Design of Intelligent AC Contactor

2012 ◽  
Vol 198-199 ◽  
pp. 1179-1183
Author(s):  
Xiao Bin Li
Keyword(s):  
Energy Saving ◽  
Failure Rate ◽  
Fault Location ◽  
Low Cost ◽  
High Energy ◽  
Comprehensive System ◽  
Accurate Indication ◽  
On Line ◽  
Energy Consuming ◽  
And Control

Aiming at the problem of high energy consuming and failure rate on traditional AC contactor, the implement method of intelligent AC contactor is presented. The smart structures concept is introduced into the domain of AC contactor and the microcontroller C8051F040 is used as the control core. The intelligent AC contactor is a comprehensive system which assembles data acquisition and control, fault self-diagnosis and protection Function, etc. DC operation and on-line monitoring of the running state is also realized. Experiments show that the system has characteristics of low cost , accurate indication for running state and fault location, good protecting function, completely eliminating the noise and vibration operation, good performance in energy-saving , etc.

Research on the Energy Saving Potential of Official Cars in China

2011 ◽  
Vol 128-129 ◽  
pp. 1217-1221
Author(s):  
Quan Le Liu ◽  
Wei Chen
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Fuel Efficiency ◽  
High Energy ◽  
Maintenance Cost ◽  
Strategy Method ◽  
Energy Saving Potential ◽  
Energy Consuming

The quantity of official cars increased with the speed exceeding 20% every year which need much more energy be consumed to meet the official car needs. To investigate the energy saving potential of official cars in China, This paper introduced the strategy method with systemic viewpoint to reduce official cars energy consumption through analyzing the reason of high energy consuming of official cars. The resulted showed that only reduce the quantities and maintenance cost, and decline the displacement and using frequency can realize fuel efficiency of official cars.

scholarly journals Towards Sustainable and Environmentally Friendly Metallic Powder Production

2021 ◽  
Author(s):  
MELCHOR SALAZAR MARTINEZ ◽  
Flavio Américo Lagos-Galván
Keyword(s):  
Low Cost ◽  
Environmentally Friendly ◽  
High Energy ◽  
Human Beings ◽  
Production Methods ◽  
Manufacture Process ◽  
Very High Energy ◽  
Current Production ◽  
Energy Consuming ◽  
Powder Manufacture

Abstract Intermetallic Fe-Al compounds have become very interesting materials due to their properties, such as good corrosion resistance, high-temperature resistance, high resistance/weight ratios, creep resistance, good wear resistance, and low cost, including some applications where they could replace stainless steels. However, their low ductility at room temperature has limited their use. One of the solutions is to generate powders of these intermetallics and press them in the wished form. Current production methods of this type of powders are very high energy-consuming, polluting, and harmful for handling for human beings. Because of the environmental situation in our planet, it is necessary to develop more environmentally friendly processes, which have lower energy requirements. Therefore, a comparison of a novel water vapor-based FeAl powder manufacture process with Mechanical Alloying (MA), one of the most commonly used processes to produce this type of powder is made in this work. This comparison aims to focus on the advantages of the novel process concerning MA, the last one, considering environmental as well as energy criteria.

Development of Advanced Train Control System in Japan and its Energy Saving Effect

2012 ◽  
Vol 512-515 ◽  
pp. 1326-1332
Author(s):  
Hideo Nakamura ◽  
Jia Sun ◽  
Sei Takahashi ◽  
Masanori Yamamoto
Keyword(s):  
Control System ◽  
Energy Saving ◽  
Energy Savings ◽  
Low Cost ◽  
High Energy ◽  
Energy Reduction ◽  
Train Control ◽  
Block System ◽  
Train Control System ◽  
Saving Effect

Railways are an energy-efficient mode of transportation. Even so, efforts are being made to attain even further energy savings. The latest train-car model of the Shinkansen bullet train, while achieving enriched functionality and improved performance, has attained a 49% energy reduction compared with the 0-series Shinkansen train-cars that debuted at the start of Shinkansen's operation. Also, in the underlying train control system, technologies that will lead to energy reduction have been developed. In order to achieve further energy savings and higher-performance train control, we are developing a new train control system known as Automatic Train Protection and Block System (sometimes referred to ATP-Block system here). This new control system produces a high energy-saving effect compared with conventional signal systems based on ground equipment. We believe that realization of low-cost, highly functional energy-saving Railways will bring back users of automobiles and airlines to Railways, contributing to global energy saving and helping to prevent environmental destruction.

An Introduction to the New Kind Hydraulic Motor - Development and History

2011 ◽  
Vol 55-57 ◽  
pp. 2210-2213
Author(s):  
Hu Ran Liu
Keyword(s):  
Motor Development ◽  
High Efficiency ◽  
Low Cost ◽  
High Energy ◽  
Bevel Gear ◽  
Hydraulic Motor ◽  
New Construction ◽  
Trial Basis ◽  
Energy Consuming ◽  
The Moment

Hydraulic motor with swinging bevel gear is a new kind of hydraulic motor. There are many advantages of it over other kind hydraulic motor. The decelerating ratio is big, moment work ratio is high, energy consuming is low, and decelerating function is good. Compared with other general liquid presses motor, this type of motor has the all new construction with the function, being applicable to the low turning the soon big turning the moment specially, high- efficiency realm. A principle for studying this kind of new motor with realize technique, include go together with to flow to convert the technique, adjust soon principle with method, the wheel gear theories matches the function with many cogwheels engaged, whole machine is excellent to turn the design, the kind machine manufactures experiment etc. with function on a trial basis to.The item's research for the country inside blank, spread to move to the host simplification, economize the energy, decline the low cost having got the important meaning.

Energy Saving Drive for Forming Equipments

2010 ◽  
Vol 154-155 ◽  
pp. 701-707 ◽  
Author(s):  
You Song Sun ◽  
Jian Guo Hu ◽  
Hong Bo Zheng ◽  
Ji Ping He ◽  
Ya Fang ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
High Energy ◽  
Control Mechanisms ◽  
Basic Principles ◽  
Ac Servo ◽  
Low Efficiency ◽  
And Control ◽  
Complex Transmission ◽  
High Energy Consumption

Energy saving in manufacturing is the key to reduce energy consumption of unit GDP. Forming equipments are one of the biggest energy consumers. The basic reason of high energy consumption and low efficiency for current forming equipments is the mismatch between uncontrollable driving characteristics and the variable loads in forming processes. Complex transmission and control mechanisms are needed, wasting a lot of energy. The basic principles of driving were put forward to realize energy saving for forming equipments: faster in virtual strokes, slower in working strokes, stop when idling and recycling excessive energy. The servo driving based on large AC servo motors can make the driving and forming loads match each other well, realizing not only high automation and intelligence, but energy saving greatly as well. Theoretical analysis and experiments showed that by adopting AC servo driving the crank presses, hydraulic presses and screw presses could get the energy saving results of 25-70%.

scholarly journals Modeling the implementation of investment projects with energy-saving orientation

2019 ◽  
Vol 110 ◽  
pp. 02029
Author(s):  
Vladimir Malyuk ◽  
Galina Silkina ◽  
Aleksandr Danilov
Keyword(s):  
Energy Saving ◽  
Organizational Development ◽  
Low Cost ◽  
Production Costs ◽  
Significant Component ◽  
Investment Projects ◽  
Important Principle ◽  
Energy Consuming ◽  
Machine Systems ◽  
Practice Methods

One of the main ways to shape the competitiveness of an enterprise is to reduce production costs. A significant component of such costs are the costs of energy consumption. Therefore, the ability to control energy saving in the economic activity of the enterprise is a task of great importance. The development of energy-saving technologies, which are low-cost for this type of resource of energy-consuming machine systems, is conducted, as a rule, on a project basis, and the implementation of such projects must be carried out according to certain rules. An important principle is the need to determine the rational volumes of all types of resources attracted to the project. The solution to this problem is very difficult and time consuming. The use of economic and mathematical models of various classes can help reducing the risks and complexity of solving the problem. One of the promising types of design modeling of the development of both energy producing and energy consuming enterprises is S-modeling or modeling based on logistic dynamics. Today, undeservedly little attention is paid to this type of model. The proposed article presents methodological developments that can increase the interest in using this type of modeling in practice. Methods and models proposed in the work were tested on a really implemented project of organizational development, which increases their value.

Design of New Energy-Saving Pumping Unit Suitable for Remote Areas and Heavy Oil Recovery

2014 ◽  
Vol 926-930 ◽  
pp. 901-904
Author(s):  
Hong Guo ◽  
Shi En Liu
Keyword(s):  
Energy Saving ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Production Management ◽  
Oil And Gas ◽  
High Efficiency ◽  
Low Cost ◽  
High Energy ◽  
Remote Areas ◽  
Pumping Unit

At present, China's key oil and gas exploration and development was directed to heavy oil reservoirs and reservoirs in remote areas. As the main mechanical oil recovery equipment, pumping unit in general has some shortcomings in developing these kinds of reservoir, such as high energy consumption, short maintenance cycle, high cost of production management, and not suitable for remote area of harsh environment. In view of the deficiencies of the existing oil pumping unit, a new type of energy-saving pumping unit is designed with high efficiency and energy saving, stable and reliable, long pump inspection cycle, convenient maintenance and low-cost. It can fully meet the needs of production and maintenance for viscous oil wells and remote wells.

Research on the Furnace Fume Treatment and Control System

2012 ◽  
Vol 518-523 ◽  
pp. 2775-2779
Author(s):  
Xiao Ping Yang ◽  
Yan Ru Chen
Keyword(s):  
Control System ◽  
Control Program ◽  
Silicon Powder ◽  
High Energy ◽  
Modern World ◽  
Dust Extraction ◽  
Control Scheme ◽  
Recovery System ◽  
On Line ◽  
And Control

Silicon metal is known as a metalloid or semi-metal with several characteristics of metals. Silicon metal also has a large influence on the modern world economy. But the production of the silicon metal consumes high energy and discharges huge furnace fume. According to the technical demands of the fume cleaning and micro-silicon powder recovery system to the silicon metal furnace, this paper studies the control scheme with the structure mode of Schneider PLC and the Kingview software, develops the relevant control program and monitor program, and optimizes the control strategy through the on-line debugging. The practical application indicates that the control system is stable and reliable with the best effect of dust extraction and the longest service life to the dust settling bag.

Running state of the high energy consuming equipment and energy saving countermeasure for chinese petroleum industry in cloud computing

2016 ◽  
Vol 29 (14) ◽  
pp. e3941 ◽  
Author(s):  
Haihui Zhao ◽  
Yaoguang Qi ◽  
Hongwei Du ◽  
Ningning Wang ◽  
Guofu Zhang ◽  
...  
Keyword(s):  
Cloud Computing ◽  
Energy Saving ◽  
Petroleum Industry ◽  
High Energy ◽  
Energy Consuming

scholarly journals Research on Charging Combination Based on Batch Weight Fit Rule for Energy Saving in Forging

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Zhu Baiqing ◽  
Lu Haixing ◽  
Tong Yifei ◽  
Li Dongbo ◽  
Xia Yong
Keyword(s):  
Genetic Algorithm ◽  
Energy Consumption ◽  
Energy Saving ◽  
High Energy ◽  
Forging Process ◽  
Proposed Model ◽  
Energy Consuming ◽  
Reduce Energy Consumption ◽  
Batch Weight ◽  
Holding Temperature

As a traditional high energy-consuming industry, the forging industry consumes a lot of energy. The activity consuming the highest energy during forging process is the heating. The problem regarding how to separate workpieces with the same holding temperature and holding time and combine them for charging in forging was analyzed and a model based on batch weight fit rule for optimizing the charging combination with the goal of energy saving was proposed. A genetic algorithm was adopted to optimize and solve the model in order to reduce energy consumption in forging. In addition, an instance was given to prove the effectiveness of the proposed model.

Sign in / Sign up

Export Citation Format

Share Document