The Effective Use of Renewable Energy Sources and Advanced Technology of Environment Systems in Public Buildings

2013 ◽  
Vol 361-363 ◽  
pp. 382-385
Author(s):  
Marek Kušnír ◽  
Danica Košičanová ◽  
František Vranay

Nowadays, choosing of heating source is emphasized. On the market there are different types of heat sources, which need to be properly designed to the required heating output. Finally, it is necessary to take into account the possibilities of fuel burning as well as heat transfer substance. Heating system is dependent on regional weather conditions, where the building is located. All these factors ultimately, with proper design of the heat source, could reduce operating costs in the heating season. Currently in the design of the heating system, there are taken into account the greatest possible energy savings. It is therefore to encourage bigger utilization of renewable energy sources.Currently has the highest proportion of total energy consumption in the buildings, energy for heating. For this reason, the expert and research community seeks to reduce energy consumption at the lowest possible value. For this purpose, people are starting to apply renewable energy sources. These devices using renewable energy sources convert energy from the environment. Most of them are transforming energy from the sun, earth, water and air. This energy is then used directly for heating. In this article we will more closely deal with transforming solar energy into electricity using photovoltaic panels and we will focus on the interaction between the photovoltaic system and heating and cooling system, under certain conditions. Produced electric energy is used for heating system in the school building in Spišská Nová Ves in Slovakia.

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7457
Author(s):  
Joanna Kisielińska ◽  
Monika Roman ◽  
Piotr Pietrzak ◽  
Michał Roman ◽  
Katarzyna Łukasiewicz ◽  
...  

The primary aim of this study was to assess and compare EU countries in terms of the use of renewable energy sources in road transport. The following research tasks were undertaken to realize this aim: (1) a review of the literature concerning the negative externalities in road transport, the concept of sustainable development, and legal regulations referring to the utilization of renewable energy sources; (2) presentation of changes in energy consumption (both traditional and renewable) in road transport in EU countries in the years 2008–2019; and (3) identification of leaders among the EU countries in terms of consumption of renewable energy sources in road transport. The aim and tasks were realized using the literature review and TOPSIS method as well as descriptive, tabular, and graphic methods. The analysis was conducted for 28 EU countries according to the status for 2019. The period of 2008–2019 was investigated. Sources of materials included literature on the subject and Eurostat data. Although renewable energy sources accounted for as little as 6% of total energy consumption in road transport in EU countries in 2019, this is a significant topical issue. It results from the direction in which changes need to be implemented in terms of energy generation in this area of human activity. It turned out that blended biodiesel and blended biogasoline were the most commonly used fuels originating from renewable sources. The application of the TOPSIS method resulted in the identification of five groups of EU member countries, which differed in terms of the degree of utilization of renewable energy sources in road transport. Luxemburg, Sweden, and Austria were leaders in this respect. In turn, Malta, Estonia, and Croatia were characterized by very low consumption of renewable energy. The greatest progress in the utilization of renewable energy sources in road transport was recorded in Sweden, Finland, and Bulgaria (changes in the relative closeness to the ideal solution from 0.15 to 0.27), while the greatest reduction in relation to other countries was observed in Austria, Germany, and Lithuania (changes from −0.35 to −0.22).


Author(s):  
Juliana Monteiro Lopes ◽  
Ilton Curty Leal Junior ◽  
Vanessa De Almeida Guimarães

Currently, concerns with sustainable development lead organizations to improve their production processes in order to reduce greenhouse gases emission and energy consumption. Since the bioethanol supply chain is a CO2 emitter and depends on several energy sources, it becomes important to analyze how to improve this chain regarding environmental issues. Thus, this paper presents a comparative study of scenarios with bioethanol supply chain configurations which use different modal alternatives and renewable energy in all its mid-stages. The analysis was based on LCA (life cycle analysis) concepts and in a partial application of LCI (life cycle inventory), so that we can identify which of these scenarios is most appropriate in terms of lower total energy consumption, greater share of renewable energy use and lower CO2 emissions. Based on concepts found in the bibliographic research, the methodology used and the data collected from documental research, this paper analyzes the supply chain that begins with sugarcane plantation and bioethanol production in the south central region of Brazil with destination to export. Based on the results, we concluded that it is possible to improve the performance of the supply chain in environmental terms with a combination of renewable energy sources and modes of transport that are more suitable to the product studied.


2021 ◽  
Vol 295 ◽  
pp. 04004
Author(s):  
Dmitry Budnikov

Currently, the power supply of agricultural enterprises should be designed considering not only the required installed capacity but also the peculiarities of production. Thus, the presence of livestock operations implies waste, the disposal of which entails costs. At the same time, feed preparation, including drying of fodder grain is associated with significant energy costs. Thus, the availability of biogas equipment will allow the synthesis of utilization technologies in the form of processing into biogas and the energy supply of equipment to carry out drying. At the same time, attention should be paid to technologies with reduced energy consumption for technological processes. For example, microwave convective or infrared convective drying of grain. These technologies have a reduced energy consumption for moisture removal, but the installed capacity of the equipment is higher than in traditional technologies. This work is aimed at investigating the ratio of heat and electric energy expended in the process of microwave convective drying and the choice of possible renewable energy sources for the implementation of technological operations. Considering that drying of grain is mainly carried out during the harvesting period before storing, it allows considering energy equipment as a source of thermal energy in the cold period, when drying is not required.


Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 332
Author(s):  
Janusz Grabara ◽  
Arsen Tleppayev ◽  
Malika Dabylova ◽  
Leonardus W. W. Mihardjo ◽  
Zdzisława Dacko-Pikiewicz

In this contemporary era, environmental problems spread at different levels in all countries of the world. Economic growth does not just depend on prioritizing the environment or improving the environmental situation. If the foreign direct investment is directed to the polluting industries, they will increase pollution and damage the environment. The purpose of the study is to consider the relationship between foreign direct investment in Kazakhstan and Uzbekistan and economic growth and renewable energy consumption. The study is based on data obtained from 1992 to 2018. The results show that there is a two-way link between foreign direct investment and renewable energy consumption in the considered two countries. The Granger causality test approach is applied to explore the causal relationship between the variables. The Johansen co-integration test approach is also employed to test for a relationship. The empirical results verify the existence of co-integration between the series. The main factors influencing renewable energy are economic growth and electricity consumption. To reduce dependence on fuel-based energy sources, Kazakhstan and Uzbekistan need to attract energy to renewable energy sources and implement energy efficiency based on rapid progress. This is because renewable energy sources play the role of an engine that stimulates the production process in the economy for all countries.


Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1570
Author(s):  
Tomasz Rokicki ◽  
Aleksandra Perkowska ◽  
Bogdan Klepacki ◽  
Piotr Bórawski ◽  
Aneta Bełdycka-Bórawska ◽  
...  

The paper’s main purpose was to identify and present the current situation and changes in energy consumption in agriculture in the European Union (EU) countries. The specific objectives were the determination of the degree of concentration of energy consumption in agriculture in the EU countries, showing the directions of their changes, types of energy used, and changes in this respect, establishing the correlation between energy consumption and changes in the economic and agricultural situation in the EU countries. All member states of the European Union were deliberately selected for research on 31 December 2018 (28 countries). The research period covered the years 2005–2018. The sources of materials were the literature on the subject, and data from Eurostat. Descriptive, tabular, and graphical methods were used to analyze and present materials, dynamics indicators with a stable base, Gini concentration coefficient, concentration analysis using the Lorenz curve, coefficient of variation, Kendall’s tau correlation coefficient, and Spearman’s rank correlation coefficient. A high concentration of energy consumption in agriculture was found in several EU countries, the largest in countries with the largest agricultural sector, i.e., France and Poland. There were practically no changes in the concentration level. Only in the case of renewable energy, a gradual decrease in concentration was visible. More and more countries developed technologies that allow the use of this type of energy. However, the EU countries differed in terms of the structure of the energy sources used. The majority of the basis was liquid fuels, while stable and gaseous fuels were abandoned in favor of electricity and renewable sources—according to which, in the EU countries, the research hypothesis was confirmed: a gradual diversification of energy sources used in agriculture, with a systematic increase in the importance of renewable energy sources. The second research hypothesis was also confirmed, according to which the increase in the consumption of renewable energy in agriculture is closely related to the economy’s parameters. The use of renewable energy is necessary and results from concern for the natural environment. Therefore, economic factors may have a smaller impact.


2021 ◽  
Vol 19 ◽  
pp. 205-210
Author(s):  
Milan Belik ◽  

This project focuses on optimisation of energy accumulation for various types of distributed renewable energy sources. The main goal is to prepare charging – discharging strategy depending on actual power consumption and prediction of consumption and production of utilised renewable energy sources for future period. The simulation is based on real long term data measured on photovoltaic system, wind power station and meteo station between 2004 – 2021. The data from meteo station serve as the input for the simulation and prediction of the future production while the data from PV system and wind turbine are used either as actual production or as a verification of the predicted values. Various parameters are used for trimming of the optimisation process. Influence of the charging strategy, discharging strategy, values and shape of the demand from the grid and prices is described on typical examples of the simulations. The main goal is to prepare and verify the system in real conditions with real load chart and real consumption defined by the model building with integrated renewable energy sources. The system can be later used in general installations on commercial or residential buildings.


2021 ◽  
Vol 2021 (6) ◽  
pp. 5312-5316
Author(s):  
MIROSLAV RIMAR ◽  
◽  
MARCEL FEDA ◽  
ANDRII KULIKOV ◽  
MILAN ABRAHAM ◽  
...  

The purpose of currently contribution is to analyse and compare effectivity of cogeneration unit in each summer and winter season. The main idea of combined heat and energy production is to reduce usage of primary fuels and with that connected reduction of pollutions due to the integration of renewable energy sources and with regard to the natural environment. Presented contribution is dedicated on issue on the operation of a cogeneration unit integrated in central heating system.


2018 ◽  
Vol 19 (12) ◽  
pp. 66-74
Author(s):  
Marcin Chrzan ◽  
Daniel Pietruszczak ◽  
Mirosław Wiktorowski

The paper presents issues related to renewable energy sources and their current use. Home photovoltaic installations RES and their types are discussed. It presents the benefits that a basic household can derive from it. Details of the photovoltaic system design in a monocular house are described.


2021 ◽  
Vol 18 (1) ◽  
pp. 95-114
Author(s):  
Ana Radojevic ◽  
Danijela Nikolic ◽  
Jasna Radulovic ◽  
Jasmina Skerlic

The implementation of energy efficiency measures and use of renewable energy sources in educational buildings can significantly contribute to reducing energy consumption, but also to CO2 emissions in the entire public sector. The paper shows the comparison of energy consumption indicators for 61 elementary school buildings which have previously been divided in 12 groups, according to the period of construction and size, based on the national typology called TABULA, as the first step of further study on how to use the renewable energy sources. The aim of this paper is to use the energy benchmarking process to select representative facilities which are suitable for applying renewable energy sources, for their further energy efficiency improvement. Indicators of annual specific electricity consumption and CO2 emissions per unit area [kWh/m2] and per user [kWh/user] were calculated. After that, from two groups (in which the highest electricity consumption and CO2 emissions are 68.37% and 74.53% of the total consumption/ emissions), one representative facility was selected.


Sign in / Sign up

Export Citation Format

Share Document