Chinese Spicehush (Lindera communis) Seed Oil Catalyzed into Biodiesel by Enzymatic Method

2013 ◽  
Vol 448-453 ◽  
pp. 1587-1591 ◽  
Author(s):  
Zi Yuan Zhou ◽  
Wei Gang Wang ◽  
Jiu Fang Duan ◽  
Li Wei Zhu ◽  
Jian Xin Jiang
Keyword(s):  
Catalytic Activity ◽  
Reaction Time ◽  
Organic Solvents ◽  
Seed Oil ◽  
Immobilized Lipase ◽  
Methyl Esters ◽  
Biodiesel Production ◽  
Enzymatic Method ◽  
The Stability ◽  
The Cost

Chinese Spicehush (Lindera communis) is widely distributed in China. In this paper, the biodiesel production fromLindera communisseed oil by immobilized lipase Lipozyme TLIM and Novozym 435 was studied. The effects of reaction time, segmented addition of methanol, lipase loading, organic solvents and ultrasonic on the transesterification were compared. In addition, the stability of lipase was also studied. The results show that mixture of Lipozyme TLIM 3% and 1% Novozym435 not only improves the catalytic activity, but also reduces the cost of using the enzyme. The yield of methyl esters is 90.8% after reaction of 12 h.

scholarly journals Production and Characterization of Biodiesel Derived from a Novel Source Koelreuteria paniculata Seed Oil

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 791 ◽  
Author(s):  
Inam Ullah Khan ◽  
Zhenhua Yan ◽  
Jun Chen
Keyword(s):  
Fatty Acid ◽  
Seed Oil ◽  
Methyl Esters ◽  
Chemical Properties ◽  
Raw Material ◽  
Biodiesel Production ◽  
Edible Plant ◽  
Physico Chemical ◽  
Koelreuteria Paniculata ◽  
The Cost

Biodiesel is a clean and renewable fuel, which is considered as the best alternative to diesel fuel, but the feedstock contributes more than 70% of the cost. The most important constituent essential for biodiesel development is to explore cheap feedstock with high oil content. In this work, we found novel non-edible plant seeds of Koelreuteria paniculata (KP) with high oil contents of 28–30 wt.% and low free fatty acid contents (0.91%), which can serve as a promising feedstock for biodiesel production. KP seed oil can convert into biodiesel/fatty acid methyl esters (FAMEs) by base-catalyzed transesterification with the highest biodiesel production of 95.2% after an optimization process. We obtained the optimal transesterification conditions, i.e., oil/methanol ratio (6:1), catalyst concentration (0.32), reaction temperature (65 °C), stirring rate (700 rpm), and reaction time (80 min). The physico-chemical properties and composition of the FAME were investigated and compared with mineral diesel. The synthesized esters were confirmed and characterized by the application of NMR (1H and 13C), FTIR, and GC-MS. The biofuel produced from KP seed oil satisfies the conditions verbalized by ASTM D6751 and EN14214 standards. Accordingly, KP source oil can be presented as a novel raw material for biofuel fabrication.

scholarly journals Comparative analyses of biodiesel produced from neem and jatropha seed oil

2021 ◽  
Vol 12 (2) ◽  
pp. 141-143
Author(s):  
I.S. Ibrahim ◽  
I.T. Abdullahi ◽  
F.Y. Muhammad
Keyword(s):  
Reaction Time ◽  
Methyl Ester ◽  
Physicochemical Properties ◽  
Seed Oil ◽  
Methyl Esters ◽  
Reaction Times ◽  
Biodiesel Production ◽  
Jatropha Oil ◽  
Jatropha Seed ◽  
Astm D6751

Biodiesel is derived from triglycerides by transesterification reaction with alcohol (ethanol or methanol), and has classified as a renewable, biodegradable, and nontoxic fuel. Several methods for biodiesel production have been developed, among which transesterification using alkali-catalysis gives high levels of conversion of triglycerides to their corresponding methyl esters in short reaction times. This study was conducted to extract the neem and Jatropha oil for the production of biodiesel using alkali-catalyzed reaction The samples were subjected to reaction with sodium hydroxide (NaOH), 0.2:1 w/v methanol (MeOH) to oil mole ratio, reaction temperature of 6°C, and 30 min reaction time. The final biodiesel yield obtained was 47.5% and 45.5% from the neem and the jaropha oil sample respectively. The basic physicochemical properties of the jatropha methyl ester produced from both jatropha oil samples were found to be within the ASTM D6751 specified limits.

Mango (Magnifera indica) seed oil grown in Dilla town as potential raw material for biodiesel production using NaOH- a homogeneous catalyst

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Diesel Engine ◽  
Physicochemical Properties ◽  
Seed Oil ◽  
Methyl Esters ◽  
Pollution Prevention ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Homogeneous Catalyst ◽  
Minimal Amount

Biodiesel produced by transesterification process from vegetable oils or animal fats is viewed as a promising renewable energy source. Now a day’s diminishing of petroleum reserves in the ground and increasing environmental pollution prevention and regulations have made searching for renewable oxygenated energy sources from biomasses. Biodiesel is non-toxic, renewable, biodegradable, environmentally benign, energy efficient and diesel substituent fuel used in diesel engine which contributes minimal amount of global warming gases such as CO, CO2, SO2, NOX, unburned hydrocarbons, and particulate matters. The chemical composition of the biodiesel was examined by help of GC-MS and five fatty acid methyl esters such as methyl palmitate, methyl stearate, methyl oleate, methyl linoleate and methyl linoleneate were identified. The variables that affect the amount of biodiesel such as methanol/oil molar ratio, mass weight of catalyst and temperature were studied. In addition to this the physicochemical properties of the biodiesel such as (density, kinematic viscosity, iodine value high heating value, flash point, acidic value, saponification value, carbon residue, peroxide value and ester content) were determined and its corresponding values were 87 Kg/m3, 5.63 Mm2/s, 39.56 g I/100g oil, 42.22 MJ/Kg, 132oC, 0.12 mgKOH/g, 209.72 mgKOH/g, 0.04%wt, 12.63 meq/kg, and 92.67 wt% respectively. The results of the present study showed that all physicochemical properties lie within the ASTM and EN biodiesel standards. Therefore, mango seed oil methyl ester could be used as an alternative to diesel engine.

scholarly journals Enzymatic Transesterification of Waste Frying Oil from Local Restaurants in East Colombia Using a Combined Lipase System

2020 ◽  
Vol 10 (10) ◽  
pp. 3566
Author(s):  
Mary Angélica Ferreira Vela ◽  
Juan C. Acevedo-Páez ◽  
Nestor Urbina-Suárez ◽  
Yeily Adriana Rangel Basto ◽  
Ángel Darío González-Delgado
Keyword(s):  
Reaction Time ◽  
Methyl Esters ◽  
Enzyme Concentration ◽  
Operating Conditions ◽  
Frying Oil ◽  
Biodiesel Production ◽  
Optimum Operating ◽  
Waste Frying Oil ◽  
Production Chain ◽  
Enzymatic Transesterification

The search for innovation and biotechnological strategies in the biodiesel production chain have become a topic of interest for scientific community owing the importance of renewable energy sources. This work aimed to implement an enzymatic transesterification process to obtain biodiesel from waste frying oil (WFO). The transesterification was performed by varying reaction times (8 h, 12 h and 16 h), enzyme concentrations of lipase XX 25 split (14%, 16% and 18%), pH of reaction media (6, 7 and 8) and reaction temperature (35, 38 and 40 °C) with a fixed alcohol–oil molar ratio of 3:1. The optimum operating conditions were selected to quantify the amount of fatty acid methyl esters (FAMEs) generated. The highest biodiesel production was reached with an enzyme concentration of 14%, reaction time of 8 h, pH of 7 and temperature of 38 °C. It was estimated a FAMEs production of 42.86% for the selected experiment; however, best physicochemical characteristics of biodiesel were achieved with an enzyme concentration of 16% and reaction time of 8 h. Results suggested that enzymatic transesterification process was favorable because the amount of methyl esters obtained was similar to the content of fatty acids in the WFO.

scholarly journals Biodiesel Production from a Novel Nonedible Feedstock, Soursop (Annona muricata L.) Seed Oil

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2562 ◽  
Author(s):  
Chia-Hung Su ◽  
Hoang Nguyen ◽  
Uyen Pham ◽  
My Nguyen ◽  
Horng-Yi Juan
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Annona Muricata ◽  
Reaction Conditions ◽  
Biodiesel Feedstock ◽  
Acid Catalyzed ◽  
American Society ◽  
Optimal Reaction

This study investigated the optimal reaction conditions for biodiesel production from soursop (Annona muricata) seeds. A high oil yield of 29.6% (w/w) could be obtained from soursop seeds. Oil extracted from soursop seeds was then converted into biodiesel through two-step transesterification process. A highest biodiesel yield of 97.02% was achieved under optimal acid-catalyzed esterification conditions (temperature: 65 °C, 1% H2SO4, reaction time: 90 min, and a methanol:oil molar ratio: 10:1) and optimal alkali-catalyzed transesterification conditions (temperature: 65 °C, reaction time: 30 min, 0.6% NaOH, and a methanol:oil molar ratio: 8:1). The properties of soursop biodiesel were determined and most were found to meet the European standard EN 14214 and American Society for Testing and Materials standard D6751. This study suggests that soursop seed oil is a promising biodiesel feedstock and that soursop biodiesel is a viable alternative to petrodiesel.

scholarly journals Biodiesel Production from Waste Cooking Oil

2015 ◽  
Vol 3 (8) ◽  
pp. 448-450 ◽  
Author(s):  
Vinoth E
Keyword(s):  
Methyl Esters ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Plant Resources ◽  
Waste Cooking Oils ◽  
New Energy ◽  
General Aspects ◽  
Cooking Oils ◽  
The Cost ◽  
No Emissions

Biodiesel is receiving increased attention as an alternative, non-toxic, biodegradable and renewable diesel fuel and contributes a minimum amount of net greenhouse gases, such as CO2, SO2 and NO emissions to the atmosphere. Exploring new energy resources, such as biofuel is of growing importance in recent years. The possibility of obtaining oil from plant resources has created a great importance in several countries. Vegetable oil after esterification being used as bio diesel, Considering the cost and demand of the edible oil is bearable, so it may be preferred for the preparation of bio diesel in India.  The transesterification of waste cooking oils with methanol as well as the main uses of the fatty acid methyl esters are reviewed. The general aspects of this process and the applicability of different types of catalysts (acids, alkaline metal hydroxides, alkoxides and carbonates, enzymes and non-ionic bases, such as amines, amides, and guanidine and triamino (imino) phosphoranes) are described. Transesterification is carried in a reaction cavity, once the reaction is complete, glycerine and biodiesel are gravity separated.   

scholarly journals Biodiesel Production from Rubber Seed Oil by Transesterification Using a Co-solvent of Fatty Acid Methyl Esters

2018 ◽  
Vol 41 (5) ◽  
pp. 1013-1018 ◽  
Author(s):  
Hanh Ngoc Thi Le ◽  
Kiyoshi Imamura ◽  
Norie Watanabe ◽  
Masakazu Furuta ◽  
Norimichi Takenaka ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Fatty Acid Methyl Esters ◽  
Seed Oil ◽  
Methyl Esters ◽  
Biodiesel Production ◽  
Rubber Seed Oil ◽  
Rubber Seed ◽  
Acid Methyl

scholarly journals High-Quality Biodiesel Production from Buriti (Mauritia flexuosa) Oil Soapstock

Molecules ◽  
2018 ◽  
Vol 24 (1) ◽  
pp. 94 ◽  
Author(s):  
Samantha Pantoja ◽  
Vanessa Mescouto ◽  
Carlos Costa ◽  
José Zamian ◽  
Geraldo Rocha Filho ◽  
...  
Keyword(s):  
Reaction Time ◽  
Methyl Esters ◽  
Natural Antioxidants ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Palm Tree ◽  
Reaction Conditions ◽  
Mauritia Flexuosa ◽  
Buriti Oil ◽  
Brazilian Standard

The buriti palm (Mauritia flexuosa) is a palm tree widely distributed throughout tropical South America. The oil extracted from the fruits of this palm tree is rich in natural antioxidants. The by-products obtained from the buriti palm have social and economic importance as well, hence the interest in adding value to the residue left from refining this oil to obtain biofuel. The process of methyl esters production from the buriti oil soapstock was optimized considering acidulation and esterification. The effect of the molar ratio of sulfuric acid (H2SO4) to soapstock in the range from 0.6 to 1.0 and the reaction time (30–90 min) were analyzed. The best conditions for acidulation were molar ratio 0.8 and reaction time of 60 min. Next, the esterification of the fatty acids obtained was performed using methanol and H2SO4 as catalyst. The effects of the molar ratio (9:1–27:1), percentage of catalyst (2–6%) and reaction time (1–14 h) were investigated. The best reaction conditions were: 18:1 molar ratio, 4% catalyst and 14 h reaction time, which resulted in a yield of 92% and a conversion of 99.9%. All the key biodiesel physicochemical characterizations were within the parameters established by the Brazilian standard. The biodiesel obtained presented high ester content (96.6%) and oxidative stability (16.1 h).

scholarly journals Biocatalytic Pickering Emulsions Stabilized by Lipase-Immobilized Carbon Nanotubes for Biodiesel Production

Catalysts ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 587 ◽  
Author(s):  
Lihui Wang ◽  
Xinlong Liu ◽  
Yanjun Jiang ◽  
Liya Zhou ◽  
Li Ma ◽  
...  
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
High Efficiency ◽  
Polynomial Equation ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Multiwall Carbon Nanotube ◽  
Pickering Emulsions ◽  
Optimum Reaction ◽  
Immobilized Candida Antarctica Lipase

Biodiesel is a promising renewable energy source that can replace fossil fuel, but its production is limited by a lack of high-efficiency catalysts for mass production and popularization. In this study, we developed a biocatalytic Pickering emulsion using multiwall carbon nanotube-immobilized Candida antarctica lipase B (CALB@PE) to produce biodiesel, with J. curcas L. seed oil and methanol as substrates. The morphology of CALB@PE was characterized in detail. A central composite design of the response surface methodology (CCD-RSM) was used to study the effects of the parameters on biodiesel yield, namely the amount of J. curcas L. seed oil (1.5 g), molar ratio of methanol to oil (1:1–7:1), CALB@PE dosage (20–140 mg), temperature (30–50 °C), and reaction time (0–24 h). The experimental responses were fitted with a quadratic polynomial equation, and the optimum reaction conditions were the methanol/oil molar ratio of 4.64:1, CALB@PE dosage of 106.87 mg, and temperature of 34.9 °C, with a reaction time of 11.06 h. A yield of 95.2%, which was basically consistent with the predicted value of 95.53%, was obtained. CALB@PE could be reused up to 10 times without a substantial loss of activity. CALB@PE exhibited better reusability than that of Novozym 435 in the process of biodiesel production.

Biodiesel Production From Crude Rubber Seed Oil Using Supercritical Methanol Transesterification

2015 ◽  
Vol 781 ◽  
pp. 655-658 ◽  
Author(s):  
Thakun Sawiwat ◽  
Somjai Kajorncheappunngam
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Supercritical Methanol ◽  
Rubber Seed Oil ◽  
Promising Alternative ◽  
Rubber Seed ◽  
Biodiesel Synthesis

Synthesis of biodiesel from rubber seed oil using a supercritical methanol was investigated under various reaction conditions (220 - 300°C, 80 - 180 bar) with reaction time of 1-15 min and oil:methanol molar ratio of 1:20 - 1:60. Free fatty acid methyl esters (FAMEs) content were analyzed by gas chromatography-mass spectroscopy (GC-MS). Most properties of produced biodiesel were in good agreement with biodiesel standard (EN 14214). The maximum FAME yield of 86.90% was obtained at 260°C, 160 bar, 5 min reaction time using oil:methanol molar ratio of 1:40. The result showed the acid value of rubber seed oil decreased to 0.58 mgKOH/g from initial 24 mgKOH/g to. It could be concluded from this findings that crude rubber seed oil is a promising alternative raw material for biodiesel synthesis via supercritical methanol tranesterification.

Sign in / Sign up

Export Citation Format

Share Document