An Introduction to the New Kind Hydraulic Motor - Development and History

2011 ◽  
Vol 55-57 ◽  
pp. 2210-2213
Author(s):  
Hu Ran Liu
Keyword(s):  
Motor Development ◽  
High Efficiency ◽  
Low Cost ◽  
High Energy ◽  
Bevel Gear ◽  
Hydraulic Motor ◽  
New Construction ◽  
Trial Basis ◽  
Energy Consuming ◽  
The Moment

Hydraulic motor with swinging bevel gear is a new kind of hydraulic motor. There are many advantages of it over other kind hydraulic motor. The decelerating ratio is big, moment work ratio is high, energy consuming is low, and decelerating function is good. Compared with other general liquid presses motor, this type of motor has the all new construction with the function, being applicable to the low turning the soon big turning the moment specially, high- efficiency realm. A principle for studying this kind of new motor with realize technique, include go together with to flow to convert the technique, adjust soon principle with method, the wheel gear theories matches the function with many cogwheels engaged, whole machine is excellent to turn the design, the kind machine manufactures experiment etc. with function on a trial basis to.The item's research for the country inside blank, spread to move to the host simplification, economize the energy, decline the low cost having got the important meaning.

FOAMING AND MOISTURE CROSSLINKING OF VINYL TRIETHOXY SILANE GRAFTED ETHYLENE–PROPYLENE–DIENE TERPOLYMER

2022 ◽  
Author(s):  
Zhengwei Lin ◽  
Qinghong Zhang ◽  
Gongliang Wang ◽  
Jie Mao ◽  
Martin Hoch ◽  
...  
Keyword(s):  
High Efficiency ◽  
Low Cost ◽  
Side Reaction ◽  
High Energy ◽  
Expansion Ratio ◽  
Ethylene Propylene ◽  
Foaming Process ◽  
The Matrix ◽  
High Energy Absorption ◽  
Ethylene Propylene Diene Terpolymer

ABSTRACT Moisture crosslinking of polyolefins has attracted increasing attention because of its high efficiency, low cost, and easy processing. However, the crucial shortcoming of moisture crosslinking is that the side reaction of peroxide scorch (precrosslinking) simultaneously occurs in silane grafting. It has been recognized that making peroxide precrosslinking useful is an effective way to broaden the application of moisture crosslinking. A novel foaming process combined with moisture crosslinking is proposed. The matrix of ethylene–propylene–diene terpolymer grafted with silane vinyl triethoxysilane (EPDM-g-VTES) was prepared by melt grafting, with dicumyl peroxide as initiator. Foaming was then carried out with azodicarbonamide (AC) as the blowing agent by making use of precrosslinking. Subsequently, the EPDM-g-VTES foams were immersed in a water bath to achieve moisture crosslinking with dibutyl tin dilaurate as the catalyst. The results showed that VTES was grafted onto EPDM and the EPDM-g-VTES foams were successfully crosslinked by moisture. The EPDM-g-VTES compounds with AC obtained great cells by compression molding with the help of precrosslinking. The mechanical property of the EPDM-g-VTES foam was improved by moisture crosslinking. The moisture-cured foam with 4 wt% AC had an expansion ratio of about three times, which could bear large deformation and showed a high energy-absorption effect.

scholarly journals Promoting the Performance of Li–CO2 Batteries via Constructing Three-Dimensional Interconnected K+ Doped MnO2 Nanowires Networks

2021 ◽  
Vol 9 ◽  
Author(s):  
Zhuolin Tang ◽  
Mengming Yuan ◽  
Huali Zhu ◽  
Guang Zeng ◽  
Jun Liu ◽  
...  
Keyword(s):  
Noble Metals ◽  
High Efficiency ◽  
Low Cost ◽  
Three Dimensional ◽  
High Energy ◽  
High Energy Density ◽  
Cycle Performance ◽  
Energy Storage And Conversion ◽  
Actual Application ◽  
Charge Process

Nowadays, Li–CO2 batteries have attracted enormous interests due to their high energy density for integrated energy storage and conversion devices, superiorities of capturing and converting CO2. Nevertheless, the actual application of Li–CO2 batteries is hindered attributed to excessive overpotential and poor lifespan. In the past decades, catalysts have been employed in the Li–CO2 batteries and been demonstrated to reduce the decomposition potential of the as-formed Li2CO3 during charge process with high efficiency. However, as a representative of promising catalysts, the high costs of noble metals limit the further development, which gives rise to the exploration of catalysts with high efficiency and low cost. In this work, we prepared a K+ doped MnO2 nanowires networks with three-dimensional interconnections (3D KMO NWs) catalyst through a simple hydrothermal method. The interconnected 3D nanowires network catalysts could accelerate the Li ions diffusion, CO2 transfer and the decomposition of discharge products Li2CO3. It is found that high content of K+ doping can promote the diffusion of ions, electrons and CO2 in the MnO2 air cathode, and promote the octahedral effect of MnO6, stabilize the structure of MnO2 hosts, and improve the catalytic activity of CO2. Therefore, it shows a high total discharge capacity of 9,043 mAh g−1, a low overpotential of 1.25 V, and a longer cycle performance.

scholarly journals Superhydrophobic photothermal icephobic surfaces based on candle soot

2020 ◽  
Vol 117 (21) ◽  
pp. 11240-11246 ◽  
Author(s):  
Shuwang Wu ◽  
Yingjie Du ◽  
Yousif Alsaid ◽  
Dong Wu ◽  
Mutian Hua ◽  
...  
Keyword(s):  
High Efficiency ◽  
Low Cost ◽  
High Energy ◽  
Silica Shell ◽  
Oxygen Plasma Treatment ◽  
Human Society ◽  
Environmental Friendliness ◽  
Candle Soot ◽  
Low Surface Energy ◽  
Ice Accumulation

Ice accumulation causes various problems in our daily life for human society. The daunting challenges in ice prevention and removal call for novel efficient antiicing strategies. Recently, photothermal materials have gained attention for creating icephobic surfaces owing to their merits of energy conservation and environmental friendliness. However, it is always challenging to get an ideal photothermal material which is cheap, easily fabricating, and highly photothermally efficient. Here, we demonstrate a low-cost, high-efficiency superhydrophobic photothermal surface, uniquely based on inexpensive commonly seen candle soot. It consists of three components: candle soot, silica shell, and polydimethylsiloxane (PDMS) brushes. The candle soot provides hierarchical nano/microstructures and photothermal ability, the silica shell strengthens the hierarchical candle soot, and the grafted low-surface-energy PDMS brushes endow the surface with superhydrophobicity. Upon illumination under 1 sun, the surface temperature can increase by 53 °C, so that no ice can form at an environmental temperature as low as −50 °C and it can also rapidly melt the accumulated frost and ice in 300 s. The superhydrophobicity enables the melted water to slide away immediately, leaving a clean and dry surface. The surface can also self-clean, which further enhances its effectiveness by removing dust and other contaminants which absorb and scatter sunlight. In addition, after oxygen plasma treatment, the surface can restore superhydrophobicity with sunlight illumination. The presented icephobic surface shows great potential and broad impacts owing to its inexpensive component materials, simplicity, ecofriendliness, and high energy efficiency.

scholarly journals Towards Sustainable and Environmentally Friendly Metallic Powder Production

2021 ◽  
Author(s):  
MELCHOR SALAZAR MARTINEZ ◽  
Flavio Américo Lagos-Galván
Keyword(s):  
Low Cost ◽  
Environmentally Friendly ◽  
High Energy ◽  
Human Beings ◽  
Production Methods ◽  
Manufacture Process ◽  
Very High Energy ◽  
Current Production ◽  
Energy Consuming ◽  
Powder Manufacture

Abstract Intermetallic Fe-Al compounds have become very interesting materials due to their properties, such as good corrosion resistance, high-temperature resistance, high resistance/weight ratios, creep resistance, good wear resistance, and low cost, including some applications where they could replace stainless steels. However, their low ductility at room temperature has limited their use. One of the solutions is to generate powders of these intermetallics and press them in the wished form. Current production methods of this type of powders are very high energy-consuming, polluting, and harmful for handling for human beings. Because of the environmental situation in our planet, it is necessary to develop more environmentally friendly processes, which have lower energy requirements. Therefore, a comparison of a novel water vapor-based FeAl powder manufacture process with Mechanical Alloying (MA), one of the most commonly used processes to produce this type of powder is made in this work. This comparison aims to focus on the advantages of the novel process concerning MA, the last one, considering environmental as well as energy criteria.

scholarly journals Recent Advances in Synthesis and Properties of Nitrated-Pyrazoles Based Energetic Compounds

Molecules ◽  
2020 ◽  
Vol 25 (15) ◽  
pp. 3475 ◽  
Author(s):  
Shijie Zhang ◽  
Zhenguo Gao ◽  
Di Lan ◽  
Qian Jia ◽  
Ning Liu ◽  
...  
Keyword(s):  
Energetic Materials ◽  
High Performance ◽  
High Efficiency ◽  
Low Cost ◽  
Rapid Development ◽  
Development Trend ◽  
High Heat ◽  
High Energy ◽  
Heat Of Formation ◽  
Energetic Compounds

Nitrated-pyrazole-based energetic compounds have attracted wide publicity in the field of energetic materials (EMs) due to their high heat of formation, high density, tailored thermal stability, and detonation performance. Many nitrated-pyrazole-based energetic compounds have been developed to meet the increasing demands of high power, low sensitivity, and eco-friendly environment, and they have good applications in explosives, propellants, and pyrotechnics. Continuous and growing efforts have been committed to promote the rapid development of nitrated-pyrazole-based EMs in the last decade, especially through large amounts of Chinese research. Some of the ultimate aims of nitrated-pyrazole-based materials are to develop potential candidates of castable explosives, explore novel insensitive high energy materials, search for low cost synthesis strategies, high efficiency, and green environmental protection, and further widen the applications of EMs. This review article aims to present the recent processes in the synthesis and physical and explosive performances of the nitrated-pyrazole-based Ems, including monopyrazoles with nitro, bispyrazoles with nitro, nitropyrazolo[4,3-c]pyrazoles, and their derivatives, and to comb the development trend of these compounds. This review intends to prompt fresh concepts for designing prominent high-performance nitropyrazole-based EMs.

Design of Intelligent AC Contactor

2012 ◽  
Vol 198-199 ◽  
pp. 1179-1183
Author(s):  
Xiao Bin Li
Keyword(s):  
Energy Saving ◽  
Failure Rate ◽  
Fault Location ◽  
Low Cost ◽  
High Energy ◽  
Comprehensive System ◽  
Accurate Indication ◽  
On Line ◽  
Energy Consuming ◽  
And Control

Aiming at the problem of high energy consuming and failure rate on traditional AC contactor, the implement method of intelligent AC contactor is presented. The smart structures concept is introduced into the domain of AC contactor and the microcontroller C8051F040 is used as the control core. The intelligent AC contactor is a comprehensive system which assembles data acquisition and control, fault self-diagnosis and protection Function, etc. DC operation and on-line monitoring of the running state is also realized. Experiments show that the system has characteristics of low cost , accurate indication for running state and fault location, good protecting function, completely eliminating the noise and vibration operation, good performance in energy-saving , etc.

scholarly journals Salt-Resistive Photothermal Materials and Microstructures for Interfacial Solar Desalination

2021 ◽  
Vol 9 ◽  
Author(s):  
Xiaoqiang Yu ◽  
Qian Zhang ◽  
Xin Liu ◽  
Ning Xu ◽  
Lin Zhou
Keyword(s):  
Energy Transfer ◽  
High Efficiency ◽  
Low Cost ◽  
High Energy ◽  
Current Status ◽  
Long Term Stability ◽  
Solar Desalination ◽  
Point Of Use ◽  
Art Research

Solar interfacial evaporation, featured by high energy transfer efficiency, low cost, and environmental compatibility, has been widely regarded as a promising technology for solar desalination. However, the interplay between energy transfer and water transport in the same channels suggests that the tradeoff between high efficiency and long-term stability inherently exists in conventional photothermal nanomaterials. We summarize state-of-the-art research on various anti-salt clogging photothermal microstructures as long-term stable interfacial solar evaporators for solar desalination. The review starts with an overview of the current status and the fundamental limit of photothermal materials for solar desalination. Four representative strategies are analyzed in detail with the most recent experimental demonstrations, including fluid convection enhancement, surface wettability engineering, energy-mass-path decoupling, and surface chemistry engineering. Finally, this article focuses on the challenges in anti-salt clogging solar interfacial evaporators and potential point-of-use applications in the future.

scholarly journals Competitive Adsorption of Cadmium (II) from Aqueous Solutions onto Nanoparticles of Water Treatment Residual

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Elsayed Elkhatib ◽  
Ahmed Mahdy ◽  
Fatma Sherif ◽  
Walaa Elshemy
Keyword(s):  
Heavy Metals ◽  
Water Treatment ◽  
High Efficiency ◽  
Low Cost ◽  
High Energy ◽  
Water Treatment Residuals ◽  
Surface Complexes ◽  
Heavy Metals Removal ◽  
Metals Removal ◽  
Wastewater Samples

There is increasing interest in using water treatment residuals (WTRs) for heavy metals removal from wastewater due to their low cost, availability, and high efficiency in removing various pollutants. In this study, novel water treatment residuals nanoparticles (nWTRs) were prepared using high energy ball milling and used for efficient removal of Cd(II) in single- and multi-ion systems. The WTR nanoparticles demonstrated high removal efficiency for Cd from aqueous solution as the adsorption capacities of nWTR were 17 and 10 times higher than those of bulk WTR in single- and multielement systems, respectively. Noticeably, Cd(II) adsorption was clearly suppressed in the multi-ion system as Cu and Pb form the most stable monohydroxo complexes. Fourier transmission infrared (FTIR) analyses suggested the participation of OH−, O-Al-O, FeOH, and FeOOH entities in the adsorption process. The stability of Cd-nWTR surface complexes is evident as less than 0. 2% of adsorbed Cd(ll) was released at the highest Cd(II) concentration load after 4 consecutive desorption cycles. Moreover, the real efficiency of nWTR for Cd(II) removal from wastewater samples studied was calculated to be 98.35%. These results highlight the potential of nWTR for heavy metals removal from wastewater.

Sign in / Sign up

Export Citation Format

Share Document