The Anti-Seismic Numerical Simulation for a Multi-Storey Frame with Bamboo Engineering Materials

2012 ◽  
Vol 450-451 ◽  
pp. 1284-1287 ◽  
Author(s):  
Yan Li ◽  
Wen Yang Dong
Keyword(s):  
Numerical Simulation ◽  
Construction Industry ◽  
Failure Modes ◽  
Lateral Pressure ◽  
Elastic Recovery ◽  
Frame Structure ◽  
Transverse Deformation ◽  
Load Beam ◽  
Engineering Materials ◽  
Wood Columns

Bamboo has many good features, is an ideal material for the construction industry. The numerical simulation of multi-layer seismic frame structure of bamboo by hand shows that, for re-bamboo wood columns, typical of the two failure modes for the transverse deformation is too large can not continue to load and top of the fibers in the lateral pressure exploded; bamboo column can be restored in the unloaded more than 80% of deformation, has excellent elastic recovery; bamboo can withstand the load beam is actually controlled by the stiffness, not strength.

Numerical Simulation of Ring-Shape Rock Failure under Compressive Loading

2011 ◽  
Vol 378-379 ◽  
pp. 15-18
Author(s):  
Yong Bin Zhang ◽  
Zheng Zhao Liang ◽  
Shi Bin Tang ◽  
Jing Hui Jia
Keyword(s):  
Numerical Simulation ◽  
Fracture Process ◽  
Failure Modes ◽  
Failure Process ◽  
Compressive Loading ◽  
Orientation Angle ◽  
Crack Orientation ◽  
Ring Specimen ◽  
Ring Shape ◽  
Good Agreement

In this paper, a ring shaped numerical specimen is used to studying the failure process in brittle materials. The ring specimen is subjected to a compressive diametral load and contains two angled central cracks. Numerical modeling in this study is performed. It is shown that the obtained numerical results are in a very good agreement with the experiments. Effect of the crack orientation angle on the failure modes and loading-displace responses is discussed. In the range of 0°~40°, the fracture paths are curvilinear forms starting from the tip of pre-existing cracks and grow towards the loading points. For the crack orientation angle 90°, vertical fractures will split the specimen and the horizontal cracks do not influence the fracture process.

Experimental investigation of seismic performance of a novel isostatic frame-cladding system

2022 ◽  
pp. 136943322110572
Author(s):  
Xun Chong ◽  
Pu Huo ◽  
Linlin Xie ◽  
Qing Jiang ◽  
Linbing Hou ◽  
...  
Keyword(s):  
Seismic Performance ◽  
Damage Evolution ◽  
Failure Modes ◽  
Static Load ◽  
Precast Concrete ◽  
Frame Structure ◽  
Deformation Capacity ◽  
Load Bearing Capacity ◽  
Cladding Panels ◽  
Energy Dissipation Capacity

A new connection measure between the precast concrete (PC) cladding panel and PC frame structure is proposed to realize a new kind of isostatic frame-cladding system. Three full-scale PC wall-frame substructures were tested under the quasi-static load. These substructures included a bare wall-frame specimen, a specimen with a cladding panel that has no opening, and a specimen with a cladding panel that has an opening in it. The damage evolution, failure mode, load-bearing capacity, deformation capacity, and energy dissipation capacity of three specimens were compared. The results indicated that the motions of the cladding panels and the main structures were uncoupled through the relative clearance of the bottom connections, and three specimens exhibited approximately identical failure modes and seismic performance. Thus, the reliability of this new isostatic system was validated.

scholarly journals Prefabricated Urban Underground Utility Tunnels: A Case Study on Mechanical Behaviour with Strain Monitoring and Numerical Simulation

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Yonggang Xiao ◽  
Jubing Zhang ◽  
Jie Cao ◽  
Changhong Li
Keyword(s):  
Numerical Simulation ◽  
Working Conditions ◽  
Failure Modes ◽  
Mechanical Performance ◽  
Low Cost ◽  
Side Wall ◽  
Operating Conditions ◽  
Land Occupation ◽  
Depth Analysis ◽  
Simulation Results

The prefabricated urban utility tunnels (UUTs) have many advantages such as short construction period, low cost, high quality, and small land occupation. However, there is still a lack of in-depth analysis of the mechanical performance of the prefabricated urban utility tunnel (UUT) structure with bolted connections under different working conditions. In this paper, the force performance of a prefabricated UUT in Tongzhou District, Beijing, was studied under different working conditions using two methods: field monitoring and numerical simulation. The multichannel strain monitor was used for monitoring, and the internal wall concrete and bolt strain change data under the two conditions of installation and backfill were obtained. Combined with the construction process of the UUTs, a three-dimensional numerical model was established by COMSOL, where the build-in bolt assembly was used to simulate the longitudinal connection of the tunnel. The simulation results were compared with the measured data to verify the rationality of the computational model. The simulation results showed that the concrete and bolts on the inner wall of the tunnel work well under the two conditions of installation and backfilling; The deformation of the top plate of the prefabricated tunnel was approximately parabolic, with the largest vertical displacement (0.37 mm) in the middle and the most sensitive to the vertical load in the central part of the roof. The central portion of the side wall had the largest displacement (0.17 mm) in the inner concave. The tensile stress of bolt 3 increased the most (30.75 MPa) but was still much smaller than the yield strength of the bolt. The concrete and bolts of the UUT were found to work well through force analysis under operating conditions. In conclusion, analysis of structural forces and deformation failure modes will help design engineers understand the basic mechanisms and select the appropriate UUT structure.

scholarly journals Numerical simulation of complex tubular joints of Beijing New Airport Terminal C type column

2019 ◽  
Vol 138 ◽  
pp. 01001
Author(s):  
A Zhang ◽  
G Shangguan ◽  
Yanxia Zhang ◽  
Dinan Shao
Keyword(s):  
Numerical Simulation ◽  
Bearing Capacity ◽  
Failure Modes ◽  
Mechanical Performance ◽  
Simulation Analysis ◽  
Economic Benefits ◽  
Tubular Joints ◽  
Airport Terminal ◽  
Stiffening Ribs ◽  
Final Optimization

The numerical simulation analysis of the two groups of fullscale complex tubular joints of the Beijing New Airport Terminal C type steel column under space static loading tests has been conducted by adopting software ABAQUS. The results obtained from the numerical simulation analysis consistent with those from the tests which enriched the research findings. Based on the research, mechanical performance of the joints has been carried out, the failure modes and ultimate bearing capacity of the joints with no stiffening ribs, three stiffening ribs and five stiffening ribs has been obtained. The numerical simulation results showed that, the bearing capacity of the joints without stiffening ribs were relatively low, the plastic failure of the main pipe was the major form of the destruction and the safety performance were too poor to meet the actual needs of the project. The bearing capacity of the joints significantly improved with the stiffening ribs set inside and the destruction changed to the connection of the main tubular and the branch, which means that the stress of the joints has been obviously improved by the setting of the stiffening ribs and was able to meet the needs of Beijing New Airport Terminal C type column. Through the comparative analysis of the stiffening ribs setting, it can be found that the bearing capacity of the joints were similar between the three and five stiffening ribs, considering the construction difficulty and economic benefits, three stiffening ribs has been selected as the final optimization result.

Integrity Assessment of Subsea Pipeline Dent / Buckle Using ILI Data

2019 ◽  
Author(s):  
Gurumurthy Kagita ◽  
Gudimella G. S. Achary ◽  
Mahesh B. Addala ◽  
Balaji Srinivasan ◽  
Penchala S. K. Pottem ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Failure Modes ◽  
Structural Integrity ◽  
Mechanical Damage ◽  
Metal Loss ◽  
Stress Concentrations ◽  
Subsea Pipeline ◽  
Integrity Assessment ◽  
Finite Element Software

Abstract Mechanical damage in subsea pipelines in the form of local dents / buckles due to excessive bending deformation may severely threaten their structural integrity. A dent / buckle has two significant effects on the pipeline integrity. Notably, residual stresses are set up as result of the plastic deformation and stress concentrations are created due to change in pipe geometry caused by the denting / buckling process. To assess the criticality of a dent / buckle, which often can be associated with strain induced flaws in the highly deformed metal, integrity assessment is required. The objective of this paper is to evaluate the severity of dent / buckle in a 48” subsea pipeline and to make the rerate, repair or replacement decision. This paper presents a Level 3 integrity assessment of a subsea pipeline dent / buckle with metal loss, reported in in-line inspection (ILI), in accordance with Fitness-For-Service Standard API 579-1/ASME FFS-1. In this paper, the deformation process that caused the damage (i.e. dent / buckle) with metal loss is numerically simulated using ILI data in order to determine the magnitude of permanent plastic strain developed and to evaluate the protection against potential failure modes. For numerical simulation, elastic-plastic finite element analyses (FEA) are performed considering the material as well as geometric non-linearity using general purpose finite element software ABAQUS/CAE 2017. Based on the numerical simulation results, the integrity assessment of dented / buckled subsea pipeline segment with metal loss has been performed to assess the fitness-for-service at the operating loads.

scholarly journals Experimental Study on the Seismic Performance of a Partition Damped Wall-Filled Frame Structure

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Shuainan Zhai ◽  
Zuyin Zou ◽  
Zhanyuan Zhu ◽  
Zixing Zhang ◽  
Wei Liang ◽  
...  
Keyword(s):  
Failure Modes ◽  
Lateral Displacement ◽  
Steel Frame ◽  
Frame Structure ◽  
Comparison Analysis ◽  
Significant Damage ◽  
Loading Tests ◽  
Energy Dissipation Capacity ◽  
Mechanical Performances ◽  
Cyclic Loading Tests

In the past, earthquakes have caused significant damage to traditional masonry filler wall frame structures. To solve this problem, a new design scheme, the partition damping filler wall, is proposed in this paper to reduce the interaction between the filler wall and the frame structure. Low cyclic loading tests are carried out on the traditional and the new masonry filler wall frames. Besides, one full-scale-angled span layer frame without a filler wall is produced for comparison analysis. The mechanical performances of the different frames are studied, including the characteristics of the deformation failure modes, hysteretic curves, skeleton curves, rigidity degeneration, energy dissipation capacity, and the lateral displacement of the frame columns. The research results show that the partition damping filler wall can significantly decrease the diagonal bracing effect of the filler wall on the steel frame. Meanwhile, the setting of the low-strength mortar between the filler wall and steel frame and the arrangement of the damping layer can improve the stress distribution and delay the crack development of the wall. Furthermore, the stiffness degradation rate of the partition damping filler wall is obviously slower than that of the traditional masonry filler wall frame structure. In this paper, the partition damped wall-filled frame structure shows outstanding ductility and deformation capacity.

scholarly journals Rapid Retrofit of Reinforced Concrete Frames after Progressive Collapse to Increase Sustainability

2019 ◽  
Vol 11 (15) ◽  
pp. 4195 ◽  
Author(s):  
Li ◽  
Shan ◽  
Zhang ◽  
Li
Keyword(s):  
Reinforced Concrete ◽  
Failure Modes ◽  
Design Method ◽  
Numerical Models ◽  
Progressive Collapse ◽  
Frame Structure ◽  
Rc Frame ◽  
Concrete Frames ◽  
Before And After ◽  
Test Frame

A structural progressive collapse is usually a local failure, in which the damage is concentrated at beams that bridge the removal column and the column itself. In many cases, retrofitting the damaged structure is more economical and more sustainable than reconstructing the entire structure. A progressive collapse test of a 1/3 scale, four-bay by two-story reinforced concrete (RC) frame was conducted, after which the structure was retrofitted with carbon fiber reinforced polymer (CFRP) wraps and retested. The center column in the first story was removed and the frame was pushed down quasistatically under displacement control to investigate the progressive collapse performances of the retrofitted RC frame. The test results were represented systematically at different areas in terms of the resistance forces, crack developments, and local and global failure modes. Numerical models were built to verify the test frame before and after the retrofitting. A design method was proposed to retrofit an RC frame using CFRP wraps after a progressive collapse. The test frame was redesigned to improve the retrofitting and used as an example to demonstrate the rationality of the proposed retrofit design method. The results indicated that the proposed retrofitting technology rapidly restored the frame structure to its original capacity before the progressive collapse occurred, whilst consistently satisfying the priorities of being economical and sustainable.

The Numerical Simulation Analysis of Irregular Frame Structure Dynamic Characteristics

2013 ◽  
Vol 739 ◽  
pp. 373-375
Author(s):  
Fang Zhang
Keyword(s):  
Numerical Simulation ◽  
Dynamic Characteristics ◽  
Simulation Analysis ◽  
Structure Design ◽  
Frame Structure ◽  
Ansys Software ◽  
Mass Percentage ◽  
Structure Dynamic ◽  
Characteristics Analysis ◽  
Dynamic Characteristics Analysis

A bump of irregular frame structure as an example, the use of ANSYS software, the structure dynamic characteristics analysis, given the cycle ratio and modal participation mass percentage, as the bump of irregular frame structure design reference.

Sign in / Sign up

Export Citation Format

Share Document