Analysis and Optimization of Hot Air Drying Device of a Gravure Printing Machine Based on Fluid Analysis

2011 ◽  
Vol 121-126 ◽  
pp. 2517-2521 ◽  
Author(s):  
Lin Lin Liu ◽  
Jian Liu ◽  
Xiao Yan Zhang ◽  
Shan Shan Zheng
Keyword(s):  
Fluid Dynamics ◽  
Simulation Analysis ◽  
Paper Analysis ◽  
Utilization Efficiency ◽  
Gravure Printing ◽  
Analysis Model ◽  
Fluid Analysis ◽  
Hot Air ◽  
Cfd Method ◽  
Printing Machine

in this paper, analysis of the fluid dynamics was carried out on hot air in drying mechanism of a gravure printing machine by applying the fluid dynamics and aerodynamics theories. The kinematical equation and the kinetic equation were established respectively and the RNG model was added according to flowing conditions of hot air. The CFD analysis model was established by adopting the computational fluid dynamics (CFD) method to implement dynamic simulation analysis on air hot in the drying mechanism. Uniformity of drying was improved through adding clapboard and a flow guide plate to optimize the structure of air nozzles, so that the hot air convolutes for multi times on substrate and the utilization efficiency was increased.

scholarly journals Entropy Analysis of Temperature Swing Adsorption for CO2 Capture Using the Computational Fluid Dynamics (CFD) Method

Entropy ◽  
2019 ◽  
Vol 21 (3) ◽  
pp. 285
Author(s):  
Zhihao Guo ◽  
Shuai Deng ◽  
Shuangjun Li ◽  
Yahui Lian ◽  
Li Zhao ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Entropy Generation ◽  
Utilization Efficiency ◽  
Entropy Analysis ◽  
Irreversible Loss ◽  
Temperature Swing ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Method ◽  
Temperature Swing Adsorption

Carbon capture by adsorption is supposed to be an effective method to reduce CO2 emissions, among which Temperature Swing Adsorption (TSA) can utilize low-grade thermal energy even from renewable energy source. At present, TSA technology still has several challenges to be practical application, such as intensive energy-consumption and low energy-efficiency. Thermodynamics could be a powerful method to explore the energy conversion mechanism of TSA, among which entropy analysis could further provide a clear picture on the irreversible loss, even with a possible strategy of energy-efficient improvement. Based on the theory of non-equilibrium thermodynamics, the entropy analysis of TSA cycle is conducted, using the Computational Fluid Dynamics (CFD) method. The physical model and conservation equations are established and calculation methods for entropy generation are presented as well. The entropy generation of each process in cycle is analyzed, and the influence from the main parameters of desorption process is presented with optimization analysis. Finally, the performance of the cycle with regeneration is compared with that of the cycle without regeneration, and the method of reducing the entropy generation is obtained as well. This paper provides possible directions of performance improvement of TSA cycle with regards on energy utilization efficiency and the reduction of irreversible loss.

Analysis and Structure Optimization of the Wind Distribution of Nozzle in the Gravure Printing Drying System

2015 ◽  
Vol 731 ◽  
pp. 411-415
Author(s):  
Xin Zheng ◽  
Yan Fei Gao
Keyword(s):  
Simulation Analysis ◽  
Structure Optimization ◽  
Hydrodynamic Theory ◽  
Air Distribution ◽  
Gravure Printing ◽  
Heated Air ◽  
Drying System ◽  
Wind Distribution ◽  
Printing Machine ◽  
Crosswind Landing

The drying system plays an important role in printing speed and energy consumption of gravure printing machine. Nozzle is a factor which decides heated air distribution in drying system finally. This research makes a model for the structure of nozzle and takes a numerical simulation analysis of heated air field with hydrodynamic theory. The defect of structure is found through the distribution of velocity, temperature and trajectories. A crosswind landing area is added around outlet area of nozzle. In this study, it is evaluated that the distribution of the wind field. It is found that the velocity and pressure of heated air in the vortex area between substrate and nozzle by the cross-wind board can be improved from the simulation results. The study has significance on optimizing the structure of nozzle and improving efficiency of drying system.

scholarly journals Computational fluid dynamics (CFD) simulation analysis on retinal gas cover rates using computational eye models

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Makoto Gozawa ◽  
Yoshihiro Takamura ◽  
Tomoe Aoki ◽  
Kentaro Iwasaki ◽  
Masaru Inatani
Keyword(s):  
Cfd Simulation ◽  
Simulation Analysis ◽  
Fluid Dynamic ◽  
Fluid Analysis ◽  
Intraocular Gas ◽  
Pars Plana ◽  
Computational Fluid Dynamics Cfd ◽  
Multiple Breaks ◽  
Gas Volume ◽  
Wall Wettability

AbstractWe investigated the change in the retinal gas cover rates due to intraocular gas volume and positions using computational eye models and demonstrated the appropriate position after pars plana vitrectomy (PPV) with gas tamponade for rhegmatogenous retinal detachments (RRDs). Computational fluid dynamic (CFD) software was used to calculate the retinal wall wettability of a computational pseudophakic eye models using fluid analysis. The model utilized different gas volumes from 10 to 90%, in increments of 10% to the vitreous cavity in the supine, sitting, lateral, prone with closed eyes, and prone positions. Then, the gas cover rates of the retina were measured in each quadrant. When breaks are limited to the inferior retina anterior to the equator or multiple breaks are observed in two or more quadrants anterior to the equator, supine position maintained 100% gas cover rates in all breaks for the longest duration compared with other positions. When breaks are limited to either superior, nasal, or temporal retina, sitting, lower temporal, and lower nasal position were maintained at 100% gas cover rates for the longest duration, respectively. Our results may contribute to better surgical outcomes of RRDs and a reduction in the duration of the postoperative prone position.

Construction Monitoring on Steel Truss Bridge’s Maintenance and Reinforcement

2018 ◽  
Vol 878 ◽  
pp. 89-94 ◽  
Author(s):  
Er Lei Wang
Keyword(s):  
Simulation Analysis ◽  
Analysis Model ◽  
Element Analysis ◽  
Construction Monitoring ◽  
Finite Element Analysis Model ◽  
Bridge Steel ◽  
Steel Truss ◽  
Stress And Deformation ◽  
Site Test

Implementing monitoring over construction process of old bridge’s reinforcement serves as an important measure to ensure construction quality and safety and realize the goal of reinforcement. This paper, with a case study of the maintenance and reinforcement project of Zhicheng Yangtze River Bridge (steel truss highway-railway combined bridge), adopted MIDAS to establish finite element analysis model, and with stress and deformation as monitoring parameters, completed the construction monitoring work, numerical simulation analysis and site test for the reinforcement project.

Analysis on Additional Pressure of Tube Sidewall of Immersed Tube Tunnel in Sinking Process of Tube Segment

2013 ◽  
Vol 387 ◽  
pp. 180-184
Author(s):  
Ya Dong Li ◽  
Hai Hong Mo ◽  
Jun Shen Chen
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Simulation Analysis ◽  
Lateral Wall ◽  
Special Position ◽  
Additional Pressure ◽  
Whole Process ◽  
Pressure Changes ◽  
Dynamics Method ◽  
Tube Segment

The numerical simulation analysis on the whole process of the tube immersing is researched, which use computational fluid dynamics method, is based on RNG k~ε turbulence model. The analysis shows that: additional pressure of tube lateral wall depends on the changed flow field cause by tube immersing; through the analysis, it have explored the special position of additional pressure changes in the process of immersing; it also shows some problems should be paid attention, through analysis the stress of special position.

scholarly journals Validasi Model Turbulensi pada Simulasi Numerik Menggunakan Software Fluent dengan Sayap Onera M6

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Sulistiya Sulistiya ◽  
Alief Sadlie Kasman
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Computational Result ◽  
Computational Simulation ◽  
Turbulence Models ◽  
Wind Tunnels ◽  
Direct Testing ◽  
The World ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Method

AbstractNumerical simulation using Computational Fluid Dynamics (CFD) method is one way of predicting airflow characteristics on the model. This method is widely used because it is relatively inexpensive and faster in getting desired results compared with performing direct testing. The correctness of a computational simulation output is highly dependent on the input and how it was processed. In this paper, simulation is done on Onera M6 Wing, to investigate the effect of a turbulence model’s application on the accuracy of the computational result. The choice of Onera M6 Wing as a simulation’s model is due to its extensive database of testing results from various wind tunnels in the world. Among Turbulence models used are Spalart-Allmaras, K-Epsilon, K-Omega, and SST.Keywords: CFD, fluent, Model, Turbulence, Onera M6, Spalart-Allmaras, K-Epsilon, K-Omega, SST.AbstraksSimulasi numerik dengan menggunakan metode Computational Fluid Dynamics (CFD) merupakan salah satu cara untuk memprediksi karakteristik suatu aliran udara yang terjadi pada model. Metode ini banyak digunakan karena sifatnya yang relatif murah dan cepat untuk mendapatkan hasil dibandingkan dengan melakukan pengujian langsung. Benar tidak hasil sebuah simulasi komputasi sangat tergantung pada inputan yang diberikan serta cara memproses data inputan tersebut. Pada tulisan ini dilakukan simulasi dengan menggunakan sayap onera M6 dengan tujuan untuk mengetahui pengaruh penggunaan model turbulensi terhadap keakuratan hasil komputasi. Pilihan sayap onera M6 sebagai model simulasi dikarenakan model tersebut sudah memiliki database hasil pengujian yang cukup lengkap dan sudah divalidasi dari berbagai terowongan angin di dunia. Model turbulensi yang digunakan diantaranya Spalart-Allmaras, K-Epsilon, K-Omega dan SST.Kata Kunci : CFD, fluent, Model, Turbulensi, Onera M6, Spalart-Allmaras, K-Epsilon, K-Omega, SST.

scholarly journals Computational Fluid Dynamics Model of Wells Turbine for Oscillating Water Column System: A Review

2021 ◽  
Vol 2053 (1) ◽  
pp. 012013
Author(s):  
N. Abdul Settar ◽  
S. Sarip ◽  
H.M. Kaidi
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Water Column ◽  
Cfd Simulation ◽  
Oscillating Water Column ◽  
Wells Turbine ◽  
Flow Problems ◽  
Cfd Models ◽  
Column System ◽  
Cfd Method

Abstract Wells turbine is an important component in the oscillating water column (OWC) system. Thus, many researchers tend to improve the performance via experiment or computational fluid dynamics (CFD) simulation, which is cheaper. As the CFD method becomes more popular, the lack of evidence to support the parameters used during the CFD simulation becomes a big issue. This paper aims to review the CFD models applied to the Wells turbine for the OWC system. Journal papers from the past ten years were summarized in brief critique. As a summary, the FLUENT and CFX software are mostly used to simulate the Wells turbine flow problems while SST k-ω turbulence model is the widely used model. A grid independence test is essential when doing CFD simulation. In conclusion, this review paper can show the research gap for CFD simulation and can reduce the time in selecting suitable parameters when involving simulation in the Wells turbine.

Sign in / Sign up

Export Citation Format

Share Document