Study on Test of DMB-T Signal Based on Software Defined Radio Technique

2013 ◽  
Vol 303-306 ◽  
pp. 835-838
Author(s):  
Shan Shan Li ◽  
Jian Zhou
Keyword(s):  
Virtual Instrument ◽  
Software Defined Radio ◽  
Block Diagram ◽  
Test System ◽  
System Structure ◽  
Digital Television ◽  
Single Function ◽  
Broadcasting System ◽  
Speed Up ◽  
Hardware Circuit

With the release of the standard, digital television terrestrial broadcasting is being gradually extended in many places. In order to speed up the extension and the application, also to evaluate the existing digital television terrestrial broadcasting system, we need a easy-to-use signal analysis and measurement system. The traditional signal measurement method is through the special hardware circuit to realize, but that method is high cost, and the system structure is complex and single function. To improve the flexibility of the system , we realize the system based on virtual instrument technology. In hardware section, this thesis described the block diagram of the system and the introduction of the NI vector signal analyzer. In software part, this thesis described the overall test system based on LabVIEW and the realization of the system features multi-threading, each step of synchronization signals achieved. The image Fig. 3 and Fig. 4 show the result of this system test software system.

Design of Monitoring System for Frequency Converter Sets Based on PCI Bus

2011 ◽  
Vol 128-129 ◽  
pp. 1409-1412
Author(s):  
Xin Yu Yang ◽  
Pei Yuan Cheng ◽  
Xiao Quan Li
Keyword(s):  
Monitoring System ◽  
Virtual Instrument ◽  
High Speed ◽  
High Reliability ◽  
Frequency Converter ◽  
Test System ◽  
Pci Bus ◽  
Turbo Generator ◽  
The Status ◽  
Hardware Circuit

It is difficult to finish fully and professional testing about frequency converter sets when it was broken or repaired. Aimed at this problem, monitoring system for frequency converter sets is designed. Its hardware circuit is based on IPC platform and PCI bus and software platform is based on Visual Basic and VI (Virtual instrument) technology. It can finish controlling the work status and checking voltage, power etc. and temperature of key parts real-time about the set. Simultaneously it can give an alarm when the status is abnormal. Its results has characteristics of high reliability, high speed and intuitionistic. So it can improve efficiency of test system maximum and save repair expenditure. The system helps for improving reliability of gas turbo-generator set and power quality.

Research and Design of Networked Virtual Instrument Electronic Test System

2012 ◽  
Vol 241-244 ◽  
pp. 66-69
Author(s):  
Yang Zhou ◽  
Ye Li ◽  
Wei Bo Li
Keyword(s):  
Virtual Instrument ◽  
Resource Sharing ◽  
Test Site ◽  
Test System ◽  
System Structure ◽  
Website Design ◽  
Network Function ◽  
Electronic Measurement ◽  
Database Technology ◽  
And Control

A novel virtual instrument operated on different computers, peripherals, measured node and databases connecting to the network based on network and database technology is proposed to achieve resource sharing by using of the virtual instrument electronic test system (VIETS) developed by Jilin University. Users can not only remotely control the instrument measurement, collection, analysis and processing data, but also conveniently monitor the test site, which benefit to the foundation for setting up networked virtual electronic measurement laboratory. A mixed-mode of C/S (client/server) and B/S (browser/server) and a system structure include user client, internet, server, client device and measurement and control equipment was presented. Network function was also achieved by using of LabVIEW, MyEclipse, MySQL and other technologies to accomplish the database design, server management website design and the communication. Thus users can remotely both monitor and control the test instruments through the network function of VIETS.

Fault Diagnosis Expert System for Electric Power System of the Large-Scale UAVs Based on Virtual Instrument

2013 ◽  
Vol 663 ◽  
pp. 572-579 ◽  
Author(s):  
Qin Ling Zhang ◽  
Yang Liu ◽  
Peng Liang Sun
Keyword(s):  
Fault Diagnosis ◽  
Expert System ◽  
Power System ◽  
Virtual Instrument ◽  
Power Distribution ◽  
Large Scale ◽  
Expert Knowledge ◽  
Test System ◽  
Electric Power System ◽  
System Structure

In this paper, a test system hardware platform based on PXI bus system is proposed to test the airborne power system and typical power distribution structure of large-scale Unmanned aerial vehicles (UAV). By researching system structure, analyzing failure mode and designing fault tree, fault diagnosis expert system is designed to test the airborne power system in large-scale UAVs, where a forward reasoning expert knowledge base based on extension rule is built to solve the non-exact inference in complex system via introducing certainty factor. The experiments illustrate that the proposed system can effectively improve the intelligent level of test system and has good application prospects.

Study on Common Ground Testing Platform Technology for Telemetry Core Equipment

2012 ◽  
Vol 220-223 ◽  
pp. 1472-1475
Author(s):  
Qiu Lin Tan ◽  
Xiang Dong Pei ◽  
Si Min Zhu ◽  
Ji Jun Xiong
Keyword(s):  
Data Exchange ◽  
Common Ground ◽  
Digital Signal ◽  
Test System ◽  
Automatic Test System ◽  
Module Design ◽  
The Status ◽  
Output Module ◽  
And Performance ◽  
Hardware Circuit

On the basis of automatic test system of the status in domestic and foreign, by analysis of the various functions and performance of the integrated test system, a design of the integrated test system is proposed, FPGA as the core logic controller of the hardware circuit. The system of the hardware design include: digital signal source output modules, analog output module and PCM codec module. Design of hardware circuit are mainly described. In addition, a detailed analysis of some key technologies in the design process was given. Overall, its data exchange with host computer is through the PCI card, data link and bandwidth can be expanded in accordance with the actual needs. The entire system designed in the modular principle, which has a strong scalability.

Research and Design on Monitoring System of Simple Bridge Based on Virtual Instrument Technology

2012 ◽  
Vol 490-495 ◽  
pp. 2624-2627
Author(s):  
Hua Wen Zheng ◽  
Liu Chang ◽  
Chuan Hui Wu ◽  
Yu Liang
Keyword(s):  
Monitoring System ◽  
Virtual Instrument ◽  
Analysis Data ◽  
System Structure ◽  
Time Data ◽  
Bridge Monitoring ◽  
Instrument Technology ◽  
Software And Hardware ◽  
Bridge Monitoring System ◽  
Research And Design

Design of a monitoring system based on virtual instrument technology for a simple bridge. This paper discusses the bridge monitoring system structure, software and hardware. The system can realize functions such as data acquisition, real-time data display, online analysis, offline analysis, data management and so on. Therefore, the monitoring system can be applied to a variety of bridges. The presented monitoring system has an important guidance meaning and practical value for bridge monitoring.

Industry 4.0 Digital Technologies for data collection and control

2021 ◽  
pp. 43-58
Author(s):  
S. S. Yudachev ◽  
P. A. Monakhov ◽  
N. A. Gordienko
Keyword(s):  
Data Collection ◽  
Open Source ◽  
Software Defined Radio ◽  
Block Diagram ◽  
Data Access ◽  
Gnu Radio ◽  
Time Data ◽  
Object A ◽  
Data Propagation ◽  
And Control

This article describes an attempt to create open source LabVIEW software, equivalent to data collection and control software. The proposed solution uses GNU Radio, OpenCV, Scilab, Xcos, and Comedi in Linux. GNU Radio provides a user-friendly graphical interface. Also, GNU Radio is a software-defined radio that conducts experiments in practice using software rather than the usual hardware implementation. Blocks for data propagation, code deletion with and without code tracking are created using the zero correlation zone code (ZCZ, a combination of ternary codes equal to 1, 0, and –1, which is specified in the program). Unlike MATLAB Simulink, GNU Radio is open source, i. e. free, and the concepts can be easily accessed by ordinary people without much programming experience using pre-written blocks. Calculations can be performed using OpenCV or Scilab and Xcos. Xcos is an application that is part of the Scilab mathematical modeling system, and it provides developers with the ability to design systems in the field of mechanics, hydraulics and electronics, as well as queuing systems. Xcos is a graphical interactive environment based on block modeling. The application is designed to solve problems of dynamic and situational modeling of systems, processes, devices, as well as testing and analyzing these systems. In this case, the modeled object (a system, device or process) is represented graphically by its functional parametric block diagram, which includes blocks of system elements and connections between them. The device drivers listed in Comedi are used for real-time data access. We also present an improved PyGTK-based graphical user interface for GNU Radio. English version of the article is available at URL: https://panor.ru/articles/industry-40-digital-technology-for-data-collection-and-management/65216.html

scholarly journals Integrated Durability of Automobile Alternator Test System Design Based on LabVIEW

2014 ◽  
Vol 8 (1) ◽  
pp. 839-845 ◽  
Author(s):  
Wu Weibin ◽  
Feng Yue ◽  
Du Junyi ◽  
Xu Pengbo ◽  
Feng Yunlin ◽  
...  
Keyword(s):  
Data Acquisition ◽  
Automotive Industry ◽  
Virtual Instrument ◽  
Measurement Errors ◽  
High Speed ◽  
Performance Test ◽  
Test System ◽  
Electrical Performance ◽  
Durability Test ◽  
Limit Test

New standards in the automotive industry highlighted the situation of the actual operation of the alternator and a variety of harsh environment simulation limit test. Using new standards in the automotive industry as a guide, this article presents a virtual instrument based on the durability of automobile generator integrated test system. The design adopt virtual instrument technology in designing the system, Graphic language, LabVIEW is applied in writing measure-control program. The system uses a lot of features on LABVIEW, including Data acquisition, control of serials port, etc. Test implementation uses the host computer via RS232 and RS485 communication port and the data acquisition card, NI PCI- 6221, to control the frequency hybrid motor, temperature control box, electronic loads and other intelligent devices, and to simulate a variety of automotive alternator working conditions and real-time monitoring to monitor the status of generators. Using this system, two separate automobile alternators can be tested in terms of high-speed vehicle impact and high temperature durability test and electrical performance test and other tests at the same time. As a result, the generator speed measurement error is within 1%, the control error is within 2%, voltage and current measurement errors were within 0.5% and 0.4%, which meets the requirements.

A Realization Method of Sound Gathering and Broadcasting System Based on TMS320VC5416DSP

2011 ◽  
Vol 71-78 ◽  
pp. 3110-3113
Author(s):  
Shi Sheng Jia ◽  
Mao Ying Zhou
Keyword(s):  
High Grade ◽  
Digital Audio ◽  
Serial Port ◽  
Audio Signals ◽  
Control Center ◽  
Control Interface ◽  
Chip Processing ◽  
Broadcasting System ◽  
Hardware Circuit ◽  
Code Standard

The sound gathering and broadcasting system in which the TMS320VC5416 is as the control center, the TLV320AIC23 as the codec and G.711 as coding standard is presented in this paper. The composition of the system, the design of the hardware circuit and the programming method of the software are proposed. The configuration mode of the Multichannel Buffered Serial Port (McBSP0 and McBSP1) of TMS320VC5416 and that of the control interface and the digital audio interface of the codec chip TLV320AIC23 are determined. The system realizes the storage and transmission of the digit audio signals well and obtains a high grade effect in time, with DSP chip processing the digit audio signals by means of the G.711 code standard.

Sign in / Sign up

Export Citation Format

Share Document