Intelligent Control Mining Management System in an Open Pit Based on GIS/GPS/GPRS/RFID

2011 ◽  
Vol 50-51 ◽  
pp. 663-668 ◽  
Author(s):  
Qing Hua Gu ◽  
Cai Wu Lu ◽  
Shi Gun Jing ◽  
Xin Ma

Using GIS(Geographic Information System), GPS(Global Positioning System), GPRS(General Packet Radio Service) and RFID(Radio Frequency Identification), an intelligent control mining management system in an open pit has been designed and developed. A linear programming model is set up in a practical application. By the model, the system can automatically draw up production plan of ore blending well every day. The system can monitor and dispatch open-pit trucks and shovels well, and can play back their historical paths. It can monitor and control the process of mining production in real time. By RFID, The system can also count the number of trucks’ delivery and shovels’ loading automatically. Experiments on real scenes show that the performance of this system is stable and can satisfy production standards of ore blending in open pits.

2011 ◽  
Vol 467-469 ◽  
pp. 207-211
Author(s):  
Shi Gun Jing ◽  
Fa Ben Li ◽  
Xin Ma

Using GIS(Geographic Information System), GPS(Global Positioning System), and GPRS(General Packet Radio Service), an digital mining control management system in an open pit has been designed and developed. A linear programming model is set up in a practical application. By the model, the system can automatically draw up production plan of ore blending well every day. The system can monitor and dispatch open-pit trucks and shovels well, and can play back their historical paths. It can monitor and control the process of mining production in real time. The system can also count the number of trucks’ delivery and shovels’ loading automatically. Experiments on real scenes show that the performance of this system is stable and can satisfy production standards of ore blending in open pits.


2010 ◽  
Vol 39 ◽  
pp. 347-351
Author(s):  
Qing Hua Gu ◽  
Cai Wu Lu ◽  
Shi Gun Jing

In view of the request of trucks and shovels transportation automation and the characteristic of complex terrain in open pit, this paper introduces the current advanced RFID(Radio Frequency Identification) and GPRS(General Packet Radio Service). Using these technologies, the automatic transportation management system of trucks and shovels in open pit has been designed and developed. This system not only can count the number of trucks’ delivery and shovels’ loading automatically, but also can manage the vehicles’ transportation in open pit according to the ore proportioning plan. This greatly enhances the trucks and shovels working efficiency in open pit and provides the stable ore for mineral processing. Experiments on real scenes show that this system’s performance is stable, can satisfy production request in open pit and enhance the mine labor productivity greatly.


2014 ◽  
Vol 651-653 ◽  
pp. 2040-2044
Author(s):  
Ci Nian Wang

After a full analysis of the principle and general structure of Medicine Distribution Center (MDC), this paper researches the application of RFID (Radio Frequency Identification) in MDC. The MDC adopts the RFID as the support platform, covering the medicines’ entry, picking, checking, delivery and many other operation flows. The paper also constructs a new medicine-distribution mode and its information system model in accordance with GPS (global positioning system), GIS (geographical information system) and routing optimization technology. The MDC can collect, deliver, check, and update mass data on the medicines’ entry and delivery, the labor intensity being decreased. Fault scanning, miss scanning, re-scanning and other artificial errors have been avoided, and the efficiency and accuracy improved.


2013 ◽  
Vol 9 (1) ◽  
pp. 4 ◽  
Author(s):  
Luca Catarinucci ◽  
Luigi Patrono

The adoption of solutions based on Radio Frequency IDentification technology in a wide range of contexts is a matter of fact. In many situations, such as the tracking of small-size living animals, the straightforward use of commercial systems does not ensure adequate performance. Consequently, both the RFID hardware and the software control platform should be tailored for the particular application. In this work, the specific requirements of Near Field Ultra High Frequency RFID reader antennas suitable for small-size animal localization and tracking are identified and a control system in a LabVIEW environment is designed. Afterwards, both hardware and software solutions have been implemented and validated. In particular, an algorithm based on the measured Received Signal Strength Indication, in order to obtain precise localization data, was developed and validated. Finally, the set-up of a first working prototype involving built-in-lab reader antennas has been completed and tested. The achieved results prove the effectiveness of the proposed tracking system.


2016 ◽  
Vol 29 (2) ◽  
pp. 236-247 ◽  
Author(s):  
Kaori Kusuda ◽  
Kazuhiko Yamashita ◽  
Akiko Ohnishi ◽  
Kiyohito Tanaka ◽  
Masaru Komino ◽  
...  

Purpose – To prevent malpractices, medical staff has adopted inventory time-outs and/or checklists. Accurate inventory and maintenance of surgical instruments decreases the risk of operating room miscounting and malfunction. In our previous study, an individual management of surgical instruments was accomplished using Radio Frequency Identification (RFID) tags. The purpose of this paper is to evaluate a new management method of RFID-tagged instruments. Design/methodology/approach – The management system of RFID-tagged surgical instruments was used for 27 months in clinical areas. In total, 13 study participants assembled surgical trays in the central sterile supply department. Findings – While using the management system, trays were assembled 94 times. During this period, no assembly errors occurred. An instrument malfunction had occurred after the 19th, 56th, and 73th uses, no malfunction caused by the RFID tags, and usage history had been recorded. Additionally, the time it took to assemble surgical trays was recorded, and the long-term usability of the management system was evaluated. Originality/value – The system could record the number of uses and the defective history of each surgical instrument. In addition, the history of the frequency of instruments being transferred from one tray to another was recorded. The results suggest that our system can be used to manage instruments safely. Additionally, the management system was acquired of the learning effect and the usability on daily maintenance. This finding suggests that the management system examined here ensures surgical instrument and tray assembly quality.


2012 ◽  
Vol 39 (9) ◽  
pp. 1083-1088 ◽  
Author(s):  
Xuesong Shen ◽  
Ming Lu

The state-of-the-art tracking technologies, such as the global positioning system (GPS) and the radio frequency identification (RFID), lend themselves well to applications in relatively open areas, while falling short of accuracy and reliability in indoor or partially covered application settings due to signal blockage, distortion or deterioration. This research aims to address this challenge in construction engineering by exploring a cost-effective positioning methodology to realize automated and continuous tracking of construction resources. The emerging ZigBee-based wireless sensor networks (WSN) technology is introduced. A framework of WSN application is proposed for indoor construction resources tracking, which consists of a group of stationary and mobile sensor nodes that can communicate with one another. Real-time locations of the mobile nodes can be determined by applying the localization method based on received signal strength indicator (RSSI) and geometric trilateration.


2017 ◽  
Vol 29 (1) ◽  
pp. 136
Author(s):  
M. E. Kjelland ◽  
T. Loper ◽  
C. Woodley ◽  
T. M. Swannack ◽  
T. K. Stroud ◽  
...  

The assisted reproduction industry involving sales and services for gametes and embryos for domestic animals of commercial value is a large market totaling millions of dollars annually. The objective of this study was to develop and test gamete and embryo packaging—Inteli-Straws (I-S) equipped with radio-frequency identification (RFID) technology. Specifically, French straws (0.25 and 0.5 mL) were modified to include extreme cold-tolerant RFID microchips. Two groups of I-S were formed: Group (G)1: RFID chips that were autoclaved (n = 49), and G2: RFID chips that were not autoclaved (n = 47). Both groups had a control that was not exposed to liquid nitrogen (LN). Each group was exposed to LN up to 4 times: 2 slow freezes first and then 2 fast (i.e. vitrification) freezes, and I-S RFID chip survival was determined. I-S detection and readability (non-autoclaved) was also measured, placing I-S just above LN (in vapors, n = 43) or just below LN (n = 38). Statistical differences (α = 0.05) were determined using Fisher’s exact test. The results between G1 and G2 were not significantly different (P = 0.108) after 4 rounds of cryopreservation (and thawing). For G1, 98% (48/49) of the I-S RFID chips remained operational, and control and treatment were not significantly different (P = 1.000). For G2, 89.4% (42/47) of the autoclaved RFID chips remained operational, and control and treatment not significantly different (P = 0.099). RFID chip readability results; that is, the ability to detect the I-S versus not able to detect the I-S, comparing placement just above liquid nitrogen (LN) versus the placement just below LN were not significantly different (P = 0.105). Notably, detection differences varied within each group, with I-S in G1 (mean = 9.5; SD = 3.5 cm) readable at a larger distance, 5.2 cm farther than the mean of G2 (mean = 4.3; SD = 1.9 cm). During AI or embryo transfer (ET), a technician may not clearly identify the label or colour of straw, may incorrectly record the information, or may take more time than desirable to record it. Increased exposure times may lead to decreased viability of gametes and embryos. The results show that by using the I-S, one may quickly scan the straw within LN or LN vapors, thereby automatically detecting information and even uploading it to a database (e.g. scanner sophistication). We are not aware of comparable device to I-S for locating and retrieving associated information without removing the gamete/embryo packaging from LN or LN vapors; unlike traditionally labelled straws (e.g. laser etched or ink labels). Also, for AI and ET, the I-S can be quickly scanned and the straw information automatically detected and uploaded to a database.


2012 ◽  
Vol 263-266 ◽  
pp. 2861-2864 ◽  
Author(s):  
Qing Hu ◽  
Lian Shi Lin ◽  
Yu Ping Qui

Considering ship through lock in river management problems, radio frequency identification was introduced into track work in ship running process for ship through lock, proposed a ship through lock management system design way in river based RFID. Thus visualized and digitalized management of ship through lock were realized. Analysis the focus of the system that basic components and function were characterized by its favorable openness and extensibility, the last of the analysis ship through lock fully automated management method on the basis of internet in river. This method has finished ship through lock procedure in river to not stop bank, serves convenience shortcut, has broad prospects.


Sign in / Sign up

Export Citation Format

Share Document