Transmission Line Routing Using Open Source Software Q-GIS

Author(s):  
Shabbir Uddin ◽  
Karma Sonam Sherpa ◽  
Sandeep Chakravorty ◽  
Amitava Ray

This article contends that planning for power systems is essentially a projection of how the system should grow over a specific period of time, given certain assumptions and judgments about the future load and the size of investment in generating capacity additions, transmission facilities expansion and reinforcements. Transmission line routing is one of the most important strategic decision-making problems for both private and public sectors. The major objective of a utility is to supply demand for power with a good quality of service, through proper planning of the system. This has led to development of methods which can be used to aid the decision-making process for selecting the best alternative. Geographical Information System (GIS)-based electricity transmission system planning strategies are proposed in this article to determine an optimum routing of feeders. Existing and proposed layouts have been drawn using a GIS-based software, Quantum Geographic Information System (Q-GIS). The developed system is based on the routing of transmission lines from Barh thermal power plant situated in Bihar, India.

2017 ◽  
Vol 8 (4) ◽  
pp. 71-82 ◽  
Author(s):  
Shabbir Uddin ◽  
Karma Sonam Sherpa ◽  
Sandeep Chakravorty ◽  
Amitava Ray

This article contends that planning for power systems is essentially a projection of how the system should grow over a specific period of time, given certain assumptions and judgments about the future load and the size of investment in generating capacity additions, transmission facilities expansion and reinforcements. Transmission line routing is one of the most important strategic decision-making problems for both private and public sectors. The major objective of a utility is to supply demand for power with a good quality of service, through proper planning of the system. This has led to development of methods which can be used to aid the decision-making process for selecting the best alternative. Geographical Information System (GIS)-based electricity transmission system planning strategies are proposed in this article to determine an optimum routing of feeders. Existing and proposed layouts have been drawn using a GIS-based software, Quantum Geographic Information System (Q-GIS). The developed system is based on the routing of transmission lines from Barh thermal power plant situated in Bihar, India.


Author(s):  
Nguyen Viet Hung ◽  
Phan Van Hung ◽  
Be Trung Anh

Data mode “good governance” developed in the last century for process of sustainable base system, providing basic information and on-line services, supports the development, challenges and opportunities in the context of globalization and integration. In this paper I discuss a framework for the design of e-Local Governance (eLG) that integrates Information System (IS), Geographical Information System (GIS) and Atlas with focus on ethnic minorities in Vietnam. The design framework is based on various classifications such categories as sex, age, ethnic group, education background and income. The database system is built to enhance the Committee for Ethnic Minority Affairs (CEMA) capabilities in the planning and decision making process by providing the authorities with data, internet GIS, internet communication and some ecological economic models to disseminate results to the ethnic minorities. The unique feature of the CEMADATA using GIS is that it helps users not only to improve the public services and to provide information and encourage ethnic minorities to participate in decision making processes, but also to support the competency-based training for IT staff


2013 ◽  
Vol 2013 ◽  
pp. 1-6
Author(s):  
Meng-Hui Wang

Due to the complex parameters of a solar power system, the designer not only must think about the load demand but also needs to consider the price, weight, and annual power generating capacity (APGC) and maximum power of the solar system. It is an important task to find the optimal solar power system with many parameters. Therefore, this paper presents a novel decision-making method based on the extension theory; we call it extension decision-making method (EDMM). Using the EDMM can make it quick to select the optimal solar power system. The paper proposed this method not only to provide a useful estimated tool for the solar system engineers but also to supply the important reference with the installation of solar systems to the consumer.


2017 ◽  
Vol 21 (5) ◽  
pp. 1925-1935
Author(s):  
Dragan Zlatanovic ◽  
Lato Pezo ◽  
Aleksandar Sedmak ◽  
Snezana Kirin

Expression "Development conditions and perspectives" became important for numerous analyses in various industrial and social areas. Several strategic documents and studies in last two decades analysed projects with topics on perspectives of future development in Serbia. Various tools are used for development of such documents, based on recent scientific and numerical solutions, thus providing reliable assessment for strategic decision making. Almost all analyses tried to implement the theories and practical experiences through the prism of "sustainable development", which included establishment of most important sustainability parameters. Analysis and ranking presented in this paper considered the potential of the Stavalj coal deposit, near city of Sjenica in Serbia, and feasibility of construction project of new mine and thermal power plant. Basis for analysis was a hybrid assessment model which takes into account principles of sustainable development. The model incorporates quantified SWOT analysis, which applies to active underground mines in Serbia. Special attention was given to the parameters describing potential for development.


Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2126 ◽  
Author(s):  
John Morales ◽  
Eduardo Muñoz ◽  
Eduardo Orduña ◽  
Gina Idarraga-Ospina

Based on the Institute of Electrical and Electronics Engineers (IEEE) Standard C37.104-2012 Power Systems Relaying Committee report, topics related to auto-reclosing in transmission lines have been considered as an imperative benefit for electric power systems. An important issue in reclosing, when performed correctly, is identifying the fault type, i.e., permanent or temporary, which keeps the faulted transmission line in service as long as possible. In this paper, a multivariable analysis was used to classify signals as permanent and temporary faults. Thus, by using a simple convolution process among the mother functions called eigenvectors and the fault signals from a single end, a dimensionality reduction was determined. In this manner, the feature classifier based on the support vector machine was used for acceptably classifying fault types. The algorithm was tested in different fault scenarios that considered several distances along the transmission line and representation of first and second arcs simulated in the alternative transients program ATP software. Therefore, the main contribution of the analysis performed in this paper is to propose a novel algorithm to discriminate permanent and temporary faults based on the behavior of the faulted phase voltage after single-phase opening of the circuit breakers. Several simulations let the authors conclude that the proposed algorithm is effective and reliable.


1997 ◽  
Vol 1997 (1) ◽  
pp. 499-506 ◽  
Author(s):  
Alain Lamarche ◽  
Edward H. Owens

ABSTRACT An analysis of the work performed by the various teams involved in shoreline cleanup operations has been applied to the design of an approach for the integration of data collected by the SCAT process with electronic maps produced by geographical information system (GIS) technology. This has led to the implementation of a PC-based system that incorporates a database of SCAT information, a knowledge base on oil behavior and shoreline cleanup, and a GIS. The system provides support to data collection using the SCAT approach for field teams and to map-based data analysis for planners and managers. In the course of this work, a set of the maps that are considered the most useful for summarizing information about shoreline conditions was designed and evaluated. This evaluation initially involved consultation with individuals experienced in shoreline cleanup. The applicability of the map representation for decision making was further tested during spill drills. SCAT surveys generate a large volume of data that need to be captured and integrated. There is a risk that this large amount of information might overwhelm decision makers involved in the management of shoreline cleanup operations. The paper describes the various modifications that were made to the SHORECLEAN software package to provide some solutions to these problems. These include providing specialized SCAT data entry forms, automating the links between a SCAT database and a GIS, and producing map representations that provide clear, useful, and nonmisleading information for decision makers.


2013 ◽  
Vol 2013 ◽  
pp. 1-6
Author(s):  
Antonis L. Lazari ◽  
Charalambos A. Charalambous

Considering the investment volume in the electrical energy infrastructure and the increasing awareness for global warming and climate change, this paper aims to deliver an enhanced transmission line losses evaluation method that integrates true environment financial figures. The enormous volume of transmission lines utilized in power systems across the world provides a considerable potential for energy savings by adopting the idea of “energy-efficient transmission lines.” In this paper the total owning cost (TOC) formula with built-in environmental components is used to assess the relative economic benefit of a high-first-cost, low-loss transmission line unit versus one with a lower first cost and higher losses. The proposed methodology is applied on the Cyprus Power System, by incorporating true financial data and system characteristics.


Sign in / Sign up

Export Citation Format

Share Document