustasari ◽  
Arwan Arwan
Keyword(s):  
Radio Frequency Identification ◽  
Integrated Circuit ◽  
New Technologies ◽  
New Technology ◽  
Security Systems ◽  
Transmission Frequency ◽  
Rfid Tag ◽  
Rfid Systems ◽  
Frequency Identification ◽  
Circuit Technology

Along with the development of science and technology so rapidly trigger the emergence of new technologies, one of which is RFID. RFID (Radio Frequency Identification) is a process of identifying the object or objects using radio transmission frequency. RFID is a new technology, and will continue to evolve in line with advances in integrated circuit technology, it can be ascertained that the RFID tag can be applied in various fields. RFID systems offer increased efficiency in controlling inventory control in the identification of objects. RFID can be used to store and receive data remotely using a device that RFID TAG (transponder). Many applications can utilize RFID systems, for example for indoor security systems, highways, libraries, class attendance, even as the identity of the student / students. Therefore, in this researchRaharja College presenting a Smartcard System Design using RFID as a device interface and ARDUINO UNO as a controller to be used as a door security system. With the presence of this system is expected to be a useful new innovation in Raharja College and can improve the shortcomings of existing systems and can provide maximum service to the whole personal raharja.

scholarly journals Door Security Design using Radio Frequency Identification With a Short Message Service Warning System

2019 ◽  
Vol 8 (2S2) ◽  
pp. 354-370
Keyword(s):  
Radio Frequency Identification ◽  
Short Message Service ◽  
Warning System ◽  
Short Message ◽  
Security Design ◽  
Security Framework ◽  
Working At Home ◽  
Vital Records ◽  
Message Service ◽  
Frequency Identification

In the workspace, when we are working at home it is vital for property holders to keep up vital records and information. In this manner, the security of the workspace entryway is extremely important to build security and it can avoid burglary when the workspace isn't utilized or relinquished. The easiest security for the entryway is introducing a manual key. Yet, manual key is anything but difficult to break. With advancement of entryway security innovation it utilizes watchword, finger check, and numerous others, yet security is just to open and shutting entryway. Yet, when the entryway was persuasively opened or harmed by hoodlums, the property holder still had no data that the entryway was broken. To conquer this issue, a framework that can supplant the manual entryway bolt to a more advanced entryway security framework is required with the goal that it is difficult to separate and can see whether the entryway is opened or harmed by a cheat. To run this framework, 3 parts are utilized, to be specific RFID card as a key re-arrangement apparatus, a sensor to gauge vibration on the entryway when it is constrained open or harmed by criminals and tells the mortgage holder by means of SMS

scholarly journals Real Time Tracing and Alerting System for Vehicles and Children to Ensure Safety and Security Using Labview

2021 ◽  
Author(s):  
R. Deepalakshmi ◽  
R. Vijayalakshmi ◽  
S. Lavanya ◽  
T.K. Rakshitha Rasmi ◽  
S.B. Sathiya
Keyword(s):  
Radio Wave ◽  
Radio Frequency Identification ◽  
Warning System ◽  
Alerting System ◽  
Frequency Identification ◽  
Student Information ◽  
Information Transfers ◽  
Radio Frequency Identification Devices ◽  
Monitoring Area ◽  
Exact Point

The Absolute time monitoring, detecting and Alerting System for vehicles and children is required to trace and transmit the collected information at regular intervals to ensure safety and security of children. The illustration of the Realtime detecting and warning System consists of two units: Tracing Unit that traces the location information, transfers to the monitoring area, records the data in the database and takes the help of these data to locate the exact point of area of the vehicle with Google/other maps. The second unit is Alerting Unit that tracks the students using active Radio Frequency Identification Devices (RFID)which will be placed on student ID card. radio-wave trans-receiver transmits a common radio wave which is received by the RFID in the ID card. This radio-wave is modified by the RFID’s coil and resent to the receive RFID tags are also used for attendance which is updated directly to the database and displays the other student information.

scholarly journals Sistem Keamanan Ruangan Dengan Perekaman Visual Berbasis Radio Frekuensi Identification Dan Pre Hypertext Processor (PHP) di Loka Monitor Spektrum Frekuensi Radio

2013 ◽  
Vol 2 (2) ◽  
pp. 47
Author(s):  
Yurindra Yurindra ◽  
Agusta Dirga Saputra
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Analytical Methods ◽  
Research Method ◽  
Security Systems ◽  
Database Access ◽  
Lighting Control ◽  
Library Research ◽  
Frequency Identification ◽  
Control Devices

The purpose of the thesis was to produce concrete results in providing security to the agencies that require special security. The method used in the manufacture of home lighting control devices based microcontroller using android smartphone is a prototype. This research method consists of several stages, library research, analytical methods, design methods, and implementation. The results achieved are ketenanagan perceived by the security agencies in masaah increased after he made these security systems. Where this tool uses a layered security system using Radio Frequency Identification (RFID) integrated with any database access. The results of testing this tool ebrhasil well where the user can sign in using RFID card and the user is not registered will be blocked and taken kgambar as evidence.

Humans and Emerging RFID Systems

2011 ◽  
pp. 145-156
Author(s):  
Olli Pitkänen ◽  
Marketta Niemelä
Keyword(s):  
Radio Frequency ◽  
Legal System ◽  
Data Protection ◽  
Radio Frequency Identification ◽  
Rfid Tags ◽  
Research Needs ◽  
Human Needs ◽  
Frequency Identification ◽  
Eu Directives ◽  
Rfid Applications

Radio Frequency Identification (RFID) technology offers a lot of promises. To redeem them, RFID applications have to respect privacy and they need to be supported by the legal system. The article evaluates how the current EU directives on data protection support emerging applications that are based on RFID tags. The evaluation is based on user scenarios that illustrate human needs in relation to technologies and applications. The article continues earlier analyses and uses more realistic and state-of-the-art applications and scenarios. We conclude by pointing out further research needs in the field of RFID and data protection.

Humans and Emerging RFID Systems

2010 ◽  
pp. 1396-1407
Author(s):  
Olli Pitkänen ◽  
Marketta Niemelä
Keyword(s):  
Radio Frequency ◽  
Legal System ◽  
Data Protection ◽  
Radio Frequency Identification ◽  
Rfid Tags ◽  
Research Needs ◽  
Human Needs ◽  
Frequency Identification ◽  
Eu Directives ◽  
Rfid Applications

Radio Frequency Identification (RFID) technology offers a lot of promises. To redeem them, RFID applications have to respect privacy and they need to be supported by the legal system. The article evaluates how the current EU directives on data protection support emerging applications that are based on RFID tags. The evaluation is based on user scenarios that illustrate human needs in relation to technologies and applications. The article continues earlier analyses and uses more realistic and state-of-the-art applications and scenarios. We conclude by pointing out further research needs in the field of RFID and data protection.

scholarly journals Collision Warning System using Rfid in Automotives

2019 ◽  
Vol 8 (11S) ◽  
pp. 153-158
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Warning System ◽  
Ultrasonic Sensor ◽  
Collision Warning ◽  
Identification Methods ◽  
Vehicle Crash ◽  
Frequency Identification ◽  
Similar Path

The proposed work is about vehicle crash evasion framework utilizing an ultrasonic sensor for a vehicle. We utilize the use of electronic frameworks implanted in a car which is required to limit the vehicle mishap fiasco. The RFID (Radio Frequency Identification) methods focus on building up a model of the backside and other significant vehicle crash shirking framework that will recognize the separation between two vehicles moving in a similar path, in a similar bearing and alarm the driver at whatever point the person is in threat range utilizing a microcontroller. The separation is estimated by an ultrasonic sensor used to detect the snag ahead.

scholarly journals Sistem Keamanan Sepeda Motor Menggunakan GPS Dan Radio Frequency Identification (RFID) Berbasis Arduino

2021 ◽  
Vol 19 (2) ◽  
pp. 47-53
Author(s):  
Herwin Simanjuntak ◽  
Rully Pramudita ◽  
Nadya Safitri
Keyword(s):  
Radio Frequency ◽  
Global Positioning System ◽  
Radio Frequency Identification ◽  
Safety System ◽  
Motor Vehicles ◽  
Positioning System ◽  
Security Systems ◽  
Motorcycle Safety ◽  
Global Positioning ◽  
Frequency Identification

Abstract- At this time motorcycle theft cases are still often occur plus the increasing use of motorcycle vehicles, motorcycle theft is caused by the lack of a security system on the ignition which only uses keys and key covers, where security systems like this have been understood mostly motorcycle thieves, the necessity of a motorcycle safety system is needed. To overcome this, a Motorcycle Safety System was made using Arduno-based GPS and Radio Frequency Identification (RFID) to prevent and facilitate the recovery of stolen motor vehicles. The results of this study, the system is made using the Global Positioning System (GPS) as a tool to detect the location of motorcycles, and smart key contacts are added using RFID, SMS gateway and DC-DC Converter.

Sign in / Sign up

Export Citation Format

Share Document