Research on Integrated Control System of the Gas Pressure in Coke Oven

2013 ◽  
Vol 397-400 ◽  
pp. 1214-1219
Author(s):  
Xia Bai ◽  
Da Lu Guan ◽  
Chen Rui

This paper combines hardware reliability and software mobility with modern intelligent control through the analysis of the control object using intelligent decoupling control scheme to control the pressure control system of the large gas collector in coke oven. By using expert control strategies based on the DCS, the paper develops the system design which is versatile and effective.

2013 ◽  
Vol 756-759 ◽  
pp. 415-419
Author(s):  
Xue Jun He ◽  
Zong Ren Gao ◽  
Jun Zhang

In view of the pressure control system of the large gas collector in coke oven, this paper puts forward a optimization control scheme of coke oven collector pressure intelligent decoupling control system. Using a variety of advanced control strategies based on the DCS , it develops a large coke oven collector pressure control system.The engineering application shows that the system design is versatile and effectiveness.


2011 ◽  
Vol 460-461 ◽  
pp. 625-630
Author(s):  
Gong Fa Li ◽  
Jian Yi Kong ◽  
Guo Zhang Jiang ◽  
Liang Xi Xie

In order to improve the level of control and management of coke oven, the research on control and management integrated system is carried out. In modern advanced control system of coke oven, the control scheme of feedback combined with feed-forward, and control merged with management is widely used. The integrated control and management system of coke oven is introduced systematically, including the system model, production planning and management, heating control system, the model and method of evaluating temperature, intelligent combustion control and the pressure control gas collector of coke oven. It is pointed out that the integration of control and management is the developing orientation of coke oven control system.


2000 ◽  
Vol 122 (4) ◽  
pp. 185-192 ◽  
Author(s):  
Shoubo Wang ◽  
Ram S. Mohan ◽  
Ovadia Shoham ◽  
Jack D. Marrelli ◽  
Gene E. Kouba

The performance of gas-liquid cylindrical cyclone (GLCC©) separators for two-phase flow metering loop can be improved by eliminating liquid overflow into the gas leg or gas blow-out through the liquid leg, utilizing suitable integrated control systems. In this study, a new integrated control system has been developed for the GLCC, in which the control is achieved by a liquid control valve in the liquid discharge line and a gas control valve in the gas discharge line. Simulation studies demonstrate that the integrated level and pressure control system is highly desirable for slugging conditions. This strategy will enable the GLCC to operate at constant pressure so as not to restrict well flow and simultaneously prevent liquid carry-over and gas carry-under. Detailed experimental studies have been conducted to evaluate the improvement in the GLCC operational envelope for liquid carry-over with the integrated level and pressure control system. The results demonstrate that the GLCC equipped with integrated control system is capable of controlling the liquid level and GLCC pressure for a wide range of flow conditions. The experimental results also show that the operational envelope for liquid carry-over is improved twofold at higher liquid flow rate region and higher gas flow rate region. GLCC performance is also evaluated by measuring the operational envelope for onset of gas carry-under. [S0195-0738(00)00804-9]


2017 ◽  
pp. 62-67
Author(s):  
V. G. Kuznetsov ◽  
O. A. Makarov

At cementing of casing of oil and gas wells during the process of injecting of cement slurry in the casing column the slurry can move with a higher speed than it’s linear injection speed. A break of continuity of fluid flow occurs, what can lead to poor quality isolation of producing formations and shorten the effective life of the well. We need to find some technical solution to stabilize the linear velocity of the cement slurry in the column. This task can be resolved with an automated control system.


Author(s):  
Eric Chalmers ◽  
Edmond Lou ◽  
Doug Hill ◽  
Vicky H. Zhao ◽  
Man-Sang Wong

2014 ◽  
Vol 494-495 ◽  
pp. 1274-1277
Author(s):  
Kan Liu ◽  
Hao You

This article introduces a measurement system based on LabVIEW used for optical interference fringe on micro-fluidic chips. This system mainly uses cameras to capture real-time images of wedge interference fringe on micro-fluidic chips, then the collected images will be binarized by LabVIEW. The processed images will be divided by zone , determine the flatness and gap thickness of the micro-fluidic chips by interference fringes with different directions of deflection and numbers. Finally, feedback from measured data will be used to adjust the flatness and gap thickness of micro-fluidic chips in order to meet the requirement of tests.


2011 ◽  
Vol 230-232 ◽  
pp. 187-191
Author(s):  
Gong Fa Li ◽  
Si Qiang Xu ◽  
Jin Hui Wang ◽  
Jin Tang Yang ◽  
Jian Yi Kong ◽  
...  

The air compressor system is a time-varying, delay and nonlinear complex system, it has a very important sense to ensure that the supply pressure is stable in the compressor control system. According to the working characteristic of air compressor system, the fuzzy control theory, as one of the modern control theories, was applied into the constant pressure control system to design a fuzzy pressure controller. The simulation results show that the controller was more convenient and effective; it has certain directive significance and reference for the other parameter’s control of air compressor system.


Sign in / Sign up

Export Citation Format

Share Document