Determination of patulin and hydroxymethylfurfural in beverages by UPLC-PDA

2020 ◽  
pp. 1-8
Author(s):  
M. Pernica ◽  
J. Martiník ◽  
R. Boško ◽  
V. Zušťáková ◽  
K. Benešová ◽  
...  
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Penicillium Expansum ◽  
Limit Of Quantification ◽  
Accuracy And Precision ◽  
Relative Standard ◽  
Validation Parameters ◽  
Photodiode Array ◽  
Quantification Accuracy

The present study describes using molecularly imprinted polymer (MIP) technology for determination of patulin (PAT) and 5-hydroxymethylfurfural (5-HMF) in beverages by ultra-high performance liquid chromatography coupled to photodiode array (UPLC-PDA). PAT (4-hydroxy-4H-furo[3,2-c]pyran-2(6H)-one) is a mycotoxin produced by Penicillium fungi and Penicillium expansum is probably the most commonly encountered species that infects apples during their growth, harvest, storage or processing. The occurrence of PAT as a natural contaminant of apples is a worldwide problem. 5-HMF (also known as 5-(hydroxymethyl) furan-2-carbaldehyde), is formed in the Maillard reaction as well as during caramelisation. It is a good storage time-temperature marker and flavour indicator, especially in beverages such as wine, beer, but also cider and apple juice which may contain PAT. PAT and 5-HMF were separated within 2 min using a Luna Omega C18 column and the PDA detector wavelength was set to 276 nm. The validation parameters of the analytical method such as linearity, limit of detection, limit of quantification, accuracy and precision were tested. The calibration curves were linear at least in the range 50-1000 ng/ml with a good linearity (R2>0.999) for both analytes, the limit of detection and the limit of quantification for PAT and 5-HMF were in the range 4.9-6.6 and 16.1-21.8 μg/l, respectively. The recoveries of the selected analyte were in the range 61.9-109.0% with a precision of <8.2% (relative standard deviation (RSD)) for PAT and in the range 50.8-98.0% with a precision of <10.0% (RSD) for 5-HMF. The validated procedure was successfully applied for the analysis of PAT and 5-HMF in beverages from retail shops.

Nanoparticulate Mycophenolic Acid Eye Drops - Analytical Validation of a High Performance Liquid Chromatography Assay and Stability Studies

2021 ◽  
Vol 09 ◽  
Author(s):  
Ali Al-Kulabi ◽  
Louis Gooden ◽  
Ijeoma F. Uchegbu
Keyword(s):  
Mycophenolic Acid ◽  
High Performance ◽  
Limit Of Detection ◽  
Immunosuppressive Agent ◽  
Plate Count ◽  
Eye Drops ◽  
Limit Of Quantification ◽  
Drug Content ◽  
Relative Standard ◽  
Validation Parameters

Background: Mycophenolic acid (MPA), an immunosuppressive agent, is used orally to reduce corneal graft rejection. However its oral use is associated with gastrointestinal side effects. Objectives: To prepare MPA nanoparticle eye drops and a validated analytical method. Methods: Aqueous MPA eye drops were prepared by nanoencapsulation of MPA using Nanomerics MET (N-palamitoylN-monomethyl-N,N-dimethyl-N,N,N-trimethyl-6-O-glycolchitosan) at a MET, MPA ratio of 7.5: 1 g g-1 in the presence of glycerol (2.75% w/w). A validated MPA in-formulation drug substance assay was then developed. Results: MET-MPA formulations were prepared as well as a validated assay. Assay validation parameters for the analysis of MPA in the formulation were satisfactory [Plate count = 16458, Capacity Factor = 2.4, Tailing Factor = 1.02, linearity = 0.999 (0.016 – 0.5 mg mL-1 ), limit of detection = 0.056 mg mL-1 , limit of quantification = 0.17 mg mL-1 , accuracy = 98%, intraday and interday relative standard deviation = 0.45% and 4% respectively]. The candidate formulation (z - average mean = 66 ± 0.4 nm, polydispersity index = 0.12 ± 0.012, drug content = 1.14 ± 0.003 mg mL-1 , zeta potential = +8.5 ± 1.4 mV, pH = 7.4 ± 0.02, osmolarity = 309 ± 1.5 mOSm L-1 , viscosity = 1.04 ± 0.001 mPa.s) was then found to be stable for 14 days with respect to drug content at refrigeration, room and accelerated (40C )temperature and. All other formulation parameters were within the ocular comfort range. Conclusions: A validated assay (ICH and US FDA guidelines) for new MPA nanoparticle eye drops has been developed.

scholarly journals Determination of Tianeptine in Tablets by High-Performance Liquid Chromatography with Fluorescence Detection

2007 ◽  
Vol 90 (3) ◽  
pp. 720-724
Author(s):  
Sevgi Tatar Ulu
Keyword(s):  
Lower Limit ◽  
High Performance ◽  
Limit Of Detection ◽  
Internal Standard ◽  
Linear Calibration ◽  
Fluorescence Detector ◽  
Relative Standard ◽  
Validation Parameters ◽  
Limit Of Quantitation

Abstract A sensitive and selective high-performance liquid chromatographic method has been developed for the determination of tianeptine (Tia) in tablets. The method is based on derivatization of Tia with 4-chloro-7-nitrobenzofurazan (NBD-Cl). A mobile phase consisting of acetonitrile10 mM orthophosphoric acid (pH 2.5; 77 + 23) was used at a flow rate of 1 mL/min on a C18 column. The Tia-NBD derivative was monitored using a fluorescence detector, with emission set at 520 nm and excitation at 458 nm. Gabapentin was selected as an internal standard. Linear calibration graphs were obtained in the concentration range of 45300 ng/mL. The lower limit of detection (LOD) was 10 ng/mL at a signal-to-noise ratio of 4. The lower limit of quantitation (LOQ) was 45 ng/mL. The relative standard values for intra- and interday precision were &lt;0.46 and &lt;0.57%, respectively. The recovery of the drug samples ranged between 98.89 and 99.85%. No chromatographic interference from the tablet excipients was found. The proposed method was validated in terms of precision, robustness, recovery, LOD, and LOQ. All the validation parameters were within the acceptance range. The proposed method was applied for the determination of Tia in commercially available tablets. The results were compared with those obtained by an ultraviolet spectrophotometric method using t- and F-tests.

Simultaneous Determination of Cholecalciferol and 25- Hydroxycholecalceferol in Lipid-based Self-nanoemulsifying formulations and Marketed Product Vi-de 3® by UHPLC-UV

2019 ◽  
Vol 16 (1) ◽  
pp. 100-109
Author(s):  
Ibrahim Aljuffali ◽  
Fahad Almarri ◽  
A. F. M. Motiur Rahman ◽  
Fars Kaed Alanazi ◽  
Musaed Alkholief ◽  
...  
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Simultaneous Estimation ◽  
Limit Of Quantification ◽  
Column Temperature ◽  
Related Substances ◽  
Accuracy And Precision ◽  
Regulatory Guidelines ◽  
25 Hydroxycholecalciferol

Background: The purpose of the current study was to develop a selective, precise, fast economical and advanced reverse phase ultra-high-performance liquid chromatography (UHPLC UV) method and validate it for the simultaneous estimation of cholecalciferol and its analogue 25- hydroxycholecalciferol in lipid-based self-nano emulsifying formulation (SNEDDS). Methods: The chromatographic separation was simply performed on a Dionex® UHPLC systems (Ultimate 3000, Thermo scientific) by using HSS C18 (2.1x50 mm, 1.8 µm) analytical column. The elution was carried out isocratically with the mobile phase consisting of acetonitrile and methanol in the ratio of 50:50 %v/v with a flow rate of 0.4 ml/min, followed by the UV detection at 265 nm. The injection volume was 1µl and the column temperature was maintained at 45°C. FDA regulatory guidelines were used to develop and validate the method. Results: The current developed UHPLC-UV method was found to be rapid (run time 2 min), and selective with the high resolution of cholecalciferol and 25-hydroxycholecalciferol (RT=0.530 min & 1.360 min) from different lipid matrices. The method was highly sensitive (Limit of Detection and Lower Limit of Quantification were 0.13 ppm & 0.51ppm, and 0.15 ppm & 0.54 ppm, respectively). The linearity, accuracy and precision were determined as suitable over the concentration range of 0.5-50.0 ppm for both the analytes. Conclusion: The proposed UHPLC-UV method can be used for the determination of cholecalciferol and 25-hydroxycholecalciferol in SNEDDS and marketed Vi-De 3® as pure forms (intact) with no interference of excipients or drug-related substances.

scholarly journals ESTIMATION OF GUGGULSTERONE-Z IN GOKSHURADI GUGGULU USING REVERSED-PHASE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY

2018 ◽  
Vol 11 (11) ◽  
pp. 204
Author(s):  
Kanan G Gamit ◽  
Niraj Y Vyas ◽  
Nishit D Patel ◽  
Manan A Raval
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
High Performance ◽  
Limit Of Detection ◽  
Reversed Phase ◽  
Array Detector ◽  
Limit Of Quantification ◽  
Photodiode Array Detector ◽  
Validation Parameters ◽  
Photodiode Array

Objective: A study was aimed to estimate guggulsterone-Z (GZ) in Gokshuradi Guggulu (GG).Methods: An analytical method was developed and validated using Waters Alliance high-performance liquid chromatography system (Empower software), equipped with photodiode array detector. Separation was achieved using Phenomenex, C-18 (250 mm×4.6 mm, 5 μ) column. Mobile phase consisted of acetonitrile:water (70:30,v/v). Flow rate was set to 1 ml/min and detection was performed at 251 nm.Results and Discussion: Validation parameters such as linearity, precision, accuracy, limit of detection, limit of quantification, and robustness were performed. Amount of GZ was estimated using linearity equation.Conclusion: GG was found to contain 0.815±0.03 g% w/w GZ. Validated method may be used as one of the parameters to standardize the formulation.

scholarly journals ANALYTICAL METHOD VALIDATION OF ICP-AES FOR ANALYSIS OF CADMIUM, CHROMIUM, CUPRUM, MANGAN AND NICKEL IN MILK

2019 ◽  
pp. 341-344
Author(s):  
DAVID ALEXANDER ◽  
Abdul Rohman
Keyword(s):  
Heavy Metals ◽  
Analytical Method ◽  
Limit Of Detection ◽  
Official Method ◽  
Fast Method ◽  
Limit Of Quantification ◽  
Milk Products ◽  
Relative Standard ◽  
Validation Parameters

Objective: The aim of this research was to validate inductively coupled plasma-atomic emission spectroscopy (ICP-AES) for quantitative analysis of cadmium (Cd), chromium (Cr), cuprum (Cu), mangan (Mn) and nickel (Ni) in milk products. Methods: The heavy metals in milk were determined using ICP-AES at optimized wavelength. The method was validated by assessing several validation parameters which included linearity and range, accuracy, precision and sensitivity expressed by the limit of detection and limit of quantification. The validated method was then used for the analysis of milks commercially available. Results: ICP-AES for determination of Cd, Cr, Cu, Mn, and Ni was linear over a certain concentration range with a coefficient correlation value of>0.997. The limit of quantification values of Cd, Cr, Cu, Mn, and Ni were 0.0047; 0.0050; 0.0066; 0.0061; and 0.0169 µg/ml, respectively. The precision of analytical method exhibited relative standard deviation (RSD) values of 3.18%; 4.17%; 3.05%; 2.93%; and 4.47% during repeatability test and 5.28%; 5.06%; 3.67%; 3.67%; and 11.17% during intermediate precision of Cd, Cr, Cu, Mn, and Ni respectively. The recoveries of these metals assessed using standard addition method were 92.25; 90.88; 102.87; 94.50; and 86.85%, respectively. Conclusion: ICP-AES offered a reliable and fast method for the determination of heavy metals in milk products. The developed method could be proposed as an official method for determination of heavy metals in milk products.

scholarly journals ULTRAVIOLET-SPECTROPHOTOMETRIC METHOD DEVELOPMENT AND VALIDATION FOR THE DETERMINATION OF NORFLOXACIN PRESENT IN TASTE MASKED DRUG RESIN COMPLEX

2018 ◽  
Vol 11 (4) ◽  
pp. 244
Author(s):  
Ayya Rajendra Prasad ◽  
Jayanthi Vijaya Ratna
Keyword(s):  
Spectrophotometric Method ◽  
Absorption Maximum ◽  
Method Development ◽  
Limit Of Detection ◽  
Statistical Parameters ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Validation Parameters ◽  
Development And Validation

 Objective: The objective of this study was developed and validated a novel, specific, precise, and simple ultraviolet (UV)-spectrophotometric method for the estimation of norfloxacin present in taste masked drug-resin complex.Methods: UV-spectrophotometric determination was performed with ELICO SL 1500 UV-visible spectrophotometer using 0.1 N HCl as a medium. The spectrum of the standard solution was run from 200 to 400 nm range for the determination of absorption maximum (λ max). λ max of norfloxacin was found at 278 nm. The absorbance of standard solutions of 1, 2, 3, 4, and 5 μg/ml of drug solution was measured at an absorption maximum at 278 nm against the blank. Then, a graph was plotted by taking concentration on X-axis and absorbance on Y-axis which gave a straight line. Validation parameters such as linearity and range, selectivity and specificity, limit of detection (LOD) and limit of quantification (LOQ), accuracy, precision, and robustness were evaluated as per the International Conference on Harmonization (ICH) guidelines.Results: Linearity for the UV-spectrophotometric method was noted over a concentration range of 1–5 μg/ml with a correlation coefficient of 0.9995. The LOD and LOQ for norfloxacin were found at 0.39 μg/ml and 1.19 μg/ml, respectively. Accuracy was in between 99.00% and 99.17%. % relative standard deviation for repeatability, intraday precision, and interday precision was found to be 0.600, in between 0.291 and 0.410, and in between 0.682 and 1.439, respectively. The proposed UV spectrophotometric method is found to be robust.Conclusion: The proposed UV-spectrophotometric method was validated according to the ICH guidelines, and results and statistical parameters demonstrated that the developed method is sensitive, precise, reliable, and simple for the estimation of norfloxacin present in taste masked drug-resin complex.

scholarly journals Spectrophotometric Method for the Determination of Drugs Containing Phenol Group by Using 2, 4- Dinitrophenylhydrazine

2010 ◽  
Vol 7 (2) ◽  
pp. 395-402
Author(s):  
Padmarajaiah Nagaraja ◽  
Ashwinee Kumar Shrestha
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Dosage Forms ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Forms ◽  
Accuracy And Precision ◽  
Relative Standard ◽  
Phenolic Drugs

A spectrophotometric method has been proposed for the determination of four phenolic drugs; salbutamol, ritodrine, amoxicillin and isoxsuprine. The method is based on the oxidation of 2, 4- dinitrophenyl-hydrazine and coupling of the oxidized product with drugs to give intensely colored chromogen. Under the proposed optimum condition, beer’s law was obeyed in the concentration range of 2.5-17, 2-29, 4-33 and 5-30 μg/mL for salbutamol, ritodrine, amoxicillin and isoxsuprine respectively. The limit of detection (LOD) and limit of quantification (LOQ) were 0.2, 0.83, 0.09, 0.84 μg/mL and 0.66, 2.79, 0.3 and 2.81 μg/mL in the same order. No interference was observed from common pharmaceutical adjuvants. The ringbom plots and low relative standard deviation assert the applicability of this method. The suggested method was further applied for the determinations of drugs in commercial pharmaceutical dosage forms, which was compared statistically with reference methods by means oft- test andF- test and were found not to differ significantly at 95% confidence level. The procedure is characterized by its simplicity with accuracy and precision.

scholarly journals Micelle-Mediated Extraction Prior to LC-UV for Preconcentration and Determination of Trace Amounts of Bisphenol A in Environmental Samples

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Naghi Saadatjou ◽  
Shahab Shariati ◽  
Mostafa Golshekan
Keyword(s):  
Bisphenol A ◽  
High Performance ◽  
Limit Of Detection ◽  
Aqueous Samples ◽  
Limit Of Quantification ◽  
Rich Phase ◽  
Factors Affecting ◽  
Relative Standard ◽  
Triton X

A simple and high sensitive preconcentration method based on micelle-mediated extraction followed by high performance liquid chromatography (LC-UV) was developed for preconcentration and determination of trace amounts of bisphenol A (BPA) in aqueous samples. The BPA was quantitatively extracted from aqueous samples in the presence of Triton X-114 as a nonionic surfactant and preconcentrated into the small volume (about 30 μL) of the surfactant-rich phase. Taguchi method, an orthogonal array design (OA16 (45)), was utilized to optimize the various factors affecting the micellar extraction of BPA. The maximum extraction efficiency of BPA was obtained at pH 3, 0.2% (w/v) Triton X-114, and 0.25 mol L−1 sodium acetate. For the preconcentration, the solutions were incubated in a thermostatic water bath at 50°C for 7 min. After centrifuge and separation of aqueous phase, the surfactant-rich phase was diluted with 100 μL acetone and injected in the chromatographic system. Under the optimum conditions, preconcentration factor of 34.9 was achieved for extraction from 10 mL of sample solution and the relative standard deviation (RSD%) of the method was lower than 6.6%. The calibration curve was linear in the range of 0.5–150 μg L−1 with reasonable linearity (r2>0.9987). The limit of detection (LOD) based on S/N = 3 was 0.13 μg L−1 for 10 mL sample volumes. The limit of quantification (LOQ) based on S/N = 10 was 0.43 μg L−1 for 10 mL sample volumes. Finally, the applicability of the proposed method was evaluated by the extraction and determination of BPA in the real samples, and satisfactory results were obtained.

scholarly journals Extraction and Determination of Oxymatrine Pesticide in Environmental Sample and in its Formulation using High-Performance Liquid Chromatography

2020 ◽  
Vol 8 (2) ◽  
pp. 1-7
Author(s):  
Ihsan M. Shaheed ◽  
Saadiyah A. Dhahir
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Water Samples ◽  
High Performance ◽  
Limit Of Detection ◽  
Limit Of Quantification ◽  
Chromatography Method ◽  
Relative Standard ◽  
Dispersive Liquid Liquid Microextraction

The quinolizindine alkaloid compound, oxymatrine pesticide, was analysis in the river water samples collected from different agriculture areas in the Iraqi city of Kerbala and also in its formulation using developed reverse-phase high-performance liquid chromatography method. Acetonitrile:methanol (60:40 v/v) was chosen as mobile phase at pH (7.0), flow rate 0.5 mL/min, and 20 µL as volume injection. Modified ecological-friendly method, dispersive liquid-liquid microextraction, was used for the extraction of oxymatrine from water samples. Linearity study was constructed from 0.1 to 70 μg/mL at λmax 205 nm. The limit of detection and limit of quantification were 0.025 and 0.082 μg/mL, respectively, and the relative standard deviation (RSD) % was 0.518%. Three spiked levels of concentration (20.0, 40.0, and 70.0 μg/mL) were used for the validation method. The percentage recovery for the three spiked samples was ranged between 98.743 and 99.432 and the RSD% was between 0.051 and 0.202%, the formulation studies of oxymatrine between 99.487 and 99.798, and the RSD% was ranged from 0.045 to 0.057%. The developed method can be used accurately and selectively for the determination of oxymatrine in environmental samples and in the formulation.

scholarly journals DEVELOPMENT AND VALIDATION OF RP-HPLC METHOD FOR THE ESTIMATION OF ESCITALOPRAM OXALATE AND FLUPENTIXOL DIHYDROCHLORIDE IN COMBINED DOSAGE FORM AND PLASMA

2021 ◽  
pp. 61-66
Author(s):  
MALATHI SELLAPPAN ◽  
DARTHI DEVAKUMAR
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Accuracy And Precision ◽  
Relative Standard ◽  
Photodiode Array ◽  
Development And Validation ◽  
Potassium Dihydrogen Orthophosphate

Objective: The objective of the study was to develop a simple and rapid chromatographic method for quantification of escitalopram oxalate and flupentixol dihydrochloride in combined dosage form and plasma. Methods: The separation was achieved with a sun fire C8 [150×4.6 mm] 3.5 µm column with an isocratic mobile phase containing a mixture of potassium dihydrogen orthophosphate buffer: methanol: acetonitrile [30:60:10 v/v/v] pH adjusted to 11. The flow rate of the mobile phase was 1.5 ml/min with a Photodiode array [PDA] detection at 230 nm. Results: The HPLC method was developed and validated with respective linearity, accuracy, and precision, detection of limit, robustness, and specificity. The precision of the results stated as the relative standard deviation was below 2 %. The calibration curve was linear over a concentration range from 10-50 µg/ml for escitalopram oxalate and 1-5 µg/ml for flupentixol dihydrochloride with a correlation co-efficient 0.994 and 0.977 respectively. The accuracy of the method was demonstrated at levels in the range of 100 % and 120 % of the specification limit. The recovery of escitalopram oxalate and flupentixol dihydrochloride was found to be in the range of 90 % to 88 %, respectively. The lowest detection limits were found to be 2 µg/ml for escitalopram oxalate and 0.1 µg/ml for flupentixol dihydrochloride. The lowest quantification limits were found to be 5 µg/ml of escitalopram oxalate and 0.5 µg/ml of flupentixol dihydrochloride. Conclusion: The developed method was validated for linearity, accuracy, precision, the limit of detection and quantification, specificity. The method was applied successfully for the determination of escitalopram oxalate and flupentixol dihydrochloride in the combined dosage form and plasma.

Sign in / Sign up

Export Citation Format

Share Document