Passive Attitude Control Torque Generation Performances of a Gravity Gradient Stabilized Satellite

2012 ◽  
Vol 225 ◽  
pp. 458-463 ◽  
Author(s):  
Nurulasikin Mohd Suhadis ◽  
Renuganth Varatharajoo
Keyword(s):  
Attitude Control ◽  
Control Algorithm ◽  
Low Earth Orbit ◽  
Gravity Gradient ◽  
Control Torque ◽  
Satellite Mission ◽  
Torque Generation ◽  
Geomagnetic Field Models ◽  
Geomagnetic Fields ◽  
Operation Results

In this paper, the Proportional-Derivative (PD) based attitude control algorithm of the gravity gradient stabilized satellite has been developed. The satellite is equipped with 3 magnetic torquers where each of the magnetic torquer is placed along the +x, +y, +z axes. The control torque is generated when the magnetic field generated by the magnetic torquers couples with the geomagnetic fields, whereby the vector of the generated torque is perpendicular to both the magnetic fields. The developed control algorithm was simulated using the complex and simplified geomagnetic field models for a Low Earth Orbit (LEO) satellite mission in a nominal attitude operation. Results from simulations exhibit the effectiveness of the attitude control torque generation that fulfills the mission attitude control requirements.

scholarly journals Roto-Translational Control of Spacecraft in Low Earth Orbit Using Environmental Forces and Torques

2021 ◽  
Vol 11 (10) ◽  
pp. 4606
Author(s):  
Camilo Riano-Rios ◽  
Alberto Fedele ◽  
Riccardo Bevilacqua
Keyword(s):  
Translational Control ◽  
Attitude Control ◽  
Center Of Mass ◽  
Low Earth Orbit ◽  
Gravity Gradient ◽  
Adaptive Controllers ◽  
Attitude Error ◽  
Track Formation ◽  
Relative Orbit ◽  
Along Track

In this paper, relative orbit and attitude adaptive controllers are integrated to perform roto-translational maneuvers for CubeSats equipped with a Drag Maneuvering Device (DMD). The DMD enables the host CubeSat with modulation of aerodynamic forces/torques and gravity gradient torque. Adaptive controllers for independent orbital and attitude maneuvers are revisited to account for traslational-attitude coupling while compensating for uncertainty in parameters such as atmospheric density, drag/lift coefficients, location of the Center of Mass (CoM) and inertia matrix. Uniformly ultimately bounded convergence of the attitude error and relative orbit states is guaranteed by Lyapunov-based stability analysis for the integrated roto-translational maneuver. A simulation example of an along-track formation maneuver between two CubeSats with simultaneous attitude control using only environmental forces and torques is presented to validate the controller.

scholarly journals Attitude Analysis of Small Satellites Using Model-Based Simulation

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Samir A. Rawashdeh
Keyword(s):  
Attitude Control ◽  
Magnetic Hysteresis ◽  
Space Station ◽  
Low Earth Orbit ◽  
Gravity Gradient ◽  
Simulation Tool ◽  
Shape Modelling ◽  
Small Satellites ◽  
Magnetic Stabilization ◽  
Aerodynamic Torque

CubeSats, and small satellites in general, being small and relatively light, are sensitive to disturbance torques in the orbital environment. We developed a simulation tool that includes models of the major environmental torques and small satellite experiences in low Earth orbit, which allows users to study the attitude response for a given spacecraft and assist in the design of attitude control systems, such as selecting the magnet strength when using passive magnetic stabilization or designing the shape of the spacecraft when using aerodynamic attitude stabilization. The simulation tool named the Smart Nanosatellite Attitude Propagator (SNAP) has been public in precompiled form and widely used since 2010; this paper accompanies the release of SNAP’s source code with the inclusion of new models for aerodynamic torque and other new features. Details on internal models are described, including the models for orbit propagation, Earth’s magnetic field, gravity gradient torque, spacecraft shape modelling and aerodynamic torque, permanent magnetic dipole torque, and magnetic hysteresis. A discussion is presented on the significance of aerodynamic torque and magnetic hysteresis on a magnetically stabilized 3-unit CubeSat in the orbit of the International Space Station, from which many small satellites are deployed.

Two-timescale magnetic attitude control of Low-Earth-Orbit spacecraft

2021 ◽  
pp. 106884
Author(s):  
Giulio Avanzini ◽  
Emanuele L. de Angelis ◽  
Fabrizio Giulietti
Keyword(s):  
Attitude Control ◽  
Low Earth Orbit ◽  
Earth Orbit ◽  
Magnetic Attitude Control

scholarly journals Design of Satellite Attitude Control Algorithm Based on the SDRE Method Using Gas Jets and Reaction Wheels

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Luiz C. G. de Souza ◽  
Victor M. R. Arena
Keyword(s):  
Attitude Control ◽  
Control Algorithm ◽  
Controller Design ◽  
Algorithm Design ◽  
Large Angle ◽  
Space Mission ◽  
Control Technique ◽  
Gas Jets ◽  
State Dependent ◽  
Highly Nonlinear

An experimental attitude control algorithm design using prototypes can minimize space mission costs by reducing the number of errors transmitted to the next phase of the project. The Space Mechanics and Control Division (DMC) of INPE is constructing a 3D simulator to supply the conditions for implementing and testing satellite control hardware and software. Satellite large angle maneuver makes the plant highly nonlinear and if the parameters of the system are not well determined, the plant can also present some level of uncertainty. As a result, controller designed by a linear control technique can have its performance and robustness degraded. In this paper the standard LQR linear controller and the SDRE controller associated with an SDRE filter are applied to design a controller for a nonlinear plant. The plant is similar to the DMC 3D satellite simulator where the unstructured uncertainties of the system are represented by process and measurements noise. In the sequel the State-Dependent Riccati Equation (SDRE) method is used to design and test an attitude control algorithm based on gas jets and reaction wheel torques to perform large angle maneuver in three axes. The SDRE controller design takes into account the effects of the plant nonlinearities and system noise which represents uncertainty. The SDRE controller performance and robustness are tested during the transition phase from angular velocity reductions to normal mode of operation with stringent pointing accuracy using a switching control algorithm based on minimum system energy. This work serves to validate the numerical simulator model and to verify the functionality of the control algorithm designed by the SDRE method.

scholarly journals Neighboring Optimal Guidance and Constrained Attitude Control for Accurate Orbit Injection

2021 ◽  
Author(s):  
Mauro Pontani ◽  
Fabio Celani
Keyword(s):  
Attitude Control ◽  
Initial Position ◽  
Low Earth Orbit ◽  
Guidance And Control ◽  
Optimal Guidance ◽  
Combined Use ◽  
Upper Stage ◽  
Neighboring Optimal Guidance ◽  
And Control ◽  
Guidance Technique

AbstractAccurate orbit injection represents a crucial issue in several mission scenarios, e.g., for spacecraft orbiting the Earth or for payload release from the upper stage of an ascent vehicle. This work considers a new guidance and control architecture based on the combined use of (i) the variable-time-domain neighboring optimal guidance technique (VTD-NOG), and (ii) the constrained proportional-derivative (CPD) algorithm for attitude control. More specifically, VTD-NOG & CPD is applied to two distinct injection maneuvers: (a) Hohmann-like finite-thrust transfer from a low Earth orbit to a geostationary orbit, and (b) orbit injection of the upper stage of a launch vehicle. Nonnominal flight conditions are modeled by assuming errors on the initial position, velocity, attitude, and attitude rate, as well as actuation deviations. Extensive Monte Carlo campaigns prove effectiveness and accuracy of the guidance and control methodology at hand, in the presence of realistic deviations from nominal flight conditions.

The study of gravity gradient effect on attitude of low earth orbit satellite

2013 ◽  
Author(s):  
Nor Hazadura Hamzah ◽  
Sazali Yaacob ◽  
Hariharan Muthusamy ◽  
Norhizam Hamzah ◽  
Najah Ghazali
Keyword(s):  
Low Earth Orbit ◽  
Gravity Gradient ◽  
Earth Orbit ◽  
Gradient Effect ◽  
Orbit Satellite ◽  
Low Earth Orbit Satellite

scholarly journals From GPS Receiver to GNSS Reflectometry Payload Development for the Triton Satellite Mission

2021 ◽  
Vol 13 (5) ◽  
pp. 999
Author(s):  
Yung-Fu Tsai ◽  
Wen-Hao Yeh ◽  
Jyh-Ching Juang ◽  
Dian-Syuan Yang ◽  
Chen-Tsung Lin
Keyword(s):  
Satellite System ◽  
Low Earth Orbit ◽  
Export Control ◽  
Navigation Systems ◽  
Gps Receiver ◽  
Design Development ◽  
Satellite Mission ◽  
Essential Components ◽  
Gnss Reflectometry ◽  
Global Navigation Satellite

The global positioning system (GPS) receiver has been one of the most important navigation systems for more than two decades. Although the GPS system was originally designed for near-Earth navigation, currently it is widely used in highly dynamic environments (such as low Earth orbit (LEO)). A space-capable GPS receiver (GPSR) is capable of providing timing and navigation information for spacecraft to determine the orbit and synchronize the onboard timing; therefore, it is one of the essential components of modern spacecraft. However, a space-grade GPSR is technology-sensitive and under export control. In order to overcome export control, the National Space Organization (NSPO) in Taiwan completed the development of a self-reliant space-grade GPSR in 2014. The NSPO GPSR, built in-house, has passed its qualification tests and is ready to fly onboard the Triton satellite. In addition to providing navigation, the GPS/global navigation satellite system (GNSS) is facilitated to many remote sensing missions, such as GNSS radio occultation (GNSS-RO) and GNSS reflectometry (GNSS-R). Based on the design of the NSPO GPSR, the NSPO is actively engaged in the development of the Triton program (a GNSS reflectometry mission). In a GNSS-R mission, the reflected signals are processed to form delay Doppler maps (DDMs) so that various properties (including ocean surface roughness, vegetation, soil moisture, and so on) can be retrieved. This paper describes not only the development of the NSPO GPSR but also the design, development, and special features of the Triton’s GNSS-R mission. Moreover, in order to verify the NSPO GNSS-R receiver, ground/flight tests are deemed essential. Then, data analyses of the airborne GNSS-R tests are presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document