Study on Combing Machine Based on Promotion Display Materials

2013 ◽  
Vol 340 ◽  
pp. 21-24
Author(s):  
Xuan Ren

The comber equipment is essential for high-count yarn textile of the enterprises spun. It is an effective means to enhance the quality of the yarn, to adjust the industrial structure, to increase the added value of yarn, and to enhance the competitiveness. Currently, there is a gap between the domestic combers with world leading level. The article describes the technical characteristics of the domestic high-speed Comber and technological innovation, and focuses its network promotion display and the application.

2021 ◽  
Vol 275 ◽  
pp. 01003
Author(s):  
Yuanyuan Cao

The opening of high-speed rail has a great role in promoting regional economy. Many scholars have used prefecture-level cities across the country as samples to prove that the opening of high-speed rail can stimulate economic growth and reduce environmental pollution. However, the heterogeneity between regions may make the result no longer significant in a particular region. Therefore, this article uses the data of 17 prefecture-level cities in Henan Province as an example to explore the economic and environmental effects of the opening of high-speed rail in Henan Province, and study one of the mechanisms by which high-speed rail acts on the environment. The results prove that the opening of high-speed rail has a significant positive effect on the economic and environmental quality of cities in Henan Province. In addition, high-speed rail can also improve the environment by adjusting the industrial structure, reducing pollutant emissions, and improving environmental quality.


Author(s):  
O. Filonchik

The successful promotion of the product nowadays the manufacturer must meet all the strict requirements of the consumer in the quality of the products. At OJSC «BSW – Management Company of Holding «BMC» the centerless turning unit was put into operation, which allowed the company to manufacture a new type of product with a higher added value. This is a mechanically processed rod with a diameter of 19–79 mm and with a tolerance of a diameter of IT9. As a result of the work done, the optimum cutting regime for the centerless turning unit was determined using a rod of diameter 80 of 42CrMo4 alloy steel.


Land ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 724
Author(s):  
Alicja K. Zawadzka

The paper presents the results of a study on the attractiveness to tourists and natives of the cultural qualities of coastal towns on The Pomeranian Way of St. James that are members of the Cittaslow network. Attention to the quality of urban life is inscribed in the development policies of towns applying to join the Cittaslow movement. In order to join the network (apart from the size criterion), towns need to meet a minimum of 50% plus one of the 72 criteria grouped into seven categories. One of the category is Quality of Urban Life Policy, so the towns applying to join Cittaslow commit themselves to actions aimed at improving the quality of urban life. The study on the attractiveness of cultural qualities of towns to tourists and natives was conducted using the author’s BRB method, whose added value is its universality and the possibility to study small towns regardless of their membership in the Cittaslow network. BRB is an acronym that stands for BUILDINGS, RELATIONSHIPS, BALANCE, and comprises three scopes of activities: BUILDINGS (iconic building and important sites where the inhabitants and the tourists are present); RELATIONSHIPS (the visual effects of the relations between the inhabitants and the town) and BALANCE (solutions that implement modern technologies). This method enables identification of places that are important to the inhabitants, where urban life takes place and which are often created with the involvement of the inhabitants. These are often the same spaces as those that attract tourists and perhaps stimulate them the desire to visit the town again (BRB—be right back). The aim of the BRB method is shown the attractiveness of small towns. The study has shown that the characteristic feature of Polish Cittaslow towns is their diversity: the architectural attractiveness of three towns is high both to tourists and natives. On the other hand, the urban attractiveness of the examined towns is an insufficient.


Mathematics ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 864
Author(s):  
Qingzheng Xu ◽  
Na Wang ◽  
Lei Wang ◽  
Wei Li ◽  
Qian Sun

Traditional evolution algorithms tend to start the search from scratch. However, real-world problems seldom exist in isolation and humans effectively manage and execute multiple tasks at the same time. Inspired by this concept, the paradigm of multi-task evolutionary computation (MTEC) has recently emerged as an effective means of facilitating implicit or explicit knowledge transfer across optimization tasks, thereby potentially accelerating convergence and improving the quality of solutions for multi-task optimization problems. An increasing number of works have thus been proposed since 2016. The authors collect the abundant specialized literature related to this novel optimization paradigm that was published in the past five years. The quantity of papers, the nationality of authors, and the important professional publications are analyzed by a statistical method. As a survey on state-of-the-art of research on this topic, this review article covers basic concepts, theoretical foundation, basic implementation approaches of MTEC, related extension issues of MTEC, and typical application fields in science and engineering. In particular, several approaches of chromosome encoding and decoding, intro-population reproduction, inter-population reproduction, and evaluation and selection are reviewed when developing an effective MTEC algorithm. A number of open challenges to date, along with promising directions that can be undertaken to help move it forward in the future, are also discussed according to the current state. The principal purpose is to provide a comprehensive review and examination of MTEC for researchers in this community, as well as promote more practitioners working in the related fields to be involved in this fascinating territory.


2017 ◽  
Vol 09 (05) ◽  
pp. 1750064 ◽  
Author(s):  
A. Van Hirtum ◽  
X. Pelorson

Experiments on mechanical deformable vocal folds replicas are important in physical studies of human voice production to understand the underlying fluid–structure interaction. At current date, most experiments are performed for constant initial conditions with respect to structural as well as geometrical features. Varying those conditions requires manual intervention, which might affect reproducibility and hence the quality of experimental results. In this work, a setup is described which allows setting elastic and geometrical initial conditions in an automated way for a deformable vocal fold replica. High-speed imaging is integrated in the setup in order to decorrelate elastic and geometrical features. This way, reproducible, accurate and systematic measurements can be performed for prescribed initial conditions of glottal area, mean upstream pressure and vocal fold elasticity. Moreover, quantification of geometrical features during auto-oscillation is shown to contribute to the experimental characterization and understanding.


BMJ Open ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. e039517
Author(s):  
Gaurav Jyani ◽  
Shankar Prinja ◽  
Sitanshu Sekhar Kar ◽  
Mayur Trivedi ◽  
Binod Patro ◽  
...  

IntroductionQuality-adjusted life year (QALY) has been recommended by the government as preferred outcome measure for Health Technology Assessment (HTA) in India. As country-specific health-related quality of life tariff values are essential for accurate measurement of QALYs, the government of India has commissioned the present study. The aim of this paper is to describe the methods for the Development of an EQ-5D Value set for India using an Extended design (DEVINE) Study. Additionally, this study aspires to establish if the design of 10-time trade-off (TTO) blocks is enough to generate valid value sets.Methods and analysisA cross-sectional survey using the EuroQol Group’s Valuation Technology (EQ-VT) will be undertaken in a sample of 2700 respondents selected from six different states of India using a multistage stratified random sampling technique. The participants will be interviewed using computer-assisted personal interviewing technique. The TTO valuation will be done using 10 composite TTO (c-TTO) tasks and 7 discrete choice experiment (DCE) tasks. Hybrid modelling approach using both c-TTO and DCE data to estimate the potential value set will be applied. Values of all 3125 health states will be predicted using both the conventional EQ-VT design of 10 blocks of 10 TTO tasks, and an extended design of 18 blocks of 10 TTO tasks. The potential added value of the eight additional blocks in overall validity will be tested. The study will deliver value set for India and assess the adequacy of existing 10-blocks design to be able to correctly predict the values of all 3125 health states.Ethics and disseminationThe ethical approval has been obtained from Institutional Ethics Committee of PGIMER, Chandigarh, India. The anonymised EQ-5D-5L value set will be available for general use and in the HTAs commissioned by India’s central HTA Agency.


2017 ◽  
Vol 45 (12) ◽  
pp. 1298-1316 ◽  
Author(s):  
Magali Jara ◽  
Gérard Cliquet ◽  
Isabelle Robert

Purpose The purpose of this paper is to tackle the issue of store brand equity by considering two store brand’s positioning strategies: those with high perceived added value (the organic store brands), as opposed to economic brands. It takes place in the current environmental considerations showing the important role played by the packaging in determining the store brand equity. Design/methodology/approach A PLS Path model divided into four sub-models enables the authors to make specific predictions about customers’ purchase intentions. It also provides a concise operational calculation of the brand equity of each studied store brand. Findings Results show that economic brands build their equity with reinforced packaging, and organic brands maximise their brand equity by using simple packaging. In general, reinforced packaging improves the perceived quality of economic store brands but destroys that of organic brands. The calculations of overall equity scores for each studied store brand reveal that economic brands could benefit from further development whilst organic brands already maximise their equity. Practical implications Results will enable large retailers to develop effective campaigns focussing on perceived quality and more specifically by designing packaging that are suitable for the positioning of their brands – a simple packaging for organic brands and a reinforced packaging for economic brands to maximise customers’ value. Originality/value This is one of the first studies to deepen the store brand equity, comparing two contrasting types of brands, by studying specifically variations of the levels of customers’ perceived quality depending of two types of packaging.


Author(s):  
Adel Abidi ◽  
Sahbi Ben Salem ◽  
Mohamed Athmane Yallese

Among advanced cutting methods, High Speed Milling (HSM) is often recommended to improve the productivity and to reduce the costs of machining parts. As every cutting process, HSM is characterized by some defects like surface roughness and delamination are the main defects generated in composite materials. The aim of this experimental work is the studying of the machining quality of woven Carbon fiber reinforced plastics (CFRP) using the HSM technology. Experiments were done using different machining parameters combinations to make opened holes in CFRP laminates. This study investigated the effect of cutting speed, orbital feed speed, hole diameter on the delamination defect and surface roughness responses generated in the drilled holes. The design of experimental tests was generated using the approach of Central Composite Design (CCD). The characterization of these responses was treated with the Analysis of variance (ANOVA) and Response surface methodology (RSM). Results showed that the surface roughness is highly affected by the orbital feed speed (F) with contribution of 22.45%. The delamination factor at entry and exit of holes is strongly influenced by the hole diameter D (25.97% and 57.43%) respectively. The developed model equations gave a good correlation between the empirical and predicted results. The optimization of the milling parameters was treated using desirability function to minimize the surface roughness (Ra) and the delamination factor simultaneously.


Sign in / Sign up

Export Citation Format

Share Document