Perceptions and Reality: Revealing the BIM Gap Between the UK and Turkey

2013 ◽  
Vol 2 (3) ◽  
pp. 1-15 ◽  
Author(s):  
Volkan Ezcan ◽  
Jack S. Goulding ◽  
Murat Kuruoglu ◽  
Farzad Pour Rahimian
Keyword(s):  
Construction Industry ◽  
Complex Nature ◽  
Building Information Modelling ◽  
Web Based ◽  
Related Information ◽  
Building Information ◽  
The Uk ◽  
Control And Management ◽  
Intensive Control

The complex nature of the construction process needs an intensive control and management mechanism in order to manage and process information flow. Current deficiencies in managing construction related information have been highlighted by a range of industry reports, the consensus of which has reinforced the lack of performance in the construction industry. Given this, recent research on the role of Building Information Modelling (BIM) has been proffered as a potential solution for covering these deficiencies, along with improving competitive advantage. Although limited research has concentrated on measuring BIM awareness and use, findings have been somewhat parochial and non-specific. This paper addresses this gap by concentrating on two markets: Turkey and the UK. The aim of the paper is to determine the BIM gap in terms of awareness and use, in order to form a basis for the development of future adoption strategies. A web-based questionnaire was used mirror the National Building Specification (NBS) survey (previously undertaken) in order to capture data from a new context (Turkey). The descriptive analyses of the findings and a comparison of the two countries are presented. The findings identify significant differences in BIM awareness the influence of which could provide insight for both mature and emerging markets.

scholarly journals A Systematic Review of the Role of BIM in Building Sustainability Assessment Methods

2020 ◽  
Vol 10 (13) ◽  
pp. 4444 ◽  
Author(s):  
José Pedro Carvalho ◽  
Luís Bragança ◽  
Ricardo Mateus
Keyword(s):  
Systematic Review ◽  
Construction Industry ◽  
Design Process ◽  
Sustainability Assessment ◽  
The Other ◽  
Design Phase ◽  
Building Information Modelling ◽  
Current Role ◽  
Building Information

Building Information Modelling (BIM) is creating new opportunities for the Architecture, Engineering and Construction industry. One of them is the integration of the Building Sustainability Assessment (BSA) during the design process. Currently, an approach for using BIM to foster and optimise the application of BSA methods has not been clearly established yet, creating a knowledge gap on the application of BIM for sustainability assessment purposes. Thus, this paper analyses the current role of BIM to evaluate three BSA methods—LEED, BREEAM and SBTool. The current BIM applicability is assessed by performing a systematic review, where the criteria being assessed and the applied BIM software are identified. A comparison is made to determine which BSA method can currently take more advantage from BIM and to identify the number of assessed criteria from each one. Furthermore, the attractiveness of a BIM-based assessment for SBTool is analysed, facing the actual BIM scenario for LEED and BREEAM. Despite the restrictions, BIM use is increasing for sustainability purposes. Most of the analysed studies and identified software are still focused on the use of LEED for assessing sustainability during the design phase. However, BIM software capabilities can also support the assessment of the other BSA methods so that process replicability can happen. Among the most addressed criteria, the energy and material-related categories are the most eminent. Autodesk Revit is the most-used software. A BIM-based assessment for SBTool will have enough attractiveness. It can assess, at least, the same percentage of criteria as the other schemes, creating new opportunities to enhance building sustainability.

scholarly journals The Impact of Building Information Modelling (BIM) for Contractor Costing in Offsite Construction Projects in the UK

2015 ◽  
pp. 331-338
Author(s):  
Tochukwu Moses ◽  
David Heesom ◽  
David Oloke
Keyword(s):  
Construction Industry ◽  
Construction Projects ◽  
Status Quo ◽  
Building Information Modelling ◽  
Innovative Solutions ◽  
Building Information ◽  
New Construction ◽  
The Uk ◽  
Cost Implications ◽  
The Impact

It is clear that challenging economic times inspire innovative abilities and solutions in the construction industry. In particular many of these innovations focus on cost implications, saving project time, reducing or eliminating waste, increasing productivity or redefining value. There is increasing pressure in the UK construction industry for new construction innovations, technology and processes with ability to lever a significant impact relative to disrupting the existing status quo; creating solutions that promote construction efficiencies deploying means to exploiting offsite construction approaches. The increased concern and challenge globally is that as knowledge and experience grows, the offsite manufacturers and suppliers are expected to demonstrate absolute innovative solutions that will heighten the proportion of project value being delivered through the use of offsite solutions on the bases that it makes sound project and business sense. Unparalleled huge cost saving benefits to clients and end users which is more than just creating a model is yet to be realized.

scholarly journals Special issue editorial - Construction 4.0: Established and emerging digital technologies within the construction industry

2021 ◽  
Vol 26 ◽  
pp. 758-762
Author(s):  
Nashwan Dawood ◽  
Farzad Pour Rahimian
Keyword(s):  
Virtual Reality ◽  
Construction Industry ◽  
Digital Technologies ◽  
Special Issue ◽  
Building Information Modelling ◽  
Engineering Construction ◽  
Architectural Engineering ◽  
Digital Twins ◽  
Building Information ◽  
The Uk

This special issue of ITCON brought together ten papers on Construction 4.0 related topics. These papers are drawn from papers presented at the 20th International Conference on Construction Applications of Virtual Reality (CONVR 2021) held at Teesside University, Middlesbrough TS1 3JN, the UK, in October 2020. CONVR is one of the world-leading conferences in the areas of Virtual Reality, augmented reality and building information modelling. Each year, more than 100 participants from all around the globe meet to discuss and exchange the latest developments and applications of virtual technologies in the architectural, engineering, construction and operation industry (AECO). The conference is also known for having a unique blend of participants from both academia and industry. The overarching theme for CONVR2020 was "Enabling the development and implementation of Digital Twins."

scholarly journals Role of Building Information Modelling (BIM) in Sub-Contractor Management

2021 ◽  
Vol 9 (VIII) ◽  
pp. 153-156
Author(s):  
Ankit Jain
Keyword(s):  
Supply Chain ◽  
Construction Industry ◽  
Instruction Set ◽  
Building Information Modelling ◽  
Information Modelling ◽  
Work Breakdown Structure ◽  
Building Information ◽  
Multiple Issues ◽  
Hierarchical Manner

Construction industry being an excellent example of supply chain has various key components which are interlinked and interdependent on each other. The whole chain is glued on communication among each other. Any lack in the flawlessness of this communication breaks the chain and the whole system gets affected. The work breakdown structure of this industry is structured in a hierarchical manner and works on decentralization of the authority. The most common lack of communication has been observed between the Contractor and Sub-contractors which causes multiple issues during delivery. Thus, this study has established a workflow through which BIM (Building Information Modelling) can be employed to improve communication between the Contractor and Sub-contractor of a project. This document gives formatting instructions for authors preparing papers for publication in the Proceedings of an IEEE conference. The authors must follow the instructions given in the document for the papers to be published. You can use this document as both an instruction set and as a template into which you can type your own text.

scholarly journals Introduction of BIM methodology in education: Concept and application

2018 ◽  
Author(s):  
Alcinia Zita Sampaio
Keyword(s):  
Construction Industry ◽  
Geometric Model ◽  
Advanced Technology ◽  
Construction Planning ◽  
Building Information Modelling ◽  
Information Modelling ◽  
Building Information ◽  
Concept Of Information ◽  
Education Concept

Teaching Civil Engineering and Architecture requires a permanent updating of knowledge concerning procedures and technologies used in Construction industry. In this sense, the school should seek to adapt its curriculum to include innovative issues to support a better construction. The methodology Building Information Modelling (BIM), involving the concept of information centralized in a unique geometric model and of collaboration of all participants in a project, is strongly supported in advanced technology. An important role of teaching is to organize actions to promote the insertion of new issues in school. The text presents several examples of BIM applications developed by students in the context of MSc researches. Some topics are described in detail: 4D Model for construction planning based on BIM technology; Coordination of construction project based on BIM methodology; Conflict analysis based in an architectural BIM model. The objective is to add competitive skills in the training of future architects and civil engineers.

scholarly journals THE ROLE OF DIGITIZATION IN POST-DISASTER RECONSTRUCTION

2020 ◽  
Vol XLIV-3/W1-2020 ◽  
pp. 125-130
Author(s):  
M. Rotilio ◽  
B. Tudini
Keyword(s):  
Construction Industry ◽  
Multidisciplinary Approach ◽  
New Technologies ◽  
Building Information Modelling ◽  
Advantages And Disadvantages ◽  
Common Thread ◽  
Building Information ◽  
Post Disaster ◽  
Design And Construction

Abstract. Nowadays, it is well known that digitization has tenaciously become part of the construction industry. The document is aimed at being an analysis of the state of the art, focusing on the digitization application in post-disaster reconstruction. The new technologies have influenced all the actors involved to adapt to a new designing way, but this methodology brings with itself advantages and disadvantages. This paper will try to identify, clarify and review them. In fact, it will try to explain to what extent the logic related to the design and construction of the post-disaster area may be guided by a single common thread, that consists in the Building Information Modelling (BIM) methodology use. Through this methodology it is possible to reduce time and improve costs, thanks to the possibility to optimize the design and construction processes and to carry out virtual inspections and analysis based on the information from the construction phases. In addition, the various BIM tools, that allow interoperability, guarantee a semi-automatic review of the project's compliance with regulations and interference between the different design levels (structural, architectural, plant engineering and energy). In this way, there is the chance to improve the accuracy and reliability of the validation process. The entire process is also based on a multidisciplinary approach involving all branches of engineering.

scholarly journals Building information modelling knowledge harvesting for energy efficiency in the Construction industry

2020 ◽  
Author(s):  
Andrei Hodorog ◽  
Ioan Petri ◽  
Yacine Rezgui ◽  
Jean-Laurent Hippolyte
Keyword(s):  
Energy Efficiency ◽  
Construction Industry ◽  
Correlation Factor ◽  
Information And Communications Technology ◽  
Building Information Modelling ◽  
Web Based ◽  
Information Modelling ◽  
Training Requirements ◽  
Secondary Sources ◽  
Building Information

Abstract The recent adoption of building information modelling (BIM), and the quest to decarbonise our built environment, has impacted several segments of the supply chain, including design and engineering practitioners, prompting the need to redefine the construction personnel positions along with associated skills and competencies. The research informs ways in which practitioners can fully embrace the potential of BIM for energy efficiency to promote sustainable interventions by improving existing training practices and identifying new training requirements as BIM evolves and as practitioners’ ICT (Information and Communications Technology) maturity levels improve. This is achieved by adopting a novel text-mining approach which analyses social media alongside secondary sources of evidence to establish a level of correlation between BIM roles and skills. The use of ontological dependency analysis has helped to understand the degree of correlation of skills with roles as a method to inform training and educational programmes. A key outcome from the research is a semantic web-based mining environment which determines BIM roles and skills, as well as their correlation factor, with an application for energy efficiency. The paper also evidences that (a) construction skills and roles are dynamic in nature and evolve over time, reflecting the digital transformation of the Construction industry, and (b) the importance of socio-organisational aspects in construction skills and related training provision. Graphic abstract

Benchmark Alberta’s architectural, engineering, and construction industry knowledge of building information modelling (BIM)

2017 ◽  
Vol 44 (1) ◽  
pp. 59-67 ◽  
Author(s):  
B. Abdulaal ◽  
A. Bouferguene ◽  
M. Al-Hussein
Keyword(s):  
Construction Industry ◽  
Project Delivery ◽  
Building Information Modelling ◽  
Web Based ◽  
Fully Integrated ◽  
Information Modelling ◽  
Architectural Engineering ◽  
Building Information ◽  
Points Of View ◽  
Over Time

Construction professionals agree that building information modelling (BIM) will revolutionize the architectural, engineering, and construction (AEC) industry and its impact will be felt by all project stakeholders including owners and facility managers. Statistics show that many owners and other stakeholders perceive BIM as a technology that can make project delivery more efficient because it allows project information to be fully integrated. In the future, owners are expected to demand the use of BIM to prevent over-budget and over-time project delivery. However, as we are preparing this contribution the level of implementation and use of BIM varies widely across the globe. This paper probes the state of BIM in Alberta from three points of view: (i) the current understanding and implementation, (ii) the motivations driving its use, and (iii) the challenges hindering its implementation. The findings of this paper are extracted from individual responses to a web-based survey that was proposed to professionals in the Albertan AEC/FM industries.

Sign in / Sign up

Export Citation Format

Share Document