Centrifuge Modeling on Seismic Behavior of Pile in Liquefiable Soil Ground

2013 ◽  
Vol 479-480 ◽  
pp. 1139-1143
Author(s):  
Wen Yi Hung ◽  
Chung Jung Lee ◽  
Wen Ya Chung ◽  
Chen Hui Tsai ◽  
Ting Chen ◽  
...  
Keyword(s):  
Seismic Behavior ◽  
Soil Structure ◽  
Lateral Displacement ◽  
Bending Moment ◽  
Soil Liquefaction ◽  
Centrifuge Modeling ◽  
Shaking Table ◽  
Pile Head ◽  
Liquefiable Soil ◽  
Tip Mass

Dramatic failure of pile foundations caused by the soil liquefaction was founded leading to many studies for investigating the seismic behavior of pile. The failures were often accompanied with settlement, lateral displacement and tilting of superstructures. Therefore soil-structure interaction effects must be properly considered in the pile design. Two tests by using the centrifuge shaking table were conducted at an acceleration field of 80 g to investigate the seismic response of piles attached with different tip mass and embedded in liquefied or non-liquefied deposits during shaking. It was found that the maximum bending moment of pile occurs at the depth of 4 m and 5 m for dry sand and saturated sand models, respectively. The more tip mass leads to the more lateral displacement of pile head and the more residual bending moment.

Seismic Response of Pile Groups Improved with Deep Cement mixing Columns in Liquefiable Sand: Shaking Table Tests

2021 ◽  
Author(s):  
Dingwen Zhang ◽  
Anhui Wang ◽  
Xuanming Ding
Keyword(s):  
Seismic Behavior ◽  
Lateral Displacement ◽  
Bending Moment ◽  
Pile Group ◽  
Shaking Table ◽  
Excess Pore Pressure ◽  
Shaking Table Tests ◽  
Pile Groups ◽  
Acceleration Response ◽  
Table Model

A series of shaking table model tests were performed to examine the effects of deep cement mixing (DCM) columns with different reinforcement depths on the seismic behavior of a pile group in liquefiable sand. Due to the DCM column reinforcement, the fundamental natural frequency of the model ground increases noticeably. The excess pore pressure of soils reduces with the increase of reinforcement depths of the DCM columns. Before liquefaction, the acceleration response of soils in the improved cases is obviously lower than that in the unimproved case, but the acceleration attenuation is greater after liquefaction in the unimproved case. Moreover, the lateral displacement of the superstructure, the settlement of the raft, and the bending moment of the piles in the improved cases are significantly reduced compared to those in the unimproved case, and the reduction ratios rise with the increase of reinforcement depth of the DCM columns. However, reinforcement by the DCM columns may result in the variation of the location of the maximum moment that occurs in the pile.

scholarly journals Seismic Behaviour of Piles in Non-Liquefiable and Liquefiable Soil

2021 ◽  
Author(s):  
Fouad Hussein ◽  
Hesham El Naggar
Keyword(s):  
Finite Element ◽  
Ground Motion ◽  
Numerical Models ◽  
Bending Moment ◽  
Soil Liquefaction ◽  
Shaking Table ◽  
Pile Groups ◽  
Kinematic Interaction ◽  
Inertial Interaction ◽  
Liquefiable Soil

Abstract This paper investigates the nonlinear soil-pile-structure interaction (SPSI) employing three-dimensional (3D) nonlinear finite element models (FEM) verified with the results of large-scale shaking table tests of model pile groups-superstructure systems. The responses of piles in both liquefiable and non-liquefiable soil sites to ground motion with varying intensities were evaluated considering both kinematic and inertial interaction. The calculated piles and soil responses agreed well with the responses measured during the shaking events. The numerical models correctly predicted the different pile deformation modes that were exhibited in the experiments. The finite element analysis (FEA) was then employed to perform a parametric study to evaluate the kinematic and inertial effects on the piles' response, considering different ground motion levels and piles characteristics. It was found that the bending moment of piles in the liquefiable site increases significantly, compared to the non-liquefiable site, due to the loss of lateral support of the liquified soil, and the maximum bending moment occurs at the interface between the liquified and liquefied sand layers. The inertial interaction contributes the most to the bending moments at the pile top and the interface between the top clay and liquefied loose sand layers. For piles with a larger diameter, the bending moment due to kinematic interaction increases significantly, and the bending moment distribution corresponds to short (rigid) pile behaviour. In addition, the piles at the saturated site displace laterally as a rigid body during strong ground motions because the pile base loses the lateral support due to the soil liquefaction. Finally, the kinematic interaction effect becomes more significant for piles with higher elastic modulus.

scholarly journals Study on the horizontal bearing characteristics of pile foundation in coral sand

2021 ◽  
Author(s):  
Chunyan Wang ◽  
Hanlong Liu ◽  
Xuanming Ding ◽  
Chenglong Wang ◽  
Qiang Ou
Keyword(s):  
Lateral Displacement ◽  
Experimental Studies ◽  
Deformation Characteristic ◽  
Bending Moment ◽  
Silica Sand ◽  
Pile Head ◽  
Pile Diameter ◽  
Coral Sand ◽  
Horizontal Pressure ◽  
Different Diameters

This paper presents the horizontal bearing characteristics of piles in coral sand and silica sand from comparative experimental studies. A total of 6 model piles with different diameters are tested. The horizontal bearing capacity, deformation characteristic, bending moment, p-y curve, the change in soil horizontal pressure, as well as the particle breakage behaviour of coral sand are investigated. The results show that, in coral sand foundation, the horizontal bearing capacities of piles and the increments of soil horizontal pressures are obviously greater than those in silica sand. Accordingly, the lateral displacement, the rotation of pile head, the bending moment and the corresponding distribution depth in coral sand are significantly smaller than that in silica sand. The p-y curves indicate that the horizontal stiffness of coral sand is greater than that of silica sand. Remarkably, the breakage behaviour of coral sand is mainly distributed in the range of 10 times pile diameter depth and 5 times pile diameter width on the side where the sand is squeezed by pile. Furthermore, in coral sand, the influence of pile size is more pronounced, the squeezing force generated by pile spread farther and its influence range is larger compared to those in silica sand.

Three-Dimensional Numerical Analyses of Pile Response due to Braceded Excavation-Induced Lateral Soil Movement

2014 ◽  
Vol 580-583 ◽  
pp. 524-531 ◽  
Author(s):  
Lin Li ◽  
Xiao Xin Hu ◽  
Guang Hui Dong ◽  
Ju Liu
Keyword(s):  
Lateral Displacement ◽  
Three Dimensional ◽  
Bending Moment ◽  
Elastic Behavior ◽  
Pile Head ◽  
Soil Pressure ◽  
Soil Movement ◽  
Standard Problem ◽  
Modified Cam Clay ◽  
Pile Response

Using the explicit finite difference code FLAC3D, the behavior of pile adjacent to braced excavation is investigated. The Modified-cam clay constitutive model was employed to model the non-linear stress-strain soil behavior, and the pile was assumed to have linear elastic behavior. The interface model incorporated in FLAC3D code was used to simulate the soil/pile contact, The built-in 'fish' language was used to calculate the data demanded. The pile response such as pile deflection, bending moment and lateral soil pressure were studied, and it is shown that the pile response is different from that caused by the excavations which are unstructted. In "standard" problem, the effect of different pile head constraints on the pile response was investigated, the effect of lateral displacement of the wall, distance from the excavation face, pile stiffness, pile length and axial load on the pile response are also investigated when the pile head is constrained from deflection. The research finding was compared with other published case history and reasonably good agreement was found between them.

scholarly journals Influence of Soil Liquefaction on the Structural Performance of Bridges During Earthquakes: Showa Bridge as A Case Study

2018 ◽  
Vol 7 (4.20) ◽  
pp. 146
Author(s):  
Mohammed K. Dhahir ◽  
Wissam Nadir ◽  
Mohammed H. Rasool
Keyword(s):  
Lateral Displacement ◽  
Bending Moment ◽  
Sandy Soils ◽  
Soil Liquefaction ◽  
Shallow Foundations ◽  
Structural Performance ◽  
Excess Pore Pressure ◽  
Regular Structures ◽  
Loss Of Contact

Liquefaction is generally defined as the loss of contact between soil particles during shaking (earthquakes), and it usually occurs in saturated loose sandy soils where the timescale is insufficient for the water to drain from the pores, thus increasing the excess pore pressure, and thereby floating the sand particles. For regular structures with shallow foundations, liquefaction normally leads to loss of soil strength, which leads to settlement of foundations. On the other hand, bridges are usually supported with piles foundation, which introduces additional effects during liquefaction. Therefore, this paper examines the possible effects of liquefaction on the structural performance of bridges during earthquakes. Furthermore, the failure of Showa Bridge during the 1964 Nagata earthquake was also discussed and analyzed as an example of the catastrophic effects of liquefaction. The analysis shows that the most influential effect during liquefaction is the increase in the unsupported length of piles, which leads to several adverse effects such as increasing the lateral displacement, reduce the buckling capacity, increase the bending moment, and reduce the shaft capacity of the pile. Finally, recommendations regarding the design of pile supported bridges in seismic areas with liquefiable soils have also been suggested. 

Centrifuge modeling of seismic behavior of a slope in liquefiable soil

2002 ◽  
Vol 22 (9-12) ◽  
pp. 1043-1049 ◽  
Author(s):  
V.M Taboada-Urtuzuastegui ◽  
G Martinez-Ramirez ◽  
T Abdoun
Keyword(s):  
Seismic Behavior ◽  
Centrifuge Modeling ◽  
Liquefiable Soil

scholarly journals Seismic Behaviour of Piles in Non-Liquefiable and Liquefiable Soil

2021 ◽  
Author(s):  
Fouad Hussein ◽  
Hesham El Naggar
Keyword(s):  
Ground Motion ◽  
Large Scale ◽  
Numerical Models ◽  
Bending Moment ◽  
Shaking Table ◽  
Pile Groups ◽  
Seismic Behaviour ◽  
Kinematic Interaction ◽  
Inertial Interaction ◽  
Liquefiable Soil

Abstract This paper investigates the nonlinear soil-pile-structure interaction (SPSI) employing three-dimensional (3D) nonlinear finite element (FE) models verified with the results of large-scale shaking table tests of model pile groups-superstructure systems. The responses of piles in both liquefiable and non-liquefiable soil sites to ground motion with varying intensities were evaluated considering both kinematic and inertial interaction. The calculated piles and soil responses agreed well with the responses measured during the shaking events. The numerical models correctly predicted the different pile deformation modes that were exhibited in the experiments. The FEA was then employed to perform a parametric study to evaluate the kinematic and inertial effects on the piles' response considering different ground motion levels and piles characteristics. It was found that the bending moment of piles in the liquefiable site increases significantly, compared to the non-liquefiable site, due to the loss of lateral support of the liquified soil, and the maximum bending moment occurs at the interface between the liquified and non-liquefied sand layers. The inertial interaction contributes the most to the bending moments at the pile top and the interface between the top clay and liquefied loose sand layers. For piles with a larger diameter, the bending moment due to kinematic interaction increases significantly and the bending moment distribution corresponds to short (rigid) pile behaviour. In addition, the piles at the saturated site displace laterally as a rigid body during strong ground motions because the pile base loses the lateral support due to the liquefaction of the bottom dense sand. Finally, the kinematic interaction effect becomes more significant for piles with higher elastic modulus.

scholarly journals Driven Pile Effects on Nearby Cylindrical and Semi-Tapered Pile in Sandy Clay

2021 ◽  
Vol 11 (7) ◽  
pp. 2919
Author(s):  
Massamba Fall ◽  
Zhengguo Gao ◽  
Becaye Cissokho Ndiaye
Keyword(s):  
Coupling Effect ◽  
Lateral Displacement ◽  
Bending Moment ◽  
Adaptive Mesh ◽  
Pile Driving ◽  
Arbitrary Lagrangian Eulerian ◽  
Axial Forces ◽  
Tapered Pile ◽  
Driven Pile ◽  
The Impact

A pile foundation is commonly adopted for transferring superstructure loads into the ground in weaker soil. They diminish the settlement of the infrastructure and augment the soil-bearing capacity. This paper emphases the pile-driving effect on an existing adjacent cylindrical and semi-tapered pile. Driving a three-dimensional pile into the ground is fruitfully accomplished by combining the arbitrary Lagrangian–Eulerian (ALE) adaptive mesh and element deletion methods without adopting any assumptions that would simplify the simulation. Axial forces, bending moment, and lateral displacement were studied in the neighboring already-installed pile. An investigation was made into some factors affecting the forces and bending moment, such as pile spacing and the shape of the already-installed pile (cylindrical, tapered, or semi-tapered). An important response was observed in the impact of the driven pile on the nearby existing one, the bending moment and axial forces were not negligible, and when the pile was loaded, it was recommended to consider the coupling effect. Moreover, the adjacent semi-tapered pile was subjected to less axial and lateral movement than the cylindrical one with the same length and volume for taper angles smaller than 1.0°, and vice versa for taper angles greater than 1.4°.

Sign in / Sign up

Export Citation Format

Share Document