Research on Function Aggregate Prepared by Steel Wastewater Sludge

2010 ◽  
Vol 168-170 ◽  
pp. 1625-1630
Author(s):  
Qing Jun Ding ◽  
Xiu Lin Huang ◽  
Hua Sun ◽  
Kun Yang
Keyword(s):  
Heavy Metals ◽  
Optimization Design ◽  
High Strength ◽  
Radiation Shielding ◽  
Wastewater Sludge ◽  
Raw Material ◽  
Linear Attenuation Coefficient ◽  
System A ◽  
Zn Content ◽  
Novel Method

Industrial wastewater sludge contains a certain amount of heavy metals, which will cause environmental pollution. In this paper high Cr, Zn content wastewater sludge from steel plant was used as the main raw material, with Kaolin and other materials as adjustment materials. Through optimization design of raw mix composition and firing system, a kind of function aggregate was got, which had an apparent relative density of about 3.0 g/cm3, a vacuum water absorption between 16%~23%, and a linear attenuation coefficient more than 0.15cm-1. Use XRD and SEM to analyze the existence state of heavy metals in aggregates. The novel method for making function aggregates provides a technical support for resource utilization of steel wastewater sludge, which could be applied in the field of high strength concrete and radiation shielding concrete.

Applications of Bentonite to Soil Decontamination

2018 ◽  
Vol 69 (7) ◽  
pp. 1695-1698
Author(s):  
Marin Rusanescu ◽  
Carmen Otilia Rusanescu ◽  
Gheorghe Voicu ◽  
Mihaela Begea
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Laboratory Experiments ◽  
Experimental Studies ◽  
Heavy Metal Concentration ◽  
Polluted Soil ◽  
Raw Material ◽  
Soil Decontamination ◽  
Metal Retention ◽  
Removal Of Heavy Metals

A calcium bentonite from Orasu Nou deposit (Satu Mare Romania) was used as raw material. We have conducted laboratory experiments to determine the influence of bentonite on the degree of heavy metal retention. It has been observed that the rate of retention increases as the heavy metal concentration decreases. Experimental studies have been carried out on metal retention ( Zn) in bentonite. In this paper, we realized laboratory experiments for determining the influence of metal (Zn) on the growth and development of two types of plants (Pelargonium domesticum and Kalanchoe) and the effect of bentonite on the absorption of pollutants. These flowers were planted in unpolluted soil, in heavy metal polluted soil and in heavy metal polluted soil to which bentonite was added to observe the positive effect of bentonite. It has been noticed that the flowers planted in unpolluted soil and polluted with heavy metals to which bentonite has been added, the flowers have flourished, the leaves are still green and the plants whose soils have been polluted with heavy metals began to dry after 6 days, three weeks have yellowish leaves and flowers have dried. Experiments have demonstrated the essential role of bentonite for the removal of heavy metals polluted soil.

scholarly journals In Silicon Monte Carlo Simulation Trials for Investigation of V2O5 Reinforcement Effect on Ternary Zinc Borate Glasses: Nuclear Radiation Shielding Dynamics

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1158
Author(s):  
Huseyin O. Tekin ◽  
Shams A. M. Issa ◽  
Gokhan Kilic ◽  
Hesham M. H. Zakaly ◽  
Mohamed M. Abuzaid ◽  
...  
Keyword(s):  
Effective Atomic Number ◽  
Mean Free Path ◽  
Radiation Shielding ◽  
Nuclear Radiation ◽  
Zinc Borate ◽  
Linear Attenuation Coefficient ◽  
Buildup Factor ◽  
Glass Composites ◽  
Mcnpx Code ◽  
Negative Effect

In the current study, promising glass composites based on vanadium pentoxide (V2O5)-doped zinc borate (ZnB) were investigated in terms of their nuclear-radiation-shielding dynamics. The mass and linear attenuation coefficient, half-value layer, mean free path, tenth-value layer, effective atomic number, exposure-buildup factor, and energy-absorption-buildup factor were deeply simulated by using MCNPX code, Phy-X PSD code, and WinXcom to study the validation of ZBV1, ZBV2, ZBV3, and ZBV4 based on (100−x)(0.6ZnO-0.4B2O3)(x)(V2O5) (x = 1, 2, 3, 4 mol%) samples against ionizing radiation. The results showed that attenuation competencies of the studied glasses slightly changed while increasing the V2O5 content from 1 mol% to 4 mol%. The domination of ZnO concentration in the composition compared to B2O3 makes ZnO substitution with V2O5 more dominant, leading to a decrease in density. Since density has a significant role in the attenuation of gamma rays, a negative effect was observed. It can be concluded that the aforementioned substitution can negatively affect the shielding competencies of studied glasses.

scholarly journals Development of a novel method for the in-situ dechlorination of immovable iron elements: optimization of Cl− extraction yield through experimental design

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Marco Veneranda ◽  
Nagore Prieto-Taboada ◽  
Jose Antonio Carrero ◽  
Ilaria Costantini ◽  
Aitor Larrañaga ◽  
...  
Keyword(s):  
Experimental Design ◽  
Optimization Design ◽  
Degradation Process ◽  
Extraction Yield ◽  
Alkaline Solutions ◽  
Iron Core ◽  
Total Consumption ◽  
Iron Leaching ◽  
Novel Method

AbstractThe conservation of iron objects exposed to marine aerosol is threatened by the formation of akaganeite, a highly unstable Cl-bearing corrosion phase. As akaganeite formation is responsible of the exfoliation of the rust layer, chlorides trigger a cyclic alteration phenomenon that often ends with the total consumption of the iron core. To prevent this degradation process, movable iron elements (e.g. archaeometallurgical artefacts) are generally immersed in alkaline dechlorination baths. Aiming to transfer this successful method to the treatment of immovable iron objects, we propose the in-situ application of alkaline solutions through the use of highly absorbent wraps. As first step of this novel research line, the present work defines the best desalination solution to be used and optimizes its extraction yield. After literature review, a screening experimental design was performed to understand the single and synergic effects of common additives used for NaOH baths. Once the most effective variables were selected, an optimization design was carried out to determine the optimal conditions to be set during treatment. According to the experimental work here presented, the use of 0.7 M NaOH solutions applied at high temperatures (above 50 °C) is recommended. Indeed, these conditions enhance chloride extraction and iron leaching inhibition, while promoting corrosion stabilization.

scholarly journals Effects of Wastewater Sludge Topdressing on Color, Quality, and Clipping Yield of a Turfgrass Mixture

HortScience ◽  
2011 ◽  
Vol 46 (9) ◽  
pp. 1308-1313 ◽  
Author(s):  
Ugur Bilgili ◽  
F. Olcay Topac-Sagban ◽  
Irfan Surer ◽  
Nejla Caliskan ◽  
Pervin Uzun ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Ammonium Nitrate ◽  
Food Processing ◽  
Fecal Coliform ◽  
Soil Samples ◽  
Wastewater Sludge ◽  
Turf Quality ◽  
Color Quality ◽  
Turf Soils ◽  
Sludge Application

The objectives of the present study were to determine the effects of the rate and timing of the application of sun-dried wastewater sludge from a food processing company's wastewater system on turfgrass growth and quality. The results were compared with those obtained with ammonium nitrate, and changes in the concentration of heavy metals and the presence of fecal coliform in turf soils after sun-dried wastewater sludge application were determined. The rate and the timing of sun-dried wastewater sludge and ammonium nitrate applications affected the turf color, quality, and clipping yield. Monthly fertilization resulted in a more uniform color and turf quality than infrequent spring and fall fertilization. Compared with the background values of base soils, heavy metals did not accumulate in sun-dried wastewater sludge-amended soils over the test period. Fecal coliform was not detected in sludge-amended soil samples, indicating that bacteria regrowth did not occur during the study period.

Fundamental Characterisation of Dredged Marine Sediments from Kuala Perlis Jetty by XRF, XRD and FTIR

2012 ◽  
Vol 620 ◽  
pp. 469-473 ◽  
Author(s):  
Norhashimah Ramli ◽  
Mohammad Hafizuddin Haji Jumali ◽  
Wan Safizah Wan Salim
Keyword(s):  
Heavy Metals ◽  
Marine Sediments ◽  
Xrd Analysis ◽  
Raw Material ◽  
Ftir Analysis ◽  
Huge Amount ◽  
The Us ◽  
Dredged Marine Sediment ◽  
Primary Mineral ◽  
Us Epa

Dredging along Kuala Perlis Jetty results in huge amount of marine sediments which has thrown considerable challenge for disposal. This research was conducted to characterize dredged marine sediment which was collected at Kuala Perlis Jetty as potential raw material for brick production. Three different characterizations were performed namely XRF, XRD and FTIR. XRF analysis showed the presence of SiO2 and Al2O3 as major quantities. Low concentration of heavy metals namely As, Cr, Cu, Pb, Ni and Zn presence in the sediment comply the US EPA guideline for brick production. XRD analysis indicated the presence of quartz as primary mineral while kaolinite and illite also present as secondary and ternary phases. FTIR analysis identified various form of minerals presence in the samples which strongly supported XRD results.

scholarly journals Decentralized Optimization for a Novel Control Structure of HVAC System

2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Shiqiang Wang ◽  
Jianchun Xing ◽  
Ziyan Jiang ◽  
Juelong Li
Keyword(s):  
Control System ◽  
Decentralized Control ◽  
Control Structure ◽  
Optimization Method ◽  
Labor Cost ◽  
Smart Device ◽  
Hvac System ◽  
Decentralized Optimization ◽  
System A ◽  
Novel Method

A decentralized control structure is introduced into the heating, ventilation, and air conditioning (HVAC) system to solve the high maintenance and labor cost problem in actual engineering. Based on this new control system, a decentralized optimization method is presented for sensor fault repair and optimal group control of HVAC equipment. Convergence property of the novel method is theoretically analyzed considering both convex and nonconvex systems with constraints. In this decentralized control system, traditional device is fitted with a control chip such that it becomes a smart device. The smart device can communicate and operate collaboratively with the other devices to accomplish some designated tasks. The effectiveness of the presented method is verified by simulations and hardware tests.

Bioleaching of heavy metals from wastewater sludge by ferrous iron oxidizing bacteria

2016 ◽  
Vol 38 (1) ◽  
pp. 51-55 ◽  
Author(s):  
A. M. Marchenko ◽  
G. N. Pshinko ◽  
V. Ya. Demchenko ◽  
V. V. Goncharuk
Keyword(s):  
Heavy Metals ◽  
Ferrous Iron ◽  
Wastewater Sludge ◽  
Iron Oxidizing Bacteria
Sign in / Sign up

Export Citation Format

Share Document