Comparison of Switching Angle Arrangement Techniques in Single-Phase Boost Multilevel Inverter for Low-THD Operation

2015 ◽  
Vol 793 ◽  
pp. 167-171
Author(s):  
Mohd Aizuddin Yusof ◽  
Yee Chyan Tan ◽  
M. Othman ◽  
S.S. Lee ◽  
M.A. Roslan ◽  
...  
Keyword(s):  
Output Voltage ◽  
Single Phase ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Solar Photovoltaic ◽  
Voltage Waveform ◽  
Voltage Level ◽  
Software Simulation ◽  
Multilevel Inverters ◽  
Simulation Results

Multilevel inverters are one of the preferred inverter choices for solar photovoltaic (PV) applications. While these inverters are capable of producing AC staircase output voltage waveform, the total harmonic distortion (THD) of the output voltage waveform can become worse if the switching angle of each voltage level is not carefully chosen. In this paper, four switching angle arrangement techniques are presented and the switching angles generated by these techniques are applied to a new single-phase boost multilevel (SPBM) inverter. The performance of 3-, 5-, 7-, 9-and 11-level SPBM inverter having four different sets of switching angles derived using the aforementioned techniques have been evaluated and compared using PSIM software. Simulation results show that one of the techniques is able to produce an output voltage waveform with the lowest THD, whilst the other generates an output voltage waveform with the highest fundamental voltage component.

scholarly journals A New Seven Level Symmetrical Inverter with Reduced Switch Count

2018 ◽  
Vol 9 (2) ◽  
pp. 921
Author(s):  
Thiyagarajan V. ◽  
Somasundaram P.
Keyword(s):  
Output Voltage ◽  
Single Phase ◽  
Multilevel Inverter ◽  
Voltage Waveform ◽  
Multilevel Inverters ◽  
Minimum Number ◽  
Simulation Results ◽  
Electro Magnetic ◽  
Commercial Applications ◽  
The Cost

<span>Multilevel inverters offers less distortion and less electro-magnetic interference compared with other conventional inverters and hence, it can be used in many industrial and commercial applications.  This paper analyze the performance of the modified single phase seven level symmetrical inverter using minimum number of switches. The proposed topology consists of six switches and two dc sources, and produces seven level output voltage waveform during symmetric operation. The cost and size of the propsoed inverter minimum as it uses minimum number of components, The performance of the proposed multilevel inverter is analysed for different switching angles and the corresponding simulation results are presented. The simulation of the proposed inverter is carried out using MATLAB/Simulink software.</span>

scholarly journals Standalone Operation of Modified Seven-Level Packed U-Cell (MPUC) Single-Phase Inverter

Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 268 ◽  
Author(s):  
Ali Shojaei ◽  
Bahram Najafi ◽  
Hani Vahedi
Keyword(s):  
Output Voltage ◽  
Single Phase ◽  
Multilevel Inverter ◽  
Switching Frequency ◽  
Voltage Waveform ◽  
Multilevel Inverters ◽  
Design Considerations ◽  
Single Phase Inverter ◽  
Load Types ◽  
Switch Voltage

In this paper the standalone operation of the modified seven-level Packed U-Cell (MPUC) inverter is presented and analyzed. The MPUC inverter has two DC sources and six switches, which generate seven voltage levels at the output. Compared to cascaded H-bridge and neutral point clamp multilevel inverters, the MPUC inverter generates a higher number of voltage levels using fewer components. The experimental results of the MPUC prototype validate the appropriate operation of the multilevel inverter dealing with various load types including motor, linear, and nonlinear ones. The design considerations, including output AC voltage RMS value, switching frequency, and switch voltage rating, as well as the harmonic analysis of the output voltage waveform, are taken into account to prove the advantages of the introduced multilevel inverter.

scholarly journals A Single Source Switched-Capacitor 13-Level Inverter with Triple Voltage Boosting and Reduced Component Count

Electronics ◽  
2021 ◽  
Vol 10 (19) ◽  
pp. 2321
Author(s):  
Mohammad Tayyab ◽  
Adil Sarwar ◽  
Irfan Khan ◽  
Mohd Tariq ◽  
Md Reyaz Hussan ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Output Voltage ◽  
Multilevel Inverter ◽  
Switched Capacitor ◽  
Single Source ◽  
Level Control ◽  
Voltage Waveform ◽  
Voltage Level ◽  
Fundamental Cycle ◽  
Simulation Results

A new triple voltage boosting switched-capacitor multilevel inverter (SCMLI) is presented in this paper. It can produce 13-level output voltage waveform by utilizing 12 switches, three diodes, three capacitors, and one DC source. The capacitor voltages are self-balanced as all the three capacitors present in the circuit are connected across the DC source to charge it to the desired voltage level for several instants in one fundamental cycle. A detailed comparative analysis is carried to show the advantages of the proposed topology in terms of the number of switches, number of capacitors, number of sources, total standing voltage (TSV), and boosting of the converter with the recently published 13-level topologies. The nearest level control (NLC)-based algorithm is used for generating switching signals for the IGBTs present in the circuit. The TSV of the proposed converter is 22. Experimental results are obtained for different loading conditions by using a laboratory hardware prototype to validate the simulation results. The efficiency of the proposed inverter is 97.2% for a 200 watt load.

Performance Analysis of a Half Bridge Cell Based Asymmetrical Multilevel Inverter Topology with Minimum Components

2020 ◽  
Vol 13 (4) ◽  
pp. 531-545
Author(s):  
Abeera D. Roy ◽  
Chandrahasan Umayal
Keyword(s):  
Output Voltage ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Simulation Environment ◽  
Level Control ◽  
Voltage Waveform ◽  
Multilevel Inverters ◽  
Different Types ◽  
Performance Abilities ◽  
Inverter Topology

Background: In Multilevel Inverters (MLI) as the number of level increases, there is a proportionate increase in the count of the semiconductor devices that are employed. Methods: This paper deals with an asymmetrical cascaded H-bridge inverter topology with half bridge cells to produce seven level output voltage waveform. Nearest Level Control (NLM) technique is used to produce the switching pulses. The operating principle of the proposed MLI and its performance abilities is verified through MATLAB/Simulink and a prototype is developed to provide the experimental results. Results: Total Harmonic Distortion (THD) is computed for proposed MLI for different types of loads in simulation environment as well as in the developed hardware prototype. Comparison between the proposed MLI and recent topologies demonstrates the advantageous features. Conclusion: The simulation and hardware results confirm the suitability of the proposed seven level MLI as the total component count, and the requirement of DC sources reduces considerably.

Simulation and Analysis of Novel Extendable Multilevel Inverter Topology

2019 ◽  
Vol 28 (06) ◽  
pp. 1950089 ◽  
Author(s):  
V. Thiyagarajan ◽  
P. Somasundaram ◽  
K. Ramash Kumar
Keyword(s):  
Single Phase ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Voltage Waveform ◽  
Dc Voltage ◽  
Switching Losses ◽  
Comparison Results ◽  
Symmetrical Condition ◽  
Gate Driver ◽  
Inverter Topology

Multilevel inverter (MLI) has become more popular in high power, high voltage industries owing to its high quality output voltage waveform. This paper proposes a novel single phase extendable type MLI topology. The term ‘extendable’ is included since the presented topology can be extended with maximum number of dc voltage sources to synthesize larger output levels. This topology can be operated in both symmetrical and asymmetrical conditions. The major advantages of the proposed inverter topology include minimum switching components, reduced gate driver circuits, less harmonic distortion and reduced switching losses. The comparative analysis based on the number of switches, dc voltage sources and conduction switches between the proposed topology and other existing topologies is presented in this paper. The comparison results show that the proposed inverter topology requires fewer components. The performance of the proposed MLI topology has been analyzed in both symmetrical and asymmetrical conditions. The simulation model is developed using MATLAB/SIMULINK software to verify the performance of the proposed inverter topology and also the feasibility of the presented topology during the symmetrical condition has been validated experimentally.

scholarly journals Improved reliable multilevel inverter for renewable energy systems

2019 ◽  
Vol 14 (3) ◽  
pp. 1141
Author(s):  
Sujatha M ◽  
A.K. Parvathy
Keyword(s):  
Renewable Energy ◽  
Simulation Model ◽  
Output Voltage ◽  
Energy Systems ◽  
Multilevel Inverter ◽  
Voltage Level ◽  
Renewable Energy Systems ◽  
Matlab Simulink ◽  
Multilevel Inverters ◽  
Main Drawback

<p>New improved multilevel inverter (MLI) topology for Renewable energy systems is proposed in this paper. Cascaded multilevel inverters (CMLI) produce an output voltage level depending on the number of individual sources connected. The main drawback of CMLI is, as the output voltage level increases in number, the switches used in the device also increases and hence the complexity of the circuit increases. As the number of switches increases, the reliability of the circuit decreases. In this paper a novel MLI topology, which employs lesser number of switches, is proposed. A simulation model of CMLI and the proposed MLI has been built in MATLAB/SIMULINK. The reliability of the CMLI and the new topology MLI is analyzed by using MIL-HDBK-217.  </p>

scholarly journals Solar Photovoltaic System-Based Reduced Switch Multilevel Inverter for Improved Power Quality

2022 ◽  
Vol 4 (1) ◽  
pp. 1-13
Author(s):  
Madhu Andela ◽  
Ahmmadhussain Shaik ◽  
Saicharan Beemagoni ◽  
Vishal Kurimilla ◽  
Rajagopal Veramalla ◽  
...  
Keyword(s):  
Output Voltage ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Photovoltaic System ◽  
Solar Photovoltaic ◽  
Switching Losses ◽  
Minimum Number ◽  
Multi Level ◽  
Solar Photovoltaic System

This paper deals with a reduced switch multi-level inverter for the solar photovoltaic system-based 127-level multi-level inverter. The proposed technique uses the minimum number of switches to achieve the maximum steps in staircase AC output voltage when compared to the flying capacitor multi-level inverter, cascaded type multilevel inverter and diode clamped multi-level inverter. The use of a minimum number of switches decreases the cost of the system. To eliminate the switching losses, in this topology a square wave switch is used instead of pulse width modulation. Thereby the total harmonic distortion (THD) and harmonics have been reduced in the pulsating AC output voltage waveform. The performance of 127-level MLI is compared with 15 level, 31-level and 63-level multilevel inverters. The outcomes of the solar photovoltaic system-based 127-level multi-level inverter have been simulated in a MATLAB R2009b environment.

scholarly journals Performance evaluation and comparison of diode clamped multilevel inverter and hybrid inverter based on PD and APOD modulation techniques

2019 ◽  
Vol 8 (2) ◽  
pp. 143
Author(s):  
N. Susheela ◽  
P. Satish Kumar
Keyword(s):  
Pulse Width ◽  
Single Phase ◽  
Pulse Width Modulation ◽  
Control Method ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Multilevel Inverters ◽  
Number Of Components ◽  
Modulation Techniques ◽  
Modulation Methods

<p>The popularity of multilevel inverters have increasing over the years in various applications without use of a transformer and has many benefits. This work presents the performance and comparative analysis of single phase diode clamped multilevel inverter and a hybrid inverter with reduced number of components. As there are some drawbacks of diode clamped multilevel inverter such as requiring higher number of components, PWM control method is complex and capacitor voltage balancing problem, an implementation of hybrid inverter that requires fewer components and less carrier signals when compared to conventional multilevel inverters is discussed. The performance of single phase diode clamped multilevel inverter and hybrid multilevel inverter for seven, nine and eleven levels is performed using phase disposition, alternate phase opposition disposition sinusoidal pulse width modulation techniques. Both the multilevel inverter are implemented for the above mentioned multicarrier based Pulse Width Modulation methods for R and R-L loads.  The total harmonic distortion is evaluated at various modulation indices. The analysis of the multilevel inverters is done by simulation in matlab / simulink environment.</p>

scholarly journals Multicarrier PWM Strategies for Hybrid Symmetrical Multilevel Inverter with Reduced Switch Count

2020 ◽  
Vol 9 (5) ◽  
pp. 860-866
Keyword(s):  
Electromagnetic Interference ◽  
Output Voltage ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Total Harmonic Distortion ◽  
Switching Frequency ◽  
Third Harmonic ◽  
Multilevel Inverters ◽  
High Switching Frequency

Multilevel inverters are widely used for high power and high voltage applications. The performance of multilevel inverters are superior to conventional two level inverters in terms of reduced total harmonic distortion, higher dc link voltages, lower electromagnetic interference and increased quality in the output voltage waveform. This paper presents a single phase hybrid eleven level multilevel inverter topology with reduced switch count to compensate the above mentioned disadvantages. This paper also presents various high switching frequency based multi carrier pulse width modulation strategies such as Phase Disposition PWM Strategy (PDPWM), Phase Opposition and Disposition PWM Strategy (PODPWM), Alternate Phase opposition Disposition PWM (APODPWM), Carrier Overlapping PWM (COPWM), Variable frequency carrier PWM (VFPWM), Third Harmonic Injection PWM (TFIPWM) applied to the proposed eleven level multilevel inverter and is analyzed for RL load. FFT analysis is carried out and total harmonic distortion, fundamental output voltage are calculated. Simulation is carried out in MATLAB/SMULINK.

scholarly journals Design of new structure of multilevel inverter based on modified absolute sinusoidal PWM technique

2021 ◽  
Vol 12 (4) ◽  
pp. 2314
Author(s):  
Asef A. Saleh ◽  
Rakan Khalil Antar ◽  
Harith Ahmed Al-Badrani
Keyword(s):  
Output Voltage ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Power Circuit ◽  
Zero Level ◽  
Multilevel Inverters ◽  
Simulink Simulation ◽  
High Output Voltage ◽  
Sinusoidal Pulse Width Modulation

The advantage of multilevel inverters is to produce high output voltage values with distortion as minimum as possible. To reduce total harmonic distortion (THD) and get an output voltage with different step levels using less power electronics switching devices, 15-level inverter is designed in this paper. Single-phase 11-switches with zero-level (ZL) and none-zero-level (NZL) inverter based on modified absolute sinusoidal pulse width modulation (MASPWM) technique is designed, modelled and built by MATLAB/Simulink. Simulation results explained that, multilevel inverter with NZL gives distortion percent less than that with ZL voltage. The THD of the inverter output voltage and current of ZL are 4% and 1%, while with NZL is 3.6% and 0.84%, respectively. These results explain the effectiveness of the suggested power circuit and MASPWM controller to get the required voltage with low THD.

Sign in / Sign up

Export Citation Format

Share Document