Parametric Analysis of Shear Behavior of Concrete Beams Reinforced with Continuous FRP Rectangular Spirals

2012 ◽  
Vol 217-219 ◽  
pp. 2435-2439
Author(s):  
Ying Tao Li ◽  
Shi Yong Jiang ◽  
Bing Hong Li ◽  
Qian Hua Shi ◽  
Xian Qi Hu
Keyword(s):  
Parametric Analysis ◽  
Failure Modes ◽  
Shear Failure ◽  
Shear Behavior ◽  
Shear Capacity ◽  
Reinforcement Ratio ◽  
Experimental Program ◽  
Longitudinal Reinforcement ◽  
Shear Span ◽  
Depth Ratio

An experimental program was carried out by the author to investigate the shear behavior of concrete beams reinforced with continuous FRP rectangular spirals, the main variables considered in the test were the shear reinforcement ratio and the shear span to depth ratio and the longitudinal reinforcement ratio. However, the experimental program is inadequate to gain insight into the shear behavior of the members. First, the quantities of test specimens were too small, only six beams were made and tested, the experimental database was so limited that the resultant analytical results and conclusions may not be sound enough. Second, not all the main factors that have influences on the shear behavior of the members have been treated as variables in the experimental program, such as the effective transverse compression stress and the concrete compression strength, the influences of these two factor on the shear behavior of the members were not clear yet through the experimental study. Considering the insufficient information provided by the experimental investigation, the parametric analysis of the shear behavior of the members was carried out, and a revised rotating-angle softened truss model for the shear analysis of the members was proposed as the analytical tool. Based on the proposed model, the influences of various factors on the shear capacity and shear failure modes of the members were discussed, related nonlinear analysis was carried out using the arithmetic of iteration and step approximation, and several FORTRAN codes were written accordingly. Through the experimental study and the parametric analysis, it is indicated that the shear capacity and the shear failure modes of the members are greatly influenced by three major factors, including the shear reinforcement ratio and the shear span to depth ratio and the effective transverse compression stress. The influences of the concrete compression strength and the longitudinal reinforcement ratio on the shear capacity are not noticeable comparatively. The shear capacity is little affected by the shear span to depth ratio in the case of the shear-tension failure, there is no noticeable correlation between longitudinal reinforcement ratio and the shear failure modes.

Shear Capacity of Concrete Beams Reinforced with Continuous FRP Rectangular Spirals

2012 ◽  
Vol 204-208 ◽  
pp. 3009-3015
Author(s):  
Bing Hong Li ◽  
Shi Yong Jiang ◽  
Qian Hua Shi ◽  
Xian Qi Hu
Keyword(s):  
Failure Modes ◽  
Shear Failure ◽  
Concrete Beams ◽  
Point Load ◽  
Shear Capacity ◽  
Experimental Program ◽  
Arch Model ◽  
Longitudinal Reinforcement ◽  
Shear Reinforcement ◽  
Shear Span

The failure modes and the shear capacity of concrete beams reinforced with FRP reinforcement were discussed through an experimental investigation, in which continuous FRP rectangular spirals were used for shear reinforcement, while ordinary deformed steel bars are used for longitudinal reinforcement. Six concrete beams reinforced with FRP spirals were tested, the main variables considered were the shear reinforcement ratios, the shear span to depth ratios and the longitudinal reinforcement ratios. Two concrete beams of equal shear capacity which reinforced with continuous steel rectangular spirals were also tested to compare the behavior of concrete beams reinforced with different materials of spirals. All beams were tested as simply supported members subjected to a three-point load, the span of the beams varied in terms of different shear span to depth ratios. The test results show that the shear capacity and shear failure modes are greatly influenced by the shear reinforcement ratios and the shear span to depth ratios, the shear resistance provided by steel spirals is higher than that provided by FRP spirals in the case of equal shear capacity of beams, which is attributed to the differences in material properties and may result in different shear failure types. Based on the experimental program, four mechanical models are derived to give more accurate predictions of the shear capacity of test beams, the calculation results of these models are compared with that of the existing shear formulas or equations for concrete beams reinforced with FRP stirrups or spirals. The rotating-angle softened truss model, the strut-and-tie model, the shear formulas derived from the truss-arch model and Zsutty equations are suggested through comparison.

SHEAR BEHAVIOR OF REINFORCED CONCRETE SLENDER BEAMS

2016 ◽  
Vol 3 (1) ◽  
Author(s):  
Muhammad K. Kayani ◽  
Wasim Khaliq ◽  
Muhammad K. Shehzad
Keyword(s):  
Reinforced Concrete ◽  
Shear Behavior ◽  
Shear Capacity ◽  
Experimental Program ◽  
Longitudinal Reinforcement ◽  
Rc Beams ◽  
Shear Reinforcement ◽  
Shear Span ◽  
Depth Ratio ◽  
Slender Beams

Major factors contributing to the shear behavior in reinforced concrete (RC) beams have been identified as compressive strength of concrete, shear span to effective depth ratio, and longitudinal reinforcement. Though significant, few of these factors are not fully incorporated in ACI code provisions for design of minimum shear reinforcement. To investigate the effect of these parameters, an analytical and experimental study was undertaken on the shear behavior of ordinary strength RC slender beams with moderate longitudinal reinforcement. The experimental program consisted of testing of eight simply supported RC slender beams subjected to two concentrated loads at a shear span to depth ratio (a/d) of 2.5 and equipped with varying shear reinforcement according to four different criteria. Ultimate shear strengths obtained in this experimental program are compared to the analytical shear strengths calculated according to existing as well as proposed equations. Test results exhibit that, the modified equation proposed in this work gives more accurate prediction of shear capacity of RC beams.

scholarly journals Experimental Study on Shear Capacity of High Strength Reinforcement Concrete Deep Beams with Small Shear Span–Depth Ratio

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1218 ◽  
Author(s):  
Jun-Hong Zhang ◽  
Shu-Shan Li ◽  
Wei Xie ◽  
Yang-Dong Guo
Keyword(s):  
High Strength ◽  
Shear Capacity ◽  
Reinforcement Ratio ◽  
Longitudinal Reinforcement ◽  
Deep Beams ◽  
Shear Span ◽  
Depth Ratio ◽  
Diagonal Compression ◽  
Web Reinforcement ◽  
Small Shear

This study aimed to investigate the shear capacity performance for eight deep beams with HTRB600 reinforced high strength concrete under concentrated load to enable a better understanding of the effects of shear span–depth ratio, longitudinal reinforcement ratio, vertical stirrup ratio and in order to improve design procedures. The dimension of eight test specimens is 1600 mm × 200 mm × 600 mm. The effective span to height ratio l0/h is 2.0, the shear span–depth ratio λ is 0.3, 0.6 and 0.9, respectively. In addition, the longitudinal reinforcement ratio ρs is set to 0.67%, 1.05%, 1.27%, and the vertical stirrup ratio is taken to be 0%, 0.25%, 0.33%, 0.5%. Through measuring the strain of steel bar, the strain of concrete and the deflection of mid-span, the characteristics of the full process of shear capacity, the failure mode and the load deflection deformation curve were examined. The test results showed that the failure mode of deep beams with small shear span–depth ratio is diagonal compression failure, which is influenced by the layout and quantity of web reinforcement. The diagonal compression failure could be classified into two forms: crushing-strut and diagonal splitting. With decreasing of shear span–depth ratio and increasing longitudinal reinforcement ratio, the shear capacity of deep beams increases obviously, while the influence of vertical web reinforcement ratio on shear capacity is negligible. Finally, the shear capacity of eight deep beams based on GB 50010-2010 is calculated and compared with the calculation results of ACI 318-14, EN 1992-1-1:2004 and CSA A23.3-04, which are based on strut-and-tie model. The obtained results in this paper show a very good agreement with GB50010-2010 and ACI 318-14, while the results of EN 1992-1-1:2004 and CSA A23.3-04 are approved to be conservative.

Shear Behavior of CFRP Prestressed Concrete Beams without Stirrups

2011 ◽  
Vol 266 ◽  
pp. 126-129 ◽  
Author(s):  
Zuo Hu Wang ◽  
Xiu Li Du ◽  
Jing Bo Liu
Keyword(s):  
Prestressed Concrete ◽  
Failure Modes ◽  
Shear Failure ◽  
Concrete Beams ◽  
Shear Behavior ◽  
Shear Capacity ◽  
Shear Span ◽  
Compression Failure ◽  
Concrete Members ◽  
Prestressed Beams

Five beams were tested up to failure to study the shear behavior of concrete beams prestressed with fiber reinforced polymer (FRP). Different factors were taken into consideration: the type of prestressing tendons and the shear span ratio. The shear failure modes and the influence of different factors on shear behavior were investigated in details. The test results showed that FRP prestressed beams without stirrups had two shear failure modes: diagonal compression failure and shear compression failure; the shear span ratio was the most important factor to determine the failure mode and shear capacity of the prestressed beams. The shear capacity of concrete members prestressed with FRP tendons was lower than that of concrete beams prestressed with steel cables.

scholarly journals Experimental Study on Shear Behavior of Reactive Powder Concrete Beam

2022 ◽  
Vol 2148 (1) ◽  
pp. 012032
Author(s):  
Yuexia Li ◽  
Huijun Yang ◽  
Chao Liu
Keyword(s):  
Failure Mode ◽  
High Strength ◽  
Shear Behavior ◽  
Shear Capacity ◽  
Reinforcement Ratio ◽  
Reactive Powder Concrete ◽  
Deformation Capacity ◽  
Longitudinal Reinforcement ◽  
Shear Span ◽  
Reactive Powder

Abstract In order to study the shear behavior of high-strength reinforced Reactive Powder Concrete (RPC) beams, eight test beams were designed and fabricated for the shear test under symmetrical concentrated load. By observing the development and failure mode of diagonal cracks, the influence of shear span ratio, stirrup ratio, and longitudinal reinforcement ratio on the cracking load, shear capacity, and deflection of the test beam is analyzed. The results show that: in a specific range, the shear capacity increases with the increase of stirrup ratio and longitudinal reinforcement ratio and decreases with the increase of shear span ratio. The shear span ratio has the most significant influence on the component’s failure mode and deformation capacity. The increase of the stirrup ratio can improve the deformation capacity of the component in a specific range. It is conservative to use the code to design concrete structures to calculate the shear capacity of high-strength reinforced reactive powder concrete beams. It is suggested that the shear calculation formula suitable for high-strength reinforced reactive powder concrete should be adopted to make the theoretical calculation results closer to the measured values.

Shear Failure Analysis of Concrete Beams Reinforced with Newly Developed GFRP Stirrups

2006 ◽  
Vol 324-325 ◽  
pp. 995-998
Author(s):  
Cheol Woo Park ◽  
Jong Sung Sim
Keyword(s):  
Failure Modes ◽  
Shear Failure ◽  
Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Experimental Program ◽  
Shear Stresses ◽  
Fiber Reinforced ◽  
Shear Span ◽  
Reinforced Polymer ◽  
A New Technique

Even though the application of fiber reinforced polymer (FRP) as a concrete reinforcement becomes more common with various advantages, one of the inherent shortcomings may include its brittleness and on-site fabrication and handling. Therefore, the shape of FRP products has been limited only to a straight bar or sheet type. This study suggests a new technique to use glass fiber reinforced polymer (GFRP) bars for the shear reinforcement in concrete beams, and investigates its applicability. The developed GFRP stirrup was used in the concrete instead of ordinary steel stirrups. The experimental program herein evaluates the effectiveness of the GFRP stirrups with respect to different shear reinforcing ratios under three different shear span-to-depth testing schemes. At the same shear reinforcing ratio, the ultimate loads of the beams were similar regardless the shear reinforcing materials. Once a major crack occurs in concrete, however, the failure modes seemed to be relatively brittle with GFRP stirrups. From the measured strains on the surface of concrete, the shear stresses sustained by the stirrups were calculated and the efficiency of the GFRP stirrups was shown to be 91% to 106% depending on the shear span-to-depth ratio.

Analysis of seismic performance and research of load capacity of steel reinforced high strength concrete columns with rectangular helical hoops

2020 ◽  
pp. 136943322098165
Author(s):  
Jianyang Xue ◽  
Xin Zhang ◽  
Xiaojun Ke
Keyword(s):  
Failure Mode ◽  
Seismic Performance ◽  
Calculation Method ◽  
High Strength Concrete ◽  
Failure Modes ◽  
Shear Failure ◽  
High Strength ◽  
Shear Capacity ◽  
Strength Concrete ◽  
Shear Span

This paper mainly focused on the seismic performance and shear calculation method of steel reinforced high-strength concrete (SRHC) columns with rectangular helical hoops. An experimental investigation was performed in this paper. Eleven SRHC columns with rectangular helical hoops and one with ordinary hoops were constructed at the laboratory of Guangxi university. The failure modes, hysteresis loops, envelope curves, characteristic loads and displacements and cumulative damage analysis are presented and investigated. It can be seen from the test results that the failure modes of SRHC columns can be divided into three types with the shear span ratio increased, namely, shear baroclinic failure mode, flexure-shear failure mode and flexure failure mode. In addition, the specimens with rectangular helical hoops have plumper hysteretic loops. Shear span ratio is the main influencing factor of characteristic load; the axial compression ratio and concrete strength have less influence on characteristic load, while stirrup ratio has little effect on the characteristic load. Finally, a calculation method for shear capacity of SRHC columns under shear baroclinic failure and flexure-shear failure mode is proposed.

scholarly journals Fire Resistance Investigation of Simple Supported RC Beams with Varying Reinforcement Configurations

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Yamin Song ◽  
Chuanguo Fu ◽  
Shuting Liang ◽  
Ankang Yin ◽  
Longji Dang
Keyword(s):  
High Temperature ◽  
Fire Resistance ◽  
Room Temperature ◽  
Shear Failure ◽  
Failure Time ◽  
Shear Capacity ◽  
Reinforcement Ratio ◽  
Longitudinal Reinforcement ◽  
Rc Beams ◽  
Vertical Deflection

To investigate fire-resistance behaviors of simple supported reinforced concrete (RC) beams with three faces exposed to fire, six full-scale specimens were designed in accordance with the principle of “strong bending and weak shearing.” One beam was treated as the control case of room temperature while the other five beams were exposed to high temperature. Parameters related to shear capacity were discussed, such as longitudinal reinforcement ratio and stirrup ratio. The experimental results show that brittle shear failure under room temperature may transfer to shear-bend failure at high temperature due to thermal expansion and strength degradation of concrete and steel. The greater the longitudinal reinforcement ratio, the longer the failure time of specimens. It indicates that the pinning action of longitudinal reinforcement can significantly improve the shear capacity of beams under high temperature. In addition, the configuration of stirrup reinforcement can effectively reduce the brittle change of vertical deflection when the beam enters the failure stage.

scholarly journals Shear tests on GFRP reinforced concrete beams

2020 ◽  
Vol 323 ◽  
pp. 01009
Author(s):  
Damian Szczech ◽  
Renata Kotynia
Keyword(s):  
Failure Modes ◽  
Shear Failure ◽  
Concrete Beams ◽  
Reinforcement Ratio ◽  
Reinforced Concrete Beams ◽  
Shear Behaviour ◽  
Experimental Program ◽  
Glass Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced

This paper aims to investigate the shear failure mechanisms in beams reinforced with longitudinal and transverse glass fibre reinforced polymer bars. It is a part of comprehensive research on shear in concrete beams reinforced with steel and GFRP bars. The experimental program is composed of six real-scale single-span, simply-supported T-cross section concrete beams. The beams varied mainly with respect to the longitudinal reinforcement ratio (2.91% and 3.69%), bar diameter (25mm and 28mm, respectively) and transverse reinforcement ratio (0.16% and 0,33%). The paper presents test results, cracking patterns, failure modes and an analysis of the influence of variable parameters on the shear behaviour of elements.

Sign in / Sign up

Export Citation Format

Share Document