A Verification and Validation Study of CFD Simulation of Wind-Induced Ventilation on Building with Single-Sided Opening

2014 ◽  
Vol 554 ◽  
pp. 696-700 ◽  
Author(s):  
Nur Farhana Mohamad Kasim ◽  
Sheikh Ahmad Zaki ◽  
Mohamed Sukri Mat Ali ◽  
Ahmad Faiz Mohammad ◽  
Azli Abd Razak
Keyword(s):  
Open Source Software ◽  
Natural Ventilation ◽  
Cfd Simulation ◽  
Previous Experiment ◽  
Experimental Methods ◽  
Verification And Validation ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Computational Fluid Dynamics Cfd ◽  
Model Approach

Wind-induced ventilation is widely acknowledged as one of the best approaches for inducing natural ventilation. Computational fluid dynamics (CFD) technique is gaining popularity among researchers as an alternative for experimental methods to investigate the behavior of wind-driven ventilation in building. In this present paper, Reynolds averaged Navier-Stokes equation (RANS) k-ε model approach is considered to simulate the airflow on a simplified cubic building with an opening on a single façade. Preliminary simulation using models from previous experiment indicates the reliability of OpenFOAM, the open source software that will be used in this study. The results obtained in this study will better define options for our future study which aims to explore how different buildings arrays modify the airflow inside and around a naturally ventilated building.

OPEN SOURCE COMPUTATIONS OF PLANING HULL RESISTANCE

2015 ◽  
Vol 157 (B2) ◽  
Author(s):  
M Ferrando ◽  
S Gaggero ◽  
D Villa
Keyword(s):  
Open Source ◽  
Navier Stokes ◽  
Experimental Measurements ◽  
Navier Stokes Equation ◽  
Free Surfaces ◽  
Hydrodynamic Parameters ◽  
Physical Problems ◽  
Engineering Problems ◽  
Simulation Strategy ◽  
Computational Fluid Dynamics Cfd

In recent years, the application of Computational Fluid Dynamics (CFD) methods experienced an exponential growth: the increase of the computational performances and the generalization of the Navier-Stokes equation to more complex physical problems made possible the solution of complex problems like free surfaces flows. The physical complexity of planing hulls flows poses some issues in the ability to numerically predict the global hydrodynamic parameters (hull resistance, dynamic attitude) of these configurations and on the expected confidence on the numerical results. In the last decade, commercial RANS software have been successfully applied for the prediction of the planing hull characteristics with reasonable correlation to the available experimental measurements. Recently, moreover, the interest in Open Source approaches, also for the solution of engineering problems, has rapidly grow. In this work, a set of calculations on a systematic series standard hull shape has been carried out, adopting from pre- to post- processing only Open Source tools. The comparison and the validation, through the available experimental measurements, of the computed results will define an optimal simulation strategy to include this kind of tools in the usual design loop.

scholarly journals ICCM2015: A Comparison of RANS and LES Computational Methods in Analyzing Ventilation Flow Through a Room Fitted with a Two-Sided Windcatcher

2017 ◽  
Vol 14 (03) ◽  
pp. 1750021 ◽  
Author(s):  
A. Niktash ◽  
B. P. Huynh
Keyword(s):  
Natural Ventilation ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Interior Space ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Through ◽  
Cfd Method ◽  
Good Agreement

A windcatcher is a structure for providing natural ventilation using wind power; it is usually fitted on the roof of a building to exhaust the inside stale air to the outside and supplies the outside fresh air into the building interior space working by pressure difference between outside and inside of the building. In this paper, the behavior of free wind flow through a three-dimensional room fitted with a centered position two-canal bottom shape windcatcher model is investigated numerically, using a commercial computational fluid dynamics (CFD) software package and LES (Large Eddy Simulation) CFD method. The results have been compared with the obtained results for the same model but using RANS (Reynolds Averaged Navier–Stokes) CFD method. The model with its surrounded space has been considered in both method. It is found that the achieved results for the model from LES method are in good agreement with RANS method’s results for the same model.

Verification and Validation of a Detonation Computational Fluid Dynamics Model

2016 ◽  
Vol 366 ◽  
pp. 40-46
Author(s):  
Rui Li Wang ◽  
Xiao Liang ◽  
Wen Zhou Lin ◽  
Xue Zhe Liu ◽  
Yun Long Yu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Simulation ◽  
Verification And Validation ◽  
Cfd Model ◽  
Dynamics Model ◽  
Computational Fluid Dynamics Model ◽  
Primary Means ◽  
Computational Fluid Dynamics Cfd ◽  
2D Space

Verification and validation (V&V) are the primary means to assess the accuracy and reliability in computational fluid dynamics (CFD) simulation. V&V of the multi-medium detonation CFD model is conducted by using our independently-developed software --- Lagrangian adaptive hydrodynamics code in the 2D space (LAD2D) as well as a large number of benchmark testing models. Specifically, the verification of computational model is based on the basic theory of the computational scheme and mathematical physics equations, and validation of the physical model is accomplished by comparing the numerical solution with the experimental data. Finally, some suggestions are given about V&V of the detonation CFD model.

Wave-in-Deck Load on a Jacket Platform, CFD Calculations Compared With Experiments

2014 ◽  
Author(s):  
Bogdan Iwanowski ◽  
Tone Vestbøstad ◽  
Marc Lefranc
Keyword(s):  
Free Surface ◽  
Industrial Application ◽  
Computational Models ◽  
Cfd Simulation ◽  
Navier Stokes ◽  
Extreme Wave ◽  
Navier Stokes Equation ◽  
Jacket Platform ◽  
Irregular Wave ◽  
Start Up

The paper presents an industrial application of CFD for calculation of Wave-In-Deck load due to an extreme wave. Particular attention is given to flow kinematics initialization that is necessary to start up a CFD simulation. The applied CFD code, ComFLOW, is a Navier-Stokes equation solver with an improved Volume of Fluid (iVOF) method employed to displace and re-construct fluids free surface. For incoming waves high enough for a negative air-gap and therefore with Wave-In-Deck loads, a jacket platform was tested in model basin, for both regular and irregular wave cases. One of goals of these model tests was verification of CFD codes. The experimental and computational models of the structure are exactly the same. In the paper, the measured Wave-In-Deck forces are compared with CFD results.

Prediction of Particle Impact on an Archimedes Screw Runner Blade for Micro Hydro Turbine

2013 ◽  
Vol 465-466 ◽  
pp. 552-556
Author(s):  
Muhammad Ammar Nik Mutasim ◽  
Nurul Suraya Azahari ◽  
Ahmad Alif Ahmad Adam
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Navier Stokes ◽  
Particle Impact ◽  
Three Dimensional Flow ◽  
Navier Stokes Equation ◽  
Runner Blade ◽  
Computational Fluid Dynamics Cfd ◽  
The Subject ◽  
The Impact

Energy is one of the most important sources in the world especially for developing countries. The subject study is conducted to predict the behaviour of particle due to errosion from the river through the achimedes screw runner and predict the impact of particle toward blade surface. For this reason, computational fluid dynamics (CFD) methods are used. The three-dimensional flow of fluid is numerically analyzed using the Navier-Stokes equation with standard k-ε turbulence model. The reinverse design of archimedes screw blade was refered with the previous researcher. Flow prediction with numerical results such as velocity streamlines, flow pattern and pressure contour for flow of water entering the blade are discussed. This study shows that the prediction of particle impact occurs mostly on the entering surface blade and along the leading edge of the screw runner. Any modification on the design of the screw runner blade can be analyze for further study.

Pumping Speed Measurement of the Rotary Vane Vacuum Pump by Using Numerical and Experimental Approaches

2014 ◽  
Author(s):  
M. Nadeem Azam ◽  
M. Umar ◽  
M. Maqsood ◽  
Imran Akhtar ◽  
Imran Aziz
Keyword(s):  
Internal Flow ◽  
Vacuum Pump ◽  
Assessment System ◽  
Navier Stokes ◽  
Vane Pump ◽  
Navier Stokes Equation ◽  
Time Shape ◽  
Experimental Approaches ◽  
Computational Fluid Dynamics Cfd ◽  
The One

Pumping speed is the main performance parameter of a vacuum pump. In the present work, pumping speed for a three-vane rotary vacuum pump is quantified using both experimental and numerical approaches. The numerical methodology assumes continuum flow (Knudsen number < 0.1), thus allowing the use of Navier Stokes equation. Commercial computational fluid dynamics (CFD) solver i.e. Fluent, is used to discretize the governing equations. Moving / dynamic mesh technique is used for the internal flow volumes of the pump to reproduce the change-in-time shape. Complete process starting from the CAD modeling to CFD simulations is discussed in detail. The adopted approaches are generic and can be used to find the pumping speed of any other rotary vane vacuum pump. The vane pump is also tested using an assessment system, which is constructed according to DIN28432 standard. Results of experimentally measured pumping speed are in good agreement with the one computed numerically.

CFD Simulation of Propeller and Tunnel Thruster Performance

2014 ◽  
Author(s):  
Ping Lu ◽  
Sue Wang
Keyword(s):  
Flow Field ◽  
Cfd Simulation ◽  
Open Water ◽  
Ship Hull ◽  
Hydrodynamic Performance ◽  
Navier Stokes ◽  
Computational Domain ◽  
Flow Features ◽  
Computational Fluid Dynamics Cfd ◽  
Drag And Lift

In the present study, the hydrodynamic performance of a typical North Sea dynamic positioning (DP) shuttle tanker consisting of two main propellers, two rudders, and two bow tunnel thrusters is investigated by solving Reynolds-averaged Navier-Stokes (RANS) equations for a viscous flow. The focus of the numerical simulation is on the performance of propellers/rudders and bow tunnel thrusters considering the hydrodynamic interactions between propellers/thrusters, hull and current. The numerical model includes hull, propeller, rudder, bow tunnel thruster and flow field. First, an analysis of a propeller performance in open water is carried out by calculating the coefficient of thrust, torque, and propeller efficiency. Then, rudders are included in the analysis for the assessment of propeller/rudder performance. The pressure distribution on rudders, rudder’s drag and lift coefficients for different angles of attack, and flow field around the rudder are obtained. The interaction effects between propeller, rudder, ship hull, as well as bow tunnel thruster and ship hull are analyzed by adding detailed ship hull geometry in the computational domain. The tunnel thruster efficiency reduction due to current and ventilation is also analyzed. The presence of current leads to significant changes in the flow velocity and distribution of pressure in the tunnel outflow area as well as significant deflection of the propeller jet emitting from the tunnel. A comparison between Computational Fluid Dynamics (CFD) and model test results of flow features near the tunnel area with various current speeds is presented.

scholarly journals The Efficient Application of an Impulse Source Wavemaker to CFD Simulations

2019 ◽  
Author(s):  
Pál Schmitt ◽  
Christian Windt ◽  
Josh Davidson ◽  
John V. Ringwood ◽  
Trevor Whittaker
Keyword(s):  
Shallow Water ◽  
Source Function ◽  
Cfd Simulation ◽  
Navier Stokes ◽  
Cfd Simulations ◽  
Wide Range ◽  
Rans Models ◽  
Hydrodynamic Processes ◽  
Computational Fluid Dynamics Cfd ◽  
Shallow Water Models

Computational Fluid Dynamics (CFD) simulations, based on Reynolds Averaged Navier Stokes (RANS) models, are a useful tool for a wide range of coastal and offshore applications, providing a high fidelity representation of the underlying hydrodynamic processes. Generating input waves in the CFD simulation is performed by a numerical wavemaker (NWM), with a variety of different NWM methods existing for this task. While NWMs, based on impulse source methods, have been widely applied for wave generation in depth averaged, shallow water models, they have not seen the same level of adoption in the more general RANS based CFD simulations, due to difficulties in relating the required impulse source function to the resulting free surface elevation for non-shallow water cases. This paper presents an implementation of an impulse source wavemaker, which is able to self-calibrate the impulse source function to produce a desired wave series in deep or shallow water at a specific point in time and space. Example applications are presented, for a numerical wave tank (NWT), based on the opensource CFD software OpenFOAM, for wave packets in deep and shallow water, highlighting the correct calibration of phase and amplitude. Also, the suitability for cases requiring very low reflection from NWT boundaries is demonstrated. Possible issues in the use of the method are discussed and guidance for good application is given.

scholarly journals CFD Simulation Study on the Performance of a Modified Ram Air Turbine (RAT) for Power Generation in Aircrafts

Fluids ◽  
2021 ◽  
Vol 6 (11) ◽  
pp. 391
Author(s):  
Magedi Moh M. Saad ◽  
Sofian Mohd ◽  
Mohd Fadhli Zulkafli ◽  
Nor Afzanizam Samiran ◽  
Djamal Hissein Didane
Keyword(s):  
Fossil Fuels ◽  
Cfd Simulation ◽  
Turbulence Modeling ◽  
3D Models ◽  
Navier Stokes ◽  
Axial Distance ◽  
Navier Stokes Equation ◽  
Auxiliary Power Unit ◽  
Auxiliary Power ◽  
Air Turbine

The present paper aims to study the possibility of dispensing an auxiliary power unit (APU) in an aircraft powered by fossil fuels to reduce air pollution. It particularly seeks to evaluate the amount of power generated by the ram air turbine (RAT) using the novel counter-rotating technique while characterizing its optimum axial distance. The ram air turbine (RAT), which is already equipped in aircrafts, was enhanced to generate the amount of energy produced by the APU. The approach was implemented by a CRRAT system. Six airfoil profiles were tested based on 2D models and the best airfoil was chosen for implantation on the RAT and CRRAT systems. The performance of the conventional single-rotor RAT and CRRAT were analyzed using FLUENT software based on 3D models. The adopted numerical scheme was the Navier–Stokes equation with k–ω SST turbulence modeling. The dynamic mesh and user-defined function (UDF) were used to revolve the rotor turbine via wind. The results indicated that the FX63-137 airfoil profile showed a higher performance in terms of the lift-to-drag ratio compared to the other airfoils. The optimum axial distance between the two rotors was 0.087 m of the rotor diameter and the efficiency of the new CRRAT increased to almost 45% compared to the single-rotor RAT.

scholarly journals Optimization of Window Positions for Wind-Driven Natural Ventilation Performance

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2464
Author(s):  
Nari Yoon ◽  
Mary Ann Piette ◽  
Jung Min Han ◽  
Wentao Wu ◽  
Ali Malkawi
Keyword(s):  
Architectural Design ◽  
Natural Ventilation ◽  
Cfd Simulation ◽  
Design Decision ◽  
Building Facades ◽  
Window Position ◽  
Computational Fluid Dynamics Cfd ◽  
Ventilation Performance ◽  
Energy Simulations ◽  
The Impact

This paper optimizes opening positions on building facades to maximize the natural ventilation’s potential for ventilation and cooling purposes. The paper demonstrates how to apply computational fluid dynamics (CFD) simulation results to architectural design processes, and how the CFD-driven decisions impact ventilation and cooling: (1) background: A CFD helps predict the natural ventilation’s potential, the integration of CFD results into design decision-making has not been actively practiced; (2) methods: Pressure data on building facades were obtained from CFD simulations and mapped into the 3D modeling environment, which were then used to identify optimal positions of two openings of a zone. The effect of the selected opening positions was validated with building energy simulations; (3) results: The cross-comparison study of different window positions based on different geographical locations quantified the impact on natural ventilation effectiveness; and (4) conclusions: The optimized window position was shown to be effective, and some optimal solutions contradicted the typical cross-ventilation strategy.

Sign in / Sign up

Export Citation Format

Share Document