Numerical Simulation of Ligament Force in Pitching Motion

2012 ◽  
Vol 170-173 ◽  
pp. 3292-3295
Author(s):  
Bin Li
Keyword(s):  
Numerical Simulation ◽  
Knee Joint ◽  
Muscle Contraction ◽  
The Body ◽  
Basketball Player ◽  
Pitching Motion ◽  
Knee Ligaments

The knee joint is a vulnerable joint that is easily injured. This is due in part to the fact that the joint is in the middle of two long lever-arms, the femur and the tibia. This makes the knee ligaments prone to injury from any strong contact to the knee, or sometimes even from just the force of the body moving through space with a hard muscle contraction. Simulation of ligament force in pitching motion of basketball player is studied in this paper.

Tail shapes lead to different propulsive mechanisms in the body/caudal fin undulation of fish

2020 ◽  
pp. 095440622096768
Author(s):  
Jialei Song ◽  
Yong Zhong ◽  
Ruxu Du ◽  
Ling Yin ◽  
Yang Ding
Keyword(s):  
Numerical Simulation ◽  
Aspect Ratio ◽  
High Efficiency ◽  
The Body ◽  
Caudal Fin ◽  
Fish Model ◽  
Swimming Efficiency ◽  
Simulation Results ◽  
Propulsive Mechanism ◽  
High Depth

In this paper, we investigate the hydrodynamics of swimmers with three caudal fins: a round one corresponding to snakehead fish ( Channidae), an indented one corresponding to saithe ( Pollachius virens), and a lunate one corresponding to tuna ( Thunnus thynnus). A direct numerical simulation (DNS) approach with a self-propelled fish model was adopted. The simulation results show that the caudal fin transitions from a pushing/suction combined propulsive mechanism to a suction-dominated propulsive mechanism with increasing aspect ratio ( AR). Interestingly, different from a previous finding that suction-based propulsion leads to high efficiency in animal swimming, this study shows that the utilization of suction-based propulsion by a high- AR caudal fin reduces swimming efficiency. Therefore, the suction-based propulsive mechanism does not necessarily lead to high efficiency, while other factors might play a role. Further analysis shows that the large lateral momentum transferred to the flow due to the high depth of the high- AR caudal fin leads to the lowest efficiency despite the most significant suction.

BIOMECHANICAL ANALYSIS OF THE STANDING LONG JUMP

2003 ◽  
Vol 15 (05) ◽  
pp. 186-192 ◽  
Author(s):  
WEN-LAN WU ◽  
JIA-HROUNG WU ◽  
HWAI-TING LIN ◽  
GWO-JAW WANG
Keyword(s):  
Knee Joint ◽  
Motion Analysis ◽  
Joint Angle ◽  
Three Dimensional ◽  
The Body ◽  
Initial Angle ◽  
Knee Joint Angle ◽  
Standing Long Jump ◽  
Long Jump ◽  
Arm Motion

The purposes of the present study were to (1) investigate the effects of the arm movement and initial knee joint angle employed in standing long jump by the ground reaction force analysis and three-dimensional motion analysis; and (2) investigate how the jump performance of the female gender related to the body configuration. Thirty-four healthy adult females performed standing long jump on a force platform with full effort. Body segment and joint angles were analyzed by three-dimensional motion analysis system. Using kinetic and kinematic data, the trajectories on mass center of body, knee joint angle, magnitude of peak takeoff force, and impulse generation in preparing phase were calculated. Average standing long jump performances with free arm motion were +1.5 times above performance with restricted arm motion in both knee initial angles. The performances with knee 90° initial flexion were +1.2 times above performance with knee 45° initial flexion in free and restricted arm motions. Judging by trajectories of the center mass of body (COM), free arm motion improves jump distance by anterior displacement of the COM in starting position. The takeoff velocity with 90° knee initial angle was as much as 11% higher than in with 45° knee initial angle. However, the takeoff angles on the COM trajectory showed no significant differences between each other. It was found that starting jump from 90° bend knee relatively extended the time that the force is applied by the leg muscles. To compare the body configurations and the jumping scores, there were no significant correlations between jump scores and anthropometry data. The greater muscle mass or longer leg did not correlated well with the superior jumping performance.

Numerical modelling of swirling momentumless turbulent wake dynamics

2018 ◽  
pp. 37-48
Author(s):  
Андрей Геннадьевич Деменков ◽  
Геннадий Георгиевич Черных
Keyword(s):  
Numerical Simulation ◽  
Mathematical Model ◽  
Mathematical Models ◽  
Equations Of Motion ◽  
Turbulent Wake ◽  
The Body ◽  
Jet Flows ◽  
Reynolds Stresses ◽  
Bodies Of Revolution ◽  
Averaged Equations

С применением математической модели, включающей осредненные уравнения движения и дифференциальные уравнения переноса нормальных рейнольдсовых напряжений и скорости диссипации, выполнено численное моделирование эволюции безымпульсного закрученного турбулентного следа с ненулевым моментом количества движения за телом вращения. Получено, что начиная с расстояний порядка 1000 диаметров от тела течение становится автомодельным. На основе анализа результатов численных экспериментов построены упрощенные математические модели дальнего следа. Swirling turbulent jet flows are of interest in connection with the design and development of various energy and chemical-technological devices as well as both study of flow around bodies and solving problems of environmental hydrodynamics, etc. An interesting example of such a flow is a swirling turbulent wake behind bodies of revolution. Analysis of the known works on the numerical simulation of swirling turbulent wakes behind bodies of revolution indicates lack of knowledge on the dynamics of the momentumless swirling turbulent wake. A special case of the motion of a body with a propulsor whose thrust compensates the swirl is studied, but there is a nonzero integral swirl in the flow. In previous works with the participation of the authors, a numerical simulation of the initial stage of the evolution of a swirling momentumless turbulent wake based on a hierarchy of second-order mathematical models was performed. It is shown that a satisfactory agreement of the results of calculations with the available experimental data is possible only with the use of a mathematical model that includes the averaged equations of motion and differential equations for the transfer of normal Reynolds stresses along the rate of dissipation. In the present work, based on the above mentioned mathematical model, a numerical simulation of the evolution of a far momentumless swirling turbulent wake with a nonzero angular momentum behind the body of revolution is performed. It is shown that starting from distances of the order of 1000 diameters from the body the flow becomes self-similar. Based on the analysis of the results of numerical experiments, simplified mathematical models of the far wake are constructed. The authors dedicate this work to the blessed memory of Vladimir Alekseevich Kostomakha.

A New Method to Concentrate Electromagnetic Field Within ROI Using a High Dielectric Material in 3T Body MRI

2013 ◽  
Author(s):  
Bu S. Park ◽  
Sunder S. Rajan ◽  
Leonardo M. Angelone
Keyword(s):  
Numerical Simulation ◽  
Electromagnetic Field ◽  
Human Body ◽  
Region Of Interest ◽  
Dielectric Materials ◽  
The Body ◽  
Human Body Model ◽  
Body Model ◽  
Simulation Results ◽  
High Dielectric

We present numerical simulation results showing that high dielectric materials (HDMs) when placed between the human body model and the body coil significantly alter the electromagnetic field inside the body. The numerical simulation results show that the electromagnetic field (E, B, and SAR) within a region of interest (ROI) is concentrated (increased). In addition, the average electromagnetic fields decreased significantly outside the region of interest. The calculation results using a human body model and HDM of Barium Strontium Titanate (BST) show that the mean local SAR was decreased by about 56% (i.e., 18.7 vs. 8.2 W/kg) within the body model.

Stability Enhancement of Supercavitating Projectiles by Unsteady Air Injection

2005 ◽  
Author(s):  
Yasmin Khakpour ◽  
Miad Yazdani
Keyword(s):  
Numerical Simulation ◽  
Drag Reduction ◽  
High Speed ◽  
The Body ◽  
Air Injection ◽  
Cavity Surface ◽  
The Stability ◽  
Stability Enhancement

In this work, numerical simulation is used to study the stability enhancement of high speed supercavitating hydrofoils. Although supercavitation is known as one of the most effective methods for drag reduction, producing the cavity, either by ventilation or by cavitator at front of the body, may cause some instabilities on cavity surface and thus on the projectile’s motion. Therefore removing these instabilities comes as an important point of discussion. First of all, we calculate the sources of instabilities and measure respective forces and then present some approaches that significantly reduce these instabilities. One of these methods that could produce more stable supercavities is injecting of the air into the cavity unsteadily which varies through the projectile’s surface. This approach is provided by arrays of slots distributed on the projectile’s surface and unsteady injection is modeled over the surface. Furthermore, the position of ventilation, dramatically affects the stability like those in aerodynamics. In all approaches it is assumed that the supercavity covers the whole of the body, however the forces caused by the wakes, formed behind the body are taken into account. The calculation is performed at three cavitation numbers with respective velocities of 40 m/s, 50 m/s, 60 m/s.

Numerical simulation of temperature variations in a canine knee joint during therapeutic heating

2018 ◽  
Vol 40 (10) ◽  
Author(s):  
Fernanda Souza da Silva ◽  
Matheus Oliveira Castro ◽  
Lucas Lanza Bernardes ◽  
Angélica Rodrigues de Araújo ◽  
Rudolf Huebner
Keyword(s):  
Numerical Simulation ◽  
Knee Joint ◽  
Temperature Variations

A Semi-Discrete Approach for the Numerical Simulation of Freestanding Blocks

2016 ◽  
pp. 416-439
Author(s):  
Fernando Peña
Keyword(s):  
Differential Equation ◽  
Numerical Simulation ◽  
Numerical Modeling ◽  
Discrete Model ◽  
Mathematical Formulation ◽  
Equation Of Motion ◽  
Rigid Bodies ◽  
The Body ◽  
Discrete Approach ◽  
Rocking Motion

This chapter addresses the numerical modeling of freestanding rigid blocks by means of a semi-discrete approach. The pure rocking motion of single rigid bodies can be easily studied with the differential equation of motion, which can be solved by numerical integration or by linearization. However, when we deal with sliding and jumping motion of rigid bodies, the mathematical formulation becomes quite complex. In order to overcome this complexity, a Semi-Discrete Model (SMD) is proposed for the study of rocking motion of rigid bodies, in which the rigid body is considered as a mass element supported by springs and dashpots, in the spirit of deformable contacts between rigid blocks. The SMD can detect separation and sliding of the body; however, initial base contacts do not change, keeping a relative continuity between the body and its base. Extensive numerical simulations have been carried out in order to validate the proposed approach.

scholarly journals Physiological Gait versus Gait in VR on Multidirectional Treadmill—Comparative Analysis

Medicina ◽  
2019 ◽  
Vol 55 (9) ◽  
pp. 517 ◽  
Author(s):  
Katarzyna Jochymczyk-Woźniak ◽  
Katarzyna Nowakowska ◽  
Jacek Polechoński ◽  
Sandra Sładczyk ◽  
Robert Michnik
Keyword(s):  
Comparative Analysis ◽  
Knee Joint ◽  
Hip Joint ◽  
Pelvic Tilt ◽  
Plantar Flexion ◽  
Center Of Mass ◽  
The Body ◽  
Joint Rotation ◽  
Active Motion ◽  
Flexion Extension

Background and objectives: Virtual reality (VR) is increasingly often finding applications in physiotherapy and health promotion. Recent years have seen the use of advanced technologies in the promotion of physical activity (PA) in society. New simulators, e.g., treadmills, enable the performance of PA (e.g., locomotive movements) in VR (artificially created virtual world). The question of how such movements are similar to natural forms of human locomotion (march, run) inspired the comparative analysis of physiological gait and gait in VR on a multidirectional Omni treadmill. Materials and Methods: The tests involved the use of the BTS Smart system for the triplanar analysis of motion. The test involved 10 healthy females aged 20–24 (weight: 52 ± 3.1 kg, height 162 ± 5.4 cm). Measurements were performed at two stages. The first stage involved the standard assessment of physiological gait, whereas the second was focused on gait forced by the Omni treadmill. The following gait parameters were analyzed: Flexion-extension in the ankle, knee joint and hip joint, rotation in the hip joint and knee joint, foot progression, adduction-abduction in the knee joint and hip joint, pelvic obliquity, pelvic tilt, pelvic rotation as well as energy expenditure and the movement of the body center of mass. Results: The analysis of the test results revealed the existence of differences in the kinematics of physical gait and gait on the treadmill. The greatest differences were recorded in relation to the dorsal-plantar flexion in the ankle, the foot progression, the rotation of the knee joint, pelvic tilt and rotation. In addition, the gait on the treadmill is characterized by the longer duration of the stance phase and reduced ranges of the following movements: Flexion-extension in the ankle, knee joint and hip joint, adduction-abduction in the hip joint as well as rotation in the ankle and hip joint. The values of potential, kinetic and total energy recorded in relation to forced gait are significantly lower than those of physiological gait. Conclusions: Because of the fact that the parameters of gait on the Omni platform vary significantly from the parameters of physical gait, the application of the Omni treadmill in the re-education of gait during rehabilitation should be treated with considerable care. Nonetheless, the treadmill has adequate potential to become a safe simulator enabling active motion in VR using locomotive movements.

scholarly journals Phosphorus Concentration in Knee Joint Structures of Patients Following Replacement Surgery

2019 ◽  
Vol 16 (4) ◽  
pp. 525 ◽  
Author(s):  
Ciosek Żaneta ◽  
Kosik-Bogacka Danuta ◽  
Łanocha-Arendarczyk Natalia ◽  
Kot Karolina ◽  
Karaczun Maciej ◽  
...  
Keyword(s):  
Knee Joint ◽  
Cruciate Ligament ◽  
The Body ◽  
Infrapatellar Fat Pad ◽  
Emission Spectrometry ◽  
Phosphorus Concentration ◽  
Spongy Bone ◽  
Fat Pad ◽  
Hoffa’S Fat Pad ◽  
P Concentration

The aim of the study was to assess phosphorus (P) concentration in structures of the knee joint—including the tibial spongy bone, articular cartilage, meniscus, anterior cruciate ligament, and infrapatellar fat pad (Hoffa’s fat pad)—of patients following knee joint replacement. The study also aimed to assess the influence of selected biological and environmental factors on P concentration in studied parts of the knee joint. Phosphorus concentration was determined using inductively coupled plasma-atomic emission spectrometry (ICP-AES). Statistically significant differences in P concentration were found between different elements of the knee joint. The highest P concentration was measured in the spongy bone (72,746.68 mg kg−1 dw) and the lowest in the Hoffa’s fat pad (1203.19 mg kg−1 dw). P levels were unaffected by gender, age, BMI, place of residence, smoking, or alcohol consumption. Data on P concentration in the osteoarticular elements of the knee may be useful in the interpretation and evaluation of biochemical, morphological, and mechanical changes occurring in the body.

A Review of Current Management of Knee Hemarthrosis in the Non-Hemophilic Population

Cartilage ◽  
2020 ◽  
pp. 194760352094293
Author(s):  
Nikhil Potpally ◽  
Scott Rodeo ◽  
Paul So ◽  
Ken Mautner ◽  
Michael Baria ◽  
...  
Keyword(s):  
Knee Joint ◽  
The Body ◽  
Breakdown Product ◽  
Acute Management ◽  
Optimal Management ◽  
Current Management ◽  
Joint Injury ◽  
Joint Aspiration ◽  
Knee Joint Injury ◽  
Harmful Effects

The knee joint is one of the most frequently injured joints in the body, and the resulting injury may often lead to the presence of a bloody effusion, or hemarthrosis. The acute management of this condition can have long-lasting implications, and may ultimately result in the early onset of osteoarthritis in this population. Heme, a breakdown product of erythrocytes, and associated pro-inflammatory mediators, are known to have deleterious interactions with cartilage and synovium. The presence of blood in a joint following injury can precipitate these effects and accelerate the degenerative changes in the joint. Currently, there is no consensus on the optimal management of a traumatic knee joint injury with a hemarthrosis. Nontraumatic hemarthosis, seen most commonly in hemophilia patients, has a set of established guidelines that does not routinely recommend drainage of the joint. This article presents a rationale for joint aspiration to minimize the harmful effects of blood following traumatic hemarthrosis.

Sign in / Sign up

Export Citation Format

Share Document