The Choice of Basic Pillar Design Theory for Locked Sand Condition

2012 ◽  
Vol 256-259 ◽  
pp. 354-357
Author(s):  
Zi Wei Ding ◽  
Amirhossein Bagherieh ◽  
Rui Min Feng ◽  
Xing Xing Wen
Keyword(s):  
Design Theory ◽  
Design Method ◽  
Friction Angle ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Pillar Design ◽  
Design Theories ◽  
Locked Sand ◽  
Unconfined Strength ◽  
Very High

Because of unique properties of locked sand (very high friction angle and very low cohesion), a new pillar design method based on present basic pillar design theories must be developed. Wilson theory puts its focus on confining pressure, which is related to friction angle and cohesion. Triaxial tests results show that locked sand at Pattison mine has an average friction angle of 57°, which means the strength of the material increases rapidly with the confining pressure, and average cohesion of 2.6 MPa. Results show that choosing Wilson theory as basic pillar design theory not only considers the high friction angle of locked sand, but also minimizes the effects of Wilson’s hypothesis of neglecting the unconfined strength.

scholarly journals Experimental Study of Stress-Seepage Coupling Properties of Sandstone under Different Loading Paths

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-21
Author(s):  
Xi Chen ◽  
Wei Wang ◽  
Yajun Cao ◽  
Qizhi Zhu ◽  
Weiya Xu ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Pore Pressure ◽  
Complex Loading ◽  
Friction Angle ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Compression Tests ◽  
Biot Coefficient ◽  
Cyclic Loading And Unloading ◽  
Loading And Unloading

The study on hydromechanical coupling properties of rocks is of great importance for rock engineering. It is closely related to the stability analysis of structures in rocks under seepage condition. In this study, a series of conventional triaxial tests under drained condition and hydrostatic compression tests under drained or undrained condition on sandstones were conducted. Moreover, complex cyclic loading and unloading tests were also carried out. Based on the experimental results, the following conclusions were obtained. For conventional triaxial tests, the elastic modulus, peak strength, crack initiation stress, and expansion stress increase with increased confining pressure. Pore pressure weakened the effect of the confining pressure under drained condition, which led to a decline in rock mechanical properties. It appeared that cohesion was more sensitive to pore pressure than to the internal friction angle. For complex loading and unloading cyclic tests, in deviatoric stress loading and unloading cycles, elastic modulus increased obviously in first loading stage and increased slowly in next stages. In confining pressure loading and unloading cycles, the Biot coefficient decreased first and then increased, which indicates that damage has a great impact on the Biot coefficient.

scholarly journals Experimental study on the thermal damage characteristics of cement stone

2020 ◽  
pp. 317-317
Author(s):  
Feng Xu ◽  
Bowen Qian ◽  
Ling Tan ◽  
Jianqiang Xu ◽  
Shengchuan Tang ◽  
...  
Keyword(s):  
Strain Curve ◽  
Horizontal Wells ◽  
Friction Angle ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Cement Stone ◽  
Different Temperatures ◽  
Confining Pressures ◽  
Southwest Region ◽  
Sealing Failure

Aiming at the problem of cement ring sealing failure during deep high-temperature shale gas exploitation, comprehensively considering the influence of the characteristics of multi-cluster fracturing of multiple horizontal wells and formation temperature, the cementing cement the southwest region is taken as the research object. After exposure to different temperatures (95?C and 135?C) and for different times (5, 10 and 20 times), axial and triaxial tests with different confining pressures (0, 5 MPa, 15 MPa and 30 MPa) were carried out. The research shows that: (1) the stress-strain curve of cement stone after heat treatment can be divided into four stages: compaction, elastic, yield and post-peak stage. As the confining pressure increases, the compaction phase disappears, the yield phase increases, and we see the transition from brittle to ideal plasticity after the peak; (2) as the temperature and number of thermal cycles increase, the cohesive force decreases significantly, and the internal friction angle shows a slight increase. The elastic modulus and the peak strength decreased.

Study on the Deformation and Strength Characteristics of Geotechnical Grille Reinforced Sand-Gravel under Low Confining Pressure

2011 ◽  
Vol 250-253 ◽  
pp. 2632-2639
Author(s):  
Bin Xu ◽  
De Gao Zou ◽  
Jing Bi ◽  
Xian Jing Kong ◽  
Tao Gong
Keyword(s):  
Residual Strength ◽  
Large Scale ◽  
Volumetric Strain ◽  
Friction Angle ◽  
Confining Pressure ◽  
Peak Strength ◽  
Strength Characteristics ◽  
Triaxial Tests ◽  
Reinforced Sand ◽  
Deformation And Strength Characteristics

A series of large scale consolidated drained shear triaxial tests were performed on reinforced and unreinforced sand-gravel specimens, the peak strength and residual strength characteristics of reinforced and unreinforced sand-gravel specimens were compared. The results show that: the peak strength, the residual strength and cohesion of reinforced sand-gravel are higher than unreinforced specimens, and is related to the characteristics of geotechnical grille used in this study. However, adding geotechnical grille has less effect on maximum volumetric strain and internal friction angle of sand-gravel.

scholarly journals Effect of Bentonite Content and Hydration Time on Mechanical Properties of Sand–Bentonite Mixture

2021 ◽  
Vol 11 (24) ◽  
pp. 12001
Author(s):  
Yue Qin ◽  
Dongsheng Xu ◽  
Borana Lalit
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Friction Angle ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Model Parameters ◽  
Hydration Time ◽  
Static Properties ◽  
Bentonite Slurry ◽  
Contact Force Distribution

The bentonite is commonly used mixed with soils for groundwater retention and waste contaminant facilities. The incorporation of bentonite could significantly reduce hydraulic conductivity. In this study, the effects of bentonite content, hydration time and effective confining pressure on the static properties of a sand–bentonite mixture were studied using experimental and numerical methods. Firstly, a large number of drainage static triaxial tests on the sand–bentonite mixture with various bentonite contents were conducted. The test results show that the increase in bentonite content and hydration time leads to a slight decrease in shear strength and initial tangent modulus of the sand–bentonite mixture. The presence of bentonite reduces the shear shrinkage and dilatancy trend of the mixture. The cohesion of the mixture increases with the increase in bentonite content and hydration time, but the internal friction angle decreases correspondingly. The hydration of bentonite on the surface of sand particles changes the contact form between particles. The bentonite slurry between pores of the sand skeleton also affects the mechanical behavior of the sand–bentonite mixture. Then, a series of 3D discrete element models were established for numerical simulations of drainage static triaxial tests. The numerical model parameters were calibrated by experimental results. The meso-mechanism of bentonite content affecting the mechanical behavior was revealed according to the contact force distribution between particles. The research results are helpful to understand further the mechanism of bentonite on the mechanical properties of the sand–bentonite mixture.

scholarly journals The Confined Compressive Strength of Polycrystalline Ice

1982 ◽  
Vol 28 (98) ◽  
pp. 171-178 ◽  
Author(s):  
Stephen J. Jones
Keyword(s):  
Compressive Strength ◽  
Strain Rate ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Strain Rates ◽  
Maximum Compressive Stress ◽  
A Value ◽  
Polycrystalline Ice ◽  
Confining Pressures ◽  
Unconfined Strength

AbstractTriaxial tests were carried out on randomly oriented, laboratory-made, polycrystalline ice, between strain-rates of 10–7 and 10–1 s–1 and with confining pressures from 0.1 to 85 MN m–2, at –11 ± 1°C. Below strain-rates of about 10–5 s–1 the confining pressure has little effect, but at higher strain-rates the confining pressure prevents cracking which allows the compressive strength to rise to a value greater than the unconfined compressive strength. At 1.4 ×10–2 s–1, the unconfined strength of 12 MN m–2 rises to 26 MN m–2 with a confining pressure of 25 MN m–2, before dropping slowly with greater confining pressures. Above 10–2 s–1 the unconfined strength decreases rapidly with increasing strain-rate, but the confined strength continues to increase. The dependence of strain rate on the maximum compressive stress is discussed.

scholarly journals Shear Properties of Asphalt Mixtures under Triaxial Compression

2019 ◽  
Vol 9 (7) ◽  
pp. 1489 ◽  
Author(s):  
Tuo Huang ◽  
Shuai Qi ◽  
Hongfu Liu ◽  
Huanan Yu ◽  
Sheng Li
Keyword(s):  
Shear Strength ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Friction Angle ◽  
Confining Pressure ◽  
Asphalt Mixtures ◽  
Triaxial Tests ◽  
Cohesion Strength ◽  
Failure Envelope ◽  
Shear Properties

In order to study the influences of confining pressure and temperature on the shear properties of asphalt mixtures, triaxial tests were conducted at 40 °C, 50 °C, and 60 °C, with the confining pressure ranges from 0 to 1 MPa for the widely used continuous-graded AC (Asphalt Concrete)-13, open-graded OGFC (Open-Graded Friction Course)-13, and gap-graded SMA (Stone Mastic Asphalt)-13 asphalt mixtures in China. A nonlinear regression/prediction model of triaxial strength for asphalt mixtures was proposed. The results show that confining pressure and temperature had a significant effect on the shear resistance of asphalt mixtures. With increasing temperature, the shear strength of the asphalt mixture gradually decreased due to the decreasing of cohesion strength; the shear strength of the asphalt mixture increased with the increase of confining pressure. Meanwhile, the cohesion strength increased and the friction angle decreased gradually with the increase of confining pressure. When the confining pressure was close to 0.6 MPa, the Mohr–Coulomb failure envelope bended down, so the linear Mohr–Coulomb criterion is not suitable to describe the failure behavior of asphalt mixtures. Therefore, a power function failure envelope was put forward to characterize the nonlinear shear properties of asphalt mixtures. The nonlinear evolutional laws of shear parameters, which includes cohesion strength and friction angle, were also proposed for asphalt pavement material and structure design. Among these asphalt mixtures, the gap-graded SMA-13 asphalt mixture exhibited better performance on the resistance to shear failure, and it was recommended as the upper layer material to improve the shear performance of asphalt pavement.

scholarly journals The Confined Compressive Strength of Polycrystalline Ice

1982 ◽  
Vol 28 (98) ◽  
pp. 171-178 ◽  
Author(s):  
Stephen J. Jones
Keyword(s):  
Compressive Strength ◽  
Strain Rate ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Strain Rates ◽  
Maximum Compressive Stress ◽  
A Value ◽  
Polycrystalline Ice ◽  
Confining Pressures ◽  
Unconfined Strength

Abstract Triaxial tests were carried out on randomly oriented, laboratory-made, polycrystalline ice, between strain-rates of 10–7 and 10–1 s–1 and with confining pressures from 0.1 to 85 MN m–2, at –11 ± 1°C. Below strain-rates of about 10–5 s–1 the confining pressure has little effect, but at higher strain-rates the confining pressure prevents cracking which allows the compressive strength to rise to a value greater than the unconfined compressive strength. At 1.4 ×10–2 s–1, the unconfined strength of 12 MN m–2 rises to 26 MN m–2 with a confining pressure of 25 MN m–2, before dropping slowly with greater confining pressures. Above 10–2 s–1 the unconfined strength decreases rapidly with increasing strain-rate, but the confined strength continues to increase. The dependence of strain rate on the maximum compressive stress is discussed.

Test Study on Strength Characteristics of Unsaturated Silt

2012 ◽  
Vol 204-208 ◽  
pp. 446-451
Author(s):  
Yu Lin Qian ◽  
Fei Yan Wang ◽  
Xiao Wei Li
Keyword(s):  
Internal Friction ◽  
Failure Modes ◽  
Great Influence ◽  
Friction Angle ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Angle Of Internal Friction ◽  
The Matrix ◽  
Effective Angle ◽  
Matrix Suction

A series of consolidation and drainage unsaturated triaxial tests on remolded samples were carried out at controlled matrix suction and confining pressure through automatic GDS triaxial apparatus. According to the shear strength of unsaturated silt, the results show the matrix suction has a little influence on effective angle of internal friction, while has great influence on failure modes and cohesion. With the increasing of matrix suction, stress-strain curves translate from hardening type to softening type, the effective angle of internal friction changes a little and is approximately equal to the effective angle of internal friction of saturated soil, cohesion is significantly improved. Matrix suction friction angle is not a constant, when the matrix suction is less than 100kPa, it decreases with matrix suction increasing, the rate of decrease reduces gradually; when matrix suction is greater than 100kPa, it tends to be a fixed value. The results are consistent to modified strength theory proposed by Fredlund.

scholarly journals Mechanical Characteristics of Coal Samples under Triaxial Unloading Pressure with Different Test Paths

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Yang Zhang ◽  
Yongjie Yang ◽  
Depeng Ma
Keyword(s):  
Axial Strain ◽  
Triaxial Compression ◽  
Axial Loading ◽  
Peak Stress ◽  
Friction Angle ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Compression Tests ◽  
Leading Role ◽  
Unloading Rate

In order to understand the influence of unloading path on the mechanical properties of coal, triaxial unloading confining pressure tests with different initial confining pressure and different unloading rate were carried out. The test results show that the triaxial unloading strength of coal samples under different test conditions is lower than conventional triaxial tests, but the brittleness characteristics are more obvious. This result indicates that the coal samples are easily damaged under unloading conditions. In the axial loading stage of the confinement unloading tests, the axial strain plays a leading role. However, during the confining pressure unloading stage, the circumferential deformation is large, which is the main deformation in this stage. Higher unloading rates of confining pressure are associated with shorter times between the peak stress position and sample complete failure. This shows that samples are more easily destroyed under higher unloading rates and the samples are more difficultly destroyed under lower unloading rates. In addition, with increasing unloading rate, the peak principal stress difference and confining pressure at failure decrease gradually, whereas the confining pressure difference at failure increases gradually. Compared with conventional triaxial compression tests, the cohesion of coal is reduced and the internal friction angle is increased under the condition of triaxial unloading test.

scholarly journals Influence of Soil Fabrics and Stress State on the Undrained Instability of Overconsolidated Binary Granular Assemblies

2018 ◽  
Vol 40 (2) ◽  
pp. 96-116 ◽  
Author(s):  
Youcef Mahmoudi ◽  
Abdellah Cherif Taiba ◽  
Leila Hazout ◽  
Wiebke Baille ◽  
Mostefa Belkhatir
Keyword(s):  
Friction Angle ◽  
Confining Pressure ◽  
Silty Sand ◽  
Triaxial Tests ◽  
Loading Conditions ◽  
Fines Content ◽  
Applied Loading ◽  
Granular Assemblies ◽  
Static Liquefaction ◽  
Confining Pressures

AbstractThe instability of saturated granular soils in field conditions generates drastic collapse in terms of runoff deformation because of its failing to sustain naturally applied loading conditions such as earthquakes, wave actions and vibrations. The objective of this laboratory investigation is to study the effects of the depositional methods, overconsolidation ratio (OCR) and confining pressure on the undrained instability shear strength of medium dense (Dr = 52%) sand–silt mixtures under static loading conditions. For this purpose, a series of undrained monotonic triaxial tests were carried out on reconstituted saturated silty sand samples with fines content ranging from 0% to 40%. Three confining pressures were used (P’c = 100, 200 and 300 kPa) in this research. The sand–silt mixture samples were prepared using two depositional methods, dry funnel pluviation (DFP) and wet deposition (WD), and subjected to two OCRs (1 and 2). The obtained instability lines and friction angles indicate that the funnel pluviated samples exhibit strain hardening compared to the wet deposited samples and that normally consolidated and overconsolidated wet deposited clean sandy samples were very sensitive to static liquefaction. The test results also indicate that the instability friction angle increases with the increase in the OCR expressing soil dilative character tendency increase. The instability friction angle decreases with the increase in the fines content for DFP and the inverse tendency was observed in the case of WD.

Sign in / Sign up

Export Citation Format

Share Document