Experimental Study on Improving the early Strength of Fly Ash Concrete

2010 ◽  
Vol 168-170 ◽  
pp. 1943-1946
Author(s):  
Hui Niu ◽  
Kai Yang ◽  
Ke Bin Zhao ◽  
Huan Zheng Chi
Keyword(s):  
Experimental Study ◽  
Fly Ash ◽  
Concrete Strength ◽  
Activation Mechanism ◽  
Early Age ◽  
Fly Ash Concrete ◽  
Early Strength ◽  
Strength Improvement

This manuscript makes experiments on the macroscopic concrete strength improvement of fly ash activation at early age. At the same time we test the microstructure of fly-ash waste residue concrete cementious materials and calculus, analyzing HPC preliminary mechanism tentatively. The mechanism of improving the early concrete strength by fly ash activation is expatiated, which improves activation mechanism and technology of fly ash.

Quality Control of Fly-Ash Concrete Strength at early Age and Evaluation Application Research

2012 ◽  
Vol 450-451 ◽  
pp. 782-785
Author(s):  
Hui Niu
Keyword(s):  
Quality Control ◽  
Fly Ash ◽  
Concrete Strength ◽  
Early Age ◽  
Application Research ◽  
Fly Ash Concrete ◽  
Improve Accuracy ◽  
Concrete Quality ◽  
Mixing Proportion

This manuscript briefly introduces an engineering example.The method of fly-ash concrete presumption at early age is used in mixing proportion design. we can control concrete quality and improve accuracy of the early evaluating presumption concrete among measures and results.

Experimental Study on Mechanical Property of Concrete Based on Seawater and Sea Sand

2013 ◽  
Vol 641-642 ◽  
pp. 574-577 ◽  
Author(s):  
Ying Tao Li ◽  
Ling Zhou ◽  
Mao Jiang ◽  
Yu Zhang ◽  
Jun Shao
Keyword(s):  
Mechanical Property ◽  
Experimental Study ◽  
Fly Ash ◽  
Raw Materials ◽  
Growth Trend ◽  
Sea Sand ◽  
Significant Strength ◽  
Dry Conditions ◽  
Early Strength ◽  
Better Than

In this paper, the mechanical property experiments of concrete based on the seawater and sea sand have been carried in different raw materials preparation and different conservation environments. The results show that the early strength and late strength of concrete based on seawater and sea sand are better than concrete based on freshwater and sand. There is no significant strength decreased for concrete based on seawater and sea sand under accelerated alternating wet and dry conditions. For concrete based on seawater and sea sand mixed with admixture, the downward trend of late strength is significantly delayed, the late strength of concrete based on the seawater and sea sand mixed with slag gets the most obvious growth trend, while the late strength of seawater and sea sand concrete mixed with fly ash gets the largest increment.

Effect of fine fly ash and calcium hydroxide on air void structure in very-early-strength latex-modified concrete

2015 ◽  
Vol 42 (10) ◽  
pp. 797-807
Author(s):  
Pangil Choi ◽  
Sung Il Jeon ◽  
Kyong-Ku Yun
Keyword(s):  
Fly Ash ◽  
Calcium Hydroxide ◽  
Bridge Decks ◽  
Time Frame ◽  
Early Age ◽  
Freeze Thaw ◽  
Void Structure ◽  
Early Strength ◽  
Air Void ◽  
Air Void Structure

Very-early-strength latex-modified concrete (VES-LMC) was developed for rapid repairs of distresses in concrete bridge decks and pavements, with the emphasis on early-age strength gain so that the repaired bridges and pavements can be opened to traffic within the time frame required in the specifications. However, there are two main concerns in the use of VES-LMC — early-age cracking and poor air void structure. The main objective of this study was to further improve VES-LMC to minimize early-age cracking and improve freeze–thaw durability, which included the use of fine fly ash (FFA) and calcium hydroxide (CH). Laboratory experiments were conducted on VES-LMC materials with cement replaced with FFA as well as CH, and various tests performed. Early-age drying shrinkages of VES-LMC containing both FFA and CH in the amounts evaluated in this study were smaller than that of VES-LMC with no replacements. It is expected that the use of FFA and CH in the range evaluated in this study will reduce the cracking potential of VES-LMC. Overall, the replacement of cement with FFA and CH improved the characteristics of entrained air void system, which will enhance the durability of VES-LMC against freeze–thaw damage. Scanning electron microscope and energy dispersive spectroscopy analysis indicate the primary mechanism of the generation of small sized air voids in concretes containing adequate amount of FFA and CH is the gas formation reaction between citric acid solutions and CH during concrete mixing. It is expected that the inclusion of adequate amounts of FFA and CH in VES-LMC will improve the performance of repaired bridge decks and pavements in terms of reduced cracking and improved freeze-thaw durability.

EXPERIMENTAL STUDY ON COMPRESSIVE YOUNG’S MODULI AND TENSILE YOUNG’S MODULUS OF FLY ASH CONCRETE

2018 ◽  
Vol 5 (2) ◽  
Author(s):  
Yoichi Mimura ◽  
Vanissorn Vimonsatit ◽  
Yuki Watanabe ◽  
Itaru Horiguchi ◽  
Isamu Yoshitake
Keyword(s):  
Fly Ash ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Tangent Modulus ◽  
Early Age ◽  
Secant Modulus ◽  
Tensile Stresses ◽  
Fly Ash Concrete ◽  
Young’S Moduli ◽  
Initial Tangent Modulus

Initial cracks due to volume changes at an early age affect the durability of concrete structures, so numerical simulations are often conducted in order to predict cracks. Such prediction requires some mechanical properties of early age concrete. Tensile Young's modulus is directly dependent on the prediction of tensile stress and is one of the important input data for FEM analysis. However, direct tension test for tensile Young's modulus needs a unique apparatus and specimen, and such test is not suitable for evaluating Young's modulus at early ages of concrete. The present study compared tensile Young's modulus with compressive Young's moduli of Fly ash concrete. Compressive Young's moduli used in this study were secant modulus and initial tangent modulus. In addition, linear modulus taken from a regression line of a compressive stress-strain curve in the range of stresses less than the splitting tensile strength was also evaluated. It is found that the secant modulus, which is generally used as Young's modulus in Japan was clearly smaller than the tensile Young's modulus, which means that, tensile stresses evaluated using a secant modulus might be underestimated. On the other hand, linear modulus and initial tangent modulus were almost equal to the tensile Young's modulus. This result indicates that tensile stresses can be evaluated using Young's modulus obtained from a compression test with general apparatus and specimens.

The Effect of Eggshell Powder as an Accelerator for Blended Cement Concrete

2020 ◽  
Vol 17 (2) ◽  
pp. 1032-1036
Author(s):  
Nur Nadhira Abdul Rasid ◽  
Abdul Rahman Mohd. Sam ◽  
Azman Mohamed ◽  
Nor Hasanah Abdul Shukor Lim ◽  
Zaiton Abdul Majid ◽  
...  
Keyword(s):  
Calcium Oxide ◽  
Palm Oil ◽  
Concrete Strength ◽  
Strength Development ◽  
Early Age ◽  
Palm Oil Fuel Ash ◽  
Fuel Ash ◽  
Early Strength ◽  
Oil Fuel ◽  
Silica Oxide

Blended concrete has later strength development with long maturity strength development. An accelerator is thus needed to enhance the early strength development of concrete. This paper shows the combination of ground palm oil fuel ash and eggshell powder that was designed for later and early strength development, respectively. Two types of eggshell powder were utilised in concrete: uncarbonised eggshell powder and decarbonised eggshell powder. The study was initiated with compression test for concrete curing at age 1, 3, 7, and 28 days followed by rapid evaluation test of setting time to investigate the preliminary performance between materials. The results revealed decarbonised eggshell powder as a high accelerator that can improve the early age of concrete strength development. Meanwhile, despite showing the best performance, uncarbonised eggshell powder is a very low accelerator thus not fit the purpose. In conclusion, the combination of ground palm oil fuel ash (rich with silica oxide) and decarbonised eggshell powder (rich with calcium oxide) provided dual function, where ground palm oil fuel ash and decarbonised eggshell powder took later and early strength development, respectively. The combination between silica oxide and calcium oxide in cementitious materials has potential to be utilised to enhance the early age of a blended concrete strength development.

Study on the Strength of Sea Sand Concrete in Ningbo

2011 ◽  
Vol 250-253 ◽  
pp. 262-265
Author(s):  
Jun Zhe Liu ◽  
Guo Liang Zhang ◽  
Jian Bin Chen ◽  
Zhi Min He
Keyword(s):  
Fly Ash ◽  
Influence Factor ◽  
Concrete Strength ◽  
Chloride Ion ◽  
Strength Development ◽  
Term Strength ◽  
Two Phase ◽  
Sea Sand ◽  
Early Strength

This paper mainly explain and expounded folding compressive strength of the different types of sea sand mortar , fly ash to the sea sand concretes mortar intensity influence as well as the chloride ion content to the sea sand concretes mortar intensity influence. The pulverized fly ash has the postponement function to the sea sand concretes early strength, the chloride ion has the promoter action to the sea sand concretes early strength. 20% pulverized fly ash be good to the sea sand concretes long-term strength development influence, can achieve the goal which enhances the sea sand concretes the long-term strength . The chloride ion is greater to the concretes early strength influence, especially in previous 3 days. Along with the time development, the chloride ion influence weakens, but the pulverized fly ash enlarges to the concretes intensity's influence factor. A two-phase arrived, the final concrete strength values close to each other.

Fly-Ash Concretes of 50% of the Replacement Ratio to Reduce the Cracking in Concrete Structures

2013 ◽  
Vol 405-408 ◽  
pp. 2665-2670 ◽  
Author(s):  
Ming Jie Mao ◽  
Qiu Ning Yang ◽  
Wen Bo Zhang ◽  
Isamu Yoshitake
Keyword(s):  
Fly Ash ◽  
Concrete Structures ◽  
High Volume ◽  
Pozzolanic Reaction ◽  
Strength Development ◽  
Early Age ◽  
Replacement Ratio ◽  
Fly Ash Concrete ◽  
Massive Concrete ◽  
Normal Strength

Fly-ash concrete used in massive concrete structure has superior advantages to reduce hydration heat. On the other hand, the fly-ash concrete has negative property of low strength development at early age because pozzolanic reaction of fly-ash activates at mature age, such as after 28 days. To investigate these characteristics of fly-ash used in concrete, the present study discusses thermal cracking possibility of fly-ash concrete by using FE analysis software. The present study employs prediction formulae proposed by Zhang and Japanese design code in the simulations. The objects in this study are normal strength concrete mixed of fly-ash up to 50% of replacement ratio to cement. The comparative investigations show that temperature effect is more significant than strength development at early age. Based on the analytical study, high volume fly-ash concretes of 30-50% of the replacement ratio can be concluded as effective and useful materials to reduce the cracking possibility in massive concrete structures. Keywords-Fly-ash concrete; Early Age, Prediction Formulae for Strength; Thermal Stress Analysis

Prediction of the Strength Development of Fly Ash Concrete

2010 ◽  
Vol 150-151 ◽  
pp. 1026-1033 ◽  
Author(s):  
Ming Hui Liu ◽  
Yuan Feng Wang
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Concrete Strength ◽  
Strength Development ◽  
Standard Temperature ◽  
Development Models ◽  
Fly Ash Concrete ◽  
Strength Tests ◽  
Maturity Method ◽  
Predicted Model

The effect of fly ash in improving the mechanical properties of concrete is investigated and the existing concrete strength development models are studied. Based on the chemic reactivity properties between fly ash and cement, an appropriate concrete strength model are chosen, and a new model for the fly ash strength factor combing Maturity method is built up and the factors are regressed by existing experimental datum. A total of 24 concretes, including two concretes were produced with two partial fly ash replacement ratios (23.7%, 32.7%). The cubic samples produced from ash fly concrete were demoulded after a day, and cured at standard temperature ( in GB/T 50081-2002) with 100% relative humidity until 28 days, then cured in water. The compressive strength tests were carried out on the cubic specimens at different ages. The compressive strength with time was evaluated by using the new predicted model. It was found that the calculated results by new method are fit the experimental data well.

Research on the Application of Limestone Powder in Concrete Engineering

2012 ◽  
Vol 174-177 ◽  
pp. 341-344
Author(s):  
Shuang Mei Cao
Keyword(s):  
Fly Ash ◽  
Concrete Strength ◽  
Henan Province ◽  
Limestone Powder ◽  
Fly Ash Concrete ◽  
Composition Materials ◽  
Effective Use

This thesis first analyzes the necessity for the application of limestone powder produced in Lime Ridge from Xixia County, Henan Province. It also tests the concrete performance with different composition materials and does research on the influence of limestone powder on concrete strength by adding limestone powder instead of fly ash in fly ash concrete. It then finds out the reasonable volume of limestone powder to meet the concrete’s performance, in order to guarantee the scientific and effective use of limestone powder in concrete engineering.

Sign in / Sign up

Export Citation Format

Share Document