Under Axial Load Finite Element Analysis of Characteristics of Circular Steel Tube Compile Short Column Filled with Steel Reinforced Concrete

2012 ◽  
Vol 588-589 ◽  
pp. 212-216
Author(s):  
Rui Jing ◽  
Yong Sheng Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Steel Tube ◽  
Element Analysis ◽  
Steel Reinforced Concrete ◽  
Short Column ◽  
Circular Steel Tube ◽  
Core Concrete

With the help of large general finite element analysis software ANSYS, under different parameters, this paper will have a finite element analysis of bearing capacity on circular steel tube compile short column filled with steel reinforced concrete(STCSRC).In the paper,it uses separate models to calculate and analyze.Considering the nonlinear constitutive relation of steel and concrete and determining the type of unit,it is shown that stress distribution and load-displacement curve of specimen under the effect of different parameters.According to the curve and data,analysis results of bearing capacity of specimen have been shown that bearing capacity of STCSRC will increase with concrete strength increasing and it also will increase with steel rate increasing under axial load.Because of core concrete working together with steel tube and angle steel,it can significantly improve the bearing capacity of composite columns, slow down and inhibit shearing inclined cracks occur in the core concrete and develop,and improve the ductility of columns.

Finite Element Analysis on Circular Steel Tube Composite Column Filled with Steel Reinforced Concrete

2012 ◽  
Vol 166-169 ◽  
pp. 318-321
Author(s):  
Ya Feng Xu ◽  
Xu Yang ◽  
Xin Wang ◽  
Shou Yan Bai
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Axial Compression ◽  
Steel Tube ◽  
Element Analysis ◽  
Steel Reinforced Concrete ◽  
Axial Compression Ratio ◽  
Circular Steel Tube ◽  
Deformation Ability

The article analysis the seismic behaviors of circular steel tube composite column filled with steel reinforced concrete by the large finite element analysis software ABAQUS, adopted the load-displacement method and aimed at studying the mechanical properties of circular steel tube composite columns filled with steel reinforced concrete under horizontal low-cyclic loading, considering the degree of ductility, capacity of energy dissipation by the steel ratio and axial compression ratio. Under different axial compression ratios and steel ratios, the hysteresis curves and skeleton curves are carried out. Along with the increase of steel ratio, the deformation ability and ultimate bearing capacity are raised, but with the increase of axial compression ratio, the deformation ability becomes worse.

Finite Element Analysis of Axially Loaded RPC Filled Circular Steel Tube Columns

2013 ◽  
Vol 815 ◽  
pp. 256-261 ◽  
Author(s):  
Zhan Hui Li ◽  
Zhi Gang Yan ◽  
Jun Yang ◽  
Hua Luo
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bearing Capacity ◽  
Axial Compression ◽  
Concrete Strength ◽  
Steel Tube ◽  
Element Analysis ◽  
Circular Steel Tube ◽  
Reactive Powder ◽  
Core Concrete

Further research on constitutive model of RPC (Reactive Powder Concrete) restrained by steel tube under axial compression is analyzed based on the research on concrete-filled steel tube and RPC-filled steel tube at home and abroad. Finite element analysis on RPC-filled steel tube stub columns under axial compression is conducted with ABAQUS to analyze the confinement index, core concrete strength and contact property on ultimate bearing capacity of RPC restrained by steel tube. As the confinement index and the core concrete strength increasing, the bearing capacity of RPC restrained by steel tube increases. The model with frictionless contact form has greater bearing capacity, but the ductility decreases.

Axial Bearing Capacity of Steel Reinforced Concrete Short Column with Double Circular Steel Tubes

2013 ◽  
Vol 721 ◽  
pp. 720-725
Author(s):  
Juan Wang ◽  
Jun Hai Zhao ◽  
Sai Wu ◽  
Nan Li
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Relevant Literature ◽  
Steel Tube ◽  
Test Results ◽  
Steel Tubes ◽  
Element Analysis ◽  
Steel Reinforced Concrete ◽  
Short Column ◽  
Good Agreement

Based on the twin shear unified strength theory, analyzing the condition of load for the steel tube and the core-concrete under tri-axial compression, the formula of axial bearing capacity of steel reinforced concrete short column with double circular steel tubes was established and the influencing factors on it were discussed. By the comparison between the results calculated by the formula and the test results, it shows good agreement. Meanwhile, applying the formula to an engineering example, good agreement can be found in the comparison between the calculation in this paper and finite element analysis result in relevant literature. The conclusions can provide a reference for the engineering design.

Nonlinear Finite Element Analysis on the Abnormal Exterior Joint of Steel Reinforced Concrete

2013 ◽  
Vol 351-352 ◽  
pp. 869-874
Author(s):  
Ke Jia Yang ◽  
Jia Ning Zhu ◽  
Xiao Wen Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Nonlinear Finite Element Analysis ◽  
Nonlinear Finite Element ◽  
Loading Capacity ◽  
Reinforced Concrete Column ◽  
Element Analysis ◽  
Skeleton Curve ◽  
Steel Reinforced Concrete

Nonlinear finite element analysis of abnormal exterior joints consist of Steel Reinforced Concrete column and Reinforced Concrete beam was performed using ABAQUS computation program, the joints failure mode and the skeleton curve were calculated. Comparison with experimental results to prove the reliability of finite element analysis. Then, the paper analyzed different parameters which affect the joints loading capacity, the results indicate that to a certain extent, the eccentricity of the upper and lower column sections and steel ratio both have important effects on the stiffness and ultimate loading capacity of the joints; with the increment of the ratio of axial compression, the joints ductility will be reduced.

scholarly journals Shear Bearing Capacity of Framework Joints of Steel-Reinforced Concrete-Filled Circular Steel Tube

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Yongjun Lin ◽  
Kaiqi Liu ◽  
Tianxu Xiao ◽  
Chang Zhou
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Plastic Material ◽  
Element Model ◽  
Steel Tube ◽  
Shear Capacity ◽  
Steel Reinforced Concrete ◽  
Shear Mechanism ◽  
Circular Steel Tube ◽  
Shear Bearing Capacity

In this paper, in order to investigate the shear mechanism and shear capacity of framework joints of steel-reinforced concrete-filled circular steel tube (SRCFCST), a numerical finite element model reflecting the mechanical behavior of framework joints of SRCFCST column-reinforced concrete beam is established through simulating concrete by the damage plastic constitutive model and simulating steel by the ideal elastic-plastic material, and its effectiveness is verified by experimental data. On account of uniform distribution of circular steel reinforced around the section and without definite flange and web, the shear mechanism of the framework joints of SRCFCST is analyzed on the basis of equivalent circular steel tube (CST) to the rectangular steel tube. The method for calculating the superposed shear bearing capacities of the joint core area is proposed, which is composed of four parts, i.e., concrete inside tube, concrete outside tube, hooping and steel-reinforced web; and the corresponding formulas for calculating shear bearing capacity are established. The comparative analysis of joints’ shear bearing capacity indicates that the results of numerical simulation and shear bearing capacity formulas coincide well with the experimental values, which can provide reference for the nonlinear analysis and engineering design of similar joints.

Non-Linear Numerical Simulation of Core Steel Reinforced Concrete Columns Based on ABAQUS Software

2014 ◽  
Vol 651-653 ◽  
pp. 1197-1200
Author(s):  
Kai Wen Li ◽  
Zhi Yang Li ◽  
Yun Zou
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Mechanical Behavior ◽  
Concrete Columns ◽  
Finite Element Models ◽  
Element Analysis ◽  
Steel Reinforced Concrete ◽  
Test Process ◽  
Abaqus Software

Finite element analysis could be used as a supplementary means to investigate mechanical behavior. ABAQUS software is conducted to analyze steel reinforced concrete (SRC) columns. Firstly, in order to validate the rationality of the analytical model, finite element models of test specimens are established to simulate the test process. By comparing the analytical results with experimental ones, it is found that the results from finite element analysis coincide well with that from test. So ABAQUS software could be used as a supplementary means to simulate SRC column mechanical behavior . Further the ductility and ultimate capacity of SRC columns are studied with the changes of steel bone ratio and the axial compressive ratio.

Finite Element Analysis of Recycled Concrete Filled Steel Tube in Bending State

2014 ◽  
Vol 578-579 ◽  
pp. 269-273
Author(s):  
Bing Li ◽  
Shuang Meng ◽  
Wei Hao Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bearing Capacity ◽  
Substitution Rate ◽  
Strain Curve ◽  
Steel Tube ◽  
Recycled Concrete ◽  
Element Analysis ◽  
Bending Strain ◽  
Capacity Calculation

The objective of this paper is to provide the references through finite element analysis for steel tube concrete beams bearing capacity settlement. The paper verified the correctness of the constitutive relation of concrete, the correctness and the model through the establishment of the concrete damaged plasticity model with recycled concrete details in the finite element analysis software ABAQUS. Then the stress characteristics of steel pipe concrete beam in bending condition under different substitution rate could be found through model calculation. The result is that the mid span bending - strain curve from simulation agreed to the experimental results, and the model is proved correct. Finally it came to the conclusions. Other things being equal, the recycled concrete filled square tube changed a lot in bending state when the substitution rate grows, but it didn’t occur to the circular one. In the meantime, the writer proposed the conjecture on the bearing capacity calculation of the two types of structure.

Nonlinear Finite Element Analysis of Stiffened T-Shaped Thin-Walled Concrete-Filled Steel Tube Composite Columns

2012 ◽  
Vol 193-194 ◽  
pp. 1461-1464
Author(s):  
Bai Shou Li ◽  
Ai Hua Jin
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bearing Capacity ◽  
Steel Tube ◽  
Ultimate Bearing Capacity ◽  
Element Analysis ◽  
Concrete Filled Steel Tube ◽  
Composite Columns ◽  
Short Columns ◽  
Thin Walled

Based on the characteristics of the special-shaped concrete-filled steel tubes and consideration of material nonlinearity of constitutive relation, stimulation of 6 T-shaped thin-walled ribbed and un-ribbed concrete-filled steel tube short columns is implemented, as well as comparable analysis of stress, strain, displacement and bearing capacity, through the finite element analysis software ANSYS. The result indicates that the rib can effectively improve the ductility, delaying the buckling occurs, which enhances the core concrete confinement effect, so as the stimulated ultimate bearing capacity which is greater than nominal ultimate bearing capacity.

scholarly journals Finite element analysis of reinforced concrete beams with openings in the abdomen and strengthened with steel sleeves based on ANSYS

2020 ◽  
Vol 198 ◽  
pp. 01029
Author(s):  
Yaohui Shen ◽  
Longbin Lin ◽  
Zhengwei Feng
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Circular Hole ◽  
Reinforced Concrete Beam ◽  
Steel Tube ◽  
Reinforced Concrete Beams ◽  
Element Analysis ◽  
Finite Element Software ◽  
Steel Sleeve

The finite element software ANSYS is used to calculate the ultimate bearing capacity of ordinary beam and circular hole beam, and the results are compared with the test values made by predecessors. The value of shear transfer coefficient between cracks of reinforced concrete beam with circular hole in the abdomen in ANSYS finite element simulation is summarized. The coefficient is used to simulate the circular hole beam strengthened by steel sleeve, and it is pointed out that the steel tube is used to reinforce the circular hole beam The effect of tube reinforcement on the bearing capacity of circular hole beam is not obvious.

Sign in / Sign up

Export Citation Format

Share Document