Research on Dissolvant-Based Infrared Yarn Dyeing Process of Polyacrylonitrile Fiber

2011 ◽  
Vol 308-310 ◽  
pp. 436-441
Author(s):  
Zheng Yu Zhang ◽  
Hong Xu ◽  
Chun Ling Zheng
Keyword(s):  
Organic Solvent ◽  
Benzyl Alcohol ◽  
Organic Solvents ◽  
Ph Value ◽  
Polyacrylonitrile Fiber ◽  
Process Conditions ◽  
Cationic Dye ◽  
The Core ◽  
Dyeing Process ◽  
Leveling Agent

Cationic dye is a special dye for polyacrylonitrile, but it is very difficult in dying through the core. In practice, the price of special leveling agent for polyacrylonitrile fiber is high, and uniform staining is poor. By mixing a number of organic solvents in the dye bath, we can improve the structure of fibers and its deep-dyed. In this paper, we use n-propanol, isopropanol and benzyl alcohol as organic solvent, by adjusting the pH value and the appropriate temperature, and with special depth and leveling agent for dyeing soaping fastness contrast, to find economically viable process conditions.

scholarly journals FACTORS INVOLVED IN THE USE OF ORGANIC SOLVENTS AS PRECIPITATING AND DRYING AGENTS OF IMMUNE SERA

1932 ◽  
Vol 16 (2) ◽  
pp. 243-256 ◽  
Author(s):  
Malcolm H. Merrill ◽  
Moyer S. Fleisher
Keyword(s):  
Organic Solvent ◽  
Organic Solvents ◽  
Serum Proteins ◽  
Ph Value ◽  
Critical Concentration ◽  
Antibody Activity ◽  
Maximum Loss ◽  
High Concentrations ◽  
Lower Temperature ◽  
Complete Precipitation

1. In concentrations of 70 to 75 per cent the organic solvents methyl, ethyl, and propyl alcohols, and acetone cause complete precipitation of serum proteins and produce maximum loss in solubility. We have referred to this concentration range as the critical concentration. 2. As the concentration of the solvents is increased from about 75 per cent precipitation continues complete but loss in solubility progressively decreases until at all concentrations above about 87 per cent the precipitates formed at room temperature are completely soluble. 3. The degree of resolubility of the precipitates formed even in these high concentrations of the organic solvent decreases as the temperature is raised and as the duration of exposure is increased. 4. At 5°C. the precipitates formed in all concentrations of these organic solvents are completely resoluble. Also these solvents exert maximum precipitating effect at lower temperature. 5. Maximum precipitating effect by these organic solvents occurs at about pH 6.0 precipitation becoming progressively less as the pH value is altered either way from this point. 6. The more concentrated the serum, the greater the proportion of protein present that will be precipitated by any given concentrations of organic solvent. 7. A method for preparing dry immune sera has been given. Such dried sera have been extracted with a number of organic compounds without loss in solubility or antibody activity.

Research on microwave pad dyeing process for wool fabric

2017 ◽  
Vol 21 (4) ◽  
pp. 263-275 ◽  
Author(s):  
Xue Zhao
Keyword(s):  
Ph Value ◽  
Wool Fabric ◽  
Process Conditions ◽  
Colour Difference ◽  
Average Deviation ◽  
Sodium Bisulphite ◽  
Content Type ◽  
Dyeing Process ◽  
Wool Fabrics ◽  
Microwave Fixation

Purpose This paper aims to study microwave pad dyeing process for wool fabric. Influences of various dyeing process conditions including galactomannan dosage, urea dosage, sodium bisulphite dosage, pH value, microwave irradiation power, treating time and cold batching time before microwave fixation on K/S values were analysed. The colour yield, fixation and levelness were compared between microwave fixation and cold batching fixation. Design/methodology/approach Colour yield (K/S values) was calculated using a Datacolor SF650 colour measuring and matching instrument (10° standard observer, CIE D65 light source Measuring; Datacolor, USA) and was used to determine the depth of the shade of dyed wool fabrics. Levelness of dyeing was evaluated also using the Datacolor SF650 colour measuring and matching instrument by measuring average deviation (S), range (P) of the maximum and the minimum for lightness (L), chroma (C) and hue (h), and balanced colour difference (ΔE) at 20 specified uniform locations on the wool fabrics. The colour difference was calculated as per the equation ΔE=(ΔL2+Δa2+Δb2)1/2 as appearing in the Experimental section. Fixation was determined using a Datacolor SF650 colour measuring and matching instrument by measuring ratio the of K/S for wool fabrics that were rinsed, washed, neutralised and then dried, and wool fabrics that were dried after fixation without washing. The pH of the padding solution was evaluated using a PHSJ-4A PH meter (Datacolor, USA). SEM analysis was done on JEOL JSM-5600LV machine (JEOL Ltd, Japan). Findings This study is based on application of microwave technology in the processing of silk. Originality/value It was found in laboratory experiments that uniform dyeing and deeper colour can be achieved throughout the microwave pad dyeing process for wool by using galactomannan. The novel process could reduce the dyeing time and the energy consumption of the traditional cold pad-batch dyeing process for wool fabric.

Dyeing Process of PSA/MPIA Blended Fiber

2014 ◽  
Vol 716-717 ◽  
pp. 3-6
Author(s):  
Cui Shu Ling
Keyword(s):  
Sodium Chloride ◽  
Ph Value ◽  
Cationic Dye ◽  
Blended Yarn ◽  
Dyeing Process ◽  
Liquor Ratio ◽  
Dyeing Parameters

The dyeing process of Polysulfonamide (PSA)/poly-m-phenylene isophthalamide (MPIA) blended yarn is studied. By choosing suitable dyeing carrier and dyeing parameters, the optimum dyeing condition was determined as follows: cationic dye 2-3%(o.w.f.), carrier acetophenone 40g/L, sodium chloride 15g/L, pH value 4-5, dyeing at 140°C for 60 minutes and the liquor ratio 30:1.

scholarly journals Effects of Organic Solvent on Curing Behavior and Storage Stability for Waterborne Paint Containing Catalyst Encapsulated in Micelles

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 722
Author(s):  
Shuji Yomo
Keyword(s):  
Organic Solvent ◽  
Organic Solvents ◽  
Storage Stability ◽  
Dibutyltin Dilaurate ◽  
Film Properties ◽  
Surfactant Micelles ◽  
Catalytic Function ◽  
Hydrophilic Lipophilic Balance ◽  
Before And After ◽  
And Storage

In this study, a 2-pack isocyanate curing waterborne paint (without organic solvents) encapsulating dibutyltin dilaurate (hereinafter, DBTL) in nonionic surfactant micelles with an hydrophilic–lipophilic balance of 13–14 in advance releases DBTL when the micelles are collapsed at 80 °C or higher, whereby the curing progresses rapidly. On the other hand, the viscosity levels of the paint before and after being left at 40 °C for 1 h are almost the same. Organic solvents are mandatory for waterborne paints to provide paint and film properties, but they might collapse the micelles when they are formulated in the paint. In this study, we investigate whether the abovementioned paint containing organic solvents can develop switching functionality in terms of maintaining the storage stability at 40 °C and expressing a catalytic function at 80 °C to progress the curing. As a result, we find that if the solubility of the organic solvent in water at 20 °C is at least 10 g/100 mL and the boiling point is ≤200 °C, both curing and storage stability can be achieved.

Study on the Enzyme Desizing Process for Cotton Fabric Using Ultrasonication

2011 ◽  
Vol 331 ◽  
pp. 261-264 ◽  
Author(s):  
Qi Ming Zhao ◽  
Shan Yan Zhang
Keyword(s):  
Cotton Fabric ◽  
Ph Value ◽  
Orthogonal Experiment ◽  
Research Result ◽  
Strength Loss ◽  
Cotton Fabrics ◽  
Optimum Process ◽  
Process Conditions ◽  
Fabric Strength ◽  
Enzyme Dosage

The auxiliary devices of ultrasonic treatment was designed and manufactured. The cotton fabric was desized using 2000L desizing enzyme with the conventional enzyme desizing process and ultrasonic enzyme desizing process respectively. Through the orthogonal experiment, the optimum process conditions of conventional enzyme desizing process and ultrasonic enzyme desizing process were determined. For the conventional enzyme desizing process, the optimized desizing conditions of cotton fabrics were: desizing enzyme dosage was 1.5g/l, temperature was 80°C, PH value was 6, and time was 60mins. The optimum process conditions of ultrasonic enzyme desizing process were: desizing enzyme dosage was 1.5g/l, temperature was 50°C, PH value was 6 and time was 45minutes. The research result indicates that, under the same desizing condition, ultrasonication can improve the desizing percentage and whiteness of cotton fabric, but the fabric strength loss increases slightly. And for the same required desizing percentage, the ultrasonic enzyme desizing process saved time and reduced the temperature of experiments compared with traditional enzyme desizing process

scholarly journals Equilibrium modeling of mono and binary sorption of Cu(II) and Zn(II) onto chitosan gel beads

2016 ◽  
Vol 37 (4) ◽  
pp. 485-501 ◽  
Author(s):  
Józef Nastaj ◽  
Małgorzata Tuligłowicz ◽  
Konrad Witkiewicz
Keyword(s):  
Metal Ion ◽  
Ph Value ◽  
Experimental Studies ◽  
Process Conditions ◽  
Optimal Process ◽  
Sorption Data ◽  
Gel Beads ◽  
Two Component ◽  
Equilibrium Data ◽  
Chitosan Gel

Abstract The objective of the work are in-depth experimental studies of Cu(II) and Zn(II) ion removal on chitosan gel beads from both one- and two-component water solutions at the temperature of 303 K. The optimal process conditions such as: pH value, dose of sorbent and contact time were determined. Based on the optimal process conditions, equilibrium and kinetic studies were carried out. The maximum sorption capacities equaled: 191.25 mg/g and 142.88 mg/g for Cu(II) and Zn(II) ions respectively, when the sorbent dose was 10 g/L and the pH of a solution was 5.0 for both heavy metal ions. One-component sorption equilibrium data were successfully presented for six of the most useful three-parameter equilibrium models: Langmuir-Freundlich, Redlich-Peterson, Sips, Koble-Corrigan, Hill and Toth. Extended forms of Langmuir-Freundlich, Koble-Corrigan and Sips models were also well fitted to the two-component equilibrium data obtained for different ratios of concentrations of Cu(II) and Zn(II) ions (1:1, 1:2, 2:1). Experimental sorption data were described by two kinetic models of the pseudo-first and pseudo-second order. Furthermore, an attempt to explain the mechanisms of the divalent metal ion sorption process on chitosan gel beads was undertaken.

Effects of organic solvents on immobilized enzyme catalyses. Chymotrypsin immobilized on porous glass

1981 ◽  
Vol 59 (19) ◽  
pp. 2921-2925 ◽  
Author(s):  
J. Bryan Jones ◽  
Diana H. Pliura
Keyword(s):  
Organic Solvent ◽  
Organic Solvents ◽  
Porous Glass ◽  
Immobilized Enzyme ◽  
Butyl Alcohol ◽  
Solvent Concentration ◽  
Marked Contrast ◽  
Practical Applications ◽  
Tert Butyl Alcohol ◽  
Esterolytic Activity

The esterolytic activity of native chymotrypsin (CT) immobilized on ionically neutral porous glass beads has been studied in the presence of up to 20% (v/v) of the organic solvents methanol, ethanol, 2-propanol, tert-butyl alcohol, dioxane, and DMSO. In marked contrast to the variations observed with native CT, inhibition of CT immobilized on glass (CT–glass) was independent of the nature of the organic solvent. The overall activity, as indicated by kc(app)/km(app), decreased by 35–50% as the concentration of all solvents surveyed was increased up to 20%. In general, high organic solvent concentration accelerated the rate of protein release from the insoluble catalyst. For practical applications in aqueous organic solvents CT–glass conjugates are inferior to those of the enzyme attached to Sephadex.

scholarly journals Diverse resourcing of Nerium indicum leaves for bio-utilization

2020 ◽  
Vol 24 (3 Part A) ◽  
pp. 1785-1793
Author(s):  
Dongli Ma ◽  
Yuanyuan Chen ◽  
Yong Lai ◽  
Zanpei Zhang ◽  
Ximei Li ◽  
...  
Keyword(s):  
Organic Solvent ◽  
Organic Solvents ◽  
Raw Materials ◽  
Chemical Constituents ◽  
Food Additives ◽  
Ornamental Plant ◽  
Bioactive Ingredients ◽  
Ft Ir ◽  
Medicinal Properties ◽  
Alcohol Benzene

Nerium indicum is an ornamental plant that is widely distributed in tropical and subtropical regions wordwide. It has toxic and medicinal properties which is closely related to the bioactive ingredients contained in Nerium indicum. In our research, the leaves of Nerium indicum was used as raw materials to study the chemical constituents and their effects. The chemical constituents of the leaves were analyzed by FT-IR and GC-MS with alcohol, benzene and acetone as organic solvents. A total of 73 compounds were obtained by acetone organic solvent, 25 compounds were extracted from benzene and 146 compounds were obtained from alcohol. Rich bioactive and bioenergy components were found in all three kinds of extract, suggesting that Nerium indicum leaves are of great significance for the diverse resourcing of bio-utilization including biomedicine, bioenergy, aroma, food additives.

Sign in / Sign up

Export Citation Format

Share Document