Study on the Recycling of Waste Old Ship-Wood

2012 ◽  
Vol 260-261 ◽  
pp. 868-871
Author(s):  
Zhong Feng Zhang ◽  
Kai Huang ◽  
Jing Shu Gao
Keyword(s):  
Energy Conservation ◽  
Environmental Protection ◽  
Low Cost ◽  
Supply And Demand ◽  
Value Added ◽  
Emissions Reduction ◽  
Waste Wood ◽  
New Ideas

By introducing the supply and demand of China's wood resources, it summed up the necessity and problems of the recycling of waste wood. Then it presented that studying on the recycling of waste old ship-wood could provide new ideas for the recycling of waste wood. And then it in detail discussed that using which ways and means to achieve the efficient and high value-added recycling of waste old ship-wood on the premise of low-cost, green and environmental protection, and energy conservation and emissions reduction. And finally it pointed out that designers play key roles in the process of recycling waste wood and the recycling of waste wood has an expansive industrialization foreground which can boost the construction of “two-oriented society”.

Preparation of Carbon Source Doped in Polymer-Cement Filter and Research on Characteristic of Denitrification

2012 ◽  
Vol 602-604 ◽  
pp. 1294-1298
Author(s):  
Chun Bo Bi ◽  
Jian Guang Lin ◽  
Hai Yan Zhao
Keyword(s):  
Carbon Source ◽  
Polyvinyl Alcohol ◽  
Energy Conservation ◽  
Environmental Protection ◽  
Manufacturing Process ◽  
Low Cost ◽  
Methyl Cellulose ◽  
Potential Development ◽  
Long Time ◽  
Process Energy

Carbon source doped in polymer-cement were used for coating the filter of organic materials in even,gradient and embedded ways. Starch, hydroxypropyl methyl cellulose and polyvinyl alcohol had been selected and used for carbon source of denitrification.The filter advantage is the simple manufacturing process, energy conservation, environmental protection and low cost. We assay the condition of carbon source release in different filter and the experimental results show that the way of embedded carbon source doped in the filter is the optimal with longer lifetime and it can provide sufficient carbon source and be a long time for the growth of microorganism. The rate of denitrogenation can reach up to more than 70% having a great potential development.

scholarly journals Chitosan Adsorbent Derivatives for Pharmaceuticals Removal from Effluents: A Review

Macromol ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 130-154
Author(s):  
Efstathios V. Liakos ◽  
Maria Lazaridou ◽  
Georgia Michailidou ◽  
Ioanna Koumentakou ◽  
Dimitra A. Lambropoulou ◽  
...  
Keyword(s):  
Emerging Contaminants ◽  
Low Cost ◽  
Value Added ◽  
Ph Effects ◽  
Hydroxyl Groups ◽  
Research Papers ◽  
Natural Polysaccharide ◽  
Best Fitting ◽  
Isotherm And Kinetic Models ◽  
Published Research

Chitin is mentioned as the second most abundant and important natural biopolymer in worldwide scale. The main sources for the extraction and exploitation of this natural polysaccharide polymer are crabs and shrimps. Chitosan (poly-β-(1 → 4)-2-amino-2-deoxy-d-glucose) is the most important derivative of chitin and can be used in a wide variety of applications including cosmetics, pharmaceutical and biomedical applications, food, etc., giving this substance high value-added applications. Moreover, chitosan has applications in adsorption because it contains amino and hydroxyl groups in its molecules, and can thus contribute to many possible adsorption interactions between chitosan and pollutants (pharmaceuticals/drugs, metals, phenols, pesticides, etc.). However, it must be noted that one of the most important techniques of decontamination is considered to be adsorption because it is simple, low-cost, and fast. This review emphasizes on recently published research papers (2013–2021) and briefly describes the chemical modifications of chitosan (grafting, cross-linking, etc.), for the adsorption of a variety of emerging contaminants from aqueous solutions, and characterization results. Finally, tables are depicted from selected chitosan synthetic routes and the pH effects are discussed, along with the best-fitting isotherm and kinetic models.

Features and Construction of Prefabricated Buildings

2014 ◽  
Vol 580-583 ◽  
pp. 2262-2265
Author(s):  
Yu Hong Zhao
Keyword(s):  
Energy Saving ◽  
Environmental Protection ◽  
Industrial Production ◽  
Low Cost

Prefabricated buildings have the advantages of convenient construction, low cost, energy saving and environmental protection, etc., it is suitable for industrial production of buildings, lifting and connections of prefabricated components are key to construct the prefabricated buildings.

Value communication: low-cost marketing initiatives for “Guru Ki Bani 58282”

2013 ◽  
Vol 3 (3) ◽  
pp. 1-9
Author(s):  
Neeraj Pandey ◽  
Gaganpreet Singh
Keyword(s):  
Interactive Voice Response ◽  
Low Cost ◽  
Value Added ◽  
Subject Area ◽  
Marketing Management ◽  
Digital Marketing ◽  
Content Type ◽  
Mba Students ◽  
Marketing Team ◽  
Value Communication

Subject area Pricing, digital marketing, marketing management and strategic marketing. Study level/applicability The case can be used for pricing or digital marketing courses as well as marketing management courses to MBA students and/or for management development programmes. Case overview Goldfinch Mobile Solutions, a Hong-Kong based value added services (VAS) and gaming platform provider, had an exclusive tie up with Bharti Airtel in India for providing value added voice applications on an interactive voice response system (IVRS) platform. The Goldfinch flagship service is “Guru Ki Bani” which may be subscribed to by dialing the short code 58282. This “58282” service has a repository of all Sikh religion daily prayers, religious songs, teachings, stories from Guru's life and similar information that is derived from the Sikh Holy book Guru Granth Sahib Ji. As per mutual agreement between Goldfinch Mobile Solutions and Bharti Airtel, the telecom operator had the responsibility to promote Goldfinch's Guru Ki Bani service amongst its subscriber base through its below the line (BTL) promotional channels such as short messaging service (SMS), outbound calls, cell information, notification SMS after call and above the line (ATL) activities such as posters, leaflets, print, promoters, regional TV, outdoors, etc. The revenue sharing arrangement between Airtel and Golfinch was in the ratio of 75 percent and 25 percent. However, with recent changes in the policies of Telephone Regulatory Authority of India (TRAI), promotional marketing used by telecom operators has been constrained. Declining customer share, decreasing profits (after Bharti Airtel halted promotions) and increasing organization cost per customer have made MD and CEO Mr Newton Bubber think of various options including low-cost marketing initiatives besides digital marketing to promote Guru Ki Bani services. Value communication to its huge potential customer base, i.e. 184.19 million Bharti Airtel subscribers was another challenge facing Mr Newton and his marketing team at Goldfinch. Expected learning outcomes The case enables students to learn the concepts and application of value creation, effective value communication, price waterfall analysis, importance of costing parameters in pricing decisions, low-cost marketing strategies and digital marketing. Supplementary materials Teaching notes are available for educators only. Please contact your library to gain login details or email [email protected] to request teaching notes.

Lignin-based polymers

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Fan Qi ◽  
Zhang Chaoqun ◽  
Yang Weijun ◽  
Wang Qingwen ◽  
Ou Rongxian
Keyword(s):  
High Performance ◽  
Raw Materials ◽  
Structural Characteristics ◽  
Low Cost ◽  
Polymer Matrices ◽  
Terrestrial Plants ◽  
Polyester Resins ◽  
Sustainable Resources ◽  
Reinforced Polymer ◽  
New Ideas

Abstract On the basis of the world’s continuing consumption of raw materials, there was an urgent need to seek sustainable resources. Lignin, the second naturally abundant biomass, accounts for 15–35% of the cell walls of terrestrial plants and is considered waste for low-cost applications such as thermal and electricity generation. The impressive characteristics of lignin, such as its high abundance, low density, biodegradability, antioxidation, antibacterial capability, and its CO2 neutrality and enhancement, render it an ideal candidate for developing new polymer/composite materials. In past decades, considerable works have been conducted to effectively utilize waste lignin as a component in polymer matrices for the production of high-performance lignin-based polymers. This chapter is intended to provide an overview of the recent advances and challenges involving lignin-based polymers utilizing lignin macromonomer and its derived monolignols. These lignin-based polymers include phenol resins, polyurethane resins, polyester resins, epoxy resins, etc. The structural characteristics and functions of lignin-based polymers are discussed in each section. In addition, we also try to divide various lignin reinforced polymer composites into different polymer matrices, which can be separated into thermoplastics, rubber, and thermosets composites. This chapter is expected to increase the interest of researchers worldwide in lignin-based polymers and develop new ideas in this field.

scholarly journals Catalytic Hydrogenation, Hydrodeoxygenation, and Hydrocracking Processes of a Lignin Monomer Model Compound Eugenol over Magnetic Ru/C–Fe2O3 and Mechanistic Reaction Microkinetics

Catalysts ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 425 ◽  
Author(s):  
Ana Bjelić ◽  
Miha Grilc ◽  
Sašo Gyergyek ◽  
Andraž Kocjan ◽  
Darko Makovec ◽  
...  
Keyword(s):  
Model Compound ◽  
Annealing Temperature ◽  
Low Cost ◽  
Value Added ◽  
Product Distribution ◽  
Surface Chemical ◽  
Annealing Temperatures ◽  
Microkinetic Model ◽  
Highly Active ◽  
Commercial Carbon

Conversion of waste lignocellulosic (LC) biomass, a widely-available low-cost feedstock, into value-added biobased chemicals (and biofuels) has been gaining much attention recently. Therefore, the present lignin valorisation study was aimed at developing magnetically-separable highly-active catalysts for hydrodeoxygenation (HDO), also proposing surface chemical kinetics. Five carbonaceous substrate-deposited Ru were synthesised and tested for the HDO of monomer moiety eugenol. Their annealing temperatures differed, specifically between 300 and 750 °C, while one was not subjected to calcination. Experiments revealed the substantial influence of annealing temperature on the product distribution. Namely, fresh nonannealed nanocomposites were not active for hydrogenolysis. By further pretreatment increase, hydrogenation and, exclusively, the deoxygenation of saturated cyclic species, were enhanced, these being more promoted considering rates and yields than commercial carbon-supported ruthenium. Over 80 mol% of 4-propyl-cylohexanol and propyl-cyclohexane could be formed over the samples, treated at 500 and 600 °C, for 100 and 125 min, respectively, under 275 °C and 5 MPa of reactor hydrogen pressure. Interestingly, a notable 4-propyl-phenol amount was produced upon 750 °C pretreating. The intrinsic microkinetic model, developed previously, was applied to determine relevant turnover parameters. Calculated modelling results indicated a 47- and 10-fold greater demethoxylation and dehydroxylation mechanism ability upon the reheatingpreheating at 600 °C in comparison to industrial (heterogeneous) Ru/C.

Sign in / Sign up

Export Citation Format

Share Document