Modern materials for energy saving heat-insulating constructions of pipe-lines and heat exchange equipment

2020 ◽  
pp. 46-50
Author(s):  
G.I. Petrov ◽  
◽  
N.S. Nikolaev ◽  
V.N. Kornienko ◽  
◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Meat Products ◽  
Meat Industry ◽  
Technological Equipment ◽  
Coating Materials ◽  
Heat Exchange Equipment ◽  
Quality Stability ◽  
And Performance ◽  
Pipe Lines

Improvement of heat-insulating constructions is directly linked with the development of modern technological equipment due to an increase in its energy efficiency and energy saving during thermal treatment of meat and meat products. Thermotechnical characteristics and performance properties of protective coating materials of the trademark RU-FLEX intended for heat-insulating constructions of pipe-lines and equipment of meat industry enterprises were analyzed. Peculiarities of installation of thermal insulation RU-FLEX from foam rubber using different auxiliary materials to improve installation quality, stability to negative environmental effects and increase the service life were examined.

Preparation and Performance of Thermal Insulation Energy Saving Coating Materials for Exterior Wall

2014 ◽  
Vol 14 (5) ◽  
pp. 3861-3867 ◽  
Author(s):  
Fei Wang ◽  
Jinsheng Liang ◽  
Qingguo Tang ◽  
Cong Chen ◽  
Yalei Chen
Keyword(s):  
Energy Saving ◽  
Thermal Insulation ◽  
Exterior Wall ◽  
Coating Materials ◽  
And Performance

scholarly journals Towards an Autonomous Framework for HPC Optimization: Using Machine Learning for Energy and Performance Modeling

2019 ◽  
Author(s):  
Vinícius Klôh ◽  
Matheus Gritz ◽  
Bruno Schulze ◽  
Mariza Ferro
Keyword(s):  
Machine Learning ◽  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Saving ◽  
High Performance ◽  
Performance Modeling ◽  
Application Performance ◽  
Ongoing Research ◽  
And Performance

Performance and energy efficiency are now critical concerns in high performance scientific computing. It is expected that requirements of the scientific problem should guide the orchestration of different techniques of energy saving, in order to improve the balance between energy consumption and application performance. To enable this balance, we propose the development of an autonomous framework to make this orchestration and present the ongoing research to this development, more specifically, focusing in the characterization of the scientific applications and the performance modeling tasks using Machine Learning.

Additional methods to improve the energy efficiency of oil pipeline transportation

2020 ◽  
Vol 10 (5) ◽  
pp. 558-565
Author(s):  
Marat R. Lukmanov ◽  
◽  
Sergey L. Semin ◽  
Pavel V. Fedorov ◽  
◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Pipeline System ◽  
Energy Costs ◽  
Improvement Program ◽  
Oil Pipeline ◽  
Energy Efficiency Improvement ◽  
Oil Transportation ◽  
Pumping Equipment ◽  
Preparatory Work

The challenges of increasing the energy efficiency of the economy as a whole and of certain production sectors in particular are a priority both in our country and abroad. As part of the energy policy of the Russian Federation to reduce the specific energy intensity of enterprises in the oil transportation system, Transneft PJSC developed and implements the energy saving and energy efficiency improvement Program. The application of energy-saving technologies allowed the company to significantly reduce operating costs and emissions of harmful substances. At the same time, further reduction of energy costs is complicated for objective reasons. The objective of this article is to present additional methods to improve the energy efficiency of oil transportation by the example of the organizational structure of Transneft. Possibilities to reduce energy costs in the organization of the operating services, planning and execution of work to eliminate defects and preparatory work for the scheduled shutdown of the pipeline, the use of pumping equipment, including pumps with variable speed drive, the use of various pipelines layouts, changing the volume of oil entering the pipeline system and increase its viscosity.

IMPROVEMENT OF ENERGY SAVING AND ENERGY EFFICIENCY IN BUILDINGS AND RESIDENTIAL HOUSES IN THE KYRGYZ REPUBLIC

2019 ◽  
pp. 3-17
Author(s):  
Turatbek Kasymov
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Energy System ◽  
Environmental Indicators ◽  
Kyrgyz Republic ◽  
Technical Standards ◽  
Insulating Materials ◽  
Increase Energy Efficiency ◽  
State Construction ◽  
The Government

This article reviews energy consumption in the Kyrgyz Republic economy, environmental indicators and strategies to further develop the national fuel and energy system to ensure energy efficiency and energy saving. An existing situation in energy efficiency of buildings in the country is described. Secondary legislation and by-laws approved by the Government of the Kyrgyz Republic as well as several technical standards, norms, methods and guidelines approved by the order of the State Construction Agency of the Kyrgyz Republic are presented. Applying modern insulating materials are suggested as possible solutions to increase energy efficiency and energy saving. The advantages of EPS-beton in comparison with other thermal insulation materials are discussed and foreign experience of use of EPS-beton products in increasing energy efficiency of buildings is presented.

Problem of energy efficiency in the model of sustainable development in Ukraine: EU experience

2019 ◽  
pp. 18-23
Author(s):  
Vasyl Zelenko ◽  
Yaryna Ferenchak ◽  
Nataliya Zelenko
Keyword(s):  
Energy Efficiency ◽  
Sustainable Development ◽  
Energy Saving ◽  
Association Agreement ◽  
Climate Conditions ◽  
The Sustainable Development ◽  
Non Profit ◽  
Efficiency Measures ◽  
Efficient Construction

The paper outlines major preconditions of development of energy efficiency programs and the process of their introduction from the perspective of sustainable development concept. Energy saving measures of European Union are examined, its experience and results, like green books and Thermie programs, etc are analyzed. The paper also specifies relevant activities and responsibilities undertaken by Member States by 2030 and the rates planned to be achieved. The experience of neighboring Poland in energy efficiency promotion is analyzed, as far as the country most closely resembles Ukraine by the initial rates in 1990. We calculated conditional losses of Ukraine in 2017 as the gap between the rates of energy efficiency of Ukraine and Poland (similarity of climate conditions and the state of housing funds allowed us to assume that the comparison will be the most correct regarding Ukraine). The results of calculations make us conclude that the funds are used most efficiently if the money designated, for example, for subsidizing of population are directed at strengthening of energy efficiency (at least up to the level of neighboring country). It will result in saving of about 40 billion. This is the amount defined as Ukrainian capacity in terms of improvement of energy saving and possible results of its realization. The paper determines the stage Ukraine is at in introduction of energy efficiency measures and programs: “warm loans” program; conditions regarding energy saving in Ukraine enshrined in the EU-Ukraine Association Agreement; creation of legal basis, namely the Law of Ukraine “On Energy Efficiency Fund” as of 8 June 2017. The role of newly created Energy Efficiency Fund is analyzed. Special attention is paid to the fact that energy efficient construction is one of international liabilities undertaken by Ukraine. The presence of The Active House Alliance at Ukrainian market is an important achievement in this sphere as it is the non-profit association aiming at creation of housing concept corresponding to the sustainable development principles.

Ukraine’s foreign trade in meat and meat products: trends and geographical aspects

2020 ◽  
pp. 48-52
Author(s):  
Olena Lyakhovska
Keyword(s):  
Small Businesses ◽  
Structural Changes ◽  
Raw Materials ◽  
Meat Products ◽  
World Market ◽  
Poultry Meat ◽  
Positive Development ◽  
Meat Production ◽  
Meat Industry ◽  
Geographical Structure

Current trends in meat and meat products exports are considered. The dynamics and structural changes in meat exports by types and degree of processing (beef and veal, pork, poultry, finished meat products) are analyzed. The paper proves that in recent years, only meat and edible poultry by-products have taken a competitive position in the world market. Accordingly, the dynamics of exports of this type of meat is positive, and the share of these products in the structure of exported meat is the largest (86.09%). Possible threats to the growth of import dependence on certain types of meat products, in particular, chilled and frozen beef and veal, pork, are indicated. The rating of the largest countries-importers of meat and meat products (by types) from Ukraine is built, their share in the structure of meat exports is determined. Changes in the geographical structure of exports have been studied, which indicate a low level of diversification of the geography of exports of certain types of meat (pork, beef). At the same time, a positive development of the geographical structure of poultry meat exports (exported to more than 100 countries) was revealed. Problems of the export potential development in the meat industry of Ukraine are revealed. In particular, the problems of livestock development (outdated technologies and production techniques that reduce the efficiency and productivity; inefficiency of the organization of purchase and processing of meat, which leads to reduced breeding in small businesses and households; inefficiency of state incentives, etc.) and industrial meat production (lack of raw materials, obsolescence of fixed assets and production technologies, poorly developed logistics, etc.). The solution of these problems requires: a systematic approach, which will encourage the cooperation of agricultural and industrial production, cooperation with importers of meat products and protection of domestic producers in the domestic and international markets, creating a favorable investment and information environment that will promote the meat industry development.

The Research of Measuring Approach and Energy Efficiency for Hadoop Periodic Jobs

2015 ◽  
Vol 8 (1) ◽  
pp. 206-210 ◽  
Author(s):  
Yu Junyang ◽  
Hu Zhigang ◽  
Han Yuanyuan
Keyword(s):  
Energy Efficiency ◽  
Cloud Computing ◽  
Energy Consumption ◽  
Energy Saving ◽  
Energy Estimate ◽  
Cloud Platform ◽  
Periodic Tasks ◽  
Current Consumption ◽  
Reduce Energy Consumption

Current consumption of cloud computing has attracted more and more attention of scholars. The research on Hadoop as a cloud platform and its energy consumption has also received considerable attention from scholars. This paper presents a method to measure the energy consumption of jobs that run on Hadoop, and this method is used to measure the effectiveness of the implementation of periodic tasks on the platform of Hadoop. Combining with the current mainstream of energy estimate formula to conduct further analysis, this paper has reached a conclusion as how to reduce energy consumption of Hadoop by adjusting the split size or using appropriate size of workers (servers). Finally, experiments show the effectiveness of these methods as being energy-saving strategies and verify the feasibility of the methods for the measurement of periodic tasks at the same time.

scholarly journals Exploring the Effects of Industrial Structure, Technology, and Energy Efficiency on China’s Carbon Intensity and Their Contributions to Carbon Intensity Target

2020 ◽  
Vol 12 (19) ◽  
pp. 8016
Author(s):  
Feng Wang ◽  
Min Wu ◽  
Jiachen Hong
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Historical Development ◽  
Industrial Development ◽  
Industrial Structure ◽  
Electricity Production ◽  
Mitigation Measures ◽  
Carbon Intensity ◽  
Intermediate Input ◽  
Residential Energy

To achieve the national carbon intensity (NCI) target, China should adopt effective mitigation measures. This paper aims to examine the effects of key mitigation measures on NCI. Using the input-output table in 2017, this paper establishes the elasticity model of NCI to investigate the effects of industrial development, intermediate input coefficients, energy efficiency, and residential energy saving on NCI, and further evaluates the contributions of key measures on achieving NCI target. The results are shown as follows. First, the development of seven sectors will promote the increase of NCI while that of 21 sectors will reduce NCI. Second, NCI will decrease significantly with the descending of intermediate input coefficients of sectors, especially electricity production and supply. Third, improving energy efficiency and residential energy saving degree could reduce NCI, but the latter has limited contribution. Fourth, the development of all sectors will reduce NCI by 10.11% in 2017–2022 if sectors could continue the historical development trends. Fifth, assuming that sectors with rising intermediate input coefficients would keep their coefficients unchanged in the predicting period and sectors with descending coefficients would continue the historical descending trend, the improvement of technology and management of all sectors will reduce NCI by 14.02% in 2017–2022.

Sign in / Sign up

Export Citation Format

Share Document