Response of Sensitive Device of Piozoresistive Accelerometer to Load

2012 ◽  
Vol 203 ◽  
pp. 252-256
Author(s):  
Jian Hong Zhang
Keyword(s):  
Mechanical Properties ◽  
External Load ◽  
Optimization Design ◽  
Dynamic Deformation ◽  
Deformation Model ◽  
Virtual Operation ◽  
Deformation Equation ◽  
Sensitive Characteristics ◽  
Micro Cantilever ◽  
Micro Structures

The sensitive characteristics of sensitive device which was closely related to the mechanical properties of its micro elastic cantilever play a role in analysing the performance of piezoresistive accelerometer. To make a research on the response of the system to load, the deformation model of micro elastic cantilever of sensitive device belongs to piezoresistive accelerometer was built based on the method of system identification in this article to analyze their mechanical properties under static external load, the deformation equation was deduced and the quasi-dynamic deformation model of micro cantilever was obtained according to the principle that displacement was directly proportional to load. The conclusion could be used for evaluating the dynamic behavior of structure on virtual operation which would provide reference for optimization design of micro structures.

Methodology of studying the mechanical properties of composite materials (reinforced concrete)

2018 ◽  
Vol 84 (12) ◽  
pp. 61-67
Author(s):  
V. A. Eryshev
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Experimental Studies ◽  
Analytical Relationship ◽  
Hardened Concrete ◽  
Deformation Model ◽  
Joint Work ◽  
Concrete Shrinkage ◽  
Axial Tension ◽  
Tension And Compression

The mechanical properties of a complex composite material formed by steel and hardened concrete, are studied. A technique of operative quality control of new credible concrete and reinforcement, both in laboratory and field conditions is developed for determination of the strength and strain characteristics of materials, as well as cohesion forces determining their joint operation under load. The design of the mobile unit is presented. The unit provides a possibility of changing the direction of loading and testing the reinforced element of the given shape both for tension and compression. Moreover, the nomenclature of testing equipment and the number of molds for manufacturing concrete samples substantially decrease. Using the values of forcing resulting in concrete cracking when the joint work of concrete and reinforcement is disrupted the values of the inherent stresses and strains attributed to the concrete shrinkage are determined. An analytical relationship between the forces and deformations of the reinforced concrete sample with central reinforcement is derived for axial tension and compression, with allowance for strains and stresses in the reinforcement and concrete resulted from concrete shrinkage. The results of experimental studies are presented, including tension diagrams and diagrams of developing axial deformations with an increase in the load under the central loading of the reinforced elements. A methodology of accounting for stresses and deformations resulted from concrete shrinkage is developed. The applicability of the derived analytical relationships between stresses and deformations on the material diagrams to calculations of the reinforced concrete structures in the framework of the deformation model is estimated.

scholarly journals Mechanical properties optimization of the steering column based on multi-objective optimization design

2016 ◽  
Vol 8 (12) ◽  
pp. 168781401668294 ◽  
Author(s):  
Si Chen ◽  
Zhaohui Wang ◽  
Mi Lv
Keyword(s):  
Mechanical Properties ◽  
Process Parameters ◽  
Optimization Design ◽  
Strain Difference ◽  
Optimization Method ◽  
Equivalent Strain ◽  
Multi Objective Optimization ◽  
Optimal Process ◽  
Multi Objective ◽  
Initial Results

The mechanical properties of the steering column have a significant influence on the comfort and stability of a vehicle. In order for the mechanical properties to be improved, the rotary swaging process of the steering column is studied in this article. The process parameters, including axial feed rate, hammerhead speed, and hammerhead radial reduction, are systematically analyzed and optimized based on a multi-objective optimization design. The response surface methodology and the genetic algorithm are employed for optimal process parameters to be obtained. The maximum damage value, the maximum forming load, and the equivalent strain difference obtained with the optimal process parameters are, respectively, decreased by 30.09%, 7.44%, and 57.29% compared to the initial results. The comparative results present that the quality of the steering column is improved. The torque experiments and fatigue experiments are conducted with the optimal steering column. The maximum torque is measured to be 260 NM, and the service life is measured to be 2 weeks (40 NM, 2500 times), which are, respectively, increased by 8.3% and 8.69% compared to the initial results. The above results display that the mechanical properties of the steering column are optimized to verify the feasibility of the multi-objective optimization method.

Study on Mechanical Properties of the Composite Materials Film by Speckle Projection Method

2012 ◽  
Vol 496 ◽  
pp. 281-284
Author(s):  
Wen Wen Liu ◽  
Zhi Wang ◽  
Yun Hai Du ◽  
Xian Zhong Xu ◽  
Da Quan Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Composite Materials ◽  
Projection Method ◽  
Dynamic Deformation ◽  
Calibration Method ◽  
Deformation Measurement ◽  
Lens Distortion

An improved accurate speckle projection method is used for study the mechanical properties of the composite material film in the paper. A system for deformation measurement is developed with the telecentric lenses, in which such conventional lens’ disadvantages such as lens distortion and perspective error will be diminished. Experiments are performed to validate the availability and reliability of the calibration method. The system can also be used to measure the dynamic deformation and then results are also given.

Structural Optimization Design of MR Fluid Clutch

2007 ◽  
Vol 546-549 ◽  
pp. 1673-1676 ◽  
Author(s):  
Wei Jia Meng ◽  
Zhan Wen Huang ◽  
Yan Ju Liu ◽  
Xiao Rong Wu ◽  
Yi Sun
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Optimization Design ◽  
Element Analysis ◽  
Mr Fluids ◽  
Magneto Rheological ◽  
Ferromagnetic Fluids ◽  
Ferromagnetic Particles

Magnetorheological (MR) fluids are suspensions of micron sized ferromagnetic particles dispersed in varying proportions of a variety of non-ferromagnetic fluids. MR fluids exhibit rapid, reversible and significant changes in their rheological (mechanical) properties while subjected to an external magnetic field. In this paper, a double-plate magneto-rheological fluid (MRF) clutch with controllable torque output have been designed. Electromagnetic finite element analysis is used to optimize the design of the clutch by using the commercial FEA software ANSYS.

The Structure Optimization Design for the W-Type Metallic Sealing Ring Based on the MOGA Algorithm

2015 ◽  
Vol 727-728 ◽  
pp. 541-545
Author(s):  
Xiang Yu Ding
Keyword(s):  
Mechanical Properties ◽  
Optimal Design ◽  
Optimization Algorithm ◽  
Optimization Design ◽  
Structure Optimization ◽  
Ansys Software ◽  
Sealing Ring ◽  
Structure Optimization Design

This paper uses the ANSYS software to analysis the outer arm opening angel(OAOA) and the outer arm arc angle(OAAA) of W-type metallic sealing ring which can effects on the mechanical properties,obtained in that when the OAOA choose from 1.398°to 14.156 °and the OAAA choose from 30.21° to 59.5 °, the mechanical properties of the sealing ring can satisfy the requirement of use. Then using the MOGA optimization algorithm to optimize the design of W-type metallic sealing ring, and find when the OAOA choose 3.39°and the OAAA choose 32.18°are the optimal design of the W-type metallic sealing ring.

scholarly journals Experimental study on high temperature mechanical properties of aluminate cement mortar mixed with fiber

2021 ◽  
Vol 25 (6 Part B) ◽  
pp. 4441-4448
Author(s):  
Ping Xu ◽  
Dong Han ◽  
Jian-Xin Yu ◽  
Yu-Hao Cui ◽  
Min-Xia Zhang
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Cement Mortar ◽  
Steel Fibers ◽  
Basalt Fibers ◽  
High Temperature Mechanical Properties ◽  
Micro Structures ◽  
Aluminate Cement

The aim of the present paper is to study the mechanical properties of aluminate cement mortar mixed with different chopped fibers under high temperature. The specimens with a size of 40 mm ? 40 mm ? 160 mm is treated at various tempera?tures of 25?C, 200?C, 400?C, 600?C, and 800?C. The compressive and flexural strength of the aluminate cement mortar and its micro-structures are tested. The results show that the chopped steel fibers and basalt fibers are effective in improv?ing the high temperature mechanical properties of aluminate cement mortar. When the volume fraction of chopped steel fibers is 2%, the compressive strength and flexural strength of the test block treated at the temperature of 800?C increase by 18.3% and 128.6%, respectively.

scholarly journals The Effect of Reinforcement Ratio on the Composite Structure and Mechanical Properties in Al-MgO Composites Produced by the Melt Stirring Method

2011 ◽  
Vol 20 (4) ◽  
pp. 096369351102000 ◽  
Author(s):  
Recep Çalin ◽  
Pul Muharrem ◽  
Ramazan Çitak ◽  
Ulvi Şeker
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Metal Matrix ◽  
Vertical Direction ◽  
Homogeneous Distribution ◽  
Matrix Composites ◽  
Liquid Matrix ◽  
The Matrix ◽  
Micro Structures ◽  
Scanning Electron

In this study, Al- MgO metal matrix composites (MMC) were produced with 5 %, 10 % and 15 % reinforcement- volume (R-V) ratios by the melt stirring method. In the production of composites 99.5 % pure Al was used as the matrix and MgO powders with the particle size of −105 μm were used as the reinforcement. For every R-V ratio; stirring was made at 500 rev/min at 750°C liquid matrix temperature for 4 minutes and the samples were cooled under normal atmosphere. Then hardness and fracture strengths of the samples were determined and their micro structures were evaluated by using Scanning Electron Microscope (SEM). In general, it was observed that the reinforcement exhibited a homogeneous distribution in horizontal direction. But there is a slight inhomogeneity in vertical direction. It was determined that the increase in the R-V ratio increased the porosity and also the hardness. As for the fracture strength, the highest strength was obtained with the 5 % MgO reinforced sample.

Sign in / Sign up

Export Citation Format

Share Document