A Proposed Scalable Environment for Medical Data Processing and Evaluation

Author(s):  
Csaba Horváth ◽  
Gábor Fodor ◽  
Ferenc Kovács ◽  
Gábor Hosszú

Cardiotocography (CTG) is widely used for antenatal monitoring and assessment of fetal well-being. CTG measurement methods based on the phonocardiographic principle and a home-monitoring system utilizing low-cost devices for data acquisition have been proposed and implemented by our research group. Assessment and storage of the recordings are carried out in medical centers, and their calculation capacity is no longer enough to evaluate the ever-increasing amount of incoming data on the constantly growing number of different assessment methods. The present work proposes a new method to create an easily scalable environment based on a P2P principle to share the workload and data between medical centers, while also representing a framework for discovering new correlations between evaluation method results and symptoms of fetal diseases.

2020 ◽  
pp. 102-109
Author(s):  
D.KH. DOMULLODZHANOV ◽  
◽  
R. RAHMATILLOEV

The article presents the results of the field studies and observations that carried out on the territory of the hilly, low-mountain and foothill agro landscapes of the Kyzylsu-yuzhnaya (Kyzylsu-Southern) River Basin of Tajikistan. Taking into account the high-altitude location of households and the amount of precipitation in the river basin, the annual volumes of water accumulated with the use of low-cost systems of collection and storage of precipitation have been clarified. The amount of water accumulated in the precipitation collection and storage systems has been established, the volume of water used for communal and domestic needs,the watering of livestock and the amount of water that can be used to irrigate crops in the have been determined. Possible areas of irrigation of household plots depending on the different availability of precipitation have been determined. It has been established that in wet years (with precipitation of about 10%) the amount of water collected using drip irrigation will be sufficient for irrigation of 0.13 hectares, and in dry years (with 90% of precipitation) it will be possible to irrigate only 0.03 ha of the household plot. On the basis of the basin, the total area of irrigation in wet years can be 4497 ha, and in dry years only 1087 ha. Taking into account the forecasts of population growth by 2030 and an increase in the number of households, the total area of irrigation of farmlands in wet years may reach 5703 hectares,and in dry years – 1379 hectares. Growing crops on household plots under irrigation contributes to a significant increase in land productivity and increases the efficiency of water use of the Kyzylsu-yuzhnaya basin.


Author(s):  
Yasunobu Iwai ◽  
Koichi Shinozaki ◽  
Daiki Tanaka

Abstract Compared with space parts, consumer parts are highly functional, low cost, compact and lightweight. Therefore, their increased usage in space applications is expected. Prior testing and evaluation on space applicability are necessary because consumer parts do not have quality guarantees for space application [1]. However, in the conventional reliability evaluation method, the test takes a long time, and the problem is that the robustness of the target sample can’t be evaluated in a short time. In this report, we apply to the latest TSOP PEM (Thin Small Outline Package Plastic Encapsulated Microcircuit) an evaluation method that combines preconditioning and HALT (Highly Accelerated Limit Test), which is a test method that causes failures in a short time under very severe environmental conditions. We show that this method can evaluate the robustness of TSOP PEMs including solder connections in a short time. In addition, the validity of this evaluation method for TSOP PEM is shown by comparing with the evaluation results of thermal shock test and life test, which are conventional reliability evaluation methods.


2019 ◽  
Author(s):  
Nikki Theofanopoulou ◽  
Katherine Isbister ◽  
Julian Edbrooke-Childs ◽  
Petr Slovák

BACKGROUND A common challenge within psychiatry and prevention science more broadly is the lack of effective, engaging, and scale-able mechanisms to deliver psycho-social interventions for children, especially beyond in-person therapeutic or school-based contexts. Although digital technology has the potential to address these issues, existing research on technology-enabled interventions for families remains limited. OBJECTIVE The aim of this pilot study was to examine the feasibility of in-situ deployments of a low-cost, bespoke prototype, which has been designed to support children’s in-the-moment emotion regulation efforts. This prototype instantiates a novel intervention model that aims to address the existing limitations by delivering the intervention through an interactive object (a ‘smart toy’) sent home with the child, without any prior training necessary for either the child or their carer. This pilot study examined (i) engagement and acceptability of the device in the homes during 1 week deployments; and (ii) qualitative indicators of emotion regulation effects, as reported by parents and children. METHODS In this qualitative study, ten families (altogether 11 children aged 6-10 years) were recruited from three under-privileged communities in the UK. The RA visited participants in their homes to give children the ‘smart toy’ and conduct a semi-structured interview with at least one parent from each family. Children were given the prototype, a discovery book, and a simple digital camera to keep at home for 7-8 days, after which we interviewed each child and their parent about their experience. Thematic analysis guided the identification and organisation of common themes and patterns across the dataset. In addition, the prototypes automatically logged every interaction with the toy throughout the week-long deployments. RESULTS Across all 10 families, parents and children reported that the ‘smart toy’ was incorporated into children’s emotion regulation practices and engaged with naturally in moments children wanted to relax or calm down. Data suggests that children interacted with the toy throughout the duration of the deployment, found the experience enjoyable, and all requested to keep the toy longer. Child emotional connection to the toy—caring for its ‘well-being’—appears to have driven this strong engagement. Parents reported satisfaction with and acceptability of the toy. CONCLUSIONS This is the first known study investigation of the use of object-enabled intervention delivery to support emotion regulation in-situ. The strong engagement and qualitative indications of effects are promising – children were able to use the prototype without any training and incorporated it into their emotion regulation practices during daily challenges. Future work is needed to extend this indicative data with efficacy studies examining the psychological efficacy of the proposed intervention. More broadly, our findings suggest the potential of a technology-enabled shift in how prevention interventions are designed and delivered: empowering children and parents through ‘child-led, situated interventions’, where participants learn through actionable support directly within family life, as opposed to didactic in-person workshops and a subsequent skills application.


2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Arthur Holtzclaw ◽  
Jack Ellis ◽  
Christopher Colombo

Abstract Background Almost half of trainees experience burnout during their career. Despite the Accreditation Council on Graduate Medical Education (ACGME) recommendation that training programs enact well-being curricula, there is no proven method of addressing this difficult topic. Methods We created a curriculum addressing physician resiliency and well-being, designed for an Internal Medicine Residency Program. This curriculum utilized episodes from a medical television series, Scrubs, to facilitate a monthly, 1-h faculty guided discussion group. We collected informal feedback and abbreviated Maslach Burnout Inventories (aMBI) monthly and conducted a formal focus group after 6 months to gauge its effectiveness. Results The curriculum was successfully conducted for 12 months with each session averaging 18–20 residents. Residents reported high satisfaction, stating it was more enjoyable and helpful than traditional resiliency training. 19 of 24 residents (79 %) completed a baseline aMBI, and 17 of 20 residents (85 %) who attended the most recent session completed the 6-month follow-up, showing a non-significant 1-point improvement in all subsets of the aMBI. Conclusions This novel, low-cost, easily implemented curriculum addressed resiliency and burn-out in an Internal Medicine Residency. It was extremely well received and can easily be expanded to other training programs or to providers outside of training.


Author(s):  
Thais Pousada García ◽  
Jessica Garabal-Barbeira ◽  
Patricia Porto Trillo ◽  
Olalla Vilar Figueira ◽  
Cristina Novo Díaz ◽  
...  

Background: Assistive Technology (AT) refers to “assistive products and related systems and services developed for people to maintain or improve functioning and thereby to promote well-being”. Improving the process of design and creation of assistive products is an important step towards strengthening AT provision. Purpose: (1) to present a framework for designing and creating Low-Cost AT; (2) to display the preliminary results and evidence derived from applying the framework. Methodology: First, an evidence-based process was applied to develop and conceptualize the framework. Then, a pilot project to validate the framework was carried out. The sample was formed by 11 people with disabilities. The measure instruments were specific questionnaire, several forms of the Matching Person-Technology model, the Psychosocial Impact of Assistive Device Scale, and a tool to assess the usability and universal design of AT. Results: The framework integrates three phases: Identification (Design), Creation (Making the prototype), and Implementation (Outcome Measures), based on the principles of Design Thinking, and with a user-centered perspective. The preliminary results showed the coherence of the entire process and its applicability. The matching between person and device was high, representing the importance of involving the user in the design and selection of AT. Conclusions: The framework is a guide for professionals and users to apply a Low-Cost and Do-It-Yourself perspective to the provision of AT. It highlights the importance of monitoring the entire procedure and measuring the effects, by applying the outcome measures.


2000 ◽  
Vol 15 (1) ◽  
pp. 2-8 ◽  
Author(s):  
N.C. Wagner ◽  
S. Ramaswamy ◽  
U. Tschirner

AbstractA pre-economic feasibility study was undertaken to determine the potential of cereal straw for industrial utilization in Minnesota. Specifically, utilizing straw for pulp and paper manufacture was of interest. The availability of cereal straw fiber supplies at various locations across the state of Minnesota, along with pre-processing issues such as transportation, harvesting, handling, and storage, are discussed and priced. The greatest economic advantage of straw for industrial use appears to be the low cost of the raw material compared to traditional raw materials. This also provides an excellent opportunity for additional income for farmers. The methodology and information provided here should be helpful in evaluating the feasibility of utilizing straw for other industrial purposes in other parts of the world. However, in some Third World countries, long-standing on-farm, traditional uses of cereal straws for fuel, fiber, and animal feed may limit their availability for industrial utilization.


2016 ◽  
Vol 49 (6) ◽  
pp. 685-716 ◽  
Author(s):  
Jamie Anderson ◽  
Kai Ruggeri ◽  
Koen Steemers ◽  
Felicia Huppert

Empirical urban design research emphasizes the support in vitality of public space use. We examine the extent to which a public space intervention promoted liveliness and three key behaviors that enhance well-being (“connect,” “be active,” and “take notice”). The exploratory study combined directly observed behaviors with self-reported, before and after community-led physical improvements to a public space in central Manchester (the United Kingdom). Observation data ( n = 22,956) and surveys (subsample = 212) were collected over two 3-week periods. The intervention brought significant and substantial increases in liveliness of the space and well-being activities. None of these activities showed increases in a control space during the same periods. The findings demonstrate the feasibility of the research methods, and the impact of improved quality of outdoor neighborhood space on liveliness and well-being activities. The local community also played a key role in conceiving of and delivering an effective and affordable intervention. The findings have implications for researchers, policy makers, and communities alike.


RSC Advances ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 5268-5275
Author(s):  
Guiyang Qu ◽  
Ying Han ◽  
Junjun Qi ◽  
Xinyue Xing ◽  
Minjie Hou ◽  
...  

The effective and safe capture and storage of radioactive iodine (129I or 131I) are of significant importance during nuclear waste storage and nuclear energy generation.


2020 ◽  
Vol 87 (s1) ◽  
pp. s79-s84
Author(s):  
Qummar Zaman ◽  
Senan Alraho ◽  
Andreas König

AbstractThe conventional method for testing the performance of reconfigurable sensory electronics of industry 4.0 relies on the direct measurement methods. This approach gives higher accuracy but at the price of extremely high testing cost and does not utilize the new degrees of freedom for measurement methods enabled by industry 4.0. In order to reduce the test cost and use available resources more efficiently, a primary approach, called indirect measurements or alternative testing has been proposed using a non-intrusive sensor. Its basic principle consists in using the indirect measurements, in order to estimate the sensory electronics performance parameters without measuring directly. The non-intrusive property of the proposed method offers better performance of the sensing electronics and virtually applicable to any sensing electronics. Efficiency is evaluated in terms of model accuracy by using six different classical metrics. It uses an indirect current-feedback instrumentation amplifier (InAmp) as a test vehicle to evaluate the performance parameters of the circuit. The device is implemented using CMOS 0.35 μm technology. The achieved maximum value of average expected error metrics is 0.24, and the lowest value of correlation performance metrics is 0.91, which represent an excellent efficiency of InAmp performance predictor.


Sign in / Sign up

Export Citation Format

Share Document