Bond Strength between Steel and Concrete Experiment Analysis at Different Temperatures

2014 ◽  
Vol 1065-1069 ◽  
pp. 1977-1980
Author(s):  
Tao Zou ◽  
Yu Lai Han
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Theoretical Consideration ◽  
Relative Slip ◽  
Axial Tension ◽  
Data Segment ◽  
Depth Study ◽  
Different Temperatures ◽  
Bonding Properties ◽  
Experiment Analysis

It is known in the literature, at different temperatures bond strength bond between steel and concrete and relevant test data segment free end slip magnitude rarely, it is necessary to study this type of test, in order to more in-depth study of steel and variation between concrete bonding properties at different temperatures in order to verify different temperatures we derive between steel and concrete expressions are appropriate bond stress and slip. This test is primarily measured under different temperature conditions, reinforced concrete specimens under axial tension force central role, respectively, at the free end of the specimen and loading end bond segment relative slip steel and concrete at different temperatures . Because when the temperature reaches about 200 °C, the specimen began to appear on the adhesive debonding phenomenon, so this calculation is only done by experiments and theoretical consideration a temperature in the range of 20 °C to 190 °C.

Experimental Research on Bond Strength between Rebar and Concrete after High Temperature

2011 ◽  
Vol 71-78 ◽  
pp. 1057-1061 ◽  
Author(s):  
Ke Fang Yin ◽  
Yang Han ◽  
Yi Liu
Keyword(s):  
Reinforced Concrete ◽  
High Temperature ◽  
Bond Strength ◽  
Experimental Research ◽  
Bonding Strength ◽  
Different Temperatures ◽  
Ultimate Bond Strength

With the centrally pulling-out test, the bond strength of reinforced concrete is measured with different temperatures and different cooling ways after high temperature; and the ultimate bond strength and slip of reinforced and concrete under different conditions are analyzed. The results show that the bonding strength declines gradually with the increase of temperature, and the ultimate slippage also decreases gradually.

scholarly journals Bamboo Concrete Bond Strength

2019 ◽  
Vol 9 (1) ◽  
pp. 747-752
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Large Scale ◽  
Tropical Country ◽  
Suitable Material ◽  
Steel Reinforced Concrete ◽  
Pull Out ◽  
Structural Applications ◽  
Bonding Properties ◽  
Bamboo Reinforcement

Bamboo reinforced concrete is expected to be an alternative to steel reinforced concrete as a building material. Steel, when used for construction activities, is energy intensive and causes pollution. In this context, the use of bamboo, which is a fast growing, affordable and ecologically friendly solution; especially in a tropical country like India, is being considered as a suitable material for structural applications. It is potentially superior to steel in terms of its weight to strength ratio. However, the bond strength is a major concern for the bamboo to be a reinforcement in structural composites. The goal of this paper is to investigate the bonding properties of a newly developed bamboo-reinforcement composite in concrete, through pull-out tests. Various coatings are applied to the bamboo to determine the different bonding behaviours between the concrete and newly developed BRC. To improve the bonding at interfacial of bamboo concrete composite; easily applicable, adoptable and economical technology have been developed. The results of this study demonstrate that the bamboo-reinforcement composite develops adequate bonding with the concrete matrix with the hope that the newly developed material could contribute, on a large scale, to sustainable development.

Methodology of studying the mechanical properties of composite materials (reinforced concrete)

2018 ◽  
Vol 84 (12) ◽  
pp. 61-67
Author(s):  
V. A. Eryshev
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Experimental Studies ◽  
Analytical Relationship ◽  
Hardened Concrete ◽  
Deformation Model ◽  
Joint Work ◽  
Concrete Shrinkage ◽  
Axial Tension ◽  
Tension And Compression

The mechanical properties of a complex composite material formed by steel and hardened concrete, are studied. A technique of operative quality control of new credible concrete and reinforcement, both in laboratory and field conditions is developed for determination of the strength and strain characteristics of materials, as well as cohesion forces determining their joint operation under load. The design of the mobile unit is presented. The unit provides a possibility of changing the direction of loading and testing the reinforced element of the given shape both for tension and compression. Moreover, the nomenclature of testing equipment and the number of molds for manufacturing concrete samples substantially decrease. Using the values of forcing resulting in concrete cracking when the joint work of concrete and reinforcement is disrupted the values of the inherent stresses and strains attributed to the concrete shrinkage are determined. An analytical relationship between the forces and deformations of the reinforced concrete sample with central reinforcement is derived for axial tension and compression, with allowance for strains and stresses in the reinforcement and concrete resulted from concrete shrinkage. The results of experimental studies are presented, including tension diagrams and diagrams of developing axial deformations with an increase in the load under the central loading of the reinforced elements. A methodology of accounting for stresses and deformations resulted from concrete shrinkage is developed. The applicability of the derived analytical relationships between stresses and deformations on the material diagrams to calculations of the reinforced concrete structures in the framework of the deformation model is estimated.

scholarly journals Fiber type influence on the reinforced concrete under axial tension

2021 ◽  
Vol 1162 (1) ◽  
pp. 012016
Author(s):  
M Surianinov ◽  
D Kirichenko ◽  
I Korneieva ◽  
S Neutov
Keyword(s):  
Reinforced Concrete ◽  
Fiber Type ◽  
Axial Tension

scholarly journals Numerical Modelling of Reinforced Concrete Slender Walls Subjected to Coupled Axial Tension–Flexure

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Xiaowei Cheng ◽  
Haoyou Zhang
Keyword(s):  
Reinforced Concrete ◽  
Plastic Hinge ◽  
Element Model ◽  
Lateral Loading ◽  
Design Parameters ◽  
Seismic Behaviour ◽  
High Rise ◽  
Ultimate Deformation ◽  
Axial Tension ◽  
Plastic Hinge Length

AbstractUnder strong earthquakes, reinforced concrete (RC) walls in high-rise buildings, particularly in wall piers that form part of a coupled or core wall system, may experience coupled axial tension–flexure loading. In this study, a detailed finite element model was developed in VecTor2 to provide an effective tool for the further investigation of the seismic behaviour of RC walls subjected to axial tension and cyclic lateral loading. The model was verified using experimental data from recent RC wall tests under axial tension and cyclic lateral loading, and results showed that the model can accurately capture the overall response of RC walls. Additional analyses were conducted using the developed model to investigate the effect of key design parameters on the peak strength, ultimate deformation capacity and plastic hinge length of RC walls under axial tension and cyclic lateral loading. On the basis of the analysis results, useful information were provided when designing or assessing the seismic behaviour of RC slender walls under coupled axial tension–flexure loading.

New Research on the Use of Hardening Plastics for Aircraft Construction

1940 ◽  
Vol 44 (349) ◽  
pp. 44-73
Author(s):  
Wilhelm Kuech
Keyword(s):  
Strength Properties ◽  
Dynamic Loads ◽  
Absorbed Energy ◽  
Good Strength ◽  
Different Temperatures ◽  
Bonding Properties ◽  
Static And Dynamic Loads ◽  
Impact Bending ◽  
New Research ◽  
Laminated Materials

Laminated materials incorporating plastics seem to be especially well suited lor highly stressed aircraft components, by reason of their good strength properties. Paper, fabric and wood veneers treated with plastics on a phenolic basis were tested with regard to their strength, especially in bending, shear, absorbed energy in impact bending, notching strength and in their resistance against moisture. Further, the behaviour of compressed plastics was studied at different temperatures under static and dynamic loads. A part of the research was extended to pure phenol resin and to thermoplastics based on methacrylate and polyvinylchloride. The bonding properties of laminated compressed plastics were established. Concluding, some experiments relating to the practical manufacture of aeroplane components are communicated.

Experimental Research on Reinforcing Effect of Spiral Steel Fiber

2012 ◽  
Vol 174-177 ◽  
pp. 668-671
Author(s):  
He Ting Zhou
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Experimental Research ◽  
Significant Role ◽  
Steel Fiber ◽  
Cement Mortar ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Steel Fiber Reinforced Concrete ◽  
Reinforcing Effect

Steel fiber has a fine nature in reinforcing concrete. This essay aims to find out the influence of physical forms of steel fiber on its nature of reinforcement. By comparing two types of cement mortar reinforced by steel fibers, it is found that spiral steel fibers have a better bond strength with matrix than straight ones. Therefore, a conclusion could be drawn that physical forms of the steel fiber play a significant role in steel fiber reinforced concrete, and the experiment also serves a rewarding reference to the application of spiral steel fibers.

Sign in / Sign up

Export Citation Format

Share Document