scholarly journals The Influence of Biological Fungicides on the Damage Level of the Sunflower Hybrids By the Pathogenic Microflora

2018 ◽  
pp. 9-16
Author(s):  
V. Karpenko ◽  
O. Korobko
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Dispersion Analysis ◽  
Forest Steppe ◽  
Damage Level ◽  
Leaf Area Duration ◽  
National University ◽  
Cultivation Technology ◽  
The Right ◽  
Selection Of

Nowadays pea and soybeans prevail in agrocoenosis among legume in the Right-bank Forest-steppe. In contrast to these crops, the chickpea is more drought-resistant at the same time, it does not lodge, and the beans do not crack when ripe. In this regard, the problem of developing the elements of chickpea cultivation technology becomes important, in particular, the selection of effective measures to protect crops from weeds using herbicides. It is possible to reduce and overcome herbicide stress when using biological preparation of natural origin – microbial drug and plant growth regulators. The experimental part of research was held during 2015–2017 in the field training and production department and research laboratory of the department of microbiology, biochemistry and plant physiology of Uman National University of Horticulture. Accounting and study of plants height and leaf-area duration in experiments were done in accordance with methodologies, described by Z. M. Hrytsayenko and co-authors. Statistical analysis of the results of the studies was carried out using the methods of dispersion analysis, described by B. A. Dospekhov. As a result of the research it was found: the height and area of the leaves of chickpea plants varied both by years and depending on the use of different norms of the herbicide Panda, entrenched separately and against the background of seeds processing PGR Stympo and MD Ryzobophyt. On the average over the years of observation over the independent action of MD Ryzobophyt (1,0 l/t) the plant height of chickpea with regard to control I grew into 2%, leaf-area duration with regard to control I grew into 12 %. At individual action PGR Stympo (0,025 l/t) with regard to control I grew into 16 %. In variants of cooperative usage of MD Ryzobophyt and PGR Stympo increasing of a chickpea height with regard to controls I contained 8 %, the index of leaf-area duration increased with regard to controls I into 20%. At individual usage of the herbicide Panda in limits 3,0 and 4,0 l/g the plant height grew into 1 and 8 %, the leaf-area duration of chickpea increased into 9 and 32% with regard to control I, at limits 5, and 6, l/g – in 4 and 2% the leaf-area duration of chickpea grew into 19 and 14% with regard to control I. While processing by a mixture of MD Ryzobophyt (1,0 l/t) and PGR Stympo (0,025 l/t) and entering the herbicide Panda in limits 3,0–4,0 l/g before the chickpea sowing the height of a crop surpassed the control I on 12 and 19 % , the leaf-area duration of chickpea increased into 39–83 % with regard to the control I, and at limits of entering 5,0 and 6,0 l/g – into 13 and 11 %. The duration increased into 69 – 33 % to control I. The highest indexes of plants height and leaf-area duration were recorded in the Panda herbicide application in limits of introduction 4,0 l/g against the processing of seeds before the sowing PGR Stympo (0,025 l/t) and MD Ryzobophyt (1,0 l/t) in particular, in this embodiment, the height of the plants increased by 19%, the leaf area - by 83%

scholarly journals Influence of plant density on the growth and productivity of an indeterminate tomato hybrid

2020 ◽  
Author(s):  
V. Sievidov ◽  
◽  
I. Sievidov ◽  
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Plant Density ◽  
The Body ◽  
Forest Steppe ◽  
Left Bank ◽  
Test Plot ◽  
Tomato Plants ◽  
Flowering Phase ◽  
Crop Density

One of the main factors in obtaining consistently high tomato yields is to optimize the plant nutrition area. Determination of the optimal plant density, on the one hand, prevents oppression of plants at increased density. On the other hand, to avoid unnecessary expenses from the irrational use of the cultivated area. Vegetables are one of the main suppliers of biologically active substances necessary for a good human nutrition. They give the body a lot of vitamins, fiber, hemicelluloses, pectin substances, organic acids, various carbohydrates, mineral salts and a number of other biochemical compounds. Tomato is one of the main protected ground crops for Ukraine. Compared to other crops, tomatoes give early and stable yields. The issue of planting density of tomatoes is still not fully resolved, these elements of technology are not adapted to the soil and climatic conditions of the eastern part of the Left-Bank Forest-Steppe of Ukraine. The objective of our research was to determine the optimal crop density of hybrid tomato of indeterminate type in order to obtain the highest yield without reducing the quality of the product. The method of research. The research was carried out during 2018-2019. In film greenhouses, spring-summer crop rotation. The experiments were carried out with an indeterminate tomato hybrid: Tobolsk F1. Producers of seeds of indeterminate hybrids recommend different plant densities for growing conditions in film greenhouses 2.5-3.5 pcs/m2. Therefore, our research was planned to determine the optimal plant density of the indeterminate tomato hybrid Tobolsk F1 for film greenhouses. The total number of plants is 312 pcs. Sowing of seeds was carried out in the third decade of February. The seeds were sown into cassettes, and the seedlings were dived into pots (volume - 500 cm3) on time. Seedlings were grown using bottom irrigation and, at the age of 3-5 true leaves, the seedlings were planted on a test plot in a film greenhouse without heating. Research results. An analysis of phenological observations of plants showed that a change in the density of plants had practically no effect on the timing and rate of passage of the stages of organogenesis in plants, that is, in all variants of the experiment, the phases of development in plants began simultaneously. Indicators of plant parameters indicate that the data obtained both in the phase of mass flowering and mass fruiting of tomatoes differ among themselves. The difference in biometric parameters can be traced depending on the density of plants. Comparing the main biometric indicators, it can be noted that in the flowering phase, the height of plants ranged from 111.0 to 134.9 cm, in the fruiting phase - from 257.0 to 275.8 cm, while the plants differed in height by the density of 4.0 pcs/m2. The vegetative mass of a plant in the flowering phase was from 1884 g with a plant density of 2.5 pcs/m2 to 1144 g with a density of 4.0 pcs/m2. In the phase of flowering fruiting, the weight of the plant ranged from 1704 g to 1574 g, also decreasing with increasing density. In the flowering phase, an increase in the value of the leaf area indicator was observed to 5.8% with an increase in plant density, and in the fruiting phase, a slight decrease in the indicator to -1.8% was observed with an increase in plant density. So, according to biometric indicators, plants develop better with a density of 3.5 pcs/m2: tomato plants have the best indicators of vegetative mass and plant height, the leaf surface area varies within insignificant limits. The size of the fruits and the yield of standard tomato production are in direct proportion to the density of plants, that is, the more of them per unit area, the lower these indicators. In general, the increase in the density of tomato plants significantly affected the yield. Conclusions. Two-year researches have established that with an increase in plant density, in terms of leaf area in tomato plants of the Tobolsk F1 hybrid, on average, there was a slight fluctuation in the indicator at the level of 0.9-1.1%. The indicator of the vegetative mass of the plant ranged from -4.1 to +1.8% as compared to the control, also decreasing with increasing density. The indicator of plant height both in the flowering phase and in the fruiting phase, on the contrary, grew with an increase in plant density and ranged from -4.0 to + 7.1% compared to the control, while the plants differed in height by a density of 4.0 pcs/m2. In general, the studies carried out give grounds to conclude that in a spring film greenhouse, according to biometric indicators, on average, plants develop better with a density of 3.5 pcs/m2: tomato plants have the best ratio of vegetative mass, plant height and leaf area. The maximum yield of tomato hybrid Tobolsk F1 at the level of 15.8 kg/m2 in the eastern part of the Left-Bank Forest-Steppe of Ukraine was obtained with a plant density of 3.5 pcs/m2.

Historical aspects, morphological-biological and agro-technological features of cultivation of tulip varieties (Tulipa (L.) for the purpose of further use in gardening

2020 ◽  
Vol 1 (97) ◽  
pp. 102-111
Author(s):  
V.V. Polishchuk ◽  
◽  
L.V. Kalyuzhna
Keyword(s):  
Large Fraction ◽  
Early Spring ◽  
Forest Steppe ◽  
River Sand ◽  
Introduced Plants ◽  
Experimental Area ◽  
Small Depth ◽  
Loose Soil ◽  
National University ◽  
The Right

The evaluation of 50 introduced tulip genotypes (Tulipa (L.) in the conditions of the Right-Bank Forest-Steppe of Ukraine were made by the Department of Horticulture of Uman National University of Horticulture into groups, classes, where different varieties, mainly of foreign selection were represented according to their decorative qualities, basic economic and biological features and grouped into a collection. The indicators concerning the phonological phases of development of introduced plants in the context of individual varieties of tulips and on average by years of research carried out and generalized. A brief agrobiological and decorative characteristics of collection varieties in the conditions of the Right-Bank Forest-Steppe of Ukraine, which are included in further research on the cultivation and reproduction of promising varieties is given/ Bulbs of all introduced varieties were planted in late September, namely on the 25th-27th, so that they would be fully rooted. before the first frosts, It should be noted that first of all, small fractions of bulbs were planted, sticking them into the loose soil at the bottom of the furrow made only with a distance of 6–8 cm from each other. However, we also took into account the factor that small bulbs were planted somewhat denser at depth, which is usually three times the height of the bulb. The plant survival stage was completed within 2–3 weeks. For processing we have chosen a site in the botanical nursery of the Department of Horticulture, where there are no stagnant floods and rainwater. During its preparation, a large fraction of river sand was applied for better moisture throughput, and with a small excess it can be easily removed. Later, when the soil actually freezes to a small depth, namely 1–3 cm, the experimental area was mulched with 3–5 cm sawdust and in the spring the mulch was raked. The experimental area was completely protected from cold winds, which in turn didn’t shorten the flowering period and didn’t actually weaken the plants. Field observations on the resistance of different varieties of tulips to gray rot in the Forest-Steppe of Ukraine were carried out and it was found that the infection of the studied genotypes was at a low and very low level, despite the contrasting conditions of different years of study. In early spring seedlings were sprayed with fungicides to prevent gray rot.

scholarly journals Productivity of camelina and spring rapeseed as affected by varietal characteristics in the Right-Bank Forest-Steppe of Ukraine

2021 ◽  
Author(s):  
L. V. Kononenko
Keyword(s):  
Oil Content ◽  
Glucosinolate Content ◽  
Forest Steppe ◽  
Industrial Complex ◽  
Oilseed Crops ◽  
National University ◽  
Growing Conditions ◽  
The Right

Purpose. Determine the oil content and glucosinolate content and productivity of spring camelina and spring rapeseed as affected by varietal characteristics. Methods. The research was conducted in the educational-scientific-industrial complex of Uman National University of Horticulture. Spring rapeseed varieties ‘Belinda’, ‘Aidar’, ‘Heros’, ‘Jerry’ and spring camelina varieties ‘Zevs’, ‘Hirskyi’, ‘Slavutych’, ‘Mirazh’ were studied. Seeds were sown in a row to a depth of 1.5 cm with a seeder CH-16. The sowing rate was 300 seeds/m2, or 5.4 kg/ha. The crop was harvested separately by Sampo-500 combine. Results. In spring rapeseed, the highest yield was marked by variety ‘Aidar’ (2.52 t/ha) and the lowest by ‘Heros’ (2.43 t/ha). In spring camelina, the highest yield was in variety ‘Zevs’ (2.31 t/ha) and lower in ‘Hirska’ (2.15), ‘Mirazh’ (2.27), and ‘Slavutych’ (2.22 t/ha). The highest oil content among rapeseed varieties demonstrated ‘Aidar’ (43.7%). Slightly lower it was in ‘Belinda’ (43.2%), ‘Jerry’ (42.8) and ‘Heros’ (42.6%). Depending on the varietal characteristics, the highest percentage of oil content was found in spring camelina varieties ‘Zevs’ (45.1%). It was lower by 0.5 and 0.9% in ‘Mirazh’ and ‘Slavutych’. The lowest percentage of oil content (43.7%) was determined in camelina variety ‘Hirska. In spring rapeseed varieties, the highest content of glucosinolates was in ‘Aidar’ – 20.5 μmol/g, 0.3 and 0.5 μmol/g less in ‘Belinda’ and ‘Jerry’, and the lowest in ‘Heros’ (19.8 μmol/g). In spring camelina, the highest value was in the variety ‘Zevs’ (22.0 μmol/g), and the lowest in ‘Hirska’ (21.0 μmol/g). ‘Mirazh’ and ‘Slavutych’ contained 21.7 and 21.4 μmol/g of glucosinolatesm respectively. Conclusions. The productivity of oilseed crops varies under the same growing conditions: spring rapeseed, regardless of varietal characteristics, demonstrated higher yield compared to camelina. On average over the years of research and varieties, this indicator was 2.47 t in spring rapeseed, and 2.24 t/ha in spring camelina, which is 0.23 t/ha less. In rapeseed, the oil content of the seeds was 43.07%, the content of glucosinolates varied from 19.8 to 20.5 μmol/g. In spring camelina, the oil content of seeds was 1.33–44.40% higher, the content of glucosinolates ranged from 21.0 to 22.0 μmol/g. The level of profitability of the studied oilseed crops was high and varied as affected by varietal characteristics: in rapeseed from 122 to 141%, and in spring camelina from 182 to 196%.

scholarly journals Energy productivity of grain sorghum depending on the elements of cultivation technology in the Right-Bank Forest-Steppe of Ukraine

2021 ◽  
pp. 122-130
Author(s):  
L. Pravdyva
Keyword(s):  
Grain Sorghum ◽  
Forest Steppe ◽  
Energy Yield ◽  
Research Station ◽  
National Academy Of Sciences ◽  
Energy Productivity ◽  
Sowing Time ◽  
Solid Biofuel ◽  
Cultivation Technology ◽  
The Right

In Ukraine, grain sorghum is an important grain crop used in bioethanol and solid fuel production. It stands out signifcantly from other grain crops by its economically valuable features, drought resistance, high productivity and universality of use. Grain sorghum is grown for use in the food industry (the main processed products are sorghum starch, glucosefructose syrups, alcohol, etc.), in fodder production and, more recently, in the energy industry. Therefore, the research of the elements of the cultivation technology, namely the sowing time and the depth of planting of grain sorghum seeds, is expedient and perspective. The article highlights the research results of the influence of the sowing time and the depth of planting seeds on the energy productivity of sorghum crops of the grain varieties ‘Dniprovskyi 39’ and ‘Vinets’ in the Right-Bank ForestSteppe of Ukraine. The purpose of the research is to establish the optimal sowing time and the depth of planting of grain sorghum seeds and to substantiate their influence on the crop energy productivity in condition of the Right-Bank Forest-Steppe of Ukraine. The research was conducted during 2016–2020 at the Bilotserkivska Research Station of the Institute of Bioenergy Crops and Sugar Beet of the National Academy of Sciences of Ukraine. It was found that the highest crop yield was obtained by sowing grain sorghum seeds in the 1st decade of May at a planting depth of 4–6 cm. At the same time, the grain yield of the ‘Dniprovskyi 39’ variety was 7.1–7.4 t/ha, of the ‘Vinets’ variety – 6.3–6.7 t/ha; the yield of biomass of the ‘Dniprovskyi 39’ variety was 40.2–44.4 t/ha, of the ‘Vinets’ variety – 37.3–39.5 t/ha. The highest bioethanol yield was obtained by sowing grain sorghum seeds in the 1st decade of May at a depth of planting of seeds of 4–6 cm. Cultivation of the ‘Dniprovskyi 39’ variety allowed to obtain 2.37–2.47 t/ha of bioethanol, the ‘Vinets’ variety – 2.08–2,21 t/ha. The yield of solid biofuel in this variant of the experiment was also the largest and amounted to 9.29–10.26 t/ha for the ‘Dniprovskyi 39’ variety and 8.62–9.12 t/ha for the ‘Vinets’ variety. The total energy yield from the obtained biofuel of the ‘Dniprovskyi 39’ variety was 210.66–228.98 GJ/ha, of the ‘Vinets’ variety – 192.37–203.95 GJ/ha. Key words: grain sorghum, varieties, sowing time, seeding depth, energy productivity.

scholarly journals Peculiarities of growth and development and productivity of Savoy cabbage varieties (Brassica sabauda Lizg.) in the conditions of the Right-Bank Forest-Steppe of Ukraine

2021 ◽  
Author(s):  
Z. I. Kovtuniuk ◽  
H. Ya. Slobodianyk ◽  
H. V. Ninova ◽  
O. Yu. Polovynchuk
Keyword(s):  
Growth And Development ◽  
Forest Steppe ◽  
Row Spacing ◽  
Production Department ◽  
Head Formation ◽  
National University ◽  
Control Variant ◽  
The Right ◽  
Intensive Growth

Purpose. To establish the peculiarities of growth and development and formation of productivity of Savoy cabbage varieties (Brassica sabauda Lizg.) in the conditions of the Right-Bank Forest-Steppe of Ukraine. Methods. The research was conducted in the Research and Production Department of Uman National University of Horticulture in the years 2018–2020. Varieties of savoy cabbage (‘Vertu 1340’ – control, ‘Sphere’, ‘Rozali’ and ‘Vertus’) were planted according to the scheme 70 × 40 cm (35.7 thousand plants/ha). Results. During the sowing of seeds (April 25) on cold ridges in a row method with a row spacing of 10 cm, mass shoots of Savoy cabbage were observed on average in early May (7–8 days), the beginning of head formation – in the middle of August, and their technical maturity in late September. Intensive growth of heads took place in the middle and late August and ended in late September. On average, over the years of research, the largest diameter of the head was observed in the cultivars ‘Vertu 1340’ – 18.7 cm, the smallest in the ‘Rosalie’ – 16.1 cm. at one level – 17.5 and 17.6 cm, respectively. The smallest in height at the level of the rosette and head were plants of the ‘Sphere’ and ‘Vertus’ varieties – 25.4 and 23.4 cm and 26.9 and 24.6 cm, respectively. The control variety ‘Vertu 1340’ was characterized by the highest indicators of height of both the rosette (40.7 cm) and the actual head (36.5 cm). Slightly lower rates were observed in the variety ‘Rosalie’ – 32.9 and 31.8 cm, respectively. The highest yields were formed by Savoy cabbage varieties ‘Vertus’ (53.1 t/ha) and ‘Sphere’ (51.8 t/ha), which exceeded the control variant by 7.4 and 6.1 t/ha, respectively (‘Vertu 1340’ – 45.7 t/ha). The least productive among the studied assortment was ‘Rosalie’ yielding 39.9 t/ha. Conclusions. When grown in the Forest-Steppe of Ukraine, the highest yields of marketable products are formed by Savoy cabbage varieties ‘Sphere’ and ‘Vertus’.

scholarly journals White rot of sunflower

2019 ◽  
pp. 25-28
Author(s):  
S. Retman ◽  
N. Bazykina
Keyword(s):  
Weather Conditions ◽  
Steppe Zone ◽  
White Rot ◽  
Forest Steppe ◽  
Disease Development ◽  
Beginning Of Flowering ◽  
Favorable Weather ◽  
June July ◽  
The Right ◽  
Selection Of

Goal. To study the spread and development of white rot on sunflower in the Right bank of Forest-Steppe of Ukraine. Methods. The research was conducted during 2014—2018 in the forest-steppe zone of Ukraine (Kyiv and Khmelnytsky region). The selection of plant samples was carried out with further analysis in laboratory conditions The observations were conducted according to generally accepted methods; spread and severity of diseases were determined. Results. During the years of investigation, the root, stem and head types of the disease have been identified. There were significant differences in both the symptoms and the degree of disease development in different years. During the vegetative periods of 2014, 2015, and 2017 disease development was compiled — 2—5%. Symptoms of the disease were detected on the stems of plants and heads, starting with the phase of seed development — milk ripeness. The weather conditions of 2016 and 2018 (GTK in June-July 1.2—1.9) were favorable for white rot infection. The disease appeared from the phase of “star” in 2016 and at the beginning of flowering in 2018. The development of the disease was significantly higher compared to other years and reached 12.0—15.1% in 2016 with the spread of 61.2—75.0%. In 2018 its severity in Khmelnitsky region was 11.2% while spread reached 78.6%. Firstly, the root and stem, and later the head form of the disease were marked. In addition to the typical symptoms, spots with brown concentric circles were found on the basal part of the stem. At the same time, the tissue almost did not collapse, and small sclerotic could be detected only in its lower part. Conclusions. Under favorable weather conditions, white rot of sunflower is becoming widespread and may be epiphytotic. In the conditions of the Right bank of Forest-Steppe Ukraine, the disease occurs at different stages of organogenesis. Symptoms of three forms of infection were observed. To improve the phytosanitary condition of crops, it is necessary to optimize the saturation of crop rotation with sunflower and other technical crops, which are also one of the host plants of the pathogen, and to follow of all elements of the protection system.

Analysis of the parameters of economically valuable traits of camelina sativa for the conditions of the Right-Bank Forest-Steppe of Ukraine under the conditions of climate change

2021 ◽  
Vol 1 (98) ◽  
pp. 199-210
Author(s):  
A. I. Lyubchenko ◽  
◽  
I. O. Lyubchenko ◽  
L. O. Ryabovol ◽  
Ya. S. Ryabovol
Keyword(s):  
Climate Change ◽  
Regression Analysis ◽  
Plant Height ◽  
Growing Season ◽  
Camelina Sativa ◽  
Forest Steppe ◽  
Plant Safety ◽  
The Right ◽  
Number Of Seeds ◽  
Number Of Branches

In the article, on the basis of regression analysis of the data, a forecast of the most important elements of the structure of productivity for the maximum specified yield of camelina sativa in the conditions of the Right-Bank Forest-Steppe of Ukraine in conditions of climate change is made. According to the assessment of the correlation relationships between the economically valuable breeding traits of camelina sativa, the studied indicators differ among themselves in terms of the level of interaction. The indicators of seed collection from one plant (r=0.98), the number of pods per plant (r=0.84) and plant safety (r=0.71) have a significant influence on the formation of productivity. The average correlation effect on productivity is the number of seeds per pod (r=0.44), the number of branches per plant (r=0.60), plant height (r=0.37) and the duration of the growing season (r=0.38). The mass of seeds per plant strongly depended on the number of pods per plant (r=0.85), but had an average positive correlation with the number of seeds per pod (r=0.48), the number of branches per plant (r=0.59), plant height (r=0.37), plant safety (r=0.62) and duration of the growing season (r=0.37). There is a weak negative relationship between the number of seeds in a pod and plant height (r=-0.29) and the duration of the growing season (r=-0.18), between the mass of a thousand seeds and the number of pods per plant (r=-0.08). Regression analysis of the entire array of experimental data made it possible to predict the value of the most important elements of the productivity structure for the maximum specified yield. For a maximum yield of 3.0–3.5 t/ha, the weight of seeds per plant should be 2.1–2.4 g, while the plant should form 13.4–15.9 branches, 159.5–182.1 pods and 16.8–19.5 seeds per pod. The mass of a thousand seeds should have 2.34–2.95 g, plant height 90.7–105.8 cm and plant safety at the level of 98.9 %, and the duration of the growing season should be in the range from 103 to 110 days.

scholarly journals PRODUCTIVITY OF WINTER WHEAT IN CROP ROTATION LINKS ON LEACHED BLACK SOIL

2020 ◽  
Author(s):  
С.В. Богомазов ◽  
А.В. Лянденбурская ◽  
А.А. Левин ◽  
О.А. Ткачук ◽  
Е.В. Ефремова
Keyword(s):  
Winter Wheat ◽  
Leaf Area ◽  
Green Manure ◽  
Steppe Zone ◽  
Black Soil ◽  
Forest Steppe ◽  
Middle Volga Region ◽  
Wheat Cultivation ◽  
Cultivation Technology ◽  
Middle Volga

Целью исследований являлось совершенствование элементов технологии возделывания озимой пшеницы в лесостепи Среднего Поволжья, позволяющих оптимизировать условия роста и развития. Исследованиями установлено, что вид пара не оказывал существенного влияния на плотность почвы. После сидерального пара запасы продуктивной влаги метрового слоя перед посевом снижались, в среднем, на 6,4 мм. Размещение озимой пшеницы после сидерального пара приводило к несущественному уменьшению площади листьев на 0,14 тыс. м2/га, по сравнению с черным паром. Наибольший вклад в формирование продуктивности озимой пшеницы оказало удобрение Гумостим, которое способствовало увеличению площади листовой поверхности на 5,1 тыс. м2/га, урожайности на 0,46 т/га по отношению к контролю. The aim of the research was to improve the elements of winter wheat cultivation technology in the forest-steppe zone of the Middle Volga region, which allow to optimize the conditions for growth and development. The studies found that the type of fallow did not significantly affect the density of the soil. After green-manured fallow, the reserves of productive moisture in the meter layer decreased before sowing, on average, by 6.4 mm. Winter wheat placing after green manure fallow led to an insignificant decrease in leaf area by 0.14 thousand m2/ha, compared to black fallow. The greatest contribution to the formation of the productivity of winter wheat was made by the fertilizer Gumostim, which contributed to an increase in the leaf area by 5.1 thousand m2/ha, in yield - by 0.46 t/ha in relation to the control.

Sign in / Sign up

Export Citation Format

Share Document