In Situ Fabrication of Nanoscale Graphene Oxide/Polyaniline Composite and its Electrochemical Properties

2010 ◽  
Vol 148-149 ◽  
pp. 1547-1550 ◽  
Author(s):  
Hua Lan Wang ◽  
Qing Li Hao ◽  
Xi Feng Xia ◽  
Zhi Jia Wang ◽  
Jiao Tian ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
In Situ Polymerization ◽  
Ammonium Persulfate ◽  
Polymerization Process ◽  
Electrochemical Test ◽  
X Ray ◽  
Transmission Electron

A graphene oxide/polyaniline composite was synthesized by an in situ polymerization process. This product was simply prepared in an ethylene glycol medium, using ammonium persulfate as oxidant in ice bath. The composite was characterized by field emission scanning electron microscopy, transmission electron microscopy, X-Ray photoelectron spectroscopy, Raman spectroscopy and electrochemical test. The composite material showed a good electrochemical performance.

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

Morphology of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization

2013 ◽  
Vol 457-458 ◽  
pp. 244-247
Author(s):  
Min Li ◽  
Li Guang Xiao ◽  
Hong Kai Zhao
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
In Situ Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reflection Peak ◽  
Basal Reflection ◽  
Scanning Electron

Polyethylene/montmorillonite (PE/MMT) nanocomposites were prepared by in situ polymerization. The morphology of MMT/MgCl2/TiCl4 catalyst and PE/MMT nanocomposites was investigated by scanning electron microscopy (SEM). It can be seen that MMT/MgCl2/TiCl4 catalyst remained the original MMT sheet structures and many holes were found in MMT and the morphology of PE/MMT nanocomposites is part of the sheet in the form of existence, as most of the petal structure. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were carried out to characterize all the samples. XRD results reveal that the original basal reflection peak of PEI1 and PEI2 disappears completely and that of PEI3 become very weak. MMT/MgCl2/TiCl4 catalyst was finely dispersed in the PE matrix. Instead of being individually dispersed, most layers were found in thin stacks comprising several swollen layers.

Surface nitridation of Ta powder by molten-salt electrolysis of Ta2O5 under N2 atmosphere

2020 ◽  
Vol 13 (07) ◽  
pp. 2050032
Author(s):  
Qing Huang ◽  
Guojin Zheng ◽  
Tian Wu
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Cell Voltage ◽  
X Ray Diffraction ◽  
Molten Salt Electrolysis ◽  
X Ray ◽  
Structured Catalysts ◽  
Transmission Electron ◽  
N2 Atmosphere

The electro-deoxidation of Ta2O5 in molten CaCl2 under N2 atmosphere is a facile way for the in situ surface nitridation of Ta particles. The cell voltage and electrolysis time of Ta2O5 are rationalized to realize the in situ surface nitridation of Ta. All the characterization results including X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and elements mapping as well as X-ray photoelectron spectroscopy (XPS) confirm the formation of Ta2N layers on the surface of Ta particles, with the thickness of 3–4[Formula: see text]nm. This method provides a strategy for the facile in situ surface nitridation with N2 as the nitrogen source for the fabrication of core-shell structured catalysts.

scholarly journals In Situ and In Operando Techniques to Study Li-Ion and Solid-State Batteries: Micro to Atomic Level

Inorganics ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 85
Author(s):  
Maryam Golozar ◽  
Raynald Gauvin ◽  
Karim Zaghib
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Atomic Level ◽  
X Ray ◽  
In Situ Techniques ◽  
Transmission Electron ◽  
Wide Range ◽  
Li Ion

This work summarizes the most commonly used in situ techniques for the study of Li-ion batteries from the micro to the atomic level. In situ analysis has attracted a great deal of interest owing to its ability to provide a wide range of information about the cycling behavior of batteries from the beginning until the end of cycling. The in situ techniques that are covered are: X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Scanning Transmission Electron Microscopy (STEM). An optimized setup is required to be able to use any of these in situ techniques in battery applications. Depending on the type of data required, the available setup, and the type of battery, more than one of these techniques might be needed. This study organizes these techniques from the micro to the atomic level, and shows the types of data that can be obtained using these techniques, their advantages and their challenges, and possible strategies for overcoming these challenges.

Evaluation of Antimicrobial, Structural, Magnetic, and Thermal Potential of Silver Nanoparticles Anchored Polyaniline-Itaconic Acid-CuO Nanocomposites Synthesized From In-Situ Polymerization Method

2021 ◽  
Author(s):  
Parthiban E ◽  
Sudarsan S
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Itaconic Acid ◽  
In Situ Polymerization ◽  
Polymeric Nanocomposites ◽  
X Ray ◽  
Betel Leaf ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron

Abstract The silver nanoparticles (AgNPs) have been embedded within the itaconic acid (IA), polyaniline (PANi), and copper oxide (CuO) to form Ag@PANi-IA-CuO polymeric nanocomposites. In-situ polymerization of itaconic acid has been carried out in the presence of aniline monomers using anhydrous iron trichloride as an oxidising agent. The piper betel leaf extract was used to a reduction of AgNO3. The anchoring of AgNPs onto nanocomposite has been characterized using different techniques such as Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED) X-ray diffraction (XRD), and energy-dispersive X-ray (EDX). Biological, magnetic, and thermal properties of nanocomposites have also been studied in antimicrobial, vibrating sample magnetometer (VSM), and thermogravimetric analysis (TGA). Hence, these types of silver nanoparticles anchored polyaniline-itaconic acid-CuO nanocomposite has shown an attractive application in the field of biomedical and wastewater treatment.

Synthesis, Characterization and Thermal Analysis of Rod-Shaped Polyaniline-Barium Ferrites Nanocomposites

2010 ◽  
Vol 150-151 ◽  
pp. 386-390
Author(s):  
Yuan Xun Li ◽  
Ying Li Liu ◽  
Huai Wu Zhang ◽  
Wei Wei Ling
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Barium Ferrite ◽  
In Situ Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Barium Ferrites ◽  
Thermal Stability Of

The rod-shaped polyaniline (PANI)-barium ferrite nanocomposites were synthesized by in situ polymerization of aniline in the presence of BaFe12O19 nanoparticles with diameters of 60-80 nm. The composites obtained were characterized by infrared spectra (IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The thermal stability and the composition of the composites were investigated by TG-DTG analysis. The results indicate that the thermal stability of the composites is higher than that of the pure PANI which can be attributed to the interactions existed between PANI chains and ferrite particles.

scholarly journals Plasmon Sensitized Heterojunction 2D Ultrathin Ag/AgI-δ-Bi2O3 for Enhanced Photocatalytic Nitrogen Fixation

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 781 ◽  
Author(s):  
Xiaoming Gao ◽  
Yanyan Shang ◽  
Kailong Gao ◽  
Feng Fu
Keyword(s):  
Electron Microscopy ◽  
Nitrogen Fixation ◽  
Photoelectron Spectroscopy ◽  
Separation Efficiency ◽  
Average Height ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sacrificial Agent

A novel 2D ultrathin Ag/AgI-δ-Bi2O3 photocatalyst was constructed by a facile hydrothermal and in situ photodeposition method, which presented a uniform nanosheet structure with an average height of 6 nm. Its composition, morphology and light-harvesting properties were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–vis spectrophotometer (UV–vis) and photoluminescence (PL) measurements in detail. The Ag/AgI-δ-Bi2O3 nanocomposites showed an excellent photocatalytic nitrogen fixation performance of 420 μmol L−1 g−1 h−1 in water without any sacrificial agent. The introduction of Ag/AgI nanoparticles caused the morphology modification of δ-Bi2O3, a higher concentration of oxygen vacancy, and the construction of a plasmon sensitized heterojunction, resulting in enhanced light absorption, improved separation efficiency of charge carriers and strong N2 absorption and activation ability, which are responsible for the superior photocatalytic performance of Ag/AgI-δ-Bi2O3.

scholarly journals Zirconia Reduced Graphene Oxide Nano-Hybrid Structure Fabricated by the Hydrothermal Reaction Method

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 687 ◽  
Author(s):  
Anton Smirnov ◽  
Nestor Washington Solís Pinargote ◽  
Nikita Peretyagin ◽  
Yuri Pristinskiy ◽  
Pavel Peretyagin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Hydrothermal Reaction ◽  
Hybrid Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Nanocomposite Powders

In this work, we report an available technique for the effective reduction of graphene oxide (GO) and the fabrication of nanostructured zirconia reduced graphene oxide powder via a hydrothermal method. Characterization of the obtained nano-hybrid structure materials was carried out using a scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). The confirmation that GO was reduced and the uniform distribution of zirconia nanoparticles on graphene oxide sheets during synthesis was obtained due to these techniques. This has presented new opportunities and prospects to use this uncomplicated and inexpensive technique for the development of zirconia/graphene nanocomposite powders.

Preparation and characterization of a copper@polyimide core–shell structure via an in situ induction/imidization route

2016 ◽  
Vol 29 (5) ◽  
pp. 569-574
Author(s):  
Haoran Zhou ◽  
Dexin Wang ◽  
Chunyan Qu ◽  
Changwei Liu ◽  
Shanshan Mao
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Amic Acid ◽  
Core Shell ◽  
Oxidation Reactions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Pure Cu

Based on the combination of an in situ induction and imidization method for improving the interface bonding of an inorganic material and a polymer, copper@polyimide (Cu@PI) core–shell composite particles have been successfully prepared from poly(amic acid) ammonium salts (PAAS) and a Cu complex via a simple solvothermal process. The structures and the morphologies of the samples were characterized by X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy (TEM), respectively. It was found that PAAS formed PI via a thermal imidization and subsequently precipitated in the solvent. Through crystallization induction, it then successfully coated on the surface of the formed Cu particles. Based on thermo gravimetric analyses curves and due to no Cu oxidation reactions taking place in the core coated with high-temperature-resistant PI, the weight increase was determined to be 106.4%, instead of up to 124.0% in samples consisting of pure Cu.

Sign in / Sign up

Export Citation Format

Share Document