Environmental Risk and Recoverable Potential Evaluation of Heavy Metals in the Sludge from the Industrial Wastewater in China

2012 ◽  
Vol 508 ◽  
pp. 196-199 ◽  
Author(s):  
Jian Feng Bai ◽  
Cheng Long Zhang ◽  
Jing Wei Wang ◽  
Jin Qiu Xu ◽  
Yuan Zhou ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Industrial Wastewater ◽  
Low Cost ◽  
Industrial Effluent ◽  
Inorganic Elements ◽  
Toxic Heavy Metals ◽  
High Concentration ◽  
Metal Production ◽  
Potential Evaluation ◽  
Steel Industries

During the treatment of wastewater from metal production and processing industries, a huge volume of sludge is generated. Sludge from the industrial effluent is usually abandoned or used in agriculture as fertilizer due to the presence of phosphorus, potassium and other inorganic elements, or landfilled. In our work, metals concentration in the sludge from different industries of multi-area, China, was determined and the recoverable potential was assessed. It indicated that the sludge from electroplating, PCB, leather treatment, metal smelter and stainless steel industries was restricted its use as a fertilizer because that the sludge had too high concentration of toxic heavy metals. Meanwhile, it was seen that Ag, Cu, Co, Ni, Pb, Zn contents in the sludge from some industries had exceeded the minimum standards of industrial smelting and had the value recycled. It is imperative and beneficial to find a low-cost, environmentally friendly recycling technology to recover the metals in sludge from industrial wastewater.

scholarly journals Bioremoval of Different Heavy Metals in Industrial Effluent by the Resistant Fungal Strain Aspergillus niger

2021 ◽  
Vol 20 (4) ◽  
Author(s):  
K. J. Naveen Kumar ◽  
J. Prakash
Keyword(s):  
Heavy Metals ◽  
Aspergillus Niger ◽  
Metal Binding ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Industrial Effluent ◽  
Toxic Metal ◽  
Differential Pulse ◽  
Toxic Heavy Metals

Developing countries are increasingly concerned with pollution due to toxic heavy metals in the environment. Unlike most organic pollutants which can be destroyed, toxic metal ions released into the environment often persist indefinitely circulating and eventually accumulating throughout the food chain thus posing a serious threat to mankind. The use of biological materials for heavy metal removal or recovery has gained importance in recent years due to their good performance and low cost. Among the various sources, both live and inactivated biomass of organisms exhibits interesting metal binding capacities. Their complex cell walls contain high content of functional groups like amino, amide, hydroxyl, carboxyl, and phosphate which have been implicated in metals binding. In the present study, Aspergillus niger was used to analyze the metal uptake from an aqueous solution. The determination of Cu+2, Pb+2, Cd+2, Zn+2, Co-2 and Ni+2 in samples was carried out by differential Pulse Anodic Voltammetry (DPASV) and the Voltammograms. Production of oxalic acid was carried out by submerged fermentation. The organism used in the present study has the ideal properties to sequester toxic metals and grow faster.

Australian Biosolids: Characterization and Determination of Available Copper

2004 ◽  
Vol 1 (2) ◽  
pp. 116 ◽  
Author(s):  
Ian W. Oliver ◽  
Graham Merrington ◽  
Mike J. McLaughlin
Keyword(s):  
Heavy Metals ◽  
Agricultural Land ◽  
Low Cost ◽  
Land Application ◽  
Toxic Heavy Metals ◽  
High Concentration ◽  
Protection Factor ◽  
Metal Concentrations ◽  
Total Metal ◽  
High Concentrations

Environmental Context. Land application of sewage-derived biosolids is both an inexpensive method to dispose of waste and a simple way to increase soil fertility and stability. However, biosolids often contain high concentrations of heavy metals, but not all of the metals are immediately available for uptake by the soil or other organisms. To determine if this toxicologic risk outweighs the benefits, the degree of ecologically available metal, rather than simply the entire metal content, must be known in both the as-disposed and worst conditions scenarios. Application of these principles requires regulatory bodies to amend their guidelines. Abstract. Application of biosolids to agricultural land provides a low-cost disposal option with many potential benefits to soil. However, the practice may result in accumulations of potentially toxic heavy metals, and thus regulations are in place to limit the amount of metals applied to soil in this way. Current Australian regulations are not ideal because they are based on total metal concentrations in soils and biosolids, rather than the fraction that is ecologically available (the fraction accessible by organisms). Therefore more environmentally appropriate regulations, based on the available metal portion, need to be devised. However, before this is possible, more needs to be known about the characteristics of Australian biosolids, including the factors that influence the availability of biosolid metals. Copper is a metal of great concern because of its commonly high concentration in biosolids and because of its relatively high toxicity to certain groups of bacteria and fungi. Therefore an investigation was conducted to characterize the range of properties observed in Australian biosolids, and to determine the fraction of available metals and the factors that influence it (particularly in the case of copper). General properties such as pH, electrical conductivity, organic carbon, and total metal concentrations were measured. Availability of copper was specifically measured using isotopic exchange techniques and a Cu2+ ion-selective electrode. Results showed that total copper concentration and Cu2+ activity could be used to predict available copper. A new system of biosolid land-use regulation that incorporates the available metal fraction and a pH protection factor is proposed.

ASSESSMENT OF HEAVY METAL CONCENTRATION IN COCONUT WATER

1970 ◽  
pp. 07-10
Author(s):  
MdDidarul Islam, Ashiqur Rahaman, Aboni Afrose
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Concentration ◽  
Coconut Water ◽  
Toxic Heavy Metals ◽  
High Concentration ◽  
Toxic Heavy Metal ◽  
Low Concentration ◽  
Wet Ashing ◽  
Aas Method

This study was based on determining concentration of essential and toxic heavy metal in coconut water available at a local Hazaribagh area in Dhaka, Bangladesh. All essential minerals, if present in the drinking water at high concentration or very low concentration, it has negative actions. In this study, fifteen samples and eight heavy metals were analyzed by Atomic Absorption Spectroscopy (AAS) method which was followed by wet ashing digestion method. The concentration obtained in mg/l were in the range of 0.3 to 1.5, 7.77 to 21.2, 0 to 0.71, 0 to 0.9, 0 to 0.2, 0.9 to 17.3, 0.1 to 0.9, 0 to 0.9 and 0 to 0.7 for Fe, Ni, Cu, Cd, Cr, Zn, Pb and Se respectively. From this data it was concluded that any toxic heavy metals like Cd, Cr, Pb and Ni exceed their toxicity level and some essential nutrients were in low concentration in those samples. 

Assessment of micro and macro nutrients in poultry feeds available in Dhaka city, Bangladesh.

2017 ◽  
Vol 1 ◽  
pp. 264
Author(s):  
Md Didarul Islam ◽  
Ashiqur Rahaman ◽  
Fahmida Jannat
Keyword(s):  
Heavy Metals ◽  
Adverse Effect ◽  
The Other ◽  
Nutrient Level ◽  
Dhaka City ◽  
Toxic Heavy Metals ◽  
High Concentration ◽  
Low Concentration ◽  
Feed Formulation ◽  
Macro Nutrients

This study was based on to determine the concentration of macro and micro nutrients as well as toxic and nontoxic heavy metals present in the chicken feed available in Dhaka city of Bangladesh. All macro nutrients, if present in the feed at high concentration have some adverse effect, at the same time if this nutrient present in the feed at low concentration this have some adverse effect too. So that this nutrient level should be maintained at a marginal level. On the other side toxic heavy metals if present in the feed at very low concentration those can contaminate the total environment of the ecosystem. In this study six brand samples (starter, grower, finisher and layer) which was collected from different renowned chicken feed formulation industry in Bangladesh. Those samples were prepared for analysis by wet ashing and then metals were determined by Atomic Absorption Spectroscopy. It was found that 27.7 to 68.4, 57.3 to 121.9, 0.21 to 4.1, 0.32 to 2.1, 0.11 to 1.58, 0.28 to 2.11 and 0.28 to 1.78 for zinc, iron, copper, mercury, cadmium, nickel and cobalt respectively. It was found that essential macro and micro nutrients were present in the feed in low concentration on the other side mercury was present in high concentration in the feed samples.

Removal of high-concentration sulfate ions from industrial wastewater using low-cost modified Jordanian kaolin

2021 ◽  
Vol 231 ◽  
pp. 359-366
Author(s):  
Banan Hudaib ◽  
Ali F. Al-Shawabkeh ◽  
Waid Omar ◽  
Habis Al-Zoubi ◽  
Rund Abu-Zurayk
Keyword(s):  
Industrial Wastewater ◽  
Low Cost ◽  
High Concentration ◽  
Sulfate Ions

scholarly journals Treatment Of Tofu Industry Wastewater Using Bioreactor Anaerobic-Aerobic And Bioball As Media With Variation Of Hidraulic Retention Time

REAKTOR ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 18-25
Author(s):  
Ariani Dwi Astuti ◽  
Dewi Intania Ayu
Keyword(s):  
Wastewater Treatment ◽  
Removal Efficiency ◽  
Retention Time ◽  
Hydraulic Retention Time ◽  
Negative Impact ◽  
Low Cost ◽  
Industrial Effluent ◽  
Organic Loading Rate ◽  
High Concentration ◽  
Small Industries

Tofu which is made by grinding soy bean, generates huge amount of wastewater and thus considered as one of the most polluted food-industrial effluent owing to its high values of organic contents. The small industries of tofu preparation process release the wastewater directly into the water body without being treated first. Prior to discharge this wastewater into the waterbody, the wastewater must be treated to reduce the possibility of negative impact and the contamination of the waterbody. For these small industries, the best alternative of wastewater treatment is one which has the following criteria: easy in operation, low cost operation, low volumes of sludge produced, and can be used in high concentration wastewater. In this research, bioreactor anaerobic-aerobic with media bioball is used. The highest removal efficiency of COD took place in anaerobic zones. Bioreactors were operated with the variations of retention time at 24 hours, 18 hours, and 12 hours. The COD removal efficiency for Hydraulic Retention Time (HRT) of 24 hours, 18 hours and 12 hours were found 90.3% (organic loading rate is 15.1 kg COD/m3.day), 84.4% and 76.3% respectively. The experiment showed that the longer of the hydraulic retention time (HRT), the higher the removal efficiency could be achieved. These occurred because a longer HRT will extend the contact time between wastewater and microorganisms attached. Therefore, microorganisms have a longer time to degrade organic matter in wastewater. Although the removal efficiency in these three-HRT was found high, the effluent of the reactor was still above the effluent standard based on regulation of Ministry of Environmental Permen LH No. 5/2014. Kinetics using Eckenfelder Equation results R2 equal to 0.9991, n equal to 0.293 and K equivalent to 7.3577 mg/L. Keywords: tofu wastewater, anaerobe, aerobe, bioball, wastewater, treatment, attached growth

scholarly journals Characterization of heavy metal in soils as affected by long-term irrigation with industrial wastewater

2018 ◽  
Vol 9 (1) ◽  
pp. 47-56 ◽  
Author(s):  
Bushra Haroon ◽  
An Ping ◽  
Arshid Pervez ◽  
Faridullah ◽  
Muhammad Irshad
Keyword(s):  
Heavy Metals ◽  
Industrial Wastewater ◽  
Industrial Effluent ◽  
Contamination Level ◽  
Ph Values ◽  
Exchangeable Fraction ◽  
Irrigated Soils ◽  
Exchangeable Form

AbstractInvestigation of heavy metals (HM) fractions in soils irrigated with wastewater (WW) would ascertain their bioavailability and contamination level in soils. This study investigated HM fractions in soils after long-term WW irrigation. WW irrigation profoundly affected HM fractions in soil. The ranges of HM concentrations in soils irrigated with WW were apparently wide. All fractions were significantly higher in the fields irrigated with industrial WW than rain-fed fields. HM concentrations varied in the soils as Pb > Cu > Ni > Zn > Fe > Cd > Mn after WW irrigation. In rainfed fields, HM concentrations differed in soils as Fe > Zn > Mn > Pb > Cd > Cu > Ni. The HM fractions were dominant in the residual form followed by oxides bound and carbonate associated fractions in WW-irrigated soils. Lower contents of HM in the soil were obtained in the exchangeable fraction. WW irrigation resulted in the transformation of HM into different fractions as residual > oxide associated > carbonate associated > organically bound > exchangeable form. Repeated WW irrigation increased pH values of the soils. The higher EC of soil indicated an accumulation of salts in the soils due to WW irrigation. Mitigation of HM contamination in Hattar industrial effluent is required before irrigation.

scholarly journals Applicability of Moringa oleifera Lam. pie as an adsorbent for removal of heavy metals from waters

2013 ◽  
Vol 17 (1) ◽  
pp. 94-99 ◽  
Author(s):  
Affonso C. Gonçalves Junior ◽  
Ana P. Meneghel ◽  
Fernanda Rubio ◽  
Leonardo Strey ◽  
Douglas C. Dragunski ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Moringa Oleifera ◽  
Low Cost ◽  
Previous Treatment ◽  
Toxic Heavy Metals ◽  
Removal Of Heavy Metals ◽  
Alternative Material ◽  
Cadmium Lead ◽  
Optimized Conditions ◽  
Moringa Oleifera Lam

This study evaluated the efficacy of moringa seeds (Moringa oleifera Lam.) as an adsorbent material for removing toxic heavy metals such as cadmium, lead, and chromium from contaminated solutions. The effect of the adsorbent mass was investigated at two pH conditions (5.0 and 7.0). The optimized conditions were 0.300 g of adsorbent at pH 5.0, used for the isotherms construction, and linearized according to Langmuir and Freundlich models. Results showed that cadmium adsorption was similar in both the models used. For lead, the Freundlich model had the best adjustment and chromium was better adjusted by the Langmuir model. It was concluded that the adsorbent was effective in the remediation of solutions containing cadmium, lead and chromium, thus, its use as sustainable alternative material is feasible, since it has low cost, does not need a previous treatment and it is a byproduct.

Sorption of Copper and Zinc from Aqueous Solutions by Microwave Incinerated Sugarcane Bagasse Ash (MISCBA)

2016 ◽  
Vol 835 ◽  
pp. 378-385 ◽  
Author(s):  
Ibrahim Umar Salihi ◽  
Shamsul Rahman Mohamed Kutty ◽  
Mohamed Hasnain Isa ◽  
Usman Aminu Umar ◽  
Emmanuel Olisa
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Correlation Coefficient ◽  
Sugarcane Bagasse ◽  
Contact Time ◽  
Industrial Wastewater ◽  
Low Cost ◽  
Isotherm Model ◽  
Copper And Zinc ◽  
Sugarcane Bagasse Ash

Industrial wastewater containing toxic pollutants such as heavy metals tends to contaminate the environment once it is release without proper treatment. Heavy metals are toxic to both human and other living organisms. It is necessary to treat industrial wastewater polluted with heavy metals prior to its discharge into the receiving environment. In this study, low cost adsorbent was generated from sugarcane bagasse through incineration. The prepared adsorbent “microwave incinerated sugarcane bagasse ash” (MISCBA) was used in removing copper and zinc from aqueous solution. Parameters of importance such as pH, contact time and adsorbent dosages are studied to investigate their effects on the adsorption of copper and zinc. Maximum adsorption was observed at pH 6.0, contact time of 180 minutes and adsorbent dosage of 10 g/L. Zinc removal follows Langmuir isotherm model with correlation coefficient of 0.9291. Copper adsorption follows both Langmuir and Freundlich isotherm model with correlation coefficient of 0.9181 and 0.9742, respectively. Removal capacities of 38.4 mg/g and 20.4 mg/g were obtained for copper and zinc, respectively. Application of MISCBA as low - cost adsorbent have shown significant outcome in removal of copper and zinc from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document