Influencing Factors Analysis on Regulating Effect of the Pintle Controlled Thrust Regulating Mechanism

2010 ◽  
Vol 44-47 ◽  
pp. 1320-1324
Author(s):  
Lan Ting Zhang ◽  
Hai Qing Cheng ◽  
Li Ming Song ◽  
Jin Shun Yan
Keyword(s):  
Mathematical Model ◽  
Influencing Factors ◽  
Theoretical Foundation ◽  
Rocket Engine ◽  
Structure Design ◽  
Factors Analysis ◽  
Main Factors ◽  
Solid Rocket ◽  
And Control ◽  
The Mathematical Model

Based on the thrust regulating principle of pintle controlled solid-rocket engine, the mathematical model between pintle motion and thrust changing is established, and influence of main factors to thrust regulating effect is analyzed. These results can provide theoretical foundation for structure design and control of pintle controlled thrust regulating mechanism of solid-rocket engine.

Dynamic Analysis on a Cable-Driven Interventional Active Catheter Using Kane's Method Combined with Screw Theory

2014 ◽  
Vol 527 ◽  
pp. 140-145
Author(s):  
Da Xu Zhao ◽  
Bai Chen ◽  
Guo Zhong Shou ◽  
Yu Qi Gu
Keyword(s):  
Mathematical Model ◽  
Dynamic Analysis ◽  
Motion Control ◽  
Screw Theory ◽  
Driving Forces ◽  
Structure Design ◽  
Kinematics And Dynamics ◽  
Existing Problems ◽  
Blind Area ◽  
The Mathematical Model

In view of the existing problems of traditional interventional catheters, particularly poor activity, operation difficulty and mass blind area, a novel interventional catheter with a cable-driven active head-end is proposed, and a prototype was built to verify the performance. This paper deals with the kinematics and dynamics of the cable-driven prototype, a dynamic model based on Kanes method combined with screw theory was presented in this paper. According the mathematical model and the prototypes structure, the analysis of kinematics and dynamics of active head-end-end is done in the environment of Mathematica. The needed driving forces of every joint when the system moving along planned trajectory are calculated. The results can provide a basis for the structure design and motion control of the interventional active catheter.

A prey–predator model and control of a nematodes pest using control in banana: Mathematical modeling and qualitative analysis

2021 ◽  
pp. 2150089
Author(s):  
Sudhakar Yadav ◽  
Vivek Kumar
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Local Stability ◽  
Detection Method ◽  
Initial Release ◽  
Pest Detection ◽  
Predator Model ◽  
And Control ◽  
The Mathematical Model ◽  
Theoretical Results

This study develops a mathematical model for describing the dynamics of the banana-nematodes and its pest detection method to help banana farmers. Two criteria: the mathematical model and the type of nematodes pest control system are discussed. The sensitivity analysis, local stability, global stability, and the dynamic behavior of the mathematical model are performed. Further, we also develop and discuss the optimal control mathematical model. This mathematical model represents various modes of management, including the initial release of infected predators as well as the destroying of nematodes. The theoretical results are shown and verified by numerical simulations.

Mathematical Modeling of Electrochemical Deburring

2010 ◽  
Vol 126-128 ◽  
pp. 545-550 ◽  
Author(s):  
Wen Ji Xu ◽  
W. Wang ◽  
Xu Yue Wang ◽  
Gui Bing Pang
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Influencing Factors ◽  
Applied Voltage ◽  
Experimental Results ◽  
Electrode Gap ◽  
Workpiece Material ◽  
Burr Height ◽  
Object A ◽  
The Mathematical Model

The drilling burr is taken as the research object. A mathematical model of electrochemical deburring (ECD) is established and the effects of main influencing factors, such as inter-electrode gap, applied voltage and deburring time, on burr height have been analyzed. The results show that the deburring time increases with the increase of initial burr height, inter-electrode gap, with the decrease of volume of electrochemical equivalent of the workpiece material, conductivity of electrolyte and applied voltage. The deburring time for various burr heights can be predicted by the mathematical model. The calculated results obtained from the mathematical model are approximately consistent with the experimental results. The results show that initial burr height h0=0.722mm is removed, and the fillet radius R=0.211mm is obtained.

Buffer Groove Design of Continuous Rotary Electro-Hydraulic Servo Motor Used in Simulator

2010 ◽  
Vol 37-38 ◽  
pp. 234-237
Author(s):  
Xiao Jing Wang ◽  
Jun Peng Shao ◽  
Guang Bin Yu
Keyword(s):  
Mathematical Model ◽  
Pressure Gradient ◽  
Experimental Research ◽  
Pressure Field ◽  
Structure Design ◽  
Cavity Pressure ◽  
Servo Motor ◽  
Pressure Impact ◽  
Hydraulic Servo ◽  
The Mathematical Model

In order to improve the low speed stationary of continuous rotary electro-hydraulic servo motor and avoid the pressure impact in the sealed cavity during the oil distributing, this paper designed the shape of buffer groove, established the mathematical model of pressure gradient, and analyzed change law of sealed cavity pressure gradient under different dimension of buffer groove. The pressure field distribution of sealed cavity was studied in certain radial and axial gap, and it is validated the dimension of buffer groove is rational, which lays foundation for structure design and experimental research of large displacement servo motor.

Study of Topology and Control Strategy of the Bidirectional Energy Storage Converter Based on Three-Level

2013 ◽  
Vol 397-400 ◽  
pp. 1169-1173
Author(s):  
Hong Wei Tang ◽  
Xi Kun Chen ◽  
Yan Xia Gao
Keyword(s):  
Mathematical Model ◽  
Energy Storage ◽  
Control Strategy ◽  
Lithium Battery ◽  
Decoupling Control ◽  
Midpoint Potential ◽  
Simulation Results ◽  
And Control ◽  
The Mathematical Model ◽  
Battery Module

To adapt to the requirements of the charging and discharging of the lithium battery, the paper presents a three-level based bidirectional energy storage converter topology.It has strong adaptability and can manage the charge and discharge of multi-series and parallel battery module. The mathematical model of the converter is analyzed, and the two operation modes of the converter control strategy are studied; Analysis the feed-forward decoupling control of three-level rectifier, and the variable scale factor is used to control midpoint potential. The simulation results demonstrate the feasibility of the design.

A Control System on Soil Temperature

2014 ◽  
Vol 599-601 ◽  
pp. 673-679
Author(s):  
Shi Guo Chen ◽  
Li Hua Hu ◽  
Dong Sheng Wu ◽  
Xue Yong Chen
Keyword(s):  
Mathematical Model ◽  
Control System ◽  
Soil Temperature ◽  
Control Algorithm ◽  
Soil Ecology ◽  
Control Soil ◽  
Pid Algorithm ◽  
And Control ◽  
The Mathematical Model

The soil’s temperature plays an important role of soil ecology research. In order to gain and control soil’ temperature. A control system is proposed for soil’s temperature. And a new control algorithm which is based on the PID algorithm is designed in the control system to handle the complex change of the soil’s temperature. It does not need to know the mathematical model of soil’s temperature. At last, the control result is analyzed in this paper. The result shows that the soil’s temperature is controlled ideal by this control system which is accurate to 0.5°C.

scholarly journals Analisis Kontrol Optimal Pada Model Matematika Penyebaran Pengguna Narkoba Dengan Faktor Edukasi

2020 ◽  
Vol 17 (2) ◽  
pp. 238-248
Author(s):  
Resmawan ◽  
M Eka ◽  
Nurwan ◽  
N Achmad
Keyword(s):  
Numerical Simulation ◽  
Mathematical Model ◽  
Optimal Control ◽  
Drug Users ◽  
Minimum Principle ◽  
Runge Kutta Method ◽  
Runge Kutta ◽  
Model Drug ◽  
And Control ◽  
The Mathematical Model

ABSTRACT This paper discusses the mathematical model of drug users with education. Optimal control theory was used on this model with education as a control to achieve the goal of minimizing the number of drug users. The optimal control problem was analyzed using Pontryagin’s minimum principle and performed numerical simulation by using a 4th-order Runge-Kutta method. Based on the numerical simulation, there was a change in the number in each population which caused the population with education to increase, and control with education resulted in the reduced number of drug users. Keywords: Optimal control; mathematical model; drug users; education   ABSTRAK Artikel ini membahas tentang model matematika penyebaran pengguna narkoba dengan faktor edukasi. Teori kontrol optimal diterapkan pada model ini dengan pemberian kontrol berupa edukasi dengan tujuan untuk meminimumkan jumlah pengguna narkoba. Kontrol optimal dianalisis menggunakan Prinsip Minimum Pontryagin dan dilakukan simulasi numerik dengan menggunakan metode Runge-Kutta orde 4. Berdasarkan simulasi diperoleh bahwa terjadi perubahan jumlah di tiap populasi dan mengakibatkan jumlah populasi dengan edukasi bertambah, serta pemberian kontrol dengan edukasi mengakibatkan jumlah pengguna narkoba berkurang. Kata kunci       : Kontrol optimal; model matematika; pengguna narkoba; edukasi

Modeling and Simulation of Educational Linear Motion Module

2009 ◽  
Author(s):  
Dian-sheng Chen ◽  
Yu-xin Chen ◽  
Tian-miao Wang
Keyword(s):  
Mathematical Model ◽  
Dynamic Performance ◽  
Linear Motion ◽  
Motion Model ◽  
Load Case ◽  
Know How ◽  
Working Principle ◽  
And Control ◽  
The Mathematical Model ◽  
Control Accuracy

In order to let the student understand the linear motion module’ principles and know how to improve the dynamic performance and control accuracy, a mathematical model is established based on the analysis of the composition and working principle of linear motion module. On the load and unload conditions, we simulate and analyze the system respectively. In the load case, PID parameters are obtained after the PID regulation. The correction of establishing the mathematical model and simulating the system are verified so that the linear motion model’ precision is effectively enhanced.

Mathematical Simulation of Flux Film State in Gap between Mould and Solidified Shell

2017 ◽  
Vol 893 ◽  
pp. 272-275
Author(s):  
Li Jun Cao
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Slab Surface ◽  
Slab Caster ◽  
Mould Flux ◽  
Main Factors ◽  
Simulation Results ◽  
The Mathematical Model ◽  
Casting Production ◽  
Film State

The mathematical model for heat transfer during solidification of steel in the mould of slab caster was established in this paper. The temperature distribution of slab surface was described. Based on the work which was described above, the model of flux film state was developed in present paper. Lubrication function of mould flux and the effects of main factors on lubrication had been discussed. The simulation results provided theory foundation for appraising lubrication function of flux and optimizing casting production.

Sign in / Sign up

Export Citation Format

Share Document