Preparation and Characterization of Bisphenol a Polycarbonate Facilitated by Supercritical Impinging Stream

2014 ◽  
Vol 875-877 ◽  
pp. 101-105
Author(s):  
Yang Xiao ◽  
Ai Qing Zhang
Keyword(s):  
Mass Transfer ◽  
Bisphenol A ◽  
Gel Permeation Chromatography ◽  
Diphenyl Carbonate ◽  
Infrared Spectrophotometry ◽  
Bisphenol A Polycarbonate ◽  
Synthetic Process ◽  
Ft Ir ◽  
C Nmr

Based on the supercritical impinging stream technique, a novel synthetic process for preparing aromatic polycarbonate (PC) by transesterification between bisphenol-A (BPA) and diphenyl carbonate (DPC) was developed. Supercritical carbon dioxide (ScCO2) is an excellent plasticizing agent and a good solvent for phenol, the by-product of the reaction. Impinging stream can markedly enhance heat and mass transfer, especially mass transfer between phases. In this process, phenol formed from the reaction was dissolved and diffused into ScCO2 phase and the transfer process were accelerated through the impingement of two flows. The structure of the product was characterized by Fourier transform infrared spectrophotometry (FT-IR), 1H-nuclear magnetic resonance (NMR) and 13C-NMR measurements. Thermal analysis was measured by a differential scanning calorimeter (DSC). The PC molecular weight (MW) was determined by gel permeation chromatography (GPC) and can reach up to 4.28×104 g/mol.

Thermo-mechanical and surface properties of POSS reinforced structurally different diamine cured epoxy nanocomposites

RSC Advances ◽  
2014 ◽  
Vol 4 (85) ◽  
pp. 45433-45441 ◽  
Author(s):  
K. Sethuraman ◽  
P. Prabunathan ◽  
M. Alagar
Keyword(s):  
Bisphenol A ◽  
Surface Properties ◽  
Nmr Spectra ◽  
Epoxy Nanocomposites ◽  
H Nmr ◽  
Ft Ir ◽  
C Nmr

In the present study three structurally different diamines namely bisphenol-A based ether diamine, octane diol based ether diamine, and capron based diamine were synthesized and characterized using FT-IR, 1H-NMR and 13C-NMR spectra.

scholarly journals Functional Aromatic Poly(1,3,4-Oxadiazole-Ether)s with Benzimidazole Pendants: Synthesis, Thermal and Dielectric Studies

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Shimoga D. Ganesh ◽  
Vasantakumar K. Pai ◽  
Mahadevappa Y. Kariduraganavar ◽  
Madhu B. Jayanna
Keyword(s):  
Carboxylic Acid ◽  
Average Molecular Weight ◽  
Analytical Techniques ◽  
Gel Permeation Chromatography ◽  
Electrical Contacts ◽  
Dielectric Studies ◽  
Weight Average Molecular Weight ◽  
Nucleophilic Displacement ◽  
Ft Ir

Poly(1,3,4-oxadiazole-ether) with reactive carboxylic acid pendants was synthesized from solution polymerization via nucleophilic displacement polycondensation among 2,5-bis(4-fluorophenyl)-1,3,4-oxadiazole (BFPOx) and 4,4′-bis(4-hydroxyphenyl) valeric acid (BHPA). Without altering the polymeric segments, benzimidazole modified poly(1,3,4-oxadiazole-ether)s were prepared by varying stoichiometric ratios of 1,2-phenylenediamine. The molecular structural characterization of these polymers was achieved by, FT-IR, NMR, TGA, elemental analysis, and analytical techniques. The weight-average molecular weight of virgin polymer with carboxylic acid functionality was determined by gel permeation chromatography (GPC) and was found to be 22400 (Mw/Mn=2.07). All the synthesized polyethers were compressed into pellets and electrical contacts were established to perform dielectric properties.

Surface Grafting Modification of Silk Fibroin by Atom Transfer Radical Polymerization

2008 ◽  
Vol 373-374 ◽  
pp. 629-632 ◽  
Author(s):  
Tie Ling Xing ◽  
Hai Jiang Wang ◽  
Zhan Xiong Li ◽  
Guo Qiang Chen
Keyword(s):  
Silk Fibroin ◽  
Gel Permeation Chromatography ◽  
Catalyst System ◽  
Hydroxyl Groups ◽  
Amino Groups ◽  
Grafting Modification ◽  
Antibacterial Surface ◽  
Ft Ir ◽  
Tertiary Amino

In this work, surface modification of silk fibroin was conducted by grafting dimethylaminoethyl methacrylate (DMAEMA) via ATRP to produce well controlled grafting silk. First, the amino groups and hydroxyl groups on the side chains of the silk fibroin reacted with 2-bromoisobutyryl bromide (BriB-Br) to obtain efficient initiator for ATRP. Subsequently, the functional silk fibroin was used as macroinitiator of DMAEMA in 1,2-dichlorobenzene in conjunction with CuBr/N,N,N',N",N" -pentamethyldiethylenetriamine (PMDETA) as a catalyst system. FT-IR characterization of the modified silk substrate showed a peak corresponding to DMAEMA indicating that the polymer had been formed on the silk surface. Following the polymerization, the tertiary amino groups on the grafted silk fibroin were quaternized to produce a large concentration of quaternary ammonium groups, which endowed the silk substrate with potential antibacterial surface. The graft chains were cleaved by acid hydrolysis and analyzed by gel permeation chromatography (GPC). The GPC results indicated that the graft layer were well-controlled.

Design, preparation and characterization of a new ionic liquid, 1,3-disulfonic acid benzimidazolium chloride, as an efficient and recyclable catalyst for the synthesis of tetrahydropyridine under solvent-free conditions

RSC Advances ◽  
2015 ◽  
Vol 5 (83) ◽  
pp. 67405-67411 ◽  
Author(s):  
Mohsen Abbasi
Keyword(s):  
Ionic Liquid ◽  
Mass Spectra ◽  
Recyclable Catalyst ◽  
Solvent Free ◽  
Disulfonic Acid ◽  
H Nmr ◽  
Solvent Free Conditions ◽  
Ft Ir ◽  
C Nmr

In the present work, 1,3-disulfonic acid benzimidazolium chloride as a new ionic liquid, is synthesized, and characterized by studying its FT-IR, 1H NMR, 13C NMR as well as mass spectra.

Cationic copolymerization of 1,3-pentadiene with α-pinene

2014 ◽  
Vol 34 (7) ◽  
pp. 583-589 ◽  
Author(s):  
Ai-Yuan Li ◽  
Xiang-Dong Sun ◽  
Hui-Bo Zhang ◽  
Yong-Chun Zhang ◽  
Bin Wang ◽  
...  
Keyword(s):  
Average Molecular Weight ◽  
Gel Permeation Chromatography ◽  
Polymerization Temperature ◽  
Scanning Calorimetry ◽  
Gardner Color ◽  
H Nmr ◽  
Cationic Copolymerization ◽  
Ft Ir ◽  
Better Than ◽  
C Nmr

Abstract The cationic copolymerization of 1,3-pentadiene (PD) with α-pinene (AP) initiated by aluminum trichloride (AlCl3) was carried out in N-pentane solvent. The effects of the polymerization temperature and the comonomer composition on the yield of the copolymer, softening point, Gardner color scale and number-average molecular weight (Mn) are discussed. The performance of the copolymer was better than that of AP homopolymer (PAP) and PD homopolymer (PPD). The structure of the copolymer was characterized by Fourier transform infrared spectroscopy (FT-IR), 1H-nuclear magnetic resonance (1H-NMR), 13C-NMR, differential scanning calorimetry (DSC) and gel permeation chromatography (GPC). In addition, the reactivity ratios for AP (M1) and PD (M2) determined by the Kelen-Tudos method from low-conversion data are r1=0.58 and r2=5.92, respectively.

Synthesis and characterization of sulfonated telechelic bisphenol A polycarbonate ionomers

2011 ◽  
Vol 71 (10) ◽  
pp. 1001-1007 ◽  
Author(s):  
Martino Colonna ◽  
Corrado Berti ◽  
Enrico Binassi ◽  
Maurizio Fiorini ◽  
Simone Sullalti ◽  
...  
Keyword(s):  
Bisphenol A ◽  
Synthesis And Characterization ◽  
Bisphenol A Polycarbonate

Preparation and characterization of some new diaminobisimides

1994 ◽  
Vol 6 (4) ◽  
pp. 287-301 ◽  
Author(s):  
D G Hawthorne ◽  
J H Hodgkin ◽  
M B Jackson ◽  
J W Loder ◽  
T C Morton
Keyword(s):  
Gel Permeation Chromatography ◽  
Aromatic Diamine ◽  
Side Reactions ◽  
Amino Groups ◽  
Aromatic Diamines ◽  
Reaction Conditions ◽  
Condensation Polymers ◽  
Yield And Purity ◽  
C Nmr

A series of stable diaminobisimides (DABIs) has been prepared as alternatives to simple aromatic diamines for use in the preparation of condensation polymers. These DABIs were prepared by reacting two moles of an aromatic diamine with one mole of a dianhydride under conditions that minimize side reactions and the formation of oligomers. In many cases, the pure DABI consisting of two moles of the diamine and one mole of the dianhydride (i.e. the 2:1 product) can be obtained free of oligomers (i.e. the 3:2, 4:3 etc products). The studies have shown that the major factor determining the yield and purity of a DABI is the extent of conjugation between the two amino groups in the starting diamine: to a lesser extent steric effects in the diamines also influence the product composition. The reaction conditions necessary to produce these new DABIs are described together with extensive characterization of these materials by FTIR,1H and 13C NMR and gel permeation chromatography. The results indicate that pure DABIs are more manageable materials than the impure. insoluble materials previously described in the literature and can be used successfully to produce useful high-temperature stable polymers.

scholarly journals Synthesis and Spectroscopic Characterization of Some New Biological Active Azo–Pyrazoline Derivatives

2012 ◽  
Vol 9 (3) ◽  
pp. 1613-1622 ◽  
Author(s):  
Farouq E. Hawaiz ◽  
Mohammad K. Samad
Keyword(s):  
Addition Reaction ◽  
Coupling Reaction ◽  
Spectroscopic Characterization ◽  
Hydroxyl Group ◽  
Significant Activity ◽  
H Nmr ◽  
Ft Ir ◽  
High Yields ◽  
C Nmr

A number of 3-[4-(benzyloxy)-3-(2-Chlorophenylazo)-phenyl]-5-(substituted-phenyl)-1-substituted-2-pyrazolines( 4a-j) and (5a-j) have been synthesized by diazotization of 2-chloroaniline and its coupling reaction with 4-hydroxy acetophenone, followed by benzyloxation of the hydroxyl group to give the substrate [4-benzyloxy-3-(2-chlorophenylazo)-acetophenone (1)].The prepared starting material (1) has been reacted with different substituted benzaldehydes to give a new series of chalcone derivatives 1-[(4-benzyloxy)-3-(2-chloro-phenylazo)-phenyl]-3-(substituted phenyl)-2-propen-1-one (3a-j), in high yields and in a few minutes, and the later compounds were treated with hydrazine hydrate according to Michael addition reaction to afford a new biolological active target compounds (4a-j) and (5a-j). Furthermore, The structures of the newly synthesized compounds were confirmed by FT-IR,13C-NMR,13C-DEPT &1H-NMR spectral data. The chalcone and pyrazoline derivatives were evaluated for their anti bacterial activity againstEscherichia colias gram negative andStaphylococcus aureusas gram positive, the results showed significant activity against both types of bacteria.

scholarly journals Synthesis of poly(γ-tert-butyl L-glutamate): influence of polymerization conditions

2019 ◽  
Vol 16 (3) ◽  
pp. 25
Author(s):  
Phung Thi Thuy Dung ◽  
Nguyen Thi Le Thu
Keyword(s):  
Ring Opening ◽  
Gel Permeation Chromatography ◽  
Attenuated Total Reflection ◽  
Resonance Spectroscopy ◽  
Reaction Conditions ◽  
Tert Butyl ◽  
Ft Ir ◽  
Hydrolysis Of ◽  
Polymerization Conditions

This work presents the synthesis and characterization of poly(γ-tert-butyl L-glutamate) (PtBuLG) via a living ring-opening polymerization procedure of γ-tert-butyl L-glutamate N-carboxyanhydride (tBuLG-NCA). The reaction conditions were investigated to optimize the polymerization yield and molecular weight polydispersity. The synthesized PtBuLG was characterized using nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC) and attenuated total reflection-Fourier transform infrared (ATR FT-IR. Finally, hydrolysis of PtBuLG resulted in poly(L-glutamic acid) (PLGA).

Sign in / Sign up

Export Citation Format

Share Document