Manufacturing Technique and Property Evaluation of Sound Absorption Composite Planks

2011 ◽  
Vol 239-242 ◽  
pp. 1933-1936
Author(s):  
Jia Horng Lin ◽  
Chia Chang Lin ◽  
Chao Chiung Huang ◽  
Ching Wen Lin ◽  
You Cheng Liao ◽  
...  
Keyword(s):  
Fracture Stress ◽  
Sound Absorption ◽  
Testing Machine ◽  
Polyester Fiber ◽  
Basic Material ◽  
Absorption Test ◽  
Total Thickness ◽  
Absorption Coefficients ◽  
Property Evaluation ◽  
Foam Polyurethane

In this study, the basic material for sound absorption was porous nonwoven made of polyester nonwoven and low-melting polyester fiber. Nonwoven was then attached with foam polyurethane as composite plank for sound absorption and sound isolation. We used two microphone impedance tube for sound absorption test and INSTRON 5566 mechanical testing machine for tensile test. The optimum sound absorption coefficients as 0.67 ± 0.008 was obtained when density of foam polyurethane was 1.0 Kg/㎥ with thickness of 20 mm; Polyester (PET) nonwoven were laminated with 9 layers in a total thickness of 10 mm; and its low-melting polyester fiber was 30 wt%. The composite plank obtained the maximum fracture stress when it contained low-melting-point (low-Tm) PET fiber at 30~40 wt%. The results of this study could be applied in the partitions inside ships, vehicles or buildings.

Manufacturing Process of Sound Absorption Composite Planks

2010 ◽  
Vol 97-101 ◽  
pp. 1801-1804 ◽  
Author(s):  
Jia Horng Lin ◽  
You Cheng Liao ◽  
Chao Chiung Huang ◽  
Chia Chang Lin ◽  
Chin Mei Lin ◽  
...  
Keyword(s):  
Tensile Test ◽  
Fracture Stress ◽  
Sound Absorption ◽  
Testing Machine ◽  
Polyester Fiber ◽  
Basic Material ◽  
Absorption Test ◽  
Absorption Coefficients ◽  
Foam Polyurethane ◽  
Impedance Tubes

In this study, the basic material for sound absorption was porous nonwoven made of polyester nonwoven and low-melting polyester fiber. Nonwoven was then attached with foam polyurethane as composite plank for sound absorption and sound isolation. We used two microphone impedance tubes for sound absorption test and INSTRON 5566 mechanical testing machine for tensile test. The optimum sound absorption coefficients as 0.67 ± 0.008 was obtained when density of foam polyurethane was 1.0 Kg/m3 with thickness of 20 mm; Polyester nonwoven were 9 layers; and low-melting polyester fiber was 30 wt% with thickness of 10 mm. Specimens obtained the maximum fracture stress when it contained low-melting polyester fiber at 30~40 wt%. The results of this study could be applied in the partitions inside ships, vehicles or buildings.

scholarly journals Preparation and Characterization of Gradient Compressed Porous Metal for High-Efficiency and Thin-Thickness Acoustic Absorber

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1413 ◽  
Author(s):  
Xiaocui Yang ◽  
Xinmin Shen ◽  
Panfeng Bai ◽  
Xiaohui He ◽  
Xiaonan Zhang ◽  
...  
Keyword(s):  
Sound Absorption ◽  
High Efficiency ◽  
Structural Parameters ◽  
Porous Metal ◽  
Theoretical Models ◽  
Absorption Efficiency ◽  
Total Thickness ◽  
Porous Metals ◽  
Absorption Coefficients ◽  
Optimal Average

Increasing absorption efficiency and decreasing total thickness of the acoustic absorber is favorable to promote its practical application. Four compressed porous metals with compression ratios of 0%, 30%, 60%, and 90% were prepared to assemble the four-layer gradient compressed porous metals, which aimed to develop the acoustic absorber with high-efficiency and thin thickness. Through deriving structural parameters of thickness, porosity, and static flow resistivity for the compressed porous metals, theoretical models of sound absorption coefficients of the gradient compressed porous metals were constructed through transfer matrix method according to the Johnson–Champoux–Allard model. Sound absorption coefficients of four-layer gradient compressed porous metals with the different permutations were theoretically analyzed and experimentally measured, and the optimal average sound absorption coefficient of 60.33% in 100–6000 Hz was obtained with the total thickness of 11 mm. Sound absorption coefficients of the optimal gradient compressed porous metal were further compared with those of the simple superposed compressed porous metal, which proved that the former could obtain higher absorption efficiency with thinner thickness and fewer materials. These phenomena were explored by morphology characterizations. The developed high-efficiency and thin-thickness acoustic absorber of gradient compressed porous metal can be applied in acoustic environmental detection and industrial noise reduction.

scholarly journals Diffuse Sound Absorptive Properties of Parallel-Arranged Perforated Plates with Extended Tubes and Porous Materials

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1091 ◽  
Author(s):  
Dengke Li ◽  
Daoqing Chang ◽  
Bilong Liu
Keyword(s):  
Boundary Condition ◽  
Porous Material ◽  
Porous Materials ◽  
Sound Absorption ◽  
Azimuthal Angle ◽  
Octave Band ◽  
Frequency Range ◽  
Absorption Coefficients ◽  
Perforated Plates ◽  
Absorption Performance

The diffuse sound absorption was investigated theoretically and experimentally for a periodically arranged sound absorber composed of perforated plates with extended tubes (PPETs) and porous materials. The calculation formulae related to the boundary condition are derived for the periodic absorbers, and then the equations are solved numerically. The influences of the incidence and azimuthal angle, and the period of absorber arrangement are investigated on the sound absorption. The sound-absorption coefficients are tested in a standard reverberation room for a periodic absorber composed of units of three parallel-arranged PPETs and porous material. The measured 1/3-octave band sound-absorption coefficients agree well with the theoretical prediction. Both theoretical and measured results suggest that the periodic PPET absorbers have good sound-absorption performance in the low- to mid-frequency range in diffuse field.

scholarly journals COMPARATIVE ANALYSIS OF SOUND SUPRESSING LIGHTWEIGHT STRUCTURED PANELS AND MODERN NOISE PROTECTION MEANS

Akustika ◽  
2019 ◽  
Vol 32 ◽  
pp. 30-35
Author(s):  
Valery Murzinov ◽  
Pavel Murzinov ◽  
Irina Ivanovna
Keyword(s):  
Comparative Analysis ◽  
Sound Absorption ◽  
Absorption Coefficients ◽  
Acoustic Insulation ◽  
Materials Used ◽  
And Control

This article provides an overview of modern soundproof materials and structures used for acoustic insulation. Presently, we can find plenty of such noise insulation and sound absorption materials. One of the popular means to reduce noise and control sound today is the acoustic panels able to suppress and absorb different sounds. The article also analyses the effectiveness of acoustic and sound protection materials used in the industrial sphere. The comparative analysis of the sound protection and absorption effectiveness is carried out using sound absorption coefficients. It also presents the construction of a sound suppressing lightweight structured panel designed by the authors. The authors noted that these panels have better characteristics in comparison with other modern sound protection materials.

scholarly journals Effects of heat treatment on sound absorption coefficients in nanosilver‐impregnated and normal solid woods

2016 ◽  
Vol 11 (4) ◽  
pp. 365-369 ◽  
Author(s):  
Ayoub Esmailpour ◽  
Hamid Reza Taghiyari ◽  
Habib Zolfaghari
Keyword(s):  
Heat Treatment ◽  
Sound Absorption ◽  
Absorption Coefficients

Sound absorption of a finite flexible micro-perforated panel absorber back by a rigid air cavity filled with a fibrous porous material

2021 ◽  
Vol 263 (3) ◽  
pp. 3625-3632
Author(s):  
Ho Yong Kim ◽  
Yeon June Kang
Keyword(s):  
Energy Dissipation ◽  
Porous Material ◽  
Fibrous Material ◽  
Alternative Energy ◽  
Sound Absorption ◽  
Sound Pressure ◽  
Absorption Coefficients ◽  
Air Cavity ◽  
Acoustic Cavity ◽  
Absorption Performance

Back by a rigid cavity filled with a layer of porous layer, the sound absorption performance of a micro-perforated panel (MPP) can be enhanced in comparison with other resonance based sound absorbers. In this paper, a theoretical model of a finite flexible MPP back by a rigid air cavity filled with a fibrous porous material is developed to predict normal sound absorption coefficients. Displacements of MPP and sound pressure field in fibrous porous material and acoustic cavity are expressed using a series of modal functions, and the sound absorption coefficients of MPP system are obtained. Additionally, comparison of energy dissipation by MPP and fibrous material is performed to identify effects of a fibrous material on the sound absorption of a MPP. As expected, at anti-resonance frequency of an MPP, the fibrous material provide an alternative energy dissipation mechanism.

Sign in / Sign up

Export Citation Format

Share Document