Biocompatabiltiy of Chitosan/Poly(L-Lactic Acid) Composite Scaffolds with Three-Dimensional Honeycomb Patterned Structure

2011 ◽  
Vol 140 ◽  
pp. 29-33
Author(s):  
Ming Yan Zhao ◽  
Li Hua Li ◽  
Guo Dong Sun ◽  
Chang Ren Zhou
Keyword(s):  
Mechanical Property ◽  
Tissue Engineering ◽  
Lactic Acid ◽  
Three Dimensional ◽  
Tissue Engineering Scaffold ◽  
Good Mechanical Property ◽  
Composite Scaffolds ◽  
Ideal Candidate

Three dimensional (3D) scaffolds provide the necessary support for cells to attach, proliferate and differentiate, and define the overall shape of the tissue engineered transplant. In this study, 3D honeycomb patterned chitosan/poly (L-lactic acid) composite scaffolds fabricated by an easy manipulated technique with good mechanical property and cytocompatability, as demonstrated by a previous study. Here we investigated further the in vitro cytocompatibility and spine regeneration in vivo by implanting the construct into male white rabbits for 4 and 8weeks. Results showed that such a honeycomb patterned scaffolds have a good cytocompatibilty. Also, the rabbit spinal defect was perfectly restored. These findings supported that such a 3D honeycomb patterned scaffold is an ideal candidate for the tissue engineering scaffold.

Biocompatibility and biodegradation properties of polycaprolactone/polydioxanone composite scaffolds prepared by blend or co-electrospinning

2019 ◽  
Vol 34 (2) ◽  
pp. 115-130 ◽  
Author(s):  
Xin Zhou ◽  
Yiwa Pan ◽  
Ruihua Liu ◽  
Xin Luo ◽  
Xianyan Zeng ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Mechanical Strength ◽  
Structural Characteristics ◽  
Tissue Engineering Scaffold ◽  
Morphological Properties ◽  
Composite Scaffolds ◽  
Electrospun Scaffolds ◽  
Hybrid Scaffolds

Electrospun polymer scaffolds are regarded as an ideal tissue engineering scaffold due to similar morphological properties with the native extracellular matrix. Among these, polycaprolactone is widely used to fabricate electrospun fibrous scaffolds due to its excellent biocompatibility, good mechanical properties, and ease of manufacture. However, its low biodegradation rate has a negative influence on its application in tissue engineering scaffold. To address this issue, this study prepared hybrid scaffolds composed of polycaprolactone and polydioxanone (a fast-degrading polyether-ester) via either the blend or co-electrospinning. Subsequently, the structural characteristics, mechanical strength, in vitro/vivo degradation, cellularization, and vascularization of two kinds of hybrid scaffolds were evaluated to decide which method is more suitable for producing tissue engineering scaffolds. The incorporation of polydioxanone increased the mechanical strength of both composite scaffolds. Moreover, co-electrospun scaffolds exhibited improved hydrophilicity compared to blend scaffolds. The results of in vitro and in vivo degradation studies showed that the degradation rate of both composite scaffolds was faster than that of neat polycaprolactone scaffolds due to the incorporated polydioxanone component. Especially in co-electrospun scaffolds, the fast degradation of polydioxanone fiber gave rise to larger pore size, thus leading to faster cellularization and better vascularization compared to blend scaffolds. Therefore, co-electrospinning was demonstrated to be superior to blend electrospinning for the preparation of composite scaffolds. Co-electrospun polycaprolactone–polydioxanone scaffolds may be promising candidates for tissue engineering.

scholarly journals Three-dimensionally printed polycaprolactone/multicomponent bioactive glass scaffolds for potential application in bone tissue engineering

2020 ◽  
Vol 6 (1) ◽  
pp. 57-69
Author(s):  
Amirhosein Fathi ◽  
Farzad Kermani ◽  
Aliasghar Behnamghader ◽  
Sara Banijamali ◽  
Masoud Mozafari ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Composite Scaffolds ◽  
3D Printed ◽  
Co Doped

AbstractOver the last years, three-dimensional (3D) printing has been successfully applied to produce suitable substitutes for treating bone defects. In this work, 3D printed composite scaffolds of polycaprolactone (PCL) and strontium (Sr)- and cobalt (Co)-doped multi-component melt-derived bioactive glasses (BGs) were prepared for bone tissue engineering strategies. For this purpose, 30% of as-prepared BG particles (size <38 μm) were incorporated into PCL, and then the obtained composite mix was introduced into a 3D printing machine to fabricate layer-by-layer porous structures with the size of 12 × 12 × 2 mm3.The scaffolds were fully characterized through a series of physico-chemical and biological assays. Adding the BGs to PCL led to an improvement in the compressive strength of the fabricated scaffolds and increased their hydrophilicity. Furthermore, the PCL/BG scaffolds showed apatite-forming ability (i.e., bioactivity behavior) after being immersed in simulated body fluid (SBF). The in vitro cellular examinations revealed the cytocompatibility of the scaffolds and confirmed them as suitable substrates for the adhesion and proliferation of MG-63 osteosarcoma cells. In conclusion, 3D printed composite scaffolds made of PCL and Sr- and Co-doped BGs might be potentially-beneficial bone replacements, and the achieved results motivate further research on these materials.

Tough Double-Network Hydrogels as Scaffolds for Tissue Engineering

2012 ◽  
pp. 213-222
Author(s):  
Jing Jing Yang ◽  
Jian Fang Liu ◽  
Takayuki Kurokawa ◽  
Nobuto Kitamura ◽  
Kazunori Yasuda ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Three Dimensional ◽  
Cartilage Regeneration ◽  
Cell Types ◽  
Embryoid Bodies ◽  
Living Tissue ◽  
Double Network ◽  
Dimensional Network

Hydrogels are used as scaffolds for tissue engineering in vitro & in vivo because their three-dimensional network structure and viscoelasticity are similar to those of the macromolecular-based extracellular matrix (ECM) in living tissue. Especially, the synthetic hydrogels with controllable and reproducible properties were used as scaffolds to study the behaviors of cells in vitro and implanted test in vivo. In this review, two different structurally designed hydrogels, single-network (SN) hydrogels and double-network (DN) hydrogels, were used as scaffolds. The behavior of two cell types, anchorage-dependent cells and anchorage-independent cells, and the differentiation behaviors of embryoid bodies (EBs) were investigated on these hydrogels. Furthermore, the behavior of chondrocytes on DN hydrogels in vitro and the spontaneous cartilage regeneration induced by DN hydrogels in vivo was examined.

scholarly journals Tissue-engineered Oral Mucosa

2012 ◽  
Vol 91 (7) ◽  
pp. 642-650 ◽  
Author(s):  
K. Moharamzadeh ◽  
H. Colley ◽  
C. Murdoch ◽  
V. Hearnden ◽  
W.L. Chai ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Soft Tissue ◽  
Oral Mucosa ◽  
Dental Materials ◽  
Three Dimensional ◽  
Bacterial Invasion ◽  
Graft Material ◽  
Oral Diseases

Advances in tissue engineering have permitted the three-dimensional (3D) reconstruction of human oral mucosa for various in vivo and in vitro applications. Tissue-engineered oral mucosa have been further optimized in recent years for clinical applications as a suitable graft material for intra-oral and extra-oral repair and treatment of soft-tissue defects. Novel 3D in vitro models of oral diseases such as cancer, Candida, and bacterial invasion have been developed as alternatives to animal models for investigation of disease phenomena, their progression, and treatment, including evaluation of drug delivery systems. The introduction of 3D oral mucosal reconstructs has had a significant impact on the approaches to biocompatibility evaluation of dental materials and oral healthcare products as well as the study of implant-soft tissue interfaces. This review article discusses the recent advances in tissue engineering and applications of tissue-engineered human oral mucosa.

Comparison on the Osteogenesis Potential between Poly(lactide-Co-Glycolide) and Alginate as Bone Tissue Engineering Scaffold In Vivo

2007 ◽  
Vol 330-332 ◽  
pp. 1173-1176 ◽  
Author(s):  
Cai Li ◽  
Run Liang Chen ◽  
Lei Liu ◽  
Yun Feng Lin ◽  
Wei Dong Tian ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Stromal Cells ◽  
Bone Marrow Stromal Cells ◽  
Three Dimensional ◽  
Tissue Engineering Scaffold ◽  
Autogenous Bone ◽  
Mechanical Characters

Poly(lactide-co-glycolide) (PLGA) and alginate(AG) are the most promising scaffolds in the bone tissue engineering for their stable mechanical characters and three-dimensional porous structure. This study aimed to assay the in vivo osteogenesis potentials by loading the autogenous bone marrow stromal cells (BMSCs) on PLGA or AG. The results suggested that PLGA and AG are both ideal bone tissue engineering scaffold. BMSCs/AG has stronger osteogenesis potentials in vivo than BMSCs/PLGA.

Requirements for the Manufacturing of Scaffold Biomaterial With Features at Multiple Scales

2005 ◽  
Author(s):  
I. M. Sebastine ◽  
D. J. Williams
Keyword(s):  
Tissue Engineering ◽  
Multiple Scales ◽  
Cell Attachment ◽  
Structural Parameters ◽  
Complex Function ◽  
Three Dimensional ◽  
Cell Orientation ◽  
Length Scales

Tissue engineering aims to restore the complex function of diseased tissue using cells and scaffold materials. Tissue engineering scaffolds are three-dimensional (3D) structures that assist in the tissue engineering process by providing a site for cells to attach, proliferate, differentiate and secrete an extra-cellular matrix, eventually leading cells to form a neo-tissue of predetermined, three-dimensional shape and size. For a scaffold to function effectively, it must possess the optimum structural parameters conducive to the cellular activities that lead to tissue formation; these include cell penetration and migration into the scaffold, cell attachment onto the scaffold substrate, cell spreading and proliferation and cell orientation. In vivo, cells are organized in functional tissue units that repeat on the order of 100 μm. Fine scaffold features have been shown to provide control over attachment, migration and differentiation of cells. In order to design such 3D featured constructs effectively understanding the biological response of cells across length scales from nanometer to millimeter range is crucial. Scaffold biomaterials may need to be tailored at three different length scales: nanostructure (&lt;1μm), microstructure (&lt;20–100μm), and macrostructure (&gt;100μm) to produce biocompatible and biofunctional scaffolds that closely resemble the extracellular matrix (ECM) of the natural tissue environment and promote cell adhesion, attachment, spreading, orientation, rate of movement, and activation. Identification of suitable fabrication techniques for manufacturing scaffolds with the required features at multiple scales is a significant challenge. This review highlights the effect and importance of the features of scaffolds that can influence the behaviour of cells/tissue at different length scales in vitro to increase our understanding of the requirements for the manufacture of functional 3D tissue constructs.

Sign in / Sign up

Export Citation Format

Share Document