Systems with Concentrating Solar Radiation

2014 ◽  
pp. 931-988
Author(s):  
Saša R. Pavlović ◽  
Velimir P. Stefanović
Keyword(s):  
Mathematical Model ◽  
Solar Radiation ◽  
Power Plants ◽  
Numerical Procedure ◽  
Electrical Energy ◽  
Solar Systems ◽  
The World ◽  
Parabolic Dish ◽  
Solar Power Plants ◽  
Potential Use

In this chapter, description and working principles of the parabolic trough power plants, solar tower power plants, parabolic dish power plants, and power plants with Fresnel reflectors in the world and their potential use in Serbia are given. In addition, the examples and technical characteristics of some concetrating solar power plants in the world are given. The cases in which solar cells are used to generate electrical energy are very rare. Solar systems referred as mid temperature (100–400 oC) are considered suitable for integration with industrial processes, cooling, and polygeneration systems through use of concentrating solar collectors. The results of this research may be applied in the construction of small solar systems, but also in the design and construction of large polygeneration systems. Physical and mathematical model is presented, as well as numerical procedure for predicting thermal performances of the P2CC (Parabolic-and-Circular Collector) solar concentrator.

Systems with Concentrating Solar Radiation

2017 ◽  
pp. 788-856
Author(s):  
Saša R. Pavlović ◽  
Velimir P. Stefanović
Keyword(s):  
Mathematical Model ◽  
Power Plants ◽  
Numerical Procedure ◽  
Electrical Energy ◽  
Concentrating Solar Power ◽  
Solar Systems ◽  
The World ◽  
Parabolic Dish ◽  
Solar Power Plants ◽  
Potential Use

In this chapter, description and working principles of the parabolic trough power plants, solar tower power plants, parabolic dish power plants, and power plants with Fresnel reflectors in the world and their potential use in Serbia are given. In addition, the examples and technical characteristics of some concentrating solar power plants in the world are given. The cases in which solar cells are used to generate electrical energy are very rare. Solar systems referred as mid temperature (100–400 oC) are considered suitable for integration with industrial processes, cooling, and polygeneration systems through use of concentrating solar collectors. The results of this research may be applied in the construction of small solar systems, but also in the design and construction of large polygeneration systems. Physical and mathematical model is presented, as well as numerical procedure for predicting thermal performances of the P2CC (Parabolic-and-Circular Collector) solar concentrator.

A review of concentrating solar power plants in the world and their potential use in Serbia

2012 ◽  
Vol 16 (6) ◽  
pp. 3891-3902 ◽  
Author(s):  
Tomislav M. Pavlović ◽  
Ivana S. Radonjić ◽  
Dragana D. Milosavljević ◽  
Lana S. Pantić
Keyword(s):  
Power Plants ◽  
Solar Power ◽  
Concentrating Solar Power ◽  
The World ◽  
Solar Power Plants ◽  
Potential Use

scholarly journals Pemanfaatan Pembangkit Listrik Tenaga Surya Pada Gedung Bertingkat

Kilat ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 115-124
Author(s):  
Tri Joko Pramono ◽  
Erlina Erlina ◽  
Zainal Arifin ◽  
Jef Saragih
Keyword(s):  
Solar Radiation ◽  
Power Plants ◽  
Solar Power ◽  
Electrical Energy ◽  
Solar Panel ◽  
Performance Ratio ◽  
Solar Panels ◽  
Aesthetic Value ◽  
High Rise ◽  
Solar Power Plants

Solar Power Plant is one of the New Renewable Energy power plants. Solar panels can produce unlimited amounts of electrical energy directly taken from the sun, with no rotating parts and no fuel. In this study are optimize solar power plants using hybrid systems with electricity companies and the use of semi-transparent solar panels in high rise buildings to meet the burden of the building. The research will discussed about use of solar power plants using semi-transparent solar panels in multi-storey buildings. The solar panel used for the facade is a semi-transparent solar panel makes its function become two, that is to produce electrical energy as well as glass through which sunlight and can see the view outside the building without reducing the building's aesthetic value. In this study is the value of solar radiation taken from west is the lowest value in November 1.4 Kwh can produce energy PLTS 3,855 Kwh and the highest solar radiation in July amounted to 3.75 Kwh can produce energy PLTS 10.331 Kwh. From the utilization of this PLTS system, Performance Ratio of 85% was obtained using study of 36 panels on the 3rd to 5th floors, this system can be said to feasible.  

scholarly journals Improving the Efficiency of Solar Power Plants

2020 ◽  
Vol 30 (3) ◽  
pp. 480-497
Author(s):  
Dmitriy S. Strebkov ◽  
Yuriy Kh. Shogenov ◽  
Nikolay Yu. Bobovnikov
Keyword(s):  
Power Plant ◽  
Solar Radiation ◽  
Solar Energy ◽  
Power Plants ◽  
Solar Power ◽  
Horizontal Surface ◽  
Solar Power Plant ◽  
Utilization Factor ◽  
Working Surface ◽  
Solar Power Plants

Introduction. An urgent scientific problem is to increase the efficiency of using solar energy in solar power plants (SES). The purpose of the article is to study methods for increasing the efficiency of solar power plants. Materials and Methods. Solar power plants based on modules with a two-sided working surface are considered. Most modern solar power plants use solar modules. The reflection of solar radiation from the earth’s surface provides an increase in the production of electrical energy by 20% compared with modules with a working surface on one side. It is possible to increase the efficiency of using solar energy by increasing the annual production of electric energy through the creation of equal conditions for the use of solar energy by the front and back surfaces of bilateral solar modules. Results. The article presents a solar power plant on a horizontal surface with a vertical arrangement of bilateral solar modules, a solar power station with a deviation of bilateral solar modules from a vertical position, and a solar power plant on the southern slope of the hill with an angle β of the slope to the horizon. The formulas for calculating the sizes of the solar energy reflectors in the meridian direction, the width of the solar energy reflectors, and the angle of inclination of the solar modules to the horizontal surface are given. The results of computer simulation of the parameters of a solar power plant operating in the vicinity of Luxor (Egypt) are presented. Discussion and Conclusion. It is shown that the power generation within the power range of 1 kW takes a peak value for vertically oriented two-sided solar modules with horizontal reflectors of sunlight at the installed capacity utilization factor of 0.45. At the same time, when the solar radiation becomes parallel to the plane of vertical solar modules, there is a decrease in the output of electricity. The proposed design allows equalizing and increasing the output of electricity during the maximum period of solar radiation. Vertically oriented modules are reliable and easy to use while saving space between modules.

Pengembangan Sistem Pengaturan Suplai Beban (Ats) Pada Pembangkit Listrik Tenaga Hibrid Berbasiskan Mikrokontroler

Kilat ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 261-271
Author(s):  
Sugeng Purwanto
Keyword(s):  
Power Plant ◽  
Alternative Energy ◽  
Power Plants ◽  
Solar Power ◽  
Electrical Energy ◽  
Solar Power Plant ◽  
Solar Panels ◽  
Hybrid Power ◽  
Solar Power Plants ◽  
One Year

ABSTRACT Renewable energy is potential alternative energy to replace the central role of fossil energy which has been going on since the early 20th century. The solar power plant is alternative energy, especially for households and industry, and can be designed as a hybrid power plant consisting of solar panels, batteries, an automatic transfer switch (ATS), and a grid. This research will focus on developing ATS based on a microcontroller. It functions to regulate the load supply automatically from the three sources of electrical energy, like solar panels, batteries, and grid while the microcontroller functions to monitor the transfer of power from the solar power plant to grid and voltage movements in the system so that current and voltage data can be recorded from time to time to improve system reliability, effectiveness, and efficiency of the tool. ATS components consist of MCB, magnetic contactor, timer H3CR, relay, 2000VA inverter, solar charge controller 100A, NodeMCU ESP8266 IoT, and battery 12V 100AH. This research is conducted in one year to produce ATS based on a microcontroller that can automatically regulate the supply of loads from the three sources of electrical energy with a good level of efficiency and stability.  Keywords: solar power plants, hybrid power plants, an automatic transfer switch.  ABSTRAK Energi baru terbarukan merupakan energi alternatif yang potensial untuk menggantikan peran sentral dari energi fosil yang telah berlangsung sejak awal abad ke 20. PLTS merupakan salah satu energi alternatif penyedia energi listrik untuk rumah tangga dan industri serta dapat dirancang sebagai sistem pembangkit listrik tenaga hibrid (PLTH) yang terdiri dari panel surya, baterai, sistem pengaturan beban atau ATS (automatic transfer switch) dan jaringan PLN. Peneltian difokuskan pada pengembangan sistem ATS berbasiskan mikrokontroler. ATS berfungsi untuk mengatur suplai beban secara otomatis dari ketiga sumber energi listrik yaitu panel surya, baterai dan PLN sedangkan mikrokontroler berfungsi memonitor perpindahan daya dari PLTS ke sumber PLN dan pergerakan tegangan pada sistem sehingga dapat dilakukan pencatatan data arus dan tegangan dari waktu ke waktu sehingga dapat meningkatkan keandalan sistem, efektifitas dan efisiensi alat. Komponen ATS terdiri dari MCB, magnetic contactor, timer H3CR, relay, inverter 2000VA, solar charge controller 100A, NodeMCU ESP8266 IoT, dan baterai 12V 100Ah. Penelitian ini akan dilakukan dalam periode satu tahun menghasilkan ATS berbasiskan mikrokontroler yang dapat mengatur suplai beban secara otomatis dari ketiga sumber energi listrik dengan tingkat efisiensi dan kestabilan yang baik. Tim penelitian ini tediri dari 3 orang dan berasal dari program studi teknik elektro, IT PLN.  Kata kunci: pembangkit listrik tenaga surya, pembangkit listrik tenaga hibrid, pengaturan suplai beban.

scholarly journals Assessment and Day-Ahead Forecasting of Hourly Solar Radiation in Medellín, Colombia

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4402
Author(s):  
Julián Urrego-Ortiz ◽  
J. Alejandro Martínez ◽  
Paola A. Arias ◽  
Álvaro Jaramillo-Duque
Keyword(s):  
Solar Radiation ◽  
Markov Model ◽  
Power Plants ◽  
Wrf Model ◽  
Tropical Andes ◽  
Clear Sky ◽  
Proposed Model ◽  
Solar Power Plants ◽  
Solar Resource ◽  
Sky Conditions

The description and forecasting of hourly solar resource is fundamental for the operation of solar energy systems in the electric grid. In this work, we provide insights regarding the hourly variation of the global horizontal irradiance in Medellín, Colombia, a large urban area within the tropical Andes. We propose a model based on Markov chains for forecasting the hourly solar irradiance for one day ahead. The Markov model was compared against estimates produced by different configurations of the weather research forecasting model (WRF). Our assessment showed that for the period considered, the average availability of the solar resource was of 5 PSH (peak sun hours), corresponding to an average daily radiation of ~5 kWh/m2. This shows that Medellín, Colombia, has a substantial availability of the solar resource that can be a complementary source of energy during the dry season periods. In the case of the Markov model, the estimates exhibited typical root mean squared errors between ~80 W/m2 and ~170 W/m2 (~50%–~110%) under overcast conditions, and ~57 W/m2 to ~171 W/m2 (~16%–~38%) for clear sky conditions. In general, the proposed model had a performance comparable with the WRF model, while presenting a computationally inexpensive alternative to forecast hourly solar radiation one day in advance. The Markov model is presented as an alternative to estimate time series that can be used in energy markets by agents and power-system operators to deal with the uncertainty of solar power plants.

scholarly journals Numerical simulation of concentrating solar collector P2CC with a small concentrating ratio

2012 ◽  
Vol 16 (suppl. 2) ◽  
pp. 471-482 ◽  
Author(s):  
Velimir Stefanovic ◽  
Sasa Pavlovic ◽  
Marko Ilic ◽  
Nenad Apostolovic ◽  
Dragan Kustrimovic
Keyword(s):  
Mathematical Model ◽  
Fluid Flow ◽  
Solar Radiation ◽  
Solar Energy ◽  
Radiation Intensity ◽  
Solar Collector ◽  
Numerical Procedure ◽  
Working Fluid ◽  
Flow Rates ◽  
Solar Radiation Intensity

Solar energy may be practically utilized directly through transformation into heat, electrical or chemical energy. A physical and mathematical model is presented, as well as a numerical procedure for predicting thermal performances of the P2CC solar concentrator. The demonstrated prototype has the reception angle of 110? at concentration ratio CR = 1.38, with the significant reception of diffuse radiation. The solar collector P2CC is designed for the area of middle temperature conversion of solar radiation into heat. The working fluid is water with laminar flow through a copper pipe surrounded by an evacuated glass layer. Based on the physical model, a mathematical model is introduced, which consists of energy balance equations for four collector components. In this paper, water temperatures in flow directions are numerically predicted, as well as temperatures of relevant P2CC collector components for various values of input temperatures and mass flow rates of the working fluid, and also for various values of direct sunlight radiation and for different collector lengths. The device which is used to transform solar energy to heat is referred to as solar collector. This paper gives numerical estimated changes of temperature in the direction of fluid flow for different flow rates, different solar radiation intensity and different inlet fluid temperatures. The increase in fluid flow reduces output temperature, while the increase in solar radiation intensity and inlet water temperature increases output temperature of water. Furthermore, the dependence on fluid output temperature is determined, along with the current efficiency by the number of nodes in the numerical calculation.

scholarly journals PENGUJIAN KINERJA PEMBANGKIT LISTRIK TENAGA SURYA UNTUK MENGGERAKKAN POMPA AIR

2018 ◽  
Vol 10 (3) ◽  
pp. 44-47
Author(s):  
Muhammad Anwar ◽  
Zulwisli Zulwisli
Keyword(s):  
Power Plants ◽  
Maximum Yield ◽  
Weather Conditions ◽  
Electrical Energy ◽  
Water Pump ◽  
Solar Panels ◽  
Promising Alternative ◽  
Current Maximum ◽  
Solar Power Plants ◽  
Water Pumps

Solar Power Plants (PLTS) is a promising alternative in the provision of electrical energy. In this study built PLTS to drive the load of water pump. The performance of water pumps is tested under various weather conditions. Performed measurements of some important quantities such as voltage, current and timing of the use of the PLTS to drive the water pump. Maximum yield with a one-hour charge occurs in sunny weather conditions at 11-12 WIB. A one-hour charge can move a 75 watts water pump for two hours. Solar panels are also directed towards the sun position resulting in a 40% increase in power at 12-13 pm. Keywords : PLTS, Output Voltage, Output Current, Maximum Power.

Sign in / Sign up

Export Citation Format

Share Document