scholarly journals Sodium Metasilicate Cemented Analogue Material and Its Mechanical Properties

2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
Songlin Yue ◽  
Yanyu Qiu ◽  
Pengxian Fan ◽  
Pin Zhang ◽  
Ning Zhang
Keyword(s):  
Complex Geometry ◽  
Sodium Metasilicate ◽  
Raw Material ◽  
Fine Aggregate ◽  
Regression Equations ◽  
Deformation And Failure ◽  
Orthogonal Experiments ◽  
Low Modulus ◽  
New Type ◽  
The Relationship

Analogue material with appropriate properties is of great importance to the reliability of geomechanical model test, which is one of the mostly used approaches in field of geotechnical research. In this paper, a new type of analogue material is developed, which is composed of coarse aggregate (quartz sand and/or barite sand), fine aggregate (barite powder), and cementitious material (anhydrous sodium silicate). The components of each raw material are the key influencing factors, which significantly affect the physical and mechanical parameters of analogue materials. In order to establish the relationship between parameters and factors, the material properties including density, Young’s modulus, uniaxial compressive strength, and tensile strength were investigated by a series of orthogonal experiments with hundreds of samples. By orthogonal regression analysis, the regression equations of each parameter were obtained based on experimental data, which can predict the properties of the developed analogue materials according to proportions. The experiments and applications indicate that sodium metasilicate cemented analogue material is a type of low-strength and low-modulus material with designable density, which is insensitive to humidity and temperature and satisfies mechanical scaling criteria for weak rock or soft geological materials. Moreover, the developed material can be easily cast into structures with complex geometry shapes and simulate the deformation and failure processes of prototype rocks.

scholarly journals Biological inter-dependencies in 3D printing: Larvae scaffold excavation of high filigree clay structures

2021 ◽  
Author(s):  
◽  
Mark Bagley
Keyword(s):  
3D Printing ◽  
Complex Geometry ◽  
Ceramic Materials ◽  
Shell Structures ◽  
Secondary Material ◽  
Novel Approach ◽  
Design And Manufacturing ◽  
New Type ◽  
Technological Constraints ◽  
The Relationship

<p>Ceramic 3D printing has emerged in recent years as a new method for working with age-old material, a blend of the digital and analog that breeds a new type of artisan. Working with clay in an FDM extrusion system presents a number of challenges due to the nature of the material, restricting the forms that can be produced to rudimentary levels of ornament and shape. This research tackles the issue of resolution and thickness when creating and designing shell structures from ceramic materials, notably when 3D printing is used for complex geometry. This research aims to navigate these material and technological constraints by designing a novel approach to support scaffolds using a secondary material. This secondary material serves as an organic encasement for the ceramic object, and nature is treated as a co-collaborator in the excavation and controlled curing of a high filigree clay structure. By introducing edible bio matter and/or cellulose solutions, this encourages a new relationship with nature as a tool and co-author, becoming a stakeholder in the final result. This research examines the relationship between human, machine, and nature in the design and manufacturing of products.</p>

scholarly journals Biological inter-dependencies in 3D printing: Larvae scaffold excavation of high filigree clay structures

2021 ◽  
Author(s):  
◽  
Mark Bagley
Keyword(s):  
3D Printing ◽  
Complex Geometry ◽  
Ceramic Materials ◽  
Shell Structures ◽  
Secondary Material ◽  
Novel Approach ◽  
Design And Manufacturing ◽  
New Type ◽  
Technological Constraints ◽  
The Relationship

<p>Ceramic 3D printing has emerged in recent years as a new method for working with age-old material, a blend of the digital and analog that breeds a new type of artisan. Working with clay in an FDM extrusion system presents a number of challenges due to the nature of the material, restricting the forms that can be produced to rudimentary levels of ornament and shape. This research tackles the issue of resolution and thickness when creating and designing shell structures from ceramic materials, notably when 3D printing is used for complex geometry. This research aims to navigate these material and technological constraints by designing a novel approach to support scaffolds using a secondary material. This secondary material serves as an organic encasement for the ceramic object, and nature is treated as a co-collaborator in the excavation and controlled curing of a high filigree clay structure. By introducing edible bio matter and/or cellulose solutions, this encourages a new relationship with nature as a tool and co-author, becoming a stakeholder in the final result. This research examines the relationship between human, machine, and nature in the design and manufacturing of products.</p>

THE MODEL FOR MANAGING INVESTMENTS IN THE MOSCOW ENVIRONMENT BASED ON A POWER REGRESSION EQUATION

2020 ◽  
Vol 2 (7) ◽  
pp. 91-99
Author(s):  
E. V. KOSTYRIN ◽  
◽  
M. S. SINODSKAYA ◽  
Keyword(s):  
Solid Waste ◽  
Influencing Factors ◽  
Pair Correlation ◽  
Approximation Error ◽  
Regression Equation ◽  
Regression Equations ◽  
The Impact ◽  
The Relationship ◽  
Average Approximation ◽  
Average Approximation Error

The article analyzes the impact of certain factors on the volume of investments in the environment. Regression equations describing the relationship between the volume of investment in the environment and each of the influencing factors are constructed, the coefficients of the Pearson pair correlation between the dependent variable and the influencing factors, as well as pairwise between the influencing factors, are calculated. The average approximation error for each regression equation is determined. A correlation matrix is constructed and a conclusion is made. The developed econometric model is implemented in the program of separate collection of municipal solid waste (MSW) in Moscow. The efficiency of the model of investment management in the environment is evaluated on the example of the growth of planned investments in the activities of companies specializing in the export and processing of solid waste.

PSVI-8 Meta-regression Analysis to Determine the Relationship Between Growing Pig Body Weight and Variation

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 218-219
Author(s):  
Andres Fernando T Russi ◽  
Mike D Tokach ◽  
Jason C Woodworth ◽  
Joel M DeRouchey ◽  
Robert D Goodband ◽  
...  
Keyword(s):  
Body Weight ◽  
Regression Analysis ◽  
Sample Size ◽  
Polynomial Regression ◽  
Data Sets ◽  
Regression Equations ◽  
Prediction Equations ◽  
Data Set ◽  
Rate Of Increase ◽  
The Relationship

Abstract The swine industry has been constantly evolving to select animals with improved performance traits and to minimize variation in body weight (BW) in order to meet packer specifications. Therefore, understanding variation presents an opportunity for producers to find strategies that could help reduce, manage, or deal with variation of pigs in a barn. A systematic review and meta-analysis was conducted by collecting data from multiple studies and available data sets in order to develop prediction equations for coefficient of variation (CV) and standard deviation (SD) as a function of BW. Information regarding BW variation from 16 papers was recorded to provide approximately 204 data points. Together, these data included 117,268 individually weighed pigs with a sample size that ranged from 104 to 4,108 pigs. A random-effects model with study used as a random effect was developed. Observations were weighted using sample size as an estimate for precision on the analysis, where larger data sets accounted for increased accuracy in the model. Regression equations were developed using the nlme package of R to determine the relationship between BW and its variation. Polynomial regression analysis was conducted separately for each variation measurement. When CV was reported in the data set, SD was calculated and vice versa. The resulting prediction equations were: CV (%) = 20.04 – 0.135 × (BW) + 0.00043 × (BW)2, R2=0.79; SD = 0.41 + 0.150 × (BW) - 0.00041 × (BW)2, R2 = 0.95. These equations suggest that there is evidence for a decreasing quadratic relationship between mean CV of a population and BW of pigs whereby the rate of decrease is smaller as mean pig BW increases from birth to market. Conversely, the rate of increase of SD of a population of pigs is smaller as mean pig BW increases from birth to market.

scholarly journals Comparison of the Effects of Conching Parameters on the Contents of Three Dominant Flavan3-ols, Rheological Properties and Sensory Quality in Chocolate Milk Mass Based on Liquor from Unroasted Cocoa Beans

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2502
Author(s):  
Bogumiła Urbańska ◽  
Hanna Kowalska ◽  
Karolina Szulc ◽  
Małgorzata Ziarno ◽  
Irina Pochitskaya ◽  
...  
Keyword(s):  
Rheological Properties ◽  
Yield Stress ◽  
Sensory Quality ◽  
Raw Material ◽  
Antioxidant Compounds ◽  
Chocolate Milk ◽  
Cocoa Beans ◽  
Variable Parameters ◽  
The Relationship ◽  
Manufacturing Parameters

The content of polyphenols in chocolate depends on many factors related to the properties of raw material and manufacturing parameters. The trend toward developing chocolates made from unroasted cocoa beans encourages research in this area. In addition, modern customers attach great importance to how the food they consume benefits their bodies. One such benefit that consumers value is the preservation of natural antioxidant compounds in food products (e.g., polyphenols). Therefore, in our study we attempted to determine the relationship between variable parameters at the conching stage (i.e., temperature and time of) and the content of dominant polyphenols (i.e.,catechins, epicatechins, and procyanidin B2) in chocolate milk mass (CMM) obtained from unroasted cocoa beans. Increasing the conching temperature from 50 to 60 °C decreased the content of three basic flavan-3-ols. The highest number of these compounds was determined when the process was carried out at 50 °C. However, the time that caused the least degradation of these compounds differed. For catechin, it was 2 h; for epicatechin it was 1 h; and for procyanidin it was 3 h. The influence of both the temperature and conching time on the rheological properties of chocolate milk mass was demonstrated. At 50 °C, the viscosity and the yield stress of the conched mass showed its highest value.

scholarly journals Comparison of the Concentration of Risk Elements in Alluvial Soils Determined by pXRF In Situ, in the Laboratory, and by ICP-OES

Agronomy ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 938
Author(s):  
Ladislav Menšík ◽  
Lukáš Hlisnikovský ◽  
Pavel Nerušil ◽  
Eva Kunzová
Keyword(s):  
Precision Agriculture ◽  
Alluvial Soil ◽  
Coefficient Of Determination ◽  
Fast Method ◽  
Agricultural Practice ◽  
Regression Equations ◽  
Icp Oes ◽  
Risk Elements ◽  
The Relationship

The aim of the study was to compare the concentrations of risk elements (As, Cu, Mn, Ni, Pb, Zn) in alluvial soil, which were measured by a portable X-ray fluorescence analyser (pXRF) in situ (FIELD) and in the laboratory (LABORATORY). Subsequently, regression equations were developed for individual elements through the method of construction of the regression model, which compare the results of pXRF with classical laboratory analysis (ICP-OES). The accuracy of the measurement, expressed by the coefficient of determination (R2), was as follows in the case of FIELD–ICP-OES: Pb (0.96), Zn (0.92), As (0.72), Mn (0.63), Cu (0.31) and Ni (0.01). In the case of LABORATORY–ICP-OES, the coefficients had values: Pb (0.99), Zn (0.98), Cu and Mn (0.89), As (0.88), Ni (0.81). A higher dependence of the relationship was recorded between LABORATORY–ICP-OES than between FIELD–ICP-OES. An excellent relationship was recorded for the elements Pb and Zn, both for FIELD and LABORATORY (R2 higher than 0.90). The elements Cu, Mn and As have a worse tightness in the relationship; however, the results of the model have shown its applicability for common use, e.g., in agricultural practice or in monitoring the quality of the environment. Based on our results, we can say that pXRF instruments can provide highly accurate results for the concentration of risk elements in the soil in real time for some elements and meet the principle of precision agriculture: an efficient, accurate and fast method of analysis.

scholarly journals Synthesis of DHA/EPA Ethyl Esters via Lipase-Catalyzed Acidolysis Using Novozym® 435: A Kinetic Study

Catalysts ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 565 ◽  
Author(s):  
Chia-Hung Kuo ◽  
Chun-Yung Huang ◽  
Chien-Liang Lee ◽  
Wen-Cheng Kuo ◽  
Shu-Ling Hsieh ◽  
...  
Keyword(s):  
Ethyl Ester ◽  
Ethyl Esters ◽  
Raw Material ◽  
Maximum Reaction Rate ◽  
Mechanism Model ◽  
Maximum Reaction ◽  
Substrate Ratio ◽  
Free Fatty Acid Form ◽  
The Relationship ◽  
Predictive Relationship

DHA/EPA ethyl ester is mainly used in the treatment of arteriosclerosis and hyperlipidemia. In this study, DHA+EPA ethyl ester was synthesized via lipase-catalyzed acidolysis of ethyl acetate (EA) with DHA+EPA concentrate in n-hexane using Novozym® 435. The DHA+EPA concentrate (in free fatty acid form), contained 54.4% DHA and 16.8% EPA, was used as raw material. A central composite design combined with response surface methodology (RSM) was used to evaluate the relationship between substrate concentrations and initial rate of DHA+EPA ethyl ester production. The results indicated that the reaction followed the ordered mechanism and as such, the ordered mechanism model was used to estimate the maximum reaction rate (Vmax) and kinetic constants. The ordered mechanism model was also combined with the batch reaction equation to simulate and predict the conversion of DHA+EPA ethyl ester in lipase-catalyzed acidolysis. The integral equation showed a good predictive relationship between the simulated and experimental results. 88–94% conversion yields were obtained from 100–400 mM DHA+EPA concentrate at a constant enzyme activity of 200 U, substrate ratio of 1:1 (DHA+EPA: EA), and reaction time of 300 min.

Dependency in Africa: Stages of African Political Economy

1983 ◽  
Vol 9 (2) ◽  
pp. 229-247 ◽  
Author(s):  
Amechi Okolo
Keyword(s):  
Political Economy ◽  
International System ◽  
Raw Material ◽  
The West ◽  
Cheap Labour ◽  
History Of ◽  
The Common ◽  
First Contact ◽  
The Impact ◽  
The Relationship

This paper traces the history of the relationship between Africa and the West since their first contact brought about by the outward thrust of the West, under the impetus of rising capitalism, in search of cheap labour and cheap raw material for its industries and expanding markets for its industrial products, both of which could be better ensured through domination and exploitation. The paper identifies five successive stages that African political economy has passed through under the impact of this relationship, each phase qualitatively different from the other but all having the common characteristic of domination-dependence syndrome, and each phase having been dictated by the dynamics of capitalism in different eras and by the dominant forces in the changing international system. Its finding is that the way to the latest stage, the dependency phase, was paved by the progressive proletarianization of the African peoples and the maintenance of an international peonage system. It ends by indicating the direction in which Africa can make a beginning to break out of dependency and achieve liberation.

Material Properties and Design Aspects of Folding Bicycle Frame

2011 ◽  
Vol 264-265 ◽  
pp. 777-782 ◽  
Author(s):  
M.A. Maleque ◽  
M.S. Hossain ◽  
S. Dyuti
Keyword(s):  
Material Properties ◽  
Raw Material ◽  
New Materials ◽  
Materials Properties ◽  
Advantages And Disadvantages ◽  
Bicycle Frame ◽  
Successful Design ◽  
Future Direction ◽  
The Relationship ◽  
Comprehensive Study

successful design of folding bicycle should take into account the function, material properties, and fabrication process. There are some other factors that should be considered in anticipating the behavior of materials for folding bicycle. In order to understand the relationship between material properties and design of a folding bicycle and also for the future direction in new materials with new design, a comprehensive study on the design under different conditions are essential. Therefore, a systematic study on the relationship between material properties and design for folding bicycle has been performed. The advantages and disadvantages matrix between conventional bicycle and folding bicycle is presented for better understanding of the materials properties and design. It was found that the materials properties of the folding bicycle frame such as fatigue and tensile strength are the important properties for the better performance of the frame. The relationship between materials properties and design is not straight forward because the behavior of the material in the finished product could be different from that of the raw material. The swing hinge technique could be a better technique in the design for the folding bicycle frame.

Agglomeration Technologies of Processing Powder Wastes

2015 ◽  
Vol 244 ◽  
pp. 121-129
Author(s):  
Marian Peciar ◽  
Roman Fekete ◽  
Peter Peciar
Keyword(s):  
Research Work ◽  
Operating Conditions ◽  
Airborne Particles ◽  
Raw Material ◽  
Production Cycle ◽  
Shear Forces ◽  
Material Resources ◽  
New Type ◽  
Two Phases ◽  
High Technologies

This article deals with the presentation of modern applications for processing powdered, primarily hazardous, waste to an agglomeration form appropriate for subsequent processing by classical methods, for example in the construction, automotive and consumer goods industries. The aim of the research work was to set appropriate operating conditions in order to appreciate currently non-processable wastes resulting from the intensive production of often extremely expensive materials. Technologies which enable returning powder waste back into the primary production cycle were developed and experimentally tested, thus saving raw material resources. When necessary for the fixing of fine airborne particles with a problematic compacting curve (hard to compress, repulsive due to the surface charge) extrusion processes using a patented technology enabling controlled modification of shear forces in the extrusion zone were successfully applied. A new type of axial extruder allows the elimination of the liquid phase and as a result prevents the clogging of the extrusion chamber. In the case of need for granulation of sensitive materials (for example pharmaceuticals not allowing the addition of any kind of agglomerating fluid or reacting strongly in the contact of the two phases), a process of compaction between rolls with different profiled surface was successfully applied. The developed high technologies and the resulting products thus represent a major contribution to environmental protection in the context of not only the work but also the communal environment.

Sign in / Sign up

Export Citation Format

Share Document