Ratcheting Study of Pressurized Straight Z2CND18.12N Austenitic Stainless Steel Pipe under Reversed Bending

2013 ◽  
Vol 798-799 ◽  
pp. 235-238
Author(s):  
Xiao Hui Chen ◽  
Xu Chen
Keyword(s):  
Numerical Simulation ◽  
Reasonable Agreement ◽  
Straight Pipe ◽  
Finite Element Program ◽  
User Subroutine ◽  
Stainless Steel Pipe ◽  
Element Program ◽  
Simulation And Experiment ◽  
Fortran Language ◽  
Combined Hardening

The current paper reports the results of a numerical simulation and experiment of ratcheting behavior of pressurized straight pipe under reversed bending. A nonlinear isotropic/ kinematic (combined) hardening model is implemented into finite element program ANSYS by writing own user subroutine in FORTRAN language. The results of the numerical simulation is compared with experimental data. A reasonable agreement is noticed between the experimental and the numerical results for the ratcheting behavior of the pressurized straight pipe subjected to reversed bending.

Numerical Simulations of Pressurized Elbow under Reversed In-Plane Bending

2013 ◽  
Vol 785-786 ◽  
pp. 16-19 ◽  
Author(s):  
Xiao Hui Chen ◽  
Xu Chen
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Cyclic Loading ◽  
Numerical Simulations ◽  
Prediction Accuracy ◽  
Finite Element Program ◽  
User Subroutine ◽  
Element Program ◽  
Fortran Language ◽  
Plane Bending

The paper compares numerical simulation with experimental results of pressurized elbow piping subjected to reversed in-plane bending in elastoplastic domain. The modified AbdelKarim-Ohno model is implemented into finite element program ANSYS by writing own user subroutine in FORTRAN language. The modified AbdelKarim-Ohno model may improve the prediction accuracy of ratcheting behavior of pressurized elbow under cyclic loading.

Mechanical Property Analysis and Numerical Simulation of Honeycomb Sandwich Structure’s Core

2013 ◽  
Vol 631-632 ◽  
pp. 518-523 ◽  
Author(s):  
Xiang Li ◽  
Min You
Keyword(s):  
Numerical Simulation ◽  
Elastic Constants ◽  
Sandwich Structure ◽  
Optimization Design ◽  
Simulation Analysis ◽  
Finite Element Program ◽  
Honeycomb Sandwich ◽  
Calculation Results ◽  
Element Program ◽  
Typical Satellite

Owing to the lack of a good theory method to obtain the accurate equivalent elastic constants of hexagon honeycomb sandwich structure’s core, the paper analyzed mechanics performance of honeycomb sandwich structure’s core and deduced equivalent elastic constants of hexagon honeycomb sandwich structure’s core considering the wall plate expansion deformation’s effect of hexagonal cell. And also a typical satellite sandwich structure was chose as an application to analyze. The commercial finite element program ANSYS was employed to evaluate the mechanics property of hexagon honeycomb core. Numerical simulation analysis and theoretical calculation results show the formulas of equivalent elastic constants is correct and also research results of the paper provide theory basis for satellite cellular sandwich structure optimization design.

Numerical Simulation on the Surface Subsidence Effect during Shield Tunneling Construction

2011 ◽  
Vol 299-300 ◽  
pp. 110-113
Author(s):  
Hai Xia Sun ◽  
Hai Yu Wu ◽  
Si Li Chen
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Surface Deformation ◽  
Influence Factors ◽  
Surface Subsidence ◽  
Shield Tunnel ◽  
Shield Tunneling ◽  
Finite Element Program ◽  
Element Program ◽  
Numerical Simulation Methods

Against the background of shenyang subway shield tunnel construction, the method of numerical simulation methods are used to analyze the factors of surface subsidence caused by shield construction comprehensively, and the universal finite element program ABAQUS is used to establish mechanical model depended on comprehensive consideration the influence factors of soil warehouses pressure, seepage and groundwater. A dynamic finite element simulation of shield advance process and conclude the surface deformation rule of soil are studied.

First Results of a 3D Pull-Out Model of Steel Anchors in Fired-Clay Bricks

2019 ◽  
Vol 817 ◽  
pp. 514-519 ◽  
Author(s):  
Francesco Finelli ◽  
Angelo Di Tommaso ◽  
Cristina Gentilini
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Numerical Model ◽  
Experimental Results ◽  
Clay Brick ◽  
Finite Element Program ◽  
Clay Bricks ◽  
Pull Out ◽  
First Results ◽  
Element Program

The paper reports the results of a numerical simulation performed to study the experimental pull-out behavior of twisted steel connectors inserted in fired-clay brick units. The experimental results obtained in a previous campaign are used to calibrate a 3D refined numerical model developed by means of the finite element program Abaqus. The numerical model is tuned to accurately reproduce the experimental results in terms of loads and bar displacements.

Numerical Simulation of Polyurethane Pad Punching Process

2014 ◽  
Vol 941-944 ◽  
pp. 1817-1821
Author(s):  
Xiao Xiong Wang ◽  
Jing Liu ◽  
Jing Tao Han ◽  
Qian Liu
Keyword(s):  
Numerical Simulation ◽  
Cross Section ◽  
Shear Failure ◽  
Sheet Thickness ◽  
Control Parameters ◽  
Arbitrary Lagrangian Eulerian ◽  
Adaptive Meshing ◽  
Finite Element Program ◽  
Element Program ◽  
Punching Process

A numerical simulation was conducted to investigate the effect of the punching clearance, the thickness of sheet, and the hardness of polyurethane pad on the process of punching by finite element program ABAQUS which based on shear failure criterion and arbitrary Lagrangian-Eulerian adaptive meshing method. And the collapse height dimension and width dimension tendency of the sheet under different control parameters was analyzed after punching process according to this simulation result. The results show that the collapse height dimension and width dimension decreased with the increase of the polyurethane hardness, it means the cross section quality perspicuously has been increased; the collapse height dimension and width dimension decreased with the increasing of the sheet thickness; while the influence of the punching gap is indistinctive.

Distribution Characteristics and Influence Factors of Soil Arching Ring behind Stabilizing Piles

2015 ◽  
Vol 744-746 ◽  
pp. 474-478
Author(s):  
Yong Jiang Shen ◽  
Ming Yang ◽  
Hai Hao Cui ◽  
Zheng Liang Xiang ◽  
Yao Zhuang Li ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Stress Distribution ◽  
Influence Factors ◽  
Distribution Characteristics ◽  
Soil Arching ◽  
Finite Element Program ◽  
Stabilizing Piles ◽  
Element Program ◽  
Soil Arch

Soil arch plays an important role in the landslides reinforced by stabilizing piles . A method was presented to determine the range of soil arching ring. The method proposed was achieved by finite element program and the stress distribution of soil arch with different landslide thrust was analyzed. The results show that the thickness of soil arching ring is variable. The mid-span section of soil arching ring is the minimum. The arch ring becomes thicker from the mid-span axis to the arch feet. With the increase of landslide thrust, the soil arching ring becomes thicker and thicker. At last ,the monitoring data of a model test is studied and the results are consistent with that of numerical simulation.

Study on Construction of Long Span and Soft Rock Tunnel with Numerical Simulation

2013 ◽  
Vol 438-439 ◽  
pp. 964-967
Author(s):  
Bin Zhu ◽  
Xiao Jing Shi
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Soft Rock ◽  
Tunnel Excavation ◽  
Finite Element Program ◽  
Factors Affecting ◽  
Long Span ◽  
Element Program ◽  
Main Factors ◽  
Rock Tunnel

With characteristics of the long span and soft rock tunnel, this paper analyzes the main factors affecting tunnel stable on the basis of the way of tunnel excavation method. The large finite element program is used in research of a tunnel, with a numerical simulation of two different way, top heading and bench method and double side drift method. From the result of stress field and displacement field of the tunnel , some useful conclusion are obtained, that double side drift method is appropriate for this kind of soft rock tunnel.

Numerical Simulation of Response of Explosion Ground Shock to Buried Gas Pipeline

2013 ◽  
Vol 448-453 ◽  
pp. 3970-3974
Author(s):  
Xiao Fei Jing ◽  
Zhi Yong Cai ◽  
Ke Hui Liu
Keyword(s):  
Numerical Simulation ◽  
Simulation Method ◽  
Dynamical Theory ◽  
Gas Pipeline ◽  
Underground Explosion ◽  
Dynamical Response ◽  
Finite Element Program ◽  
Element Program ◽  
Ground Shock ◽  
Buried Gas Pipeline

In this paper, by using nonlinear dynamical theory and Arbitrary Lagrange Eulerian (ALE) algorithm in LS-DYNA 3D finite element program, a method of numerical simulation is used to study dynamical response of buried gas pipeline underground shock wave of underground explosion. The simulation results shows that it is feasible for the numerical simulation method in this paper to study dynamical response of buried pipelines underground shock waves from explosion. the conclusion in this paper may provide significant reference for the risk evaluation and disaster prevention of buried gas pipeline.

Nonlinear Finite Element Analysis of Crack Tip of Rubber-Like Material

2007 ◽  
Vol 353-358 ◽  
pp. 1013-1016
Author(s):  
Jian Bing Sang ◽  
Su Fang Xing ◽  
Xiao Lei Li ◽  
Jie Zhang
Keyword(s):  
Finite Element ◽  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Elastic Behavior ◽  
Element Analysis ◽  
Finite Element Program ◽  
User Subroutine ◽  
Element Program ◽  
Notch Tip

It has been well known that rubber-like material can undergo large deformation and exhibit large nonlinear elastic behavior. Because of the geometrically nonlinear of rubber like material, it is more difficult to analyze it with finite element near the notch tip. What is more, because there are varieties of the strain energy functions, implementation of these models in a general finite element program to meet the need of industry applications can be time consuming. In order to make use of the constitutive equation of Y.C. Gao in 1997 and analyze the notch tip of rubber-like material, a framework to implement the rubber-like material model is established within the general-purpose finite element program MSC.Marc. It will be very convenient to implement this isotropic hyperelastic model into the program with a user subroutine. This paper starts with the theoretical analysis based on the strain energy function given by Y.C. Gao in 1997. A user subroutine is programmed to implement this strain energy function into the program of MSC.Marc, which offer a convenient method to analyze the stress and strain of rubber-like material with the strain energy function that is needed. Though analysis with MSC.Marc, it is found that the result with finite element is consistent with the analytical result that given by Y.C. Gao in 1997, which testify that analyzing rubber like material with this method is reasonable and convenient.

Numerical Simulation of Masonry Walls Subjected to Blast Loads

2012 ◽  
Vol 461 ◽  
pp. 93-96
Author(s):  
Xiao Jun Yuan ◽  
Li Chen ◽  
Jian Hua Wu ◽  
Jing Xin Tang
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Finite Element ◽  
Numerical Results ◽  
Dynamic Responses ◽  
Masonry Walls ◽  
Blast Loads ◽  
Finite Element Program ◽  
Element Program ◽  
Good Agreement

Much effort has been devoted to studying the blast properties of masonry infilled panels due to recent increasing accidental blast events. In this paper, the blast properties of the masonry infilled walls were analyzed with the finite element program LS-DYNA by the way of distinctive consideration of the bricks and mortar material in contrast to the experimental data. The numerical results have a good agreement with experimental data. The reliability and efficiency of this method in predicting the dynamic responses of masonry walls to blast loads was proven.

Sign in / Sign up

Export Citation Format

Share Document