scholarly journals Obtaining and studying the properties of cobalt- and nickel-containing nanocomposites by thermolysis, using saturated carboxylates as precedors

2021 ◽  
Vol 12 (2-2021) ◽  
pp. 207-213
Author(s):  
R. V. Saprykin ◽  
◽  
S. A. Semenov ◽  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Ir Spectroscopy ◽  
Elemental Analysis ◽  
Scanning Calorimetry ◽  
Monocarboxylic Acids ◽  
X Ray ◽  
Transmission Electron ◽  
Cobalt And Nickel

Nickel (II) and cobalt (II) salts were synthesized with saturated monocarboxylic acids: butyric, valeric, nylon,enanthic, and caprylic. The obtained compounds were characterized by elemental analysis, IR spectroscopy,and differential scanning calorimetry. As a result of thermolysis of the synthesized carboxylates, nanocomposites were obtained, which were studied by scanning and transmission electron microscopy, elemental analysis, IR spectroscopy, energy dispersive X-ray spectroscopy, and X-ray phase analysis. The magnetic properties of the obtained nanocomposites have been studied.

Crystallization of Amorphous Si In Al/Si Multilayers

1991 ◽  
Vol 230 ◽  
Author(s):  
Toyohiko J. Konno ◽  
Robert Sinclair
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Layered Structure ◽  
Heat Of Reaction ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Electron ◽  
Amorphous Si

AbstractThe crystallization of amorphous Si in a Al/Si multilayer (with a modulation length of about 120Å) was investigated using transmission electron microscopy, differential scanning calorimetry and X-ray diffraction. Amorphous Si was found to crystallize at about 175 °C with the heat of reaction of 11±2(kJ/mol). Al grains grow prior to the nucleation of crystalline Si. The crystalline Si was found to nucleate within the grown Al layers. The incipient crystalline Si initially grows within the Al layer and then spreads through the amorphous Si and other Al layers. Because of extensive intermixing, the original layered structure is destroyed. The Al(111) texture is also enhanced.

Low-temperature instability of Ti2SnC: A combined transmission electron microscopy, differential scanning calorimetry, and x-ray diffraction investigations

2009 ◽  
Vol 24 (1) ◽  
pp. 39-49 ◽  
Author(s):  
J. Zhang ◽  
B. Liu ◽  
J.Y. Wang ◽  
Y.C. Zhou
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Low Temperature ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Temperature Instability ◽  
X Ray ◽  
Transmission Electron ◽  
Ceramic Microstructure

Transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and x-ray diffraction (XRD) investigations were conducted on the hot-pressed Ti2SnC bulk ceramic. Microstructure features of bulk Ti2SnC ceramic were characterized by using TEM, and a needle-shaped β-Sn precipitation was observed inside Ti2SnC grains with the orientation relationship: (0001) Ti2SnC // (200) Sn and Ti2SnC // [001] Sn. With the combination of DSC and XRD analyses, the precipitation of metallic Sn was demonstrated to be a thermal stress-induced process during the cooling procedure. The reheating temperature, even as low as 400 °C, could trigger the precipitation of Sn from Ti2SnC, which indicated the low-temperature instability of Ti2SnC. A substoichiometry Ti2SnxC formed after depletion of Sn from ternary Ti2SnC phase. Under electron beam irradiation, metallic Sn was observed diffusing back into Ti2SnxC. Furthermore, a new Ti7SnC6 phase with the lattice constants of a = 0.32 and c = 4.1 nm was identified and added in the Ti-Sn-C ternary system.

Synthesis of VO2(A) Nanostructures by a Hydrothermal Method and their Transition to VO2(M)

2011 ◽  
Vol 295-297 ◽  
pp. 368-372 ◽  
Author(s):  
Ya Lan Zhong ◽  
Yi Fu Zhang ◽  
Xin Liu ◽  
Xing Hai Liu ◽  
Chi Huang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Phase Transition ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Hydrothermal Method ◽  
Scanning Calorimetry ◽  
Facile Hydrothermal Method ◽  
X Ray ◽  
Transmission Electron ◽  
First Time

VO2(A) nanobelts have been synthesized using V2O5, H2O2, ethanol, H2O as the starting materials through a facile hydrothermal method. The as-obtained products were characterized by X-ray powder diffraction (XRD), X-ray photoelecton spectroscopy (XPS), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). Some parameters, such as, the reaction time, reaction temperature and the ratio of EtOH/H2O, have greatly influenced on the phases and morphologies of the final products. It was found that VO2(A) can be converted to VO2(M) at 700 °C for 2 h for the first time. Furthermore, the phase transition properties of VO2(A) and VO2(M) phases were respectively studied.

Hydrodeoxygenation of stearic acid for the production of “green” diesel

2014 ◽  
Vol 3 (6) ◽  
Author(s):  
Antonina A. Stepacheva ◽  
Linda Zh. Nikoshvili ◽  
Esther M. Sulman ◽  
Valentina G. Matveeva
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Photoelectron Spectroscopy ◽  
Hypercrosslinked Polystyrene ◽  
Biodiesel Production ◽  
Scanning Calorimetry ◽  
Green Diesel ◽  
X Ray ◽  
Transmission Electron

AbstractThe current work is devoted to the second-generation biodiesel production via fatty acids catalytic hydrodeoxygenation (HDO). Pd-containing catalysts based on polymeric matrix of hypercrosslinked polystyrene (HPS) with different metal loading were investigated in the process. The catalysts were characterized by low-temperature nitrogen physisorption, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The selectivity of the process (regarding to

Reactions in Metal-Metalloid Multilayers

1993 ◽  
Vol 311 ◽  
Author(s):  
Robert Sinclair ◽  
Toyohiko J. Konno
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Reactive Systems ◽  
Nucleation And Growth ◽  
In Situ Observation ◽  
Scanning Calorimetry ◽  
Compound Formation ◽  
Transmission Electron

ABSTRACTWe have studied the reactions at metal-metalloid interfaces using high resolution transmission electron microscopy, including in situ observation, and differential scanning calorimetry. There is contrasting behavior depending on the affinity for interaction or segregation. For reactive systems, compound formation ultimately results, but this can be preceded by solidstate amorphization. For non-reactive systems, crystallization of the metalloid is often achieved with nucleation and growth mediated by the metal phase.

Preparation and Property of Al87Ce3Ni8.5Mn1.5 Nanophase Amorphous Composites

2011 ◽  
Vol 412 ◽  
pp. 263-266
Author(s):  
Hong Wei Zhang ◽  
Li Li Zhang ◽  
Feng Rui Zhai ◽  
Jia Jin Tian ◽  
Can Bang Zhang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Phase ◽  
Volume Fraction ◽  
Material Structure ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Electron ◽  
Different Temperatures

The higher mechanical strength of Al87Ce3Ni8.5Mn1.5 nanophase amorphous composites has been obtained with two methods. The first nanophase amorphous composites are directly produced by the single roller spin quenching technology. The method taken for the second nanophase amorphous composites is at first to obtain amorphous single-phase alloy, followed by annealed at different temperatures .The formative condition, the microstructure, the particle size, the volume fraction of α-Al phase and microhardness of nanophase amorphous composites etc have been investigated and compared by X-ray diffraction (XRD) and transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The microstructure of composites produced by the second method is higher than the former, the fabricated material structure of the system is more uniform and the process is easier to control.

Synthesis of Fe 3+-Dopped PANI Conductive Nanomaterials via Interfacial Polymerization

2011 ◽  
Vol 239-242 ◽  
pp. 2839-2842
Author(s):  
Hong Mei Mu ◽  
Peng Fei ◽  
Bi Tao Su ◽  
Zi Qiang Lei
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fourier Transform ◽  
Ir Spectroscopy ◽  
Interfacial Polymerization ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Conductive Nanomaterials ◽  
Ft Ir Spectroscopy

A series of Fe3+-dopped polyaniline (Fe3+/PANI) nanomaterials with different morphologies and a higher conductivity were successfully synthesized using a simple and static interfacial polymerization by using FeCl3 as both oxidant catalyst and dopant. The effect of surfactants CTAB and SDS and the concentration of FeCl3 on the morphology and conductivity of Fe3+/PANI nanomaterial were investigated. The samples were characterized by Transmission Electron Microscopy (TEM), SDY-4 probes conductivity meter, X-ray Diffractometry (XRD), Energy dispersive spectroscopy (EDS) and Fourier transform infrared (FT-IR) spectroscopy techniques. TEM’s results showed that their morphologies changed with the type of the surfactant and the concentration of FeCl3. Introducing surfactants CTAB and SDS into Fe3+/PANI remarkably improved the conductivity of the material. The conductivities of CTAB/Fe3+/PANI and SDS /Fe3+/PANI nanomaterials were respectively about 4.8×10-2 and 1.3×10-2 S/cm while the conductivity of Fe3+/PANI was found to be 1.5×10-4 S/cm. The different morphology and high conductivity may be ascribed to the mutual effects of the surfactant and oxidant.

Sign in / Sign up

Export Citation Format

Share Document