Measurement and Protection of Human Body Electrostatic of Mobile User Terminal

2013 ◽  
Vol 753-755 ◽  
pp. 2170-2174
Author(s):  
Tian Hai Chang ◽  
Meng Yao Fu ◽  
Pei Pei Yin
Keyword(s):  
Human Body ◽  
Electrostatic Discharge ◽  
Measurement Data ◽  
Mobile User ◽  
Protective Measures ◽  
User Terminal ◽  
Environmental Relative Humidity ◽  
Main Factors ◽  
Parameters Measurement ◽  
Discharge Test

This paper, on the basis of the electrostatic discharge test of mobile user terminals and electrostatic parameters measurement of human body, got electrostatic potential of human body in different condition. The results show that the main factors effecting human body electrostatic are environmental relative humidity, humans dressing, human activities and so on. Then error between the experimental measurement data and the theoretical analysis result are analyzed. Finally proposed some protective measures according to the harm of human body electrostatic to mobile user terminal.

The Determination of the Noise Pollution in a Production Hall and the Diseases Produced by It

2018 ◽  
Vol 69 (4) ◽  
pp. 875-880
Author(s):  
Oana Roxana Chivu ◽  
Ovidiu Mederle ◽  
Augustin Semenescu ◽  
Ileana Mates ◽  
Claudiu Babis ◽  
...  
Keyword(s):  
Risk Factor ◽  
Human Body ◽  
Noise Level ◽  
Noise Pollution ◽  
Protective Measures ◽  
Work Program ◽  
Specialized Equipment ◽  
Chemical Products ◽  
Main Activity

The paper describes how to determine the noise in a production hall where there are production machines and equipment. The chosen plant is a production unit where filling of the polyurethane foam tubes is performed. The main activity is the production of professional insulators and wholesale of other products from the same range enumerating the following: wholesale chemical products; production of professional insulators; trade in chemicals and chemical industry. The recommended maximum admissible value for a normal 8h work program is 85 dB (A). The objective is to determine the level of noise in the factory and how it acts as a physical professional risk factor and its effects on the human body. The way in which the proposed objective was achieved was to determine the value of the noise level with the specialized equipment. Following the determinations that will be presented in the following chapters, appropriate protective measures have been taken.

ELECTROSTATIC DISCHARGE EFFECT ON TMR RECORDING HEAD: A FLEX ON SUSPENSION CAPACITANCE APPROACH

2009 ◽  
Vol 23 (17) ◽  
pp. 3586-3590 ◽  
Author(s):  
NUTTACHAI JUTONG ◽  
APIRAT SIRITARATIWAT ◽  
DUANGPORN SOMPONGSE ◽  
PORNCHAI RAKPONGSIRI
Keyword(s):  
Human Body ◽  
Electrostatic Discharge ◽  
Hard Disk Drives ◽  
Electrical Characteristics ◽  
Disk Drives ◽  
Human Body Model ◽  
Recording Head ◽  
Body Model ◽  
Recording Heads ◽  
First Time

Electrostatic discharge (ESD) effects on GMR recording heads have been reported as the major cause of head failure. Since the information density in hard-disk drives has dramatically increased, the GMR head will be no longer in use. The tunneling magnetoresistive (TMR) read heads are initially introduced for a 100 Gbit/in2 density or more. Though the failure mechanism of ESD in GMR recording heads has not been explicitly understood in detail, a study to protect from this effect has to be done. As the TMR head has been commercially started, the ESD effect must be considered. This is the first time that the TMR equivalent circuit has been reported in order to evaluate the ESD effect. A standard human body model (HBM) is discharged across R+ and R- where the capacitances of flex on suspension (FOS) are varied. It is intriguingly found that the electrical characteristics of the TMR head during the discharge period depend on the discharge position. This may be explained in terms of the asymmetry impedance of TMR by using adapted Thevenin's theory. The effect of FOS components on TMR recording heads is also discussed.

scholarly journals Analysis and Risk Assessment of the Working Conditions of a Steam Turbine Operator

2001 ◽  
Vol 14 (5) ◽  
pp. 520-537
Author(s):  
Irina V. Andrunyak ◽  
Keyword(s):  
Risk Assessment ◽  
Hearing Loss ◽  
Steam Turbine ◽  
Working Conditions ◽  
Human Body ◽  
Risk Taking ◽  
Main Factors ◽  
Special Assessment ◽  
The Impact ◽  
Negative Factors

The article analyzes the negative factors of a steam turbine operator of the 5th category using the example of the Krasnoyarsk CHP. The main factors determining the working conditions are reflected. Based on the results of a special assessment of working conditions classes (subclasses) of conditions for a steam turbine operator have been identified. The definitions and the procedure for assessing occupational risk, taking into account injuriesin hazardous areas, have been formulated, on the basis of which a tree of events of the occurrence of accidents has been built. The calculation of risk assessment of working conditions, where the main harmful factor is the impact of noise on the human body and the resulting hearing loss is proposed

scholarly journals Fine dust atmospheric pollution from the objects of infill construction

2019 ◽  
Vol 135 ◽  
pp. 01020
Author(s):  
Svetlana Manzhilevskaya ◽  
Alexei Lihonosov ◽  
Lubov Petrenko
Keyword(s):  
Air Pollution ◽  
Fine Particles ◽  
Residential Buildings ◽  
Measurement Data ◽  
Anthropogenic Sources ◽  
Dynamic State ◽  
Dust Particles ◽  
Construction Site ◽  
Fine Dust ◽  
Protective Measures

Air pollution emissions are released from both natural and anthropogenic sources. During the environment pollution researching and monitoring the special attention should be paid to the construction operations, since during the construction processes many pollutants are released, especially fine dust particles, which are harmful to the health of construction workers and the population living near the construction site. The construction of any object in urban terrain has bad influence not only on the nearby buildings and city infrastructure, but on the existing environment of urban areas. The identification of the important pollution sources that contribute to ambient concentrations of pollutants is essential for developing an effective air quality management plan during building construction. Particular attention should be paid to emissions of fine particles during technological processes of construction with a special degree of dust emission. Control and regulation of the dynamic state of dispersed systems released during technological construction processes using a number of protective measures will reduce emissions of pollutants into the air. The objects of this research were the construction site and residential buildings of a large residential complex «Ekaterininskiy» located in Rostov-on-Don. The obtained measurement data as a result of this type of environmental monitoring showed the level of atmospheric air pollution from the construction industry using the example of the construction of the residential complex “Ekaterininskiy” in Rostov-onDon. After analyzing the situation with dust pollution the protective measures were suggested.

Sign in / Sign up

Export Citation Format

Share Document