Analysis on the Bias of Seismic Ground Motion Prediction in a Shallow Stiff-Soil Site by LSSRL-1 Program

2014 ◽  
Vol 915-916 ◽  
pp. 18-21
Author(s):  
Zhuo Shi Chen ◽  
Xiao Ming Yuan ◽  
Shang Jiu Meng
Keyword(s):  
Shear Wave ◽  
Ground Motion ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Dynamic Parameters ◽  
Ground Motion Prediction ◽  
Blind Prediction ◽  
Soil Site ◽  
Parkfield Earthquake ◽  
Stiff Soil

The main causes of the ground motion blind prediction bias are the variability of the adopted program, the shear-wave velocity of the site, and the soil nonlinear dynamic parameters. By considering the variability of shear-wave velocity and the dynamic parameters, this essay used LSSRLI-1 Codes and Mw6.0 seismic record of Parkfield earthquake to calculate ground responses of 9 different conditions at Turkey Flat site. The authors believe that the variability of shear-wave velocity caused the dominant impact to the blind prediction of this shallow stiff-soil site. That impact is much greater than that of the dynamic parameters. LSSRLI-1 program may either underestimate the ground response of the shallow stiff-soil site or may overestimate it, so we should combine the specific site conditions and a large amounts of data to do the further analysis.

Ground motion prediction equation for Taiwan subduction zone earthquakes

2020 ◽  
Vol 36 (3) ◽  
pp. 1331-1358 ◽  
Author(s):  
Van-Bang Phung ◽  
Chin Hsiung Loh ◽  
Shu Hsien Chao ◽  
Norman A Abrahamson
Keyword(s):  
Shear Wave ◽  
Ground Motion ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Prediction Equation ◽  
Motion Prediction ◽  
Ground Motion Prediction Equation ◽  
Ground Motion Prediction ◽  
Magnitude Scaling ◽  
Site Term

A ground motion prediction equation (GMPE) is presented for computing the median and standard deviation of peak ground acceleration (PGA) and 5% damped pseudo-spectral acceleration (PSA) for periods between 0.01 s and 5.0 s for probabilistic seismic hazard analysis (PSHA) and engineering applications in Taiwan. An integrated strong motion dataset consisting of two subduction earthquake regions was selected from 3314 recordings from Taiwan with M4.5 to M7.1 and 3376 recordings from Japan with M6.5 to M9.1. This dataset was then used to validate, and refit where necessary, the function form provided by Abrahamson et al. for application to Taiwan subduction earthquakes. The proposed model accounts for the extrapolation behaviors associated with the large-magnitude scaling and the near-source scaling terms, both of which were developed empirically by using the combined Taiwan–Japan dataset. The distance attenuation and site term were developed specifically for the Taiwan region. The site term is based on two parameters; the time-averaged shear wave velocity of the top 30 m depth ( VS30) and the depth-to-the-shear wave velocity horizon of 1.0 km/s ( Z1.0).

Ground-Motion Prediction Equations for the Average Horizontal Component of PGA, PGV, and 5%-Damped PSA at Spectral Periods between 0.01 s and 10.0 s

2008 ◽  
Vol 24 (1) ◽  
pp. 99-138 ◽  
Author(s):  
David M. Boore ◽  
Gail M. Atkinson
Keyword(s):  
Shear Wave ◽  
Ground Motion ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Horizontal Component ◽  
Motion Prediction ◽  
Horizontal Distance ◽  
Ground Motion Prediction Equations ◽  
Prediction Equations ◽  
Ground Motion Prediction

This paper contains ground-motion prediction equations (GMPEs) for average horizontal-component ground motions as a function of earthquake magnitude, distance from source to site, local average shear-wave velocity, and fault type. Our equations are for peak ground acceleration (PGA), peak ground velocity (PGV), and 5%-damped pseudo-absolute-acceleration spectra (PSA) at periods between 0.01 s and 10 s. They were derived by empirical regression of an extensive strong-motion database compiled by the “PEER NGA” (Pacific Earthquake Engineering Research Center's Next Generation Attenuation) project. For periods less than 1 s, the analysis used 1,574 records from 58 mainshocks in the distance range from 0 km to 400 km (the number of available data decreased as period increased). The primary predictor variables are moment magnitude ( M), closest horizontal distance to the surface projection of the fault plane ( RJB), and the time-averaged shear-wave velocity from the surface to 30 m ( VS30). The equations are applicable for M=5–8, RJB<200 km, and VS30=180–1300 m/s.

scholarly journals Seismic hazard assessment and local site effect evaluation in Hanoi, Vietnam

2017 ◽  
Vol 17 (4B) ◽  
pp. 82-95
Author(s):  
Nguyen Anh Duong ◽  
Pham Dinh Nguyen ◽  
Vu Minh Tuan ◽  
Bui Van Duan ◽  
Nguyen Thuy Linh
Keyword(s):  
Seismic Hazard ◽  
Shear Wave ◽  
Ground Motion ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Peak Ground Acceleration ◽  
Site Effect ◽  
Local Site Effect ◽  
Ground Acceleration ◽  
Local Site

In this study, we have carried out the probabilistic seismic hazard analysis in Hanoi based on the latest seismotectonic data. The seismic hazard map shows peak ground acceleration values on rock corresponding to the 10% probability of exceedance in a 50-year time period (approximately return periods of 500 years). The calculated results reveal that the maximum ground acceleration can occur on rock in Hanoi is about 0.13 g corresponding to the shaking intensity level of VIII on the MSK-64 scale. The ground motion values calculated on rock vary according to the local site conditions. We have evaluated and corrected the local site effects on ground motion in Ha Dong district, Hanoi by using microtremor and borehole data. The Nakamura’s H/V spectral ratio method has been applied to establish a map of ground dominant periods in Ha Dong with a TS range of 0.6 - 1.2 seconds. The relatively high values of periods indicate that Ha Dong has soft soil and thick Quaternary sediments. The sediment thickness in Ha Dong is calculated to vary between 30 - 75 m based on ground dominant periods and shear wave velocity VS30 = 171 - 254 m/s. The results of local site effect on ground motion show that the 500-year return period peak ground acceleration in Ha Dong ranges from 0.13 g to 0.17 g. It is once again asserted that the seismic hazard in Hanoi is a matter of great concern, due not only to the relatively high ground acceleration, but also to the seismic characteristics of soil (low shear wave velocity, ground dominant period of approximately 1 second).

scholarly journals Risks of Solely Relying on VS30 in Ground Motion Response Studies

2018 ◽  
Vol 4 (12) ◽  
pp. 2937
Author(s):  
Amin Ghanbari ◽  
Younes Daghigh ◽  
Forough Hassanvand
Keyword(s):  
Shear Wave ◽  
Ground Motion ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Ground Surface ◽  
Earthquake Excitation ◽  
Site Class ◽  
Velocity Models ◽  
Average Shear ◽  
Classification Tool

The average shear wave velocity of the uppermost 30 m of earth (Vs30) is widely used in seismic geotechnical engineering and soil-structure interaction studies. In this regard, any given subsurface profile is assigned to a specific site class according to its average shear wave velocity. However, in a real-world scenario, entirely different velocity models could be considered in the same class type due to their identical average velocities. The objective of the present study is to underline some of the risks associated with solely using Vs30 as a classification tool. To do so, three imaginary soil profiles that are quite different in nature, but all with the same average Vs were considered and were subjected to the same earthquake excitation. Seismic records acquired at the ground surface demonstrated that the three sites have different ground motion amplifications. Then, the different ground responses were used to excite a five-story structure. Results confirmed that even sites from the same class can indeed exhibit different responses under identical seismic excitations. Our results demonstrated that caution should be practiced when large-contrast velocity models are involved as such profiles are prone to pronounced ground motion amplification. This study, which serves as link between soil dynamics and structural dynamics, warns practitioners about the risks associated with oversimplifying the subsurface profile. Such oversimplifications can potentially undermine the safety of existing or future structures.

scholarly journals Parametric Study of Local Site Response for Bedrock Ground Motion to Earthquake in Phuentsholing, Bhutan

2020 ◽  
Vol 12 (13) ◽  
pp. 5273 ◽  
Author(s):  
Karma Tempa ◽  
Raju Sarkar ◽  
Abhirup Dikshit ◽  
Biswajeet Pradhan ◽  
Armando Lucio Simonelli ◽  
...  
Keyword(s):  
Shear Wave ◽  
Ground Motion ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Soil Profile ◽  
Parametric Study ◽  
Site Response ◽  
Site Response Analysis ◽  
Response Analysis ◽  
Geophysical Study

Earthquakes, when it comes to natural calamities, are characteristically devastating and pose serious threats to buildings in urban areas. Out of multiple seismic regions in the Himalayas, Bhutan Himalaya is one that reigns prominent. Bhutan has seen several moderate-sized earthquakes in the past century and various recent works show that a major earthquake like the 2015 Nepal earthquake is impending. The southwestern city of Bhutan, Phuentsholing is one of the most populated regions in the country and the present study aims to explore the area using geophysical methods (Multispectral Analysis of Surface Waves (MASW)) for understanding possibilities pertaining to infrastructural development. The work involved a geophysical study on eight different sites in the study region which fall under the local area plan of Phuentsholing City. The geophysical study helps to discern shear wave velocity which indicates the soil profile of a region along with possible seismic hazard during an earthquake event, essential for understanding the withstanding power of the infrastructure foundation. The acquired shear wave velocity by MASW indicates visco-elastic soil profile down to a depth of 22.2 m, and it ranged from 350 to 600 m/s. A site response analysis to understand the correlation of bedrock rigidness to the corresponding depth was conducted using EERA (Equivalent-linear Earthquake Site Response Analysis) software. The amplification factors are presented for each site and maximum amplification factors are highlighted. These results have led to a clear indication of how the bedrock characteristics influence the surface ground motion parameters for the corresponding structure period. The results infer that the future constructional activity in the city should not be limited to two- to five-story buildings as per present practice. Apart from it, a parametric study was initiated to uncover whatever effects rigid bedrock has upon hazard parameters for various depths of soil profile up to 30 m, 40 m, 60 m, 80 m, 100 m, 120 m, 140 m, 160 m, 180 m and 200 m from the ground surface. The overriding purpose of doing said parametric study is centered upon helping the stack holders who can use the data for future development. Such a study is the first of its kind for the Bhutan region, which suffers from the unavailability of national seismic code, and this is a preliminary step towards achieving it.

Sign in / Sign up

Export Citation Format

Share Document