Analysis on Calcination of Cementitous Powder of Waste Concrete for Raw Cement

2013 ◽  
Vol 831 ◽  
pp. 267-271 ◽  
Author(s):  
Eun Hee Kwon ◽  
Young Jun Lee ◽  
Gyu Hwan Cho ◽  
Cheon Park Dong
Keyword(s):  
Chemical Composition ◽  
Greenhouse Gas ◽  
Raw Material ◽  
Fine Aggregate ◽  
Waste Concrete ◽  
Alternative Material

The purpose of this study is to determine whether cementitous powder of waste concrete which is separated from waste concrete can be used as alternative raw material for limestone. Chemical composition of cementitous powder of waste concrete was actually analyzed and the experiment to measure the recovery of hydration of waste cementitous powder model was performed. As a result, hydration was recovered to the level at which it can be used as alternative raw material for limestone, but less than 10 % can be used due to mix of fine aggregate in less than 150μm which cannot be separated from cementitous powder. Therefore, development of technology to efficiently separate cementitous powder of fine aggregate is required to have the alternative material for limestone and effect for reduction of greenhouse gas.

scholarly journals Chemical Composition of Straw as an Alternative Material to Wood Raw Material in Fibre Isolation

2016 ◽  
Vol 67 (2) ◽  
pp. 119-125 ◽  
Author(s):  
Ivana Plazonić ◽  
Željka Barbarić-Mikočević ◽  
Alan Antonović
Keyword(s):  
Chemical Composition ◽  
Raw Material ◽  
Alternative Material

PEAS AND PRODUCTS OF ITS PROCESSING OF - NONCONVENTIONAL RAW MATERIAL RESOURCES

2020 ◽  
Author(s):  
D.Y. Bolgova ◽  
◽  
N.A. Tarasenko ◽  
Z.S. Mukhametova ◽  
◽  
...  
Keyword(s):  
Chemical Composition ◽  
Human Health ◽  
Food Production ◽  
Food Industry ◽  
Raw Material ◽  
Plant Proteins ◽  
Material Resources ◽  
The Rich

Nutrition is an important factor that affects human health. The use of plant proteins as various additives in food production has now been actively developed. The rich chemical composition of pea grains determines the possibility of application in the food industry. Peas are characterized by good assimilability and degree of digestion.

scholarly journals Sodium Metasilicate Cemented Analogue Material and Its Mechanical Properties

2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
Songlin Yue ◽  
Yanyu Qiu ◽  
Pengxian Fan ◽  
Pin Zhang ◽  
Ning Zhang
Keyword(s):  
Complex Geometry ◽  
Sodium Metasilicate ◽  
Raw Material ◽  
Fine Aggregate ◽  
Regression Equations ◽  
Deformation And Failure ◽  
Orthogonal Experiments ◽  
Low Modulus ◽  
New Type ◽  
The Relationship

Analogue material with appropriate properties is of great importance to the reliability of geomechanical model test, which is one of the mostly used approaches in field of geotechnical research. In this paper, a new type of analogue material is developed, which is composed of coarse aggregate (quartz sand and/or barite sand), fine aggregate (barite powder), and cementitious material (anhydrous sodium silicate). The components of each raw material are the key influencing factors, which significantly affect the physical and mechanical parameters of analogue materials. In order to establish the relationship between parameters and factors, the material properties including density, Young’s modulus, uniaxial compressive strength, and tensile strength were investigated by a series of orthogonal experiments with hundreds of samples. By orthogonal regression analysis, the regression equations of each parameter were obtained based on experimental data, which can predict the properties of the developed analogue materials according to proportions. The experiments and applications indicate that sodium metasilicate cemented analogue material is a type of low-strength and low-modulus material with designable density, which is insensitive to humidity and temperature and satisfies mechanical scaling criteria for weak rock or soft geological materials. Moreover, the developed material can be easily cast into structures with complex geometry shapes and simulate the deformation and failure processes of prototype rocks.

scholarly journals Geochemistry and Mineralogy of Ice-Dammed Lake Sediments of the Lębork Deposit

2021 ◽  
Author(s):  
Radosław Rogoziński ◽  
Alina Maciejewska
Keyword(s):  
Chemical Composition ◽  
Lake Sediments ◽  
Inductively Coupled Plasma ◽  
Mineralogical Composition ◽  
Raw Material ◽  
Element Analysis ◽  
X Ray ◽  
Dominant Component ◽  
Clay Deposits ◽  
Dammed Lake

AbstractVarved clay deposits from ice-dammed lakes are a particularly important and broadly applied raw material used for the production of high-quality ceramics (red bricks, roof tiles, etc.), but the mineralogy and geochemistry of these sediments are not fully understood. The aim of the present study was to determine the chemical and mineralogical composition of ice-dammed lake sediments of the Lębork deposit. Major-element analysis of the compositions of selected samples from the ice-dammed lake clays was performed by X-ray fluorescence (XRF) and trace elements were determined by inductively coupled plasma-mass spectrometry. The mineralogical composition of clay samples was determined by X-ray diffraction (XRD). Analyses of the chemical composition of the ice-dammed lake clays of the Lębork deposit showed that the dominant component was SiO2 with a mean content of 56.13 wt.%; the second most abundant component was Al2O3, with a mean content for the entire deposit of 11.61 wt.%. Analysis by ICP-MS indicated the presence of rare earth elements (REE), e.g. cerium, neodymium, lanthanum, and praseodymium; their mean contents are: 56.9, 27.0, 26.3, and 7.3 ppm, respectively. Mineralogical analysis of the varved clays identified quartz, muscovite, calcite, and clay minerals – illite, kaolinite, and montmorillonite. The material filling the Lębork basin is characterized by small lateral and vertical variability in chemical composition. The results of the present study may be of considerable importance in determining the parent igneous, metamorphic, and sedimentary rocks, the weathering products of which supplied material to the ice-dammed lake, as well as in determining the mechanisms and character of the sedimentation process itself.

Recycling of Waste Concrete and Fly Ash for Recycled Aggregate Concrete: Fundamental Characteristics Evaluation

2009 ◽  
Vol 620-622 ◽  
pp. 255-258 ◽  
Author(s):  
Cheol Woo Park
Keyword(s):  
Fly Ash ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Experimental Program ◽  
Concrete Aggregate ◽  
Fine Aggregate ◽  
Recycled Concrete Aggregate ◽  
Aggregate Concrete ◽  
Waste Concrete

As the amount of waste concrete has been increased and recycling technique advances, this study investigates the applicability of recycled concrete aggregate for concrete structures. In addition fly ash, the industrial by-product, was considered in the concrete mix. Experimental program performed compressive strength and chloride penetration resistance tests with various replacement levels of fine recycled concrete aggregate and fly ash. In most case, the design strength, 40MPa, was obtained. It was known that the replacement of the fine aggregate with fine RCA may have greater influence on the strength development rather than the addition of fly ash. It is recommended that when complete coarse aggregate is replaced with RCA the fine RCA replacement should be less than 60%. The recycled aggregate concrete can achieve sufficient resistance to the chloride ion penetration and the resistance can be more effectively controlled by adding fly ash. It I finally conclude that the recycled concrete aggregate can be successfully used in the construction field and the recycling rate of waste concrete and flay ash should be increased without causing significant engineering problems.

Characteristics of Wear Layered Laston Mix Using Waste Concrete Aggregate

2021 ◽  
Vol 3 (3) ◽  
pp. 459-468
Author(s):  
Yanti ◽  
Rais Rachman ◽  
Alpius
Keyword(s):  
Coarse Aggregate ◽  
Mixture Design ◽  
Concrete Aggregate ◽  
Fine Aggregate ◽  
Waste Concrete ◽  
Characteristic Value ◽  
Marshall Test ◽  
Pavement Material

The research objective focuses on testing the characteristics of the Laston Lapis Aus mixture, the aggregate taken later to be studied is the aggregate of Concrete Waste. The method used in this study included testing the properties of coarse aggregate, fine aggregate and filler, after that the Laston Lapis Aus mixture design was carried out after that the marshall test was carried out while the marshalltest was carried out namely the conventional marshall to get the characteristic value. The results showed that the characteristics of the pavement material in the form of aggregates from Concrete Waste tested the 2018 Bina Marga General Specifications as road layers. Through Marshall testing, the characteristics of the Laston Lapis Aus mixture were abtained with asphalt levels of 5,50%, 6,00%, 6,50%, 7,00%, and 7,50%.

The Research of Iron Containing Wastes Modification Process of Leninabad Rare Metals Plant

2021 ◽  
Vol 410 ◽  
pp. 778-783
Author(s):  
Pavel V. Matyukhin ◽  
Daler I. Mirzoev
Keyword(s):  
Chemical Composition ◽  
Building Materials ◽  
Raw Material ◽  
Filling Material ◽  
Rare Metals ◽  
X Ray ◽  
Modification Process ◽  
Before And After ◽  
The Republic ◽  
Enrichment Process

The paper presents the results of ferriferous wastes modification process research carried on the basis of JCS “Leninobad rare metals Plant” located in the Republic of Tajikistan. The wastes for the study were taken from the western tailing. The article presents the justification of the chosen wastes as a filling material in the development of new radiation protective composite building materials. The data on the initial ferriferous chemical composition of the tailing wastes and the chemical composition of the material that passed the enrichment process is presented. The study contains microphotos of ferriferous haematite raw material particles surface before and after completing the modifying process. The paper presents and describes the study of X-ray phase analysis diffractograms of enriched iron-containing wastes before and after the modification process. The current research proves that the enrichment ferriferous wastes particles modification process is possible and as a result it can be used as a filling for the development of new kinds of radioprotective composite materials.

Formulation and evaluation of gluten-free cookies from rice and green banana flour

2021 ◽  
Vol 11 (2) ◽  
pp. 720-726
Author(s):  
Maria Yarla parente ◽  
FABIANA LINHARES ◽  
RENATA ALBUQUERQUE COSTA ◽  
MÁRCIA FACUNDO ARAGÃO
Keyword(s):  
Chemical Composition ◽  
Purchase Intention ◽  
Rice Flour ◽  
Raw Material ◽  
Gluten Free ◽  
Autoimmune Pathology ◽  
Nutritional Characteristics ◽  
Banana Flour ◽  
Hedonic Scale ◽  
Green Banana

Celiac disease (CD) is defined as an autoimmune pathology mediated by specific antibodies and is associated with genetic factors, which causes an inflammatory process of the intestinal mucosa in response to gluten ingestion. A study was conducted to evaluate some gluten-free cookie formulations using rice and green banana flour as raw material, and to evaluate the acceptance and chemical composition of the cookies elaborated. Three different cookie formulations were prepared to contain 100% rice flour, 50% rice flour and 50% green banana flour and 100% green banana flour. The following sensory attributes were evaluated: crispness, flavor, and overall impression, using the 9-point hedonic scale and purchase intention using the 5-point structured scale, to check the acceptance of cookies. The chemical composition of the formulation most accepted by sensory analysis was quantified. Sensory evaluation showed that all cookie formulations were accepted; however, the increase of the green banana flour content has resulted in lower acceptance, which may be due to the slightly bitter flavor that green banana flour gives the product. The most accepted cookie formulation had 15.78% protein, 0.80% ash, 4.31% moisture content, 12.35% lipid, and 66.77% carbohydrate. These nutritional characteristics are following Brazilian legislation. Therefore, all cookie formulations have marketing potential, which is very important, especially for people with gluten sensitivity.

IMPACT OF INNOVATIVE METHOD OF PREPARING TOBACCO LEAVES FOR DRYING ON THE BASIC PARAMETERS OF QUALITY OF TOBACCO RAW MATERIAL

2019 ◽  
Author(s):  
Е.Е. Ульянченко
Keyword(s):  
Chemical Composition ◽  
Quality Indicators ◽  
Raw Materials ◽  
Raw Material ◽  
Tobacco Leaves ◽  
Commercial Grade ◽  
Innovative Method ◽  
Main Indicator ◽  
Basic Parameters

Исследовано влияние приема прорезания средней жилки на основные качественные показатели табачного сырья. Исследования проводили на листьях основных сортотипов табака Трапезонд и Остролист по массовым ломкам. Прорезание жилки осуществляли на инновационном оборудовании экспериментальном образце линии подготовки листьев табака к сушке ЛПТС360 (ВНИИТТИ, Краснодар). Качество табачного сырья с прорезанной жилкой определяли по товарным сортам, технологическим и курительным свойствам, химическому составу по методикам лабораторного контроля ВНИИТТИ. Инновационный способ подготовки табака к сушке в едином потоке с применением технологического оборудования, включающего прорезатель, выявил положительный технологический результат. Установлена эффективность приема прорезания средней жилки: срок естественной сушки листьев с прорезанной жилкой сократился в 2,5 раза выход 1го товарного сорта сырья составил 74,60 87,93 выход волокна сырья с прорезанной жилкой превышает минимальное значение технологических норм (75) в 1,15 1,26 раз условный расход сырья на единицу курительных изделий меньше норматива на 6 25 улучшен основной показатель химического состава табачного сырья (число Шмука) в 1,6 4,6 раза у сортотипа Трапезонд, в 1,2 1,5 раза у сортотипа Остролист дегустационные свойства сырья не ухудшились. Инновационный способ подготовки листьев табака к сушке, включающий прием прорезания средней жилки, рекомендуется для применения в производстве табачного сырья. The influence of middle vein cutting method on the main quality indicators of tobacco raw materials is studied. Studies were carried out on the leaves of the main varieties of tobacco Trapezond and Ostrolist, on mass breakdowns. Vein cutting was carried out on the innovative equipment of the line of preparation of tobacco leaves for drying LPTS360 (GNU VNIITTI RAA, Krasnodar). The quality of tobacco raw materials with a cut vein was determined by commercial grades, technological and Smoking properties, chemical composition in accordance with the methods VNIITTI. An innovative method of preparing tobacco for drying in a single stream with the use of technological equipment, including a cutter, revealed a positive technological result. The period of natural drying of leaves with cut veins decreased by 2,5 times. The yield of the 1st commercial grade of raw materials was 74,60 87,93. The output of the fiber raw material with cut vein exceeds the minimum value of technological norms (75) in 1,15 1,26 times. Conditional consumption of raw materials per unit of Smoking products is less than the norm by 6 25. The method of cutting the middle vein of the leaves improves the main indicator in the chemical composition of tobacco raw materials (Schmuck ratio) 1,6 4,6 times in the variety Trapezond and 1,2 1,5 times in the variety Ostrolist. The tasting properties of raw materials have not deteriorated. Analysis of raw material quality indicators showed that the innovative method of cutting the middle vein is effective and recommended for use in the production of tobacco raw materials.

Sign in / Sign up

Export Citation Format

Share Document