scholarly journals Effect of selenium and zinc foliar application to increase the quantitative and qualitative yields of rapeseed at different sowing dates

2022 ◽  
Vol 72 (4) ◽  
pp. e428
Author(s):  
A. Goharian ◽  
A.H. Shirani Rad ◽  
P. Moaveni ◽  
H. Mozafari ◽  
B. Sani
Keyword(s):  
Seed Yield ◽  
Oil Content ◽  
Foliar Application ◽  
Block Design ◽  
Pure Water ◽  
Oil Quality ◽  
Sowing Date ◽  
Oil Yield ◽  
Zinc Treatment ◽  
Sowing Dates

The sowing date is an important factor for expanding the cultivated area of rapeseed and affects seed yield, oil content, and fatty acid compounds. Micronutrient elements play an important role in improving the vegetative and reproductive growth of the plant, especially under conditions of biological and environmental stresses. A two-year experiment (2014-2016) was performed to study the response of rapeseed genotypes to foliar application of micronutrients on different sowing dates. The treatments were arranged as a factorial-split plot in a randomized complete block design with three replicates. Three sowing dates of 7 (well-timed sowing date), 17, and 27 (delayed sowing dates) October and two levels of foliar application with pure water (control), selenium (1.5%), zinc (1.5%), and selenium+zinc (1.5%) were factorial in the main plots and five genotypes of SW102, Ahmadi, GKH2624, GK-Gabriella, and Okapi were randomized in the subplots (a total of 30 treatments). Seed yield, oil yield and content, oleic acid, and linoleic acid were reduced when rapeseeds were cultivated on 17 and 27 October, while the contents in palmitic, linolenic, and erucic acids, and glucosinolate increased (p < 0.01). a selenium+zinc treatment improved seed yield, oil content and yield (p < 0.01). The oil quality increased due to increased contents of oleic and linoleic acids under the selenium+zinc treatment (p < 0.01). The GK-Gabriella and GKH2624 genotypes are recommended to be sown on well-timed (7 October) and delayed sowing dates (17 and 27 October) and treated with selenium+zinc due to the higher oil yield, linoleic and oleic acids.

Sowing date affects yield components of canarygrass seed

2003 ◽  
Vol 83 (2) ◽  
pp. 357-362 ◽  
Author(s):  
J. L. Bodega ◽  
M. A. De Dios ◽  
M. M. Pereyra Iraola
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Dry Matter ◽  
Developmental Stages ◽  
Block Design ◽  
Sowing Date ◽  
Growing Seasons ◽  
Sowing Dates ◽  
Four Blocks ◽  
Number Of Seeds

Canarygrass (Phalaris canariensis L.) crops are sown from June to mid-September in the southeastern area of the province of Buenos Aires, Argentina. Sowing dates in this range result in different growing temperatures and photoperiods that affect the duration of developmental stages, biomass production, and seed yield and its components. For Argentina, there are no reported studies that address these effects. This study on the effects of sowing date was conducted during four growing seasons (1996–1999) at the Instituto Nacional de Tecnologí a Agropecuaria (INTA) Experimental Station at Balcarce, Argentina, using a population provided by Dr. Jaime Lloveras, University of Leyda, Spain. Different seeding dates were chosen from June to mid-September. The experiment was a randomized complete block design with four blocks. When the sowing date was delayed, total dry matter (DM) decreased. For early sowing dates seed yield was constant, but after 10 August it was reduced by 1.5% for each day of delay. Earlier sowing increased the duration of pre-anthesis development with greater uniformity in panicle size and the number of seeds. Seed yield was related lin early to the number of seeds and plant dry matter yield (DMY). The rate of progress from emergence to anthesis (1/days from emergence to anthesis) was proportional to the mean photoperiod. Under the environmental conditions in Balcarce, the accumulated required thermal units for anthesis was reduced when sowing was delayed from June to September. This reduction was related to the photoperiod and was estimated as –189.3 growing degree-days per hour of photoperiod increment. Key words: Canarygrass, seed yield, sowing date, yield components

scholarly journals COMPARATIVE EVALUATION OF QUALITY PROPERTIES OF WINTER RAPESEED DEPENDING ON THE LEVEL OF FERTILIZERS AND SOWING DATE

2020 ◽  
pp. 108-118
Author(s):  
Olha Matsera
Keyword(s):  
Protein Content ◽  
Quality Indicators ◽  
Oil Content ◽  
Oil Quality ◽  
Acid Value ◽  
Sowing Date ◽  
Quality Properties ◽  
Sowing Dates ◽  
Winter Rapeseed ◽  
Fertilizer Rates

It is made the comparison estimation of winter rapeseed quality properties depending on the fertilization level and sowing date in this article. The literature on the research problem is elaborated; there are presented the study importance and relevance of growing technology elements influence on the quality properties of winter rapeseed seeds. It is analyzed the results of sowing periods and different rates of mineral fertilizers influence on the quality indicators of winter rapeseed seeds under the conditions of Right-Bank Forest-Steppe in Ukraine. Significant influence of the studied elements of technology on the main indicators of seed quality was noted; it was found that the change in the yield level obtained by the hybrids led to a change in the oil quality indices. Four the most important oil quality indicators were analyzed in this article. They are: acid value, glucosinolates amount, oil and protein contents. They were affected by different fertilizer rates and sowing dates, which were the experiment conditions. So, the lowest acid value – 1.08 provided hybrid Excel, when fertilizer rate was N240P120K24; when sowing dates were analyzed, the lowest indicator – 1.24 was obtained by Exagon hybrid in the first sowing date – 10th of Aug. the correlation between acid value and rapeseed yield was negative and oscillated from r = - 0.9327 to r = - 0.9843; the magnitude of the approximation reliability oscillated in the range of R2 = 0.87 – 0.97, which evidence the strong dependence between indicators. The lowest content of glucosinolates – 12.51 μmol / g had Excel hybrid under the conditions without fertilizers; when sowing dates were analyzed, the lowest indicator 15.06 μmol / g was obtained by Exagon hybrid in the first sowing date – 10th of Aug. The highest oil content had Excel hybrid – 46.27%, it was obtained in variant of N240P120K240. The protein content of each hybrid was increasing with fertilizer rates expansion. So, the highest indicator of it was obtained in the variant where N240P120K240 was used and it was Exagon – 22.10%. The highest protein content – 21.13% was obtained by Excel hybrid in the second sowing date – the 21st of Aug. when sowing dates were analyzed, and the highest oil content – 46.75% were obtained by Excel hybrid in the third sowing date – 5th of Sept. Key words: winter rapeseed, sowing dates, fertilizers, acid value, glucosinolates amount, oil and protein contents.

scholarly journals Effect of some agronomic technical in morphologe traits, yield compound and oil of rape seed c.v. pactol

2008 ◽  
Vol 5 (1) ◽  
pp. 1-7
Author(s):  
Baghdad Science Journal
Keyword(s):  
Seed Yield ◽  
Nitrogen Fertilizer ◽  
Field Trial ◽  
Oil Content ◽  
Block Design ◽  
Oil Yield ◽  
Abu Ghraib ◽  
Research Station ◽  
High Nitrogen ◽  
Rape Seed

A field trial was conducted at Abu-Ghraib research station , Baghdad , Iraq . The objectives were to study the effect of nitrogen fertilizer and planting space on the performance of rape seed. A split-plot in a randomized complete of block design with three replications were used. Five levels of nitrogen fertilizer ( 120,160,200,240,280 Kg / ha ) were assigned to main plots, where as planting space in sub-plots. The result obtained confirmed that 280,240 kg / ha nitrogen maximized seed yield 1.830 , 1.773 ton/ha, oil yield,0.843,0.824 ton/ha .Results showed that planting space 30 cm produced the highest seed yield 1.90 ton / ha and oil yield , 0.884 ton / ha . Interactions between nitrogen fertilizer and planting space were also detected plants gave the highest seed yield 2.253 ton / ha and oil yield 1.045 ton /ha that 280kg/ha nitrogen ,30cm planting space and produced more oil content 48.54 % that 120 kg / ha nitrogen compared with high nitrogen fertilizer levels .

scholarly journals Physiological Traits Study to Identify Suitable Mustard Genotype for Late Sown Condition of Northern Part of India

2021 ◽  
Author(s):  
Akanksha Singh Yadav ◽  
Lallu . ◽  
Maharaj Singh
Keyword(s):  
Seed Yield ◽  
Oil Content ◽  
Sandy Loam ◽  
Cropping Systems ◽  
Indian Mustard ◽  
Sowing Date ◽  
Rabi Season ◽  
Sowing Time ◽  
Sowing Dates ◽  
Loam Soil

Background: Indian mustard (Brassica juncea L.) is a prominent seed crop grown in most of the northern part of India. It is also grown in different cropping systems where sowing time differs as per availability of vacant field prior to preceding crop. Being a rabi season (winter) crop its physiological as well as morphological developments are markedly influenced by temperature condition.Methods: An investigation was carried out during rabi season of 2010-11 and 2011-2012 at oilseeds research farm Kanpur (UP) with 4 sowing dates (30th Sept. 11th 21st, 31st Oct.) and 5 genotypes (Kranti, Maya, PAC-437, PBR-357, Rohini) of mustard on sandy loam soil under irrigated condition to study different physiological and yield attributing characters.Result: The results shown that among the sowing dates, 11th October registered the highest values of specific leaf weight (SLW), Crop Growth rate (CGR) estimated at 60-90 DAS, seed yield and oil content. The early sowing at 30th Sept. registered significantly lowest seed yield (1880 Kgha-1) and seed oil content (38%). In case of genotypes, PAC-437 registered highest values of SLW (29.60 mgcm-2), NAR (113.3 mg dm-2 day-1), RGR (26.7 mg g-1 day-1), CGR (0.94g plant-1 day) at 60-90 DAS, seed yield (2079 kg ha-1). The interaction effect of sowing date × genotypes was found significant in most of the cases. Thus, the results concluded in Indian condition specially the northern part, 11th October proved to be the optimum sowing time of mustard. As far as the genotype is concerned, Kranti perform well of this date of sowing while PAC-437 proved its superiority over other genotypes as well as different sowings date of October month.

scholarly journals Genotype and Sowing Date Effects on Seed Yield of Olitorius Jute in Late Season

2020 ◽  
Vol 22 (2) ◽  
pp. 83-89
Author(s):  
ATMM Alam ◽  
MM Haque
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Sowing Date ◽  
Late Season ◽  
Sowing Dates ◽  
Randomized Complete Block Design ◽  
Thousand Seed Weight ◽  
Number Of Branches

Feld experiments were conducted at four locations of Bangladesh (Manikgonj, Cumilla, Dinajpur and Joshore) to optimize sowing date for higher seed yield of jute in late sown condition. The experimental variables constituted with three genotypes (O-72, O-3820 and Acc.4311) and three sowing dates (31 July, 15 August and 30 August).Each experiment was laid out in a randomized complete block design with three replications. The treatment combinations were assigned randomly and afresh randomization was followed in each replication. Results showed that the genotype Acc.4311, O-72 and O- 3820 produced maximum number of branches (5.40, 4.90 and 4.40, respectively) plant-1 on 15 August sowing at Manikgonj. The genotype Acc.4311 produced higher number of pods plant-1 than other two genotypes (O-72 and O-3820) in all sowing dates andat all the locations. The highest number of seedspod-1 (220.80) was found from the genotype Acc.4311grown at Manikgonj which was statistically similar (196.90) with that of the same genotype sown on the same date at Joshore. The highest thousand seed weight (2.478 g) was recorded from the seeds of genotype Acc.4311 sown on 15 August at Manikgonj followed by same genotype at Joshore.Finally, the genotype Acc.4311 sown on 15 August produced the highest seed yield (2.478 t ha-1) at Manikgonjwhich was significantly higher than those of sown on 31 July and 30 August at the same location. As the genotype Acc.4311 was found outstanding sown on 15 August over locations, this genotype may be considered promising for higher seed yield of olitorius jute in late season. Bangladesh Agron. J. 2019, 22(2): 83-89

Response of sowing dates and bio regulators on yield of clusterbean under current climate in alley cropping system in eastern U.P., India

2018 ◽  
Author(s):  
Hemraj Meena ◽  
Ram Swaroop Meena ◽  
Rattan Lal ◽  
Gulab Singh Yadav ◽  
Tarik Mitran ◽  
...  
Keyword(s):  
Salicylic Acid ◽  
Seed Yield ◽  
Alley Cropping ◽  
Foliar Application ◽  
Growth Parameters ◽  
Foliar Spray ◽  
Cropping System ◽  
Sowing Date ◽  
Sowing Dates ◽  
Late Sowing

The impacts on yields of cluster bean were assessed for normal (15 July) and late (30 July) sowing environments and foliar spray of thiourea (500, 1000 ppm) and salicylic acid (50, 100 ppm) at 45 and 60 days after sowing (DAS).Significantly higher yield parameters, yield, economics, protein content and nutrient uptake were recorded with foliar spray of thiourea at 500 ppm as compared to all other bio regulator sprays. Similarly, spray of salicylic acid at 100 ppm enhanced yield and other growth parameters which were statistically at par with those for thiourea 500 ppm foliar spray at 45 and 60 DAS. The data show that the foliar application of bio regulators at normal sowing date enhances seed yield of clusterbean by improving the physiological processes. The interaction effects were significant between the sowing date and bio-regulators on the seed yield. The highest seed yield of 993 and 845 kg/ha was obtained with foliar spray of thiourea at 500 ppm in normal and late sowing, respectively, while the lowest yield of 775 and 769 kg/ha was obtained for the water spray control in normal and late sowing, respectively.

scholarly journals Response of niger (Guizotia abyssinica) to different levels of nitrogen, phosphorus, potassium and sulphur

2021 ◽  
Vol 17 (2) ◽  
pp. 462-468
Author(s):  
P. Bora ◽  
P. C. Bora ◽  
K. Kurmi ◽  
S. Kalita
Keyword(s):  
Seed Yield ◽  
Oil Content ◽  
Block Design ◽  
Growth Yield ◽  
Growth And Yield ◽  
Oil Yield ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Nitrogen Phosphorus ◽  
Different Levels

A field experiment was conducted at Instructional-cum-Research (ICR) Farm, Assam Agricultural University, Jorhat during Rabi seasons of 2016-17 and 2017-18 to study the response of niger to different levels of nitrogen, phosphorus and potassium as well as sulphur on growth, yield and oil content of niger. The experiment was laid out in Factorial Randomized Block Design with three replications. The treatments comprised of three NPK levels viz., F1 (20-10-10 kg N-P2O5-K2O ha-1), F2 (25-12.5- 12.5 kg N-P2O5-K2O ha-1), F3 (30-15-15 kg N-P2O5-K2O ha-1) and three S levels viz., S1 (no sulphur), S2 (10 kg S ha-1), S3 (20 kg S ha-1). Application of F3 (30-15-15 kg N-P2O5-K2O ha-1) and S3 (20 kg S ha-1) recorded maximum and significantly higher seed yield (q ha-1), oil content (%), oil yield (q ha-1) as well as growth and yield attributing parameters viz., plant height, number of leaves plant-1, number of branches plant-1, number of capitulum plant-1 and number of seeds capitulum-1 during both the years. Test weight was not influenced significantly during both the years. Interaction effects of NPK (F) and sulphur (S) were found to be not significant in respect of growth and yield attributing characters in both the years. In case of seed yield (q ha-1) and oil yield (q ha-1) interaction effect were found to be significant in both the years.The highest gross return (Rs. 23,905.00 in 2016-17 and Rs. 22,400.00 in 2017-18) and net return (Rs. 11,184.86 in 2016-17 and Rs. 9679.86 in 2017-18) were recorded by F3S3 in both the years. In case of benefit-cost ratio, the higher value (1.88 and 1.76, respectively) was recorded with F3S3 during 2016-17 and 2017-18.

scholarly journals Effect of some agronomic technical in morphologe traits, yield compound and oil of rape seed c.v. pactol

2007 ◽  
Vol 4 (4) ◽  
pp. 530-536
Author(s):  
Baghdad Science Journal
Keyword(s):  
Seed Yield ◽  
Nitrogen Fertilizer ◽  
Field Trial ◽  
Oil Content ◽  
Block Design ◽  
Oil Yield ◽  
Research Station ◽  
High Nitrogen ◽  
Rape Seed ◽  
Autumn Season

A field trial was conducted at Abu-Ghraib research station , Baghdad , Iraq , during the autumn season of 2006. The objectives were to study the effect of nitrogen fertilizer and planting space on the performance of rape seed. A split-plot in a randomized complete of block design with three replications were used. Five levels of nitrogen fertilizer ( 120,160,200,240,280 Kg / ha ) were assigned to main plots, where as planting space in sub-plots. The result obtained confirmed that 280,240 kg / ha nitrogen maximized seed yield 1.830 , 1.773 ton/ha, oil yield,0.843,0.824 ton/ha .Results showed that planting space 30 cm produced the highest seed yield 1.90 ton / ha and oil yield , 0.884 ton / ha . Interactions between nitrogen fertilizer and planting space were also detected plants gave the highest seed yield 2.253 ton / ha and oil yield 1.045 ton /ha that 280kg/ha nitrogen ,30cm planting space and produced more oil content 48.54 % that 120 kg / ha nitrogen compared with high nitrogen fertilizer levels .

scholarly journals Sulphur doses and application times on yield and oil quality of canola grown in calcareous soil

2020 ◽  
Vol 71 (1) ◽  
pp. 341
Author(s):  
M. Younis ◽  
A. Muhammad ◽  
S. Alam ◽  
A. Jalal
Keyword(s):  
Protein Content ◽  
Seed Yield ◽  
Oil Content ◽  
Block Design ◽  
Oil Quality ◽  
Plot Size ◽  
Randomized Complete Block Design ◽  
Biological Yield ◽  
The University

Pakistan has been constantly deficient in its oil seed production and it is very difficult to meet the edible oil requirement of its ever-increasing population. A field experiment was conducted at the Agronomy Research Farm, The University of Agriculture Peshawar, Northern Pakistan during winter (2013–14). Five sulphur levels (15, 30, 45, 60 and 75 kg·ha-1) and times of application (at seedling, bolting and flowering stages) were used for the canola variety Abasin-95. The experiment was laid out in a randomized complete block design replicated four times on a 5 m × 3.2 m plot size. The results showed that the sulphur-applied plots gave the highest seed yield, biological yield, glucosinolate, erucic acid, oil content, protein content, oleic acid and linoleic acid compared to the control plots. Sulphur applied at the rate of 60 kg·ha-1 and applied at the bolting stage increased seed yield, biological yield, oil content, and protein content.

scholarly journals Effect of Nitrogen Levels on Growth, Yield and Oil Quality of Indian Mustard Grown under Different Plant Densities

2014 ◽  
Vol 47 (1) ◽  
pp. 81-95 ◽  
Author(s):  
S. Keivanrad ◽  
P. Zandi
Keyword(s):  
Seed Yield ◽  
Arid Region ◽  
Harvest Index ◽  
Oil Content ◽  
Oil Quality ◽  
Indian Mustard ◽  
Oil Yield ◽  
Semi Arid Region ◽  
Semi Arid

ABSTRACT The study investigated agronomical and qualitative features of Indian mustard in a semi-arid region from Iran. Field trials were designed in split plot arrangement based on a Randomized Complete Block Design with three replicates at the Agricultural Faculty of Takestan, Iran. In the study, plant height (cm), the number of seeds in the siliqua (seed/siliqua), the number of siliquae in the plant (siliqua/plant), seed yield (kg/ha), biological yield (kg/ha), thousand-seed weight (g), harvest index (%), oil content (%) and oil yield (kg/ha) were determined. The all growth and yield parameters of mustard plant were significantly affected by nitrogen fertilization. All the parameters, except for harvest index (HI), were drastically affected by used densities. The highest seed yield and oil yield (2961 and 1159 kg/ha, respectively) were obtained for the crop utilized with 200 kg N/ha in plots with 80 plants/m2. The maximum oil content (43.97%) was recorded in the lowest plant density (80 plants/m2) and nitrogen application level of 50 kg/ha. Results suggest that in semi-arid region of Takestan, researchers must direct their selection treatments to increase oil quality of Indian mustard

Sign in / Sign up

Export Citation Format

Share Document