Design and Evaluation of Stamping Module to Pattern Alignment Marks for LED Post-Processing

2015 ◽  
Vol 751 ◽  
pp. 298-301
Author(s):  
Young W. Sohn ◽  
Yong Ho Jeon ◽  
Tae Ho Seol ◽  
Hye Jin Lee ◽  
Moon G. Lee
Keyword(s):  
Post Processing ◽  
Light Emitting ◽  
Led Light ◽  
Post Process ◽  
Alignment Mark ◽  
Alignment Marks

LED (Light Emitting Device) is one of the most important and popular unit in display goods. Until now, the LED process could not make LED from broken substrates during production. This is because the damaged substrate cannot be post-processed by losing alignment mark on itself. After the substrate is pre-processed the substrate having LED dies are glued on blue tape. Therefore, if additional mark printed on the blue tape, it will be able to process the following post-process. In this paper, a precision stamping module to pattern the alignment mark on the blue tape is designed, fabricated and verified.

scholarly journals Design of a Secondary Freeform Lens of UV LED Mosquito-Trapping Lamp for Enhancing Trapping Efficiency

Crystals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 335 ◽  
Author(s):  
Wei-Hsiung Tseng ◽  
Diana Juan ◽  
Wei-Cheng Hsiao ◽  
Cheng-Han Chan ◽  
Hsin-Yi Ma ◽  
...  
Keyword(s):  
Light Intensity ◽  
Intensity Distribution ◽  
Light Emitting Diode ◽  
Trapping Efficiency ◽  
Axially Symmetric ◽  
Light Intensity Distribution ◽  
Light Emitting ◽  
Led Light ◽  
Uv Led ◽  
Freeform Lens

In this study, our proposed ultraviolet light-emitting diode (UV LED) mosquito-trapping lamp is designed to control diseases brought by insects such as mosquitoes. In order to enable the device to efficiently catch mosquitoes in a wider area, a secondary freeform lens (SFL) is designed for UV LED. The lens is mounted on a 3 W UV LED light bar as a mosquito-trapping lamp of the new UV LED light bar module to achieve axially symmetric light intensity distribution. The special SFL is used to enhance the trapping capabilities of the mosquito-trapping lamp. The results show that when the secondary freeform surface lens is applied to the experimental outdoor UV LED mosquito-trapping lamp, the trapping range can be expanded to 100π·m2 and the captured mosquitoes increased by about 300%.

scholarly journals Antarctic krill (Euphausia superba) exhibit positive phototaxis to white LED light

Polar Biology ◽  
2021 ◽  
Vol 44 (3) ◽  
pp. 483-489
Author(s):  
Bjørn A. Krafft ◽  
Ludvig A. Krag
Keyword(s):  
Antarctic Krill ◽  
Light Exposure ◽  
Euphausia Superba ◽  
Marine Species ◽  
Artificial Light ◽  
White Led ◽  
Light Emitting ◽  
Positive Phototaxis ◽  
Led Light ◽  
Exposure Experiment

AbstractThe use of light-emitting diodes (LEDs) is increasingly used in fishing gears and its application is known to trigger negative or positive phototaxis (i.e., swimming away or toward the light source, respectively) for some marine species. However, our understanding of how artificial light influences behavior is poorly understood for many species and most studies can be characterized as trial and error experiments. In this study, we tested whether exposure to white LED light could initiate a phototactic response in Antarctic krill (Euphausia superba). Trawl-caught krill were used in a controlled artificial light exposure experiment conducted onboard a vessel in the Southern Ocean. The experiment was conducted in chambers with dark and light zones in which krill could move freely. Results showed that krill displayed a significant positive phototaxis. Understanding this behavioral response is relevant to development of krill fishing technology to improve scientific sampling gear, improve harvest efficiency, and reduce potential unwanted bycatch.

scholarly journals Utjecaj različitog tipa umjetnog osvjetljenja na klijavost sjemena matovilca i kres salate

2017 ◽  
Vol 40 (6) ◽  
pp. 70-76
Author(s):  
Tomislav Vinković ◽  
Monika Tkalec ◽  
Nada Parađiković ◽  
MIro Stošić ◽  
Krunoslav Zmaić ◽  
...  
Keyword(s):  
Light Emitting Diodes ◽  
Light Emitting ◽  
Led Light

Cilj rada je bio utvrditi utjecaj LED (Light Emitting Diodes) i FLUO (fluorescentno svjetlo) osvjetljenja na klijavost i energiju klijanja sjemena te masu i visinu klijanaca matovilca i kres salate. Sjetva naturalnog sjemena provedena je u Petrijeve zdjelice u komori opremljenoj LED i FLUO lampama. LED lampe su bile opremljene crvenim (650-670 nm) i plavim (440-460 nm) LED diodama u omjeru 3:1. Istraživanje je provedeno u Laboratoriju za povrćarstvo, cvjećarstvo, ljekovito i začinsko bilje Poljoprivrednog fakulteta u Osijeku. Utvrđen je statistički opravdan utjecaj tipa osvjetljenja na energiju klijanja i klijavost sjemena matovilca, a veće vrijednosti utvrđene su uslijed primjene LED lampi. Suprotno, pod FLUO lampama je utvrđena značajno veća masa i visina klijanaca matovilca te visina klijanaca kres salate. Međutim, tip osvjetljenja nije značajno utjecao na klijavost i energiju klijanja te masu klijanaca kres salate. Prema tome, može se zaključiti da je odgovor na tip osvjetljenja uvjetovan biljnom vrstom već od samih početaka rasta i razvoja.

scholarly journals Thermal inactivation and growth potential of Listeria monocytogenes in smoked tench

2016 ◽  
Vol 5 (3) ◽  
Author(s):  
Raffaella Branciari ◽  
Andrea Valiani ◽  
Raffaella Franceschini ◽  
David Ranucci ◽  
Alessia Lupattelli ◽  
...  
Keyword(s):  
Experimental Study ◽  
Listeria Monocytogenes ◽  
Thermal Inactivation ◽  
Challenge Test ◽  
Listeria Innocua ◽  
Growth Potential ◽  
Post Processing ◽  
Colony Forming Unit ◽  
Post Process ◽  
Hygiene Measures

An experimental study for the evaluation of <em>Listeria monocytogenes</em> inactivation during a hot smoking process in tench was performed using <em>Listeria innocua</em> strains. Furthermore, the survival of <em>L. monocytogenes</em> in smoked tench was determined after post-processing in contaminated samples, evaluating the growth potential during storage. <em>L. innocua</em> was not detected after the smoking process. In the challenge test, the growth potential of <em>L. monocytogenes</em> was 5.68 log colony forming unit g<sup>−1</sup>. The results showed that hot smoking at an inner temperature around 72°C is able to eliminate the microorganism. Nevertheless, the product is able to support the growth of the pathogen if post-process contamination occurs, as the food is suitable for <em>Listeria</em> multiplication. Product recontamination should be prevented by means of appropriate application of hygiene measures.

Design of Photo-Induced Biofeedback Fabric and Study of its Influence on Brain Wave

2013 ◽  
Vol 311 ◽  
pp. 512-517
Author(s):  
Wei Cheng Chu ◽  
Hsin Ju Lin ◽  
Shu Ping Chiu
Keyword(s):  
Stress Relaxation ◽  
Optical Fiber ◽  
Visual System ◽  
Will Emit ◽  
Brain Wave ◽  
Light Emitting ◽  
Led Light ◽  
Stimulation Of

Because of stress and sleeping obstacle for 21th century people, the purpose of this study is to design a home decorative fabric which has the function of releasing from stress and enhancing sleeping quality. The optical fiber were sewn on the surface of optical fabric in form of three kinds of curvature patterns. Guiding the LED light into the optical fiber, the light will emit out of the optical fiber and stimulate our visual system in order to change the form of brain wave. Afterwards, the EEG instrument was used to evaluate the function of stress relaxation of such fabrics. The results were shown that human’s brain wave can be changed from relaxed and sober status to shallow-sleeping status after the stimulation of light emitting from the optical fiber fabrics. For the effect of causing shallow-sleeping status, female is more significant than male. Therefore, the light stimulating visual system by using the optical fiber fabrics can change the form of brain wave and achieve the effect of stress relaxation.

scholarly journals Different LED Light Wavelengths and Photosynthetic Photon Flux Density Effect on Colletotrichum acutatum Growth

Plants ◽  
2022 ◽  
Vol 11 (1) ◽  
pp. 143
Author(s):  
Neringa Rasiukevičiūtė ◽  
Aušra Brazaitytė ◽  
Viktorija Vaštakaitė-Kairienė ◽  
Alma Valiuškaitė
Keyword(s):  
Flux Density ◽  
Photosynthetic Photon Flux Density ◽  
Growth Characteristics ◽  
Colletotrichum Acutatum ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Photosynthetic Photon Flux ◽  
Light Emitting ◽  
Led Light ◽  
Fungus Growth

The study aimed to evaluate the effect of different photon flux density (PFD) and light-emitting diodes (LED) wavelengths on strawberry Colletotrichum acutatum growth characteristics. The C. acutatum growth characteristics under the blue 450 nm (B), green 530 nm (G), red 660 nm (R), far-red 735 nm (FR), and white 5700 K (W) LEDs at PFD 50, 100 and 200 μmol m−2 s−1 were evaluated. The effect on C. acutatum mycelial growth evaluated by daily measuring until five days after inoculation (DAI). The presence of conidia and size (width and length) evaluated after 5 DAI. The results showed that the highest inhibition of fungus growth was achieved after 1 DAI under B and G at 50 μmol m−2 s−1 PFD. Additionally, after 1–4 DAI under B at 200 μmol m−2 s−1 PFD. The lowest conidia width was under FR at 50 μmol m−2 s−1 PFD and length under FR at 100 μmol m−2 s−1 PFD. Various LED light wavelengths influenced differences in C. acutatum colonies color. In conclusion, different photosynthetic photon flux densities and wavelengths influence C. acutatum growth characteristics. The changes in C. acutatum morphological and phenotypical characteristics could be related to its ability to spread and infect plant tissues. This study’s findings could potentially help to manage C. acutatum by LEDs in controlled environment conditions.

scholarly journals On the implementation of post-processing of runoff forecast ensembles

2021 ◽  
Author(s):  
Jon Olav Skøien ◽  
Konrad Bogner ◽  
Peter Salamon ◽  
Fredrik Wetterhall
Keyword(s):  
Initial Conditions ◽  
Processing Parameters ◽  
Forecast Errors ◽  
Post Processing ◽  
Continental Scale ◽  
Post Process ◽  
Global Calibration ◽  
Calibration Methods ◽  
Verification Period ◽  
Ensemble Model Output Statistics

AbstractDifferent post-processing techniques are frequently employed to improve the outcome of ensemble forecasting models. The main reason is to compensate for biases caused by errors in model structure or initial conditions, and as a correction for under- or overdispersed ensembles. Here we use the Ensemble Model Output Statistics method to post-process the ensemble output from a continental scale hydrological model, LISFLOOD, as used in the European Flood Awareness System (EFAS). We develop a method for local calibration and interpolation of the post-processing parameters and compare it with a more traditional global calibration approach for 678 stations in Europe based on long term observations of runoff and meteorological variables. For the global calibration we also test a reduced model with only a variance inflation factor. Whereas the post-processing improved the results for the first 1-2 days lead time, the improvement was less for increasing lead times of the verification period. This was the case both for the local and global calibration methods. As the post-processing is based on assumptions about the distribution of forecast errors, we also present an analysis of the ensemble output that provides some indications of what to expect from the post-processing.

scholarly journals Compressive strength measurements of hybrid dental composites treated with dry heat and light emitting diodes (LED) post cure treatment

2014 ◽  
Vol 26 (3) ◽  
Author(s):  
Jenny Krisnawaty ◽  
Setiawan Natasasmita ◽  
Dudi Aripin
Keyword(s):  
Compressive Strength ◽  
Hybrid Composite ◽  
Light Emitting Diodes ◽  
Composite Resin ◽  
Hybrid Composites ◽  
Testing Machine ◽  
Dental Composite ◽  
Light Emitting ◽  
Led Light ◽  
Dry Heat

Hybrid composites are mostly used on large cavities as restorative dental materials, whether it is used directly or indirectly. The mechanical properties of composite resin shall increase if it is treated with post cure treatment. The aim of this study is to evaluate compressive strength differences between dry heat and Light Emitting Diodes (LED) treatment on the hybrid dental composite. A quasi-experimental was applied on this research with a total of 30 samples that were divided into two groups. Each sample was tested using LLOYD Universal Testing Machine with 1 mm/min speed to evaluate the compressive strength. The compressive strength results were marked when the sample was broken. The results of two groups were then analyzed using t-test statistical calculation. The results of this study show that post cure treatment on hybrid composite using LED light box (194.138 MPa) was lower than dry heat treatment (227.339 MPa), which was also significantly different from statistical analysis. It can be concluded that compressive strength of LED light box was lower than dry heat post-cure treatment on the hybrid composite resin.

scholarly journals PERANCANGAN ALAT PENDETEKSI KELAYAKAN OLI PADA KENDARAAN SEPEDA MOTOR BERBASIS ARDUINO UNO ATMEGA328

SIGMA TEKNIKA ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 179
Author(s):  
Muhammad Iirsyam
Keyword(s):  
Light Emitting Diode ◽  
Motor Vehicles ◽  
Light Reflection ◽  
Oil Viscosity ◽  
Light Emitting ◽  
Led Light ◽  
Detection Tool ◽  
Arduino Uno ◽  
Resistance Value ◽  
Oil Color

 AbstrakPada kendaraan bermotor pelumasan adalah suatu hal yang sangat penting. Pelumasan berfungsi untuk melumasi komponen logam atau metal yang bergesekan dalam mesin. Untuk menjaga performa mesin kendaraan tetap prima maka kita harus cermat dalam memilih jenis oli yang akan digunakan menurut tingkat kekentalan oli yang dibutuhkan oleh kendaraan yang kita gunakan. Selain itu pemeriksaan dan pergantian oli secara berkala berperan penting dalam menjaga awetnya mesin kendaraan.Untuk membantu dalam pengecekan oli bagi para pemilik kendaran bermotor dalam hal ini sepeda motor dalam itu peneliti merancang sebuah alat pendeteksi kelayakan oli pada kendaraan sepeda motor. Perubahan nilai resistansi dari sensor IR (Infrared Resistor) setelah menerima pantulan cahaya dari LED (Light Emitting Diode) yang diletakkan diatas permukaan oli menyebabkan tegangan yang diterima Arduino Uno microcontroller ATmega328 membaca perubahan warna oli pada sebuah baki oli sepeda motor. Kata kunci : Pengecekan oli, Pantulan cahaya LED, Arduino Uno   AbstractLubrication in motor vehicles is important, lubrication is not only serves to lubricate metal or metal touching or friction in the machine. To maintain the performance of the vehicle's engine is prime, we must carefully select the type of oil to be used according to the oil viscosity level required by the vehicle we use. In addition, inspection and oil change periodically play an important role in maintaining the vehicle's crew.To assist in oil checking for motorised owners in this motorcycle in this case the author devised an oil feasibility detection tool on a motorcycle vehicle. Changes in resistance value from IR sensor (Infrared Resistor) after receiving light reflection from LED (Light Emitting Diode) that is placed above the oil surface causing the received voltage Arduino Uno Microcontroller ATmega328 Read the changes Oil color on a motorcycle oil tray. Keywords: Oil checking, LED light reflection, Arduino Uno

Sign in / Sign up

Export Citation Format

Share Document