Novel Organic-Inorganic Hybrid Nanoparticles as Non-Viral Gene Vector

2008 ◽  
Vol 47-50 ◽  
pp. 1319-1322
Author(s):  
Yang Zhao ◽  
Pei Yin ◽  
Zu Yong Wang ◽  
Lei Ren ◽  
Qi Qing Zhang
Keyword(s):  
Gene Therapy ◽  
Encapsulation Efficiency ◽  
Sol Gel ◽  
Hybrid Nanoparticles ◽  
Viral Gene ◽  
Gene Vector ◽  
Inorganic Hybrid ◽  
Sol Gel Process ◽  
Gene Vectors

Novel hybrid biomaterial of gelatin-siloxane nanoparticles (GS NPs), with positive surface potential and lower cytotoxicity, was synthesized through a 2-step sol-gel process. The pDNA-GS NPs complex was formulated with high encapsulation efficiency, and exhibited and efficient transfection in vitro. We thus envision that the GS NPs material could serve as non-viral gene vectors for gene therapy.

UV Curable Organic-Inorganic Hybrid Materials

2000 ◽  
Vol 628 ◽  
Author(s):  
Guang-Way Jang ◽  
Ren-Jye Wu ◽  
Yuung-Ching Sheen ◽  
Ya-Hui Lin ◽  
Chi-Jung Chang
Keyword(s):  
Hybrid Materials ◽  
Colloidal Silica ◽  
Sol Gel ◽  
Solution Ph ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Degradation Temperature ◽  
Sol Gel Process ◽  
The Stability ◽  
Thermal Degradation Temperature

This work successfully prepared an UV curable organic-inorganic hybrid material consisting of organic modified colloidal silica. Applications of UV curable organic-inorganic hybrid materials include abrasion resistant coatings, photo-patternable thin films and waveguides. Colloidal silica containing reactive functional groups were also prepared by reacting organic silane and tetraethyl orthosilicate (TEOS) using sol-gel process. In addition, the efficiency of grafting organic moiety onto silica nanoparticles was investigated by applying TGA and FTIR techniques. Experimental results indicated a strong interdependence between surface modification efficiency and solution pH. Acrylate-SiO2 hybrid formation could result in a shifting of thermal degradation temperature of organic component from about 200°C to near 400°C. In addition, the stability of organic modified colloidal silica in UV curable formula and the physical properties of resulting coatings were discussed. Furthermore, the morphology of organic modified colloidal silica was investigated by performing TEM and SEM studies‥

Synthesis and Intermolecularly Mediated Assembly of Organic Pigment in Hybrid Coating Films

1998 ◽  
Vol 519 ◽  
Author(s):  
Y. Yan ◽  
Z. Duan ◽  
D.-G. Chen ◽  
S. Ray Chaudhuri
Keyword(s):  
Sol Gel ◽  
Hybrid Coating ◽  
Hypsochromic Shift ◽  
Hybrid Films ◽  
Coating Films ◽  
Organic Pigment ◽  
Inorganic Hybrid ◽  
Matrix Interactions ◽  
Sol Gel Process

AbstractThe insoluble, strongly hydrogen bonded organic pigment of 3,6-bis-(4-chlorphenyl)-l,4- diketopyrrolo [3,4-c] pyrrole was transiently blocked by adding carbamate groups, and consequently incorporated into organic-inorganic hybrid matrices by a sol-gel process. The homo- (pigment-pigment) and hetero-intermolecular (pigment-matrix) interactions were found to control both the assembly and dispersion of pigment molecules in the hybrid coating films. A weaker interaction between matrices and pigment molecules results in aggregation of the carbamate pigment in the methyl-silicate films. A stronger interaction forms a homogenous dispersion and coloration of the phenyl-silicate films. The as-prepared methyl- and phenylsilicate films doped with the organic pigment were distinguished by a morphology change and a blue (hypsochromic) shift in absorption from 550 to 460 nm. Thermal treatment can remove the carbamate groups and in-situ form the organic pigment in the hybrid films.

Hybrid Nanocomposites Based on Metal Oxides and Polysiloxanes with Controlled Morphology

2007 ◽  
Vol 1007 ◽  
Author(s):  
Sorin Ivanovici ◽  
Christoph Rill ◽  
Claudia Feldgitscher ◽  
Guido Kickelbick
Keyword(s):  
Metal Oxides ◽  
Sol Gel ◽  
Hybrid Nanocomposites ◽  
Hybrid Nanoparticles ◽  
Spectroscopic Methods ◽  
Metal Alkoxides ◽  
Transmission Electron ◽  
Sol Gel Process ◽  
Ft Ir ◽  
Controlled Morphology

ABSTRACTHybrid materials based on polysiloxanes and metal oxides (SiO2, TiO2, ZrO2) were prepared by hydrosilation of allyl acetoacetate (AAA) modified metal alkoxides (M(OR)4; M = Ti, Zr; R = ethyl, isopropyl) or vinyl triethoxysilane with poly(dimethylsiloxane-co-hydrosiloxane) (PDMS-co-PMHS). The obtained compounds acted as single-source precursors in the sol-gel process. Various spectroscopic methods showed the complete functionalization of the polysiloxane chains with the complexes. When alcohols were used as solvents in the sol-gel process, hybrid nanoparticles were obtained, as observed by dynamic light scattering (DLS) measurements, transmission electron microscopy (TEM), and spectroscopic methods such as NMR and FT-IR.

Synthesis of Photosensitive Organic-Inorganic Hybrid Polymers via Anhydrous Sol-Gel Process for Integrated Optics

2003 ◽  
Vol 780 ◽  
Author(s):  
Xinshi Luo ◽  
Congji Zha ◽  
Barry Luther-Davies
Keyword(s):  
Low Cost ◽  
Sol Gel ◽  
Optical Loss ◽  
Hybrid Polymer ◽  
Optical Losses ◽  
Hybrid Polymers ◽  
Inorganic Hybrid ◽  
Wide Range ◽  
Integrated Optical ◽  
Sol Gel Process

AbstractPhotosensitive organic-inorganic hybrid polymers were synthesised for integrated optical and optoelectronic devices by a non-hydrous sol-gel process of hydrolysis/condensation of 3-methacryloxypropyltrimethoxysilane (MPS), diphenyldimethoxysilane (DPhDMS), and zirconium isopropoxide (TPZ) with boric acid under anhydrous conditions. The methacryl groups of MPS are UVpolymerizable, which are suitable for low cost fabrication of waveguides with a “UV write/develop” process. The incorporation of DPhDMS and TPZ was found useful in reducing the optical loss and in enhancing the thermostability of the polymer. The refractive index of the hybrid polymer is tuneable from 1.4950 to 1.5360 by variation of the ratio among MPS, DPhDMS and TPZ. Optical characterisation showed that the material has low optical losses at the telecommunications windows (0.16 dB/cm at 1310 nm and 0.4 dB/cm at 1550nm). The hybrid polymer also showed a low birefringence (1.2×10-4), a large thermo-optic (TO) coefficient (-2.77 ×10-4), and an outstanding linearity of dn/dT in a wide range of temperature (from 25 °C to 200 °C). Waveguides forming ability for the hybrid polymer with UV imprinting was also demonstrated.

scholarly journals Design of Highly Adhesive and Water-Resistant UV/Heat Dual-Curable Epoxy–Acrylate Composite for Narrow Bezel Display Based on Reactive Organic–Inorganic Hybrid Nanoparticles

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2178
Author(s):  
Jun Hyup Lee
Keyword(s):  
Adhesion Strength ◽  
Sol Gel ◽  
Hybrid Nanoparticles ◽  
Epoxy Acrylate ◽  
Inorganic Hybrid ◽  
Low Viscosity ◽  
Information Displays ◽  
Heat Curing ◽  
High Adhesion ◽  
Acrylate Resin

To attain the narrow bezel characteristic of information displays, functional sealing composite materials should possess high adhesion strength and water barrier performance due to their narrow line widths. In this study, highly adhesive UV/heat dual-curable epoxy–acrylate composites with outstanding water-resistant performance have been proposed using photoreactive organic–inorganic hybrid nanoparticles that can react with an acrylate resin, creating a crosslinked nanoparticle network within the sealing composite. The hybrid nanoparticles consisted of reactive methacrylate groups as a shell and an inorganic core of silica or aluminum oxide, and were facilely synthesized through sol–gel reaction and chemisorption process. The curing characteristics, adhesive strength, and moisture permeability of the proposed sealing composite have been compared to those of a conventional epoxy–acrylate composite containing inorganic silica particles. The composites including hybrid nanoparticles exhibited high UV and heat curing ratios owing to the numerous methacrylate groups on the nanoparticle surface and high compatibility with organic resins. Moreover, the proposed sealing composite showed high adhesion strength and extremely low water permeability due to the creation of densely photocrosslinked network with matrix resins. In addition, the sealing composite exhibited excellent narrow dispensing width as well as relatively low viscosity, suggesting the potential application in narrow bezel display.

Apatite Formation on PDMS-Modified SiO2-CaO-P2O5 Hybrids Prepared with Different P2O5 Content by Sol-Gel Method

2004 ◽  
Vol 449-452 ◽  
pp. 1121-1124 ◽  
Author(s):  
Do Won Seo ◽  
J.G. Kim ◽  
Yun Hae Kim ◽  
Chin Myung Whang
Keyword(s):  
Sol Gel ◽  
Calcium Nitrate ◽  
Apatite Formation ◽  
Calcium Nitrate Tetrahydrate ◽  
X Ray Diffraction ◽  
Phosphate Ions ◽  
P2o5 Content ◽  
Sol Gel Process ◽  
Nitrate Tetrahydrate

Bioactive ORMOSILS (organically modified silicate), PDMS-CaO-SiO2-P2O5 with five different P2O5 content (0, 0.01, 0.03, 0.06, 0.09 mol%) have successfully been synthesized by sol-gel process. The hybrids have been prepared with polydimethylsiloxane (PDMS), tetraethoxysilane (TEOS), calcium nitrate tetrahydrate [Ca(NO3)2 4H2O] and triethyl phosphate (TEP) as starting materials and subsequently soaked into the simulated body fluid (SBF) for different period of time and the bioactivity of hybrids was determined by examining the apatite formation on the surface of the specimen by FT-IR, Thin-Film X-ray Diffraction, and Scanning Electron Microscopy (SEM). All of the prepared samples with different P2O5 content showed in vitro bioactivity. It was observed that the increase in P2O5 content up to 0.03 mole % increases the apatite formation compared to P2O5- free hybrids. However, further increase in P2O5 concentration slows down the formation of the apatite layer most probably due to the decrease of pH of SBF by dissolution of a large amount of phosphate ions.

Polymer-inorganic hybrid nanoparticles of various morphologies via polymerization-induced self assembly and sol–gel chemistry

2016 ◽  
Vol 7 (43) ◽  
pp. 6575-6585 ◽  
Author(s):  
Guo Hui Teo ◽  
Rhiannon P. Kuchel ◽  
Per B. Zetterlund ◽  
Stuart C. Thickett
Keyword(s):  
Self Assembly ◽  
Sol Gel ◽  
Hybrid Nanoparticles ◽  
Inorganic Hybrid ◽  
Silica Hybrid

The preparation of polymer-silica hybrid nanoparticles of various morphologies is reported.

Sign in / Sign up

Export Citation Format

Share Document