The Effects of Fiber Architecture and Fiber Surface Treatment on Physical Properties of Woven Sisal Fiber/Epoxy Composites

2011 ◽  
Vol 410 ◽  
pp. 39-42
Author(s):  
Sawitri Srisuwan ◽  
Pranee Chumsamrong
Keyword(s):  
Surface Treatment ◽  
Flexural Modulus ◽  
Fiber Surface ◽  
Epoxy Composites ◽  
Sisal Fiber ◽  
Fiber Architecture ◽  
Untreated Fiber ◽  
Fiber Surface Treatment ◽  
Sisal Fibers ◽  
Twill Weave

The aim of this work was to investigate the effects of fiber architecture and fiber surface treatment on flexural and impact properties of woven sisal fiber/epoxy composites. The woven sisal fibers with three different weave types including plain weave (P-weave), harness satin weave (S-weave) and right hand twill weave (R-weave) were used. For untreated fiber/epoxy composites, the fiber contents in the composite were 0, 5, 10 and 15% by weight (%wt). The untreated S-weave sisal fiber/epoxy composites showed the best overall properties and the composites with 15% fiber loading showed the highest properties. When compared to pure epoxy, flexural strength, flexural modulus and impact strength of the composite with 15% wt fiber increased by 4.5%, 60.6% and 150% respectively. Therefore, the composite of 15% wt silane treated S-weave and epoxy was prepared in order to study the effect of fiber surface treatment. The results showed that the composite containing 15% wt silane treated fiber possessed nearly the same properties with the untreated fiber/epoxy composite.

Evaluation of Interfacial Properties of Sisal Fiber Reinforced High Density Polyethylene (HDPE) Composites

2007 ◽  
Vol 334-335 ◽  
pp. 625-628 ◽  
Author(s):  
Yan Li ◽  
Hong Xia Deng ◽  
Ye Hong Yu
Keyword(s):  
Natural Fiber ◽  
Fiber Surface ◽  
Interfacial Properties ◽  
Sisal Fiber ◽  
Fiber Reinforced ◽  
Statistical Parameters ◽  
Pull Out ◽  
Bonding Properties ◽  
Fiber Surface Treatment ◽  
Sisal Fibers

Statistical methods were employed to study the structure characteristics of sisal fibers. Two types of fiber surface treatment methods, namely chemical bonding and oxidization were used to improve the interfacial bonding properties of sisal fiber reinforced HDPE (sisal/HDPE) composites. Interfacial properties were evaluated by single fiber pull out test. The interfacial shear strength (IFSS) was calculated and analyzed by the statistical parameters. The results were compared with those obtained by traditional ways. A novel method which could more accurately evaluate the interfacial properties between natural fiber and polymeric matrices was proposed.

Effects of Weave Type and Fiber Content on Physical Properties of Sisal Fiber/Epoxy Composites

2010 ◽  
Vol 123-125 ◽  
pp. 1139-1142 ◽  
Author(s):  
Sawitri Srisuwan ◽  
Pranee Chumsamrong
Keyword(s):  
Impact Strength ◽  
Physical Properties ◽  
Epoxy Resin ◽  
Flexural Modulus ◽  
Fiber Content ◽  
Epoxy Composites ◽  
Sisal Fiber ◽  
Pure Epoxy ◽  
Sisal Fibers ◽  
The Impact

In this study, the effects of weave type and fiber content on the physical properties of woven sisal fiber/epoxy composites were investigated. Sisal fibers used in this work were obtained from Nakhon Ratchasima, Thailand. Both untreated and alkali-treated fibers were employed. The woven sisal fibers were manufactured by hand weaving process. The fiber content in sisal fiber/epoxy composites were 3 wt.%, 5 wt.% and 10 wt.%. The composites were cured at room temperatures. In order to determine mechanical properties of the composites, flexural and impact tests were applied. Flexural strength and flexural modulus of all composites were higher than those of pure epoxy resin and tended to increase with increasing fiber content. The impact strength of all composites was lower than that of pure epoxy resin. The composites containing 10 wt.% sisal fibers showed the highest impact strength. There was no definite influence of weave type on flexural properties of the composites. At 3 and 5 wt.% fiber, the composites containing plain weave fibers seemed to show a higher impact strength than the composites containing other weave types.

scholarly journals Effect of Wood Fiber Surface Treatment on the Properties of Recycled HDPE/Maple Fiber Composites

2021 ◽  
Vol 5 (7) ◽  
pp. 177
Author(s):  
Roberto C. Vázquez Fletes ◽  
Denis Rodrigue
Keyword(s):  
Surface Treatment ◽  
Low Cost ◽  
Flexural Modulus ◽  
Wood Fiber ◽  
Impact Resistance ◽  
Tensile Modulus ◽  
Fiber Surface ◽  
Treated Fiber ◽  
Fiber Surface Treatment ◽  
The Impact

This work reports on the production and characterization of recycled high density polyethylene (R-HDPE) composites reinforced with maple fibers. The composites were produced by a simple dry-blending technique followed by compression molding. Furthermore, a fiber surface treatment was performed using a coupling agent (maleated polyethylene, MAPE) in solution. FTIR, TGA/DTG, and density analyses were performed to confirm any changes in the functional groups on the fiber surface, which was confirmed by SEM-EDS. As expected, the composites based on treated fiber (TC) showed improved properties compared to composites based on untreated fiber (UC). In particular, MAPE was shown to substantially improve the polymer–fiber interface quality, thus leading to better mechanical properties in terms of tensile modulus (23%), flexural modulus (54%), tensile strength (26%), and flexural strength (46%) as compared to the neat matrix. The impact resistance also increased by up to 87% for TC as compared to UC. In addition, the maximum fiber content to produce good parts increased from 15 to 75 wt% when treated fiber was used. These composites can be seen as sustainable materials and possible alternatives for the development of low-cost building/construction/furniture applications.

scholarly journals Influence of Laying Angles in Reinforcement of Epoxy in Sisal Plain Woven Structures

2021 ◽  
Author(s):  
Palani GOPINATH ◽  
Paramasivam SURESH
Keyword(s):  
Flexural Strength ◽  
Flexural Modulus ◽  
Strain Engineering ◽  
New Method ◽  
Epoxy Composites ◽  
Sisal Fiber ◽  
Engineering System ◽  
Data Sets ◽  
Displacement Force ◽  
Sisal Fibers

This study is about microstructure characterization and understanding the flexural properties of plain-woven sisal fabric reinforced epoxy composites. Vibrational Spectroscopy (FTIR) and SEM (Scanning Electron Microscopy) were used to describe the plain-woven sisal fabric and sisal fiber reinforced epoxy composites. Two laying angles were incorporated into the epoxy resin (10 percent), i.e. [0°/90°] and [0°/45°]. To isolate the effect of epoxy type and whether woven sisal fibers were used, an analytical design that is based on [0°/90°] and [0°/45°] orientation used the results. Epoxy treated with woven sisal fibers had a higher tensile (0.62 GPa) and flexural modulus (0.69 GPa) with tensile (17 MPa) and flexural strength (14 MPa) while being applied to a surface that is sloped at 0°/45° and which generates a displacement force of approximately 12 mm and strain 15.8 %. While conventional Weibull failure theory has long been widely used to explain the failure of brittle bulk materials, this new equation integrates that theory with the lay angle effect on flexural strength in plain sisal to calculate flexural strength reinforcement in epoxy. This new method can be applied to any fiber reinforcement, regardless of the type, and in terms of the failure of that reinforcement, which is governed by linear elastic fracture mechanics, and agreement between experimental data sets is excellent. According to our expectations, this theoretical study is going to provide a new method for the advanced strain engineering system to be built using reinforced fibers.

Effect of Fiber Surface Treatment on Mechanical Properties of Polylactic Acid/Empty Fruit Bunch Fiber Biocomposites

2014 ◽  
Vol 875-877 ◽  
pp. 171-176
Author(s):  
Senawi Rosman ◽  
Mohd Alauddin Sakinah ◽  
Mohd Salleh Ruzitah ◽  
Mohammad Shueb. Iqbal
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Surface Treatment ◽  
Sodium Hydroxide ◽  
Polylactic Acid ◽  
Flexural Modulus ◽  
Fiber Surface ◽  
Silane Treatment ◽  
Empty Fruit Bunch ◽  
Fiber Surface Treatment

Renewable resourced green biocomposites are currently receiving much attention due to their environmental advantages. Therefore, the aim of this research is study the effect of fiber surface treatment on the mechanical properties of polylactic acid (PLA) biocomposite in order to produce a green biocomposite. Experiments were conducted by surface treatment of empty fruit bunch fiber using two methods, sodium hydroxide and silane. Both treated and untreated fibers were then melt compounded with PLA and mechanical properties of the biocomposite was studied. The results showed that silane treatment improved the reinforced biocomposite mechanical properties such as tensile strength by 33% and flexural modulus by 44% compared with untreated fiber reinforced biocomposites. This is due to the silane functional groups that act as a bridge between the PLA and fiber.

Sign in / Sign up

Export Citation Format

Share Document